summaryrefslogtreecommitdiffhomepage
path: root/runsc/boot/vfs.go
AgeCommit message (Collapse)Author
2020-10-13[vfs2] Don't take reference in Task.MountNamespaceVFS2 and MountNamespace.Root.Dean Deng
This fixes reference leaks related to accidentally forgetting to DecRef() after calling one or the other. PiperOrigin-RevId: 336918922
2020-09-17Add VFS2 overlay support in runscFabricio Voznika
All tests under runsc are passing with overlay enabled. Updates #1487, #1199 PiperOrigin-RevId: 332181267
2020-09-08Honor readonly flag for root mountFabricio Voznika
Updates #1487 PiperOrigin-RevId: 330580699
2020-08-21[vfs] Allow mountpoint to be an existing non-directory.Ayush Ranjan
Unlike linux mount(2), OCI spec allows mounting on top of an existing non-directory file. PiperOrigin-RevId: 327914342
2020-08-21Make mounts ReadWrite first, then later change to ReadOnly.Nicolas Lacasse
This lets us create "synthetic" mountpoint directories in ReadOnly mounts during VFS setup. Also add context.WithMountNamespace, as some filesystems (like overlay) require a MountNamespace on ctx to handle vfs.Filesystem Operations. PiperOrigin-RevId: 327874971
2020-08-20[vfs] Create recursive dir creation util.Ayush Ranjan
Refactored the recursive dir creation util in runsc/boot/vfs.go to be more flexible. PiperOrigin-RevId: 327719100
2020-08-19Move boot.Config to its own packageFabricio Voznika
Updates #3494 PiperOrigin-RevId: 327548511
2020-08-07[vfs2] Fix tmpfs mounting.Ayush Ranjan
Earlier we were using NLink to decide if /tmp is empty or not. However, NLink at best tells us about the number of subdirectories (via the ".." entries). NLink = n + 2 for n subdirectories. But it does not tell us if the directory is empty. There still might be non-directory files. We could also not rely on NLink because host overlayfs always returned 1. VFS1 uses Readdir to decide if the directory is empty. Used a similar approach. We now use IterDirents to decide if the "/tmp" directory is empty. Fixes #3369 PiperOrigin-RevId: 325554234
2020-08-06Only register /dev/net/tun if supported.Dean Deng
PiperOrigin-RevId: 325266487
2020-08-03Plumbing context.Context to DecRef() and Release().Nayana Bidari
context is passed to DecRef() and Release() which is needed for SO_LINGER implementation. PiperOrigin-RevId: 324672584
2020-07-30Implement overlayfs_stale_read for vfs2.Jamie Liu
PiperOrigin-RevId: 324080111
2020-07-23Added stub FUSE filesystemRidwan Sharif
Allow FUSE filesystems to be mounted using libfuse. The appropriate flags and mount options are parsed and understood by fusefs.
2020-07-09Gate FUSE behind a runsc flagRidwan Sharif
This change gates all FUSE commands (by gating /dev/fuse) behind a runsc flag. In order to use FUSE commands, use the --fuse flag with the --vfs2 flag. Check if FUSE is enabled by running dmesg in the sandbox.
2020-07-08Add shared mount hints to VFS2Fabricio Voznika
Container restart test is disabled for VFS2 for now. Updates #1487 PiperOrigin-RevId: 320296401
2020-06-25Test that the fuse device can be openedRidwan Sharif
2020-06-25Moved FUSE device under the fuse directoryRidwan Sharif
2020-06-24Port /dev/net/tun device to VFS2.Nicolas Lacasse
Updates #2912 #1035 PiperOrigin-RevId: 318162565
2020-06-23Port /dev/tty device to VFS2.Nicolas Lacasse
Support is limited to the functionality that exists in VFS1. Updates #2923 #1035 PiperOrigin-RevId: 317981417
2020-06-11Add //pkg/sentry/fsimpl/overlay.Jamie Liu
Major differences from existing overlay filesystems: - Linux allows lower layers in an overlay to require revalidation, but not the upper layer. VFS1 allows the upper layer in an overlay to require revalidation, but not the lower layer. VFS2 does not allow any layers to require revalidation. (Now that vfs.MkdirOptions.ForSyntheticMountpoint exists, no uses of overlay in VFS1 are believed to require upper layer revalidation; in particular, the requirement that the upper layer support the creation of "trusted." extended attributes for whiteouts effectively required the upper filesystem to be tmpfs in most cases.) - Like VFS1, but unlike Linux, VFS2 overlay does not attempt to make mutations of the upper layer atomic using a working directory and features like RENAME_WHITEOUT. (This may change in the future, since not having a working directory makes error recovery for some operations, e.g. rmdir, particularly painful.) - Like Linux, but unlike VFS1, VFS2 represents whiteouts using character devices with rdev == 0; the equivalent of the whiteout attribute on directories is xattr trusted.overlay.opaque = "y"; and there is no equivalent to the whiteout attribute on non-directories since non-directories are never merged with lower layers. - Device and inode numbers work as follows: - In Linux, modulo the xino feature and a special case for when all layers are the same filesystem: - Directories use the overlay filesystem's device number and an ephemeral inode number assigned by the overlay. - Non-directories that have been copied up use the device and inode number assigned by the upper filesystem. - Non-directories that have not been copied up use a per-(overlay, layer)-pair device number and the inode number assigned by the lower filesystem. - In VFS1, device and inode numbers always come from the lower layer unless "whited out"; this has the adverse effect of requiring interaction with the lower filesystem even for non-directory files that exist on the upper layer. - In VFS2, device and inode numbers are assigned as in Linux, except that xino and the samefs special case are not supported. - Like Linux, but unlike VFS1, VFS2 does not attempt to maintain memory mapping coherence across copy-up. (This may have to change in the future, as users may be dependent on this property.) - Like Linux, but unlike VFS1, VFS2 uses the overlayfs mounter's credentials when interacting with the overlay's layers, rather than the caller's. - Like Linux, but unlike VFS1, VFS2 permits multiple lower layers in an overlay. - Like Linux, but unlike VFS1, VFS2's overlay filesystem is application-mountable. Updates #1199 PiperOrigin-RevId: 316019067
2020-06-08Combine executable lookup codeFabricio Voznika
Run vs. exec, VFS1 vs. VFS2 were executable lookup were slightly different from each other. Combine them all into the same logic. PiperOrigin-RevId: 315426443
2020-06-05Implement mount(2) and umount2(2) for VFS2.Rahat Mahmood
This is mostly syscall plumbing, VFS2 already implements the internals of mounts. In addition to the syscall defintions, the following mount-related mechanisms are updated: - Implement MS_NOATIME for VFS2, but only for tmpfs and goferfs. The other VFS2 filesystems don't implement node-level timestamps yet. - Implement the 'mode', 'uid' and 'gid' mount options for VFS2's tmpfs. - Plumb mount namespace ownership, which is necessary for checking appropriate capabilities during mount(2). Updates #1035 PiperOrigin-RevId: 315035352
2020-06-01More runsc changes for VFS2Fabricio Voznika
- Add /tmp handling - Apply mount options - Enable more container_test tests - Forward signals to child process when test respaws process to run as root inside namespace. Updates #1487 PiperOrigin-RevId: 314263281
2020-05-29Refactor the ResolveExecutablePath logic.Nicolas Lacasse
PiperOrigin-RevId: 313871804
2020-05-28Automated rollback of changelist 309082540Fabricio Voznika
PiperOrigin-RevId: 313636920
2020-05-13Fix runsc association of gofers and FDs on VFS2.Jamie Liu
Updates #1487 PiperOrigin-RevId: 311443628
2020-05-13Use VFS2 mount namesFabricio Voznika
Updates #1487 PiperOrigin-RevId: 311356385
2020-05-12Adjust a few log messagesFabricio Voznika
PiperOrigin-RevId: 311234146
2020-05-07Update privateunixsocket TODOs.Dean Deng
Synthetic sockets do not have the race condition issue in VFS2, and we will get rid of privateunixsocket as well. Fixes #1200. PiperOrigin-RevId: 310386474
2020-05-04Mount VSFS2 filesystem using root credentialsFabricio Voznika
PiperOrigin-RevId: 309787938
2020-05-04Add TTY support on VFS2 to runscFabricio Voznika
Updates #1623, #1487 PiperOrigin-RevId: 309777922
2020-04-24VFS2: Get HelloWorld image tests to pass with VFS2Zach Koopmans
This change includes: - Modifications to loader_test.go to get TestCreateMountNamespace to pass with VFS2. - Changes necessary to get TestHelloWorld in image tests to pass with VFS2. This means runsc can run the hello-world container with docker on VSF2. Note: Containers that use sockets will not run with these changes. See "//test/image/...". Any tests here with sockets currently fail (which is all of them but HelloWorld). PiperOrigin-RevId: 308363072
2020-04-23Add vfs.MkdirOptions.ForSyntheticMountpoint.Jamie Liu
PiperOrigin-RevId: 308143529
2020-04-17Get /bin/true to run on VFS2Zach Koopmans
Included: - loader_test.go RunTest and TestStartSignal VFS2 - container_test.go TestAppExitStatus on VFS2 - experimental flag added to runsc to turn on VFS2 Note: shared mounts are not yet supported. PiperOrigin-RevId: 307070753
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 10:54:15 +0000