summaryrefslogtreecommitdiffhomepage
path: root/runsc/boot/network.go
AgeCommit message (Collapse)Author
2021-09-15Pass address properties in a single structTony Gong
Replaced the current AddAddressWithOptions method with AddAddressWithProperties which passes all address properties in a single AddressProperties type. More properties that need to be configured in the future are expected, so adding a type makes adding them easier. PiperOrigin-RevId: 396930729
2021-09-09Remove link/packetsocketGhanan Gowripalan
This change removes NetworkDispatcher.DeliverOutboundPacket. Since all packet writes go through the NIC (the only NetworkDispatcher), we can deliver outgoing packets to interested packet endpoints before writing the packet to the link endpoint as the stack expects that all packets that get delivered to a link endpoint are transmitted on the wire. That is, link endpoints no longer need to let the stack know when it writes a packet as the stack already knows about the packet it writes through a link endpoint. PiperOrigin-RevId: 395761629
2021-09-09Add EthernetHeader only if underlying NIC has a mac address.Bhasker Hariharan
Fixes #6532 PiperOrigin-RevId: 395741741
2021-08-19Add loopback interface as an ethernet-based deviceGhanan Gowripalan
...to match Linux behaviour. We can see evidence of Linux representing loopback as an ethernet-based device below: ``` # EUI-48 based MAC addresses. $ ip link show lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 # tcpdump showing ethernet frames when sniffing loopback and logging the # link-type as EN10MB (Ethernet). $ sudo tcpdump -i lo -e -c 2 -n tcpdump: verbose output suppressed, use -v[v]... for full protocol decode listening on lo, link-type EN10MB (Ethernet), snapshot length 262144 bytes 03:09:05.002034 00:00:00:00:00:00 > 00:00:00:00:00:00, ethertype IPv4 (0x0800), length 66: 127.0.0.1.9557 > 127.0.0.1.36828: Flags [.], ack 3562800815, win 15342, options [nop,nop,TS val 843174495 ecr 843159493], length 0 03:09:05.002094 00:00:00:00:00:00 > 00:00:00:00:00:00, ethertype IPv4 (0x0800), length 66: 127.0.0.1.36828 > 127.0.0.1.9557: Flags [.], ack 1, win 6160, options [nop,nop,TS val 843174496 ecr 843159493], length 0 2 packets captured 116 packets received by filter 0 packets dropped by kernel ``` Wireshark shows a similar result as the tcpdump example above. Linux's loopback setup: https://github.com/torvalds/linux/blob/5bfc75d92efd494db37f5c4c173d3639d4772966/drivers/net/loopback.c#L162 PiperOrigin-RevId: 391836719
2021-03-06[op] Replace syscall package usage with golang.org/x/sys/unix in runsc/.Ayush Ranjan
The syscall package has been deprecated in favor of golang.org/x/sys. Note that syscall is still used in some places because the following don't seem to have an equivalent in unix package: - syscall.SysProcIDMap - syscall.Credential Updates #214 PiperOrigin-RevId: 361381490
2020-11-19Propagate IP address prefix from host to netstackFabricio Voznika
Closes #4022 PiperOrigin-RevId: 343378647
2020-11-16Remove ARP address workaroundGhanan Gowripalan
- Make AddressableEndpoint optional for NetworkEndpoint. Not all NetworkEndpoints need to support addressing (e.g. ARP), so AddressableEndpoint should only be implemented for protocols that support addressing such as IPv4 and IPv6. With this change, tcpip.ErrNotSupported will be returned by the stack when attempting to modify addresses on a network endpoint that does not support addressing. Now that packets are fully handled at the network layer, and (with this change) addresses are optional for network endpoints, we no longer need the workaround for ARP where a fake ARP address was added to each NIC that performs ARP so that packets would be delivered to the ARP layer. PiperOrigin-RevId: 342722547
2020-08-19Move boot.Config to its own packageFabricio Voznika
Updates #3494 PiperOrigin-RevId: 327548511
2020-07-22Support for receiving outbound packets in AF_PACKET.Bhasker Hariharan
Updates #173 PiperOrigin-RevId: 322665518
2020-06-16Add runsc options to set checksum offloading statusgVisor bot
--tx-checksum-offload=<true|false> enable TX checksum offload (default: false) --rx-checksum-offload=<true|false> enable RX checksum offload (default: true) Fixes #2989 PiperOrigin-RevId: 316781309
2020-04-30FIFO QDisc implementationBhasker Hariharan
Updates #231 PiperOrigin-RevId: 309323808
2020-02-20Initial network namespace support.gVisor bot
TCP/IP will work with netstack networking. hostinet doesn't work, and sockets will have the same behavior as it is now. Before the userspace is able to create device, the default loopback device can be used to test. /proc/net and /sys/net will still be connected to the root network stack; this is the same behavior now. Issue #1833 PiperOrigin-RevId: 296309389
2020-01-08Combine various Create*NIC methods into CreateNICWithOptions.Bert Muthalaly
PiperOrigin-RevId: 288779416
2020-01-08Add NIC.isLoopback()Bert Muthalaly
...enabling us to remove the "CreateNamedLoopbackNIC" variant of CreateNIC and all the plumbing to connect it through to where the value is read in FindRoute. PiperOrigin-RevId: 288713093
2019-12-11Enable IPv6 in runscBhasker Hariharan
Fixes #1341 PiperOrigin-RevId: 285108973
2019-10-22netstack/tcp: software segmentation offloadAndrei Vagin
Right now, we send each tcp packet separately, we call one system call per-packet. This patch allows to generate multiple tcp packets and send them by sendmmsg. The arguable part of this CL is a way how to handle multiple headers. This CL adds the next field to the Prepandable buffer. Nginx test results: Server Software: nginx/1.15.9 Server Hostname: 10.138.0.2 Server Port: 8080 Document Path: /10m.txt Document Length: 10485760 bytes w/o gso: Concurrency Level: 5 Time taken for tests: 5.491 seconds Complete requests: 100 Failed requests: 0 Total transferred: 1048600200 bytes HTML transferred: 1048576000 bytes Requests per second: 18.21 [#/sec] (mean) Time per request: 274.525 [ms] (mean) Time per request: 54.905 [ms] (mean, across all concurrent requests) Transfer rate: 186508.03 [Kbytes/sec] received sw-gso: Concurrency Level: 5 Time taken for tests: 3.852 seconds Complete requests: 100 Failed requests: 0 Total transferred: 1048600200 bytes HTML transferred: 1048576000 bytes Requests per second: 25.96 [#/sec] (mean) Time per request: 192.576 [ms] (mean) Time per request: 38.515 [ms] (mean, across all concurrent requests) Transfer rate: 265874.92 [Kbytes/sec] received w/o gso: $ ./tcp_benchmark --client --duration 15 --ideal [SUM] 0.0-15.1 sec 2.20 GBytes 1.25 Gbits/sec software gso: $ tcp_benchmark --client --duration 15 --ideal --gso $((1<<16)) --swgso [SUM] 0.0-15.1 sec 3.99 GBytes 2.26 Gbits/sec PiperOrigin-RevId: 276112677
2019-09-06Remove reundant global tcpip.LinkEndpointID.Ian Gudger
PiperOrigin-RevId: 267709597
2019-08-21Use tcpip.Subnet in tcpip.RouteTamir Duberstein
This is the first step in replacing some of the redundant types with the standard library equivalents. PiperOrigin-RevId: 264706552
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-06-11Use net.HardwareAddr for FDBasedLink.LinkAddressFabricio Voznika
It prints formatted to the log. PiperOrigin-RevId: 252699551
2019-06-06Add multi-fd support to fdbased endpoint.Bhasker Hariharan
This allows an fdbased endpoint to have multiple underlying fd's from which packets can be read and dispatched/written to. This should allow for higher throughput as well as better scalability of the network stack as number of connections increases. Updates #231 PiperOrigin-RevId: 251852825
2019-05-15gvisor/runsc: use a veth link address instead of generating a new oneAndrei Vagin
PiperOrigin-RevId: 248367340 Change-Id: Id792afcfff9c9d2cfd62cae21048316267b4a924
2019-04-29Change copyright notice to "The gVisor Authors"Michael Pratt
Based on the guidelines at https://opensource.google.com/docs/releasing/authors/. 1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./' 2. Manual fixup of "Google Inc" references. 3. Add AUTHORS file. Authors may request to be added to this file. 4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS. Fixes #209 PiperOrigin-RevId: 245823212 Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
2019-04-23Revert runsc to use RecvMMsg packet dispatcher.Bhasker Hariharan
PacketMMap mode has issues due to a kernel bug. This change reverts us to using recvmmsg instead of a shared ring buffer to dispatch inbound packets. This will reduce performance but should be more stable under heavy load till PacketMMap is updated to use TPacketv3. See #210 for details. Perf difference between recvmmsg vs packetmmap. RecvMMsg : iperf3 -c 172.17.0.2 Connecting to host 172.17.0.2, port 5201 [ 4] local 172.17.0.1 port 43478 connected to 172.17.0.2 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 778 MBytes 6.53 Gbits/sec 4349 188 KBytes [ 4] 1.00-2.00 sec 786 MBytes 6.59 Gbits/sec 4395 212 KBytes [ 4] 2.00-3.00 sec 756 MBytes 6.34 Gbits/sec 3655 161 KBytes [ 4] 3.00-4.00 sec 782 MBytes 6.56 Gbits/sec 4419 175 KBytes [ 4] 4.00-5.00 sec 755 MBytes 6.34 Gbits/sec 4317 187 KBytes [ 4] 5.00-6.00 sec 774 MBytes 6.49 Gbits/sec 4002 173 KBytes [ 4] 6.00-7.00 sec 737 MBytes 6.18 Gbits/sec 3904 191 KBytes [ 4] 7.00-8.00 sec 530 MBytes 4.44 Gbits/sec 3318 189 KBytes [ 4] 8.00-9.00 sec 487 MBytes 4.09 Gbits/sec 2627 188 KBytes [ 4] 9.00-10.00 sec 770 MBytes 6.46 Gbits/sec 4221 170 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 6.99 GBytes 6.00 Gbits/sec 39207 sender [ 4] 0.00-10.00 sec 6.99 GBytes 6.00 Gbits/sec receiver iperf Done. PacketMMap: bhaskerh@gvisor-bench:~/tensorflow$ iperf3 -c 172.17.0.2 Connecting to host 172.17.0.2, port 5201 [ 4] local 172.17.0.1 port 43496 connected to 172.17.0.2 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 657 MBytes 5.51 Gbits/sec 0 1.01 MBytes [ 4] 1.00-2.00 sec 1021 MBytes 8.56 Gbits/sec 0 1.01 MBytes [ 4] 2.00-3.00 sec 1.21 GBytes 10.4 Gbits/sec 45 1.01 MBytes [ 4] 3.00-4.00 sec 1018 MBytes 8.54 Gbits/sec 15 1.01 MBytes [ 4] 4.00-5.00 sec 1.28 GBytes 11.0 Gbits/sec 45 1.01 MBytes [ 4] 5.00-6.00 sec 1.38 GBytes 11.9 Gbits/sec 0 1.01 MBytes [ 4] 6.00-7.00 sec 1.34 GBytes 11.5 Gbits/sec 45 856 KBytes [ 4] 7.00-8.00 sec 1.23 GBytes 10.5 Gbits/sec 0 901 KBytes [ 4] 8.00-9.00 sec 1010 MBytes 8.48 Gbits/sec 0 923 KBytes [ 4] 9.00-10.00 sec 1.39 GBytes 11.9 Gbits/sec 0 960 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 11.4 GBytes 9.83 Gbits/sec 150 sender [ 4] 0.00-10.00 sec 11.4 GBytes 9.83 Gbits/sec receiver Updates #210 PiperOrigin-RevId: 244968438 Change-Id: Id461b5cbff2dea6fa55cfc108ea246d8f83da20b
2019-04-17Return error from fdbased.NewFabricio Voznika
RELNOTES: n/a PiperOrigin-RevId: 244031742 Change-Id: Id0cdb73194018fb5979e67b58510ead19b5a2b81
2019-04-09Add TCP checksum verification.Bhasker Hariharan
PiperOrigin-RevId: 242704699 Change-Id: I87db368ca343b3b4bf4f969b17d3aa4ce2f8bd4f
2019-03-29gvisor/runsc: enable generic segmentation offload (GSO)Andrei Vagin
The linux packet socket can handle GSO packets, so we can segment packets to 64K instead of the MTU which is usually 1500. Here are numbers for the nginx-1m test: runsc: 579330.01 [Kbytes/sec] received runsc-gso: 1794121.66 [Kbytes/sec] received runc: 2122139.06 [Kbytes/sec] received and for tcp_benchmark: $ tcp_benchmark --duration 15 --ideal [ 4] 0.0-15.0 sec 86647 MBytes 48456 Mbits/sec $ tcp_benchmark --client --duration 15 --ideal [ 4] 0.0-15.0 sec 2173 MBytes 1214 Mbits/sec $ tcp_benchmark --client --duration 15 --ideal --gso 65536 [ 4] 0.0-15.0 sec 19357 MBytes 10825 Mbits/sec PiperOrigin-RevId: 241072403 Change-Id: I20b03063a1a6649362b43609cbbc9b59be06e6d5
2019-03-12Make HandleLocal apply to all non-loopback interfaces.Ian Gudger
HandleLocal is very similar conceptually to MULTICAST_LOOP, so we can unify the implementations. This has the benefit of making HandleLocal apply even when the fdbased link endpoint isn't in use. In addition, move looping logic to route creation so that it doesn't need to be run for each packet. This should improve performance. PiperOrigin-RevId: 238099480 Change-Id: I72839f16f25310471453bc9d3fb8544815b25c23
2019-03-08Implement IP_MULTICAST_LOOP.Ian Gudger
IP_MULTICAST_LOOP controls whether or not multicast packets sent on the default route are looped back. In order to implement this switch, support for sending and looping back multicast packets on the default route had to be implemented. For now we only support IPv4 multicast. PiperOrigin-RevId: 237534603 Change-Id: I490ac7ff8e8ebef417c7eb049a919c29d156ac1c
2019-02-13Add support for using PACKET_RX_RING to receive packets.Bhasker Hariharan
PACKET_RX_RING allows the use of an mmapped buffer to receive packets from the kernel. This should cut down the number of host syscalls that need to be made to receive packets when the underlying fd is a socket of the AF_PACKET type. PiperOrigin-RevId: 233834998 Change-Id: I8060025c6ced206986e94cc46b8f382b81bfa47f
2019-01-29Use recvmmsg() instead of readv() to read packets from NIC.Bhasker Hariharan
This should reduce the number of syscalls required to process packets significantly and improve throughputs. PiperOrigin-RevId: 231366886 Change-Id: I8b38077262bf9c53176bc4a94b530188d3d7c0ca
2018-10-19Use correct company name in copyright headerIan Gudger
PiperOrigin-RevId: 217951017 Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
2018-09-28Change tcpip.Route.Mask to tcpip.AddressMask.Googler
PiperOrigin-RevId: 214975659 Change-Id: I7bd31a2c54f03ff52203109da312e4206701c44c
2018-08-08Basic support for ip link/addr and ifconfigFabricio Voznika
Closes #94 PiperOrigin-RevId: 207997580 Change-Id: I19b426f1586b5ec12f8b0cd5884d5b401d334924
2018-08-08Resend packets back to netstack if destined to itselfFabricio Voznika
Add option to redirect packet back to netstack if it's destined to itself. This fixes the problem where connecting to the local NIC address would not work, e.g.: echo bar | nc -l -p 8080 & echo foo | nc 192.168.0.2 8080 PiperOrigin-RevId: 207995083 Change-Id: I17adc2a04df48bfea711011a5df206326a1fb8ef
2018-07-11Automated rollback of changelist 203157739Bhasker Hariharan
PiperOrigin-RevId: 204196916 Change-Id: If632750fc6368acb835e22cfcee0ae55c8a04d16
2018-07-03Resend packets back to netstack if destined to itselfFabricio Voznika
Add option to redirect packet back to netstack if it's destined to itself. This fixes the problem where connecting to the local NIC address would not work, e.g.: echo bar | nc -l -p 8080 & echo foo | nc 192.168.0.2 8080 PiperOrigin-RevId: 203157739 Change-Id: I31c9f7c501e3f55007f25e1852c27893a16ac6c4
2018-04-28Check in gVisor.Googler
PiperOrigin-RevId: 194583126 Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 18:52:23 +0000