| Age | Commit message (Collapse) | Author |
|---|
|
We were previously only sending to the originator of the process group.
Integration test was changed to test this behavior. It fails without the
corresponding code change.
PiperOrigin-RevId: 216297263
Change-Id: I7e41cfd6bdd067f4b9dc215e28f555fb5088916f
|
|
PiperOrigin-RevId: 216281263
Change-Id: Ie0c189e7f5934b77c6302336723bc1181fd2866c
|
|
We were previously using the sandbox process's stdio as the root container's
stdio. This makes it difficult/impossible to distinguish output application
output from sandbox output, such as panics, which are always written to stderr.
Also close the console socket when we are done with it.
PiperOrigin-RevId: 215585180
Change-Id: I980b8c69bd61a8b8e0a496fd7bc90a06446764e0
|
|
Terminal support in runsc relies on host tty file descriptors that are imported
into the sandbox. Application tty ioctls are sent directly to the host fd.
However, those host tty ioctls are associated in the host kernel with a host
process (in this case runsc), and the host kernel intercepts job control
characters like ^C and send signals to the host process. Thus, typing ^C into a
"runsc exec" shell will send a SIGINT to the runsc process.
This change makes "runsc exec" handle all signals, and forward them into the
sandbox via the "ContainerSignal" urpc method. Since the "runsc exec" is
associated with a particular container process in the sandbox, the signal must
be associated with the same container process.
One big difficulty is that the signal should not necessarily be sent to the
sandbox process started by "exec", but instead must be sent to the foreground
process group for the tty. For example, we may exec "bash", and from bash call
"sleep 100". A ^C at this point should SIGINT sleep, not bash.
To handle this, tty files inside the sandbox must keep track of their
foreground process group, which is set/get via ioctls. When an incoming
ContainerSignal urpc comes in, we look up the foreground process group via the
tty file. Unfortunately, this means we have to expose and cache the tty file in
the Loader.
Note that "runsc exec" now handles signals properly, but "runs run" does not.
That will come in a later CL, as this one is complex enough already.
Example:
root@:/usr/local/apache2# sleep 100
^C
root@:/usr/local/apache2# sleep 100
^Z
[1]+ Stopped sleep 100
root@:/usr/local/apache2# fg
sleep 100
^C
root@:/usr/local/apache2#
PiperOrigin-RevId: 215334554
Change-Id: I53cdce39653027908510a5ba8d08c49f9cf24f39
|
|
And remove multicontainer option.
PiperOrigin-RevId: 215236981
Change-Id: I9fd1d963d987e421e63d5817f91a25c819ced6cb
|
|
PiperOrigin-RevId: 214976251
Change-Id: I631348c3886f41f63d0e77e7c4f21b3ede2ab521
|
|
It's easier to manage a single map with processes that we're interested
to track. This will make the next change to clean up the map on destroy
easier.
PiperOrigin-RevId: 214894210
Change-Id: I099247323a0487cd0767120df47ba786fac0926d
|
|
In order to implement kill --all correctly, the Sentry needs
to track all tasks that belong to a given container. This change
introduces ContainerID to the task, that gets inherited by all
children. 'kill --all' then iterates over all tasks comparing the
ContainerID field to find all processes that need to be signalled.
PiperOrigin-RevId: 214841768
Change-Id: I693b2374be8692d88cc441ef13a0ae34abf73ac6
|
|
This makes the flow slightly simpler (no need to call
Loader.SetRootContainer). And this is required change to tag
tasks with container ID inside the Sentry.
PiperOrigin-RevId: 214795210
Change-Id: I6ff4af12e73bb07157f7058bb15fd5bb88760884
|
|
PiperOrigin-RevId: 213908919
Change-Id: I74eff99a5360bb03511b946f4cb5658bb5fc40c7
|
|
The issue with the previous change was that the stdin/stdout/stderr passed to
the sentry were dup'd by host.ImportFile. This left a dangling FD that by never
closing caused containerd to timeout waiting on container stop.
PiperOrigin-RevId: 213753032
Change-Id: Ia5e4c0565c42c8610d3b59f65599a5643b0901e4
|
|
`docker run --cpuset-cpus=/--cpus=` will generate cpu resource info in config.json
(runtime spec file). When nginx worker_connections is configured as auto, the worker is
generated according to the number of CPUs. If the cgroup is already set on the host, but
it is not displayed correctly in the sandbox, performance may be degraded.
This patch can get cpus info from spec file and apply to sentry on bootup, so the
/proc/cpuinfo can show the correct cpu numbers. `lscpu` and other commands rely on
`/sys/devices/system/cpu/online` are also affected by this patch.
e.g.
--cpuset-cpus=2,3 -> cpu number:2
--cpuset-cpus=4-7 -> cpu number:4
--cpus=2.8 -> cpu number:3
--cpus=0.5 -> cpu number:1
Change-Id: Ideb22e125758d4322a12be7c51795f8018e3d316
PiperOrigin-RevId: 213685199
|
|
PiperOrigin-RevId: 213504354
Change-Id: Iadd42f0ca4b7e7a9eae780bee9900c7233fb4f3f
|
|
panic() during init() can be hard to debug.
Updates #100
PiperOrigin-RevId: 213391932
Change-Id: Ic103f1981c5b48f1e12da3b42e696e84ffac02a9
|
|
This makes `runsc wait` behave more like waitpid()/wait4() in that:
- Once a process has run to completion, you can wait on it and get its exit
code.
- Processes not waited on will consume memory (like a zombie process)
PiperOrigin-RevId: 213358916
Change-Id: I5b5eca41ce71eea68e447380df8c38361a4d1558
|
|
Stdin/out/err weren't being sent to the sentry.
PiperOrigin-RevId: 213307171
Change-Id: Ie4b634a58b1b69aa934ce8597e5cc7a47a2bcda2
|
|
This CL:
1) Fix `runsc wait`, it now also works after the container exits;
2) Generate correct container state in Load;
2) Make sure `Destory` cleanup everything before successfully return.
PiperOrigin-RevId: 212900107
Change-Id: Ie129cbb9d74f8151a18364f1fc0b2603eac4109a
|
|
We were previously openining the platform device (i.e. /dev/kvm) inside the
platfrom constructor (i.e. kvm.New). This requires that we have RW access to
the platform device when constructing the platform.
However, now that the runsc sandbox process runs as user "nobody", it is not
able to open the platform device.
This CL changes the kvm constructor to take the platform device FD, rather than
opening the device file itself. The device file is opened outside of the
sandbox and passed to the sandbox process.
PiperOrigin-RevId: 212505804
Change-Id: I427e1d9de5eb84c84f19d513356e1bb148a52910
|
|
PiperOrigin-RevId: 212028121
Change-Id: If9c2c62f3be103e2bb556b8d154c169888e34369
|
|
It was used before gofer was implemented and it's not
supported anymore.
BREAKING CHANGE: proxy-shared and proxy-exclusive options
are now: shared and exclusive.
PiperOrigin-RevId: 212017643
Change-Id: If029d4073fe60583e5ca25f98abb2953de0d78fd
|
|
PiperOrigin-RevId: 211999211
Change-Id: I5968dd1a8313d3e49bb6e6614e130107495de41d
|
|
Now, we can kill individual containers rather than the entire sandbox.
PiperOrigin-RevId: 211748106
Change-Id: Ic97e91db33d53782f838338c4a6d0aab7a313ead
|
|
Remove GetExecutablePath (the non-internal version). This makes path handling
more consistent between exec, root, and child containers.
The new getExecutablePath now uses MountNamespace.FindInode, which is more
robust than Walking the Dirent tree ourselves.
This also removes the last use of lstat(2) in the sentry, so that can be
removed from the filters.
PiperOrigin-RevId: 211683110
Change-Id: Ic8ec960fc1c267aa7d310b8efe6e900c88a9207a
|
|
This is required to increase protection when running in GKE.
PiperOrigin-RevId: 210635123
Change-Id: Iaaa8be49e73f7a3a90805313885e75894416f0b5
|
|
This is to troubleshoot problems with a hung process that is
not responding to 'runsc debug --stack' command.
PiperOrigin-RevId: 210483513
Change-Id: I4377b210b4e51bc8a281ad34fd94f3df13d9187d
|
|
Now each container gets its own dedicated gofer that is chroot'd to the
rootfs path. This is done to add an extra layer of security in case the
gofer gets compromised.
PiperOrigin-RevId: 210396476
Change-Id: Iba21360a59dfe90875d61000db103f8609157ca0
|
|
This CL adds terminal support for "docker exec". We previously only supported
consoles for the container process, but not exec processes.
The SYS_IOCTL syscall was added to the default seccomp filter list, but only
for ioctls that get/set winsize and termios structs. We need to allow these
ioctl for all containers because it's possible to run "exec -ti" on a
container that was started without an attached console, after the filters
have been installed.
Note that control-character signals are still not properly supported.
Tested with:
$ docker run --runtime=runsc -it alpine
In another terminial:
$ docker exec -it <containerid> /bin/sh
PiperOrigin-RevId: 210185456
Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
|
|
Previously, runsc improperly attempted to find an executable in the container's
PATH.
We now search the PATH via the container's fsgofer rather than the host FS,
eliminating the confusing differences between paths on the host and within a
container.
PiperOrigin-RevId: 210159488
Change-Id: I228174dbebc4c5356599036d6efaa59f28ff28d2
|
|
When multiple containers run inside a sentry, each container has its own root
filesystem and set of mounts. Containers are also added after sentry boot rather
than all configured and known at boot time.
The fsgofer needs to be able to serve the root filesystem of each container.
Thus, it must be possible to add filesystems after the fsgofer has already
started.
This change:
* Creates a URPC endpoint within the gofer process that listens for requests to
serve new content.
* Enables the sentry, when starting a new container, to add the new container's
filesystem.
* Mounts those new filesystems at separate roots within the sentry.
PiperOrigin-RevId: 208903248
Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
|
|
SACK is disabled by default and needs to be manually enabled. It not only
improves performance, but also fixes hangs downloading files from certain
websites.
PiperOrigin-RevId: 207906742
Change-Id: I4fb7277b67bfdf83ac8195f1b9c38265a0d51e8b
|
|
PiperOrigin-RevId: 207039273
Change-Id: Ib8f55a6dc302052ab4a10ccd70b07f0d73b373df
|
|
Docker expects containers to be created before they are restored.
However, gVisor restoring requires specificactions regarding the kernel
and the file system. These actions were originally in booting the sandbox.
Now setting up the file system is deferred until a call to a call to
runsc start. In the restore case, the kernel is destroyed and a new kernel
is created in the same process, as we need the same process for Docker.
These changes required careful execution of concurrent processes which
required the use of a channel.
Full docker integration still needs the ability to restore into the same
container.
PiperOrigin-RevId: 205161441
Change-Id: Ie1d2304ead7e06855319d5dc310678f701bd099f
|
|
PiperOrigin-RevId: 204522004
Change-Id: I4819dc025f0a1df03ceaaba7951b1902d44562b3
|
|
Closing the control server will block until all open requests have completed.
If a control server method panics, we end up stuck because the defer'd Destroy
function will never return.
PiperOrigin-RevId: 204354676
Change-Id: I6bb1d84b31242d7c3f20d5334b1c966bd6a61dbf
|
|
80bdf8a4068de3ac4a73b6b61a0cdcfe3e3571af accidentally moved vdso into an
inner scope, never assigning the vdso variable passed to the Kernel and
thus skipping VDSO mappings.
Fix this and remove the ability for loadVDSO to skip VDSO mappings,
since tests that do so are gone.
PiperOrigin-RevId: 203169135
Change-Id: Ifd8cadcbaf82f959223c501edcc4d83d05327eba
|
|
Updated how restoring occurs through boot.go with a separate Restore function.
This prevents a new process and new mounts from being created.
Added tests to ensure the container is restored.
Registered checkpoint and restore commands so they can be used.
Docker support for these commands is still limited.
Working on #80.
PiperOrigin-RevId: 202710950
Change-Id: I2b893ceaef6b9442b1ce3743bd112383cb92af0c
|
|
Users can now call "runsc wait <container id>" to wait on a particular process
inside the container. -pid can also be used to wait on a specific PID.
Manually tested the wait subcommand for a single waiter and multiple waiters
(simultaneously 2 processes waiting on the container and 2 processes waiting on
a PID within the container).
PiperOrigin-RevId: 202548978
Change-Id: Idd507c2cdea613c3a14879b51cfb0f7ea3fb3d4c
|
|
Closes #66
PiperOrigin-RevId: 202496258
Change-Id: Ib9287c5bf1279ffba1db21ebd9e6b59305cddf34
|
|
PiperOrigin-RevId: 202494747
Change-Id: I4d4a18e71468690b785060e580a5f83c616bd90f
|
|
PiperOrigin-RevId: 202185642
Change-Id: I2eefcc0b2ffadc6ef21d177a8a4ab0cda91f3399
|
|
PiperOrigin-RevId: 201742160
Change-Id: Ia9fa1442287c5f9e1196fb117c41536a80f6bb31
|
|
SIGUSR2 was being masked out to be used as a way to dump sentry
stacks. This could cause compatibility problems in cases anyone
uses SIGUSR2 to communicate with the container init process.
PiperOrigin-RevId: 201575374
Change-Id: I312246e828f38ad059139bb45b8addc2ed055d74
|
|
PiperOrigin-RevId: 201539050
Change-Id: I36cbf270fa5ad25de507ecb919e4005eda6aa16d
|
|
Containers are created as processes in the sandbox. Of the many things that
don't work yet, the biggest issue is that the fsgofer is launched with its root
as the sandbox's root directory. Thus, when a container is started and wants to
read anything (including the init binary of the container), the gofer tries to
serve from sandbox's root (which basically just has pause), not the container's.
PiperOrigin-RevId: 201294560
Change-Id: I6423aa8830538959c56ae908ce067e4199d627b1
|
|
A file descriptor was added as a flag to boot so a state file can restore a
container that was checkpointed.
PiperOrigin-RevId: 201068699
Change-Id: I18e96069488ffa3add468861397f3877725544aa
|
|
The right number to use is the number of processors assigned to the cgroup. But until
we make the sandbox join the respective cgroup, just use the number of processors on
the host.
Closes #65, closes #66
PiperOrigin-RevId: 200725483
Change-Id: I34a566b1a872e26c66f56fa6e3100f42aaf802b1
|
|
This is the first iteration of checkpoint that actually saves to a file.
Tests for checkpoint are included.
Ran into an issue when private unix sockets are enabled. An error message
was added for this case and the mutex state was set.
PiperOrigin-RevId: 200269470
Change-Id: I28d29a9f92c44bf73dc4a4b12ae0509ee4070e93
|
|
Functionality for checkpoint is not complete, more to come.
PiperOrigin-RevId: 199500803
Change-Id: Iafb0fcde68c584270000fea898e6657a592466f7
|
|
Container user might not have enough priviledge to walk directories and
mount filesystems. Instead, create superuser to perform these steps of
the configuration.
PiperOrigin-RevId: 197953667
Change-Id: I643650ab654e665408e2af1b8e2f2aa12d58d4fb
|
|
PiperOrigin-RevId: 197058289
Change-Id: I3946c25028b7e032be4894d61acb48ac0c24d574
|
