| Age | Commit message (Collapse) | Author |
|---|
|
destroyContainerFS must wait for all async operations to finish before
returning. In an attempt to do this, we call fs.AsyncBarrier() at the end of
the function. However, there are many defer'd DecRefs which end up running
AFTER the AsyncBarrier() call.
This CL fixes this by calling fs.AsyncBarrier() in the first defer statement,
thus ensuring that it runs at the end of the function, after all other defers.
PiperOrigin-RevId: 220523545
Change-Id: I5e96ee9ea6d86eeab788ff964484c50ef7f64a2f
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|
|
It's hard to resolve symlinks inside the sandbox because rootfs and mounts
may be read-only, forcing us to create mount points inside lower layer of an
overlay, **before** the volumes are mounted.
Since the destination must already be resolved outside the sandbox when creating
mounts, take this opportunity to rewrite the spec with paths resolved.
"runsc boot" will use the "resolved" spec to load mounts. In addition, symlink
traversals were disabled while mounting containers inside the sandbox.
It haven't been able to write a good test for it. So I'm relying on manual tests
for now.
PiperOrigin-RevId: 217749904
Change-Id: I7ac434d5befd230db1488446cda03300cc0751a9
|
|
And remove multicontainer option.
PiperOrigin-RevId: 215236981
Change-Id: I9fd1d963d987e421e63d5817f91a25c819ced6cb
|
|
PiperOrigin-RevId: 214976251
Change-Id: I631348c3886f41f63d0e77e7c4f21b3ede2ab521
|
|
This CL changes the semantics of the "--file-access" flag so that it only
affects the root filesystem. The default remains "exclusive" which is the
common use case, as neither Docker nor K8s supports sharing the root.
Keeping the root fs as "exclusive" means that the fs-intensive work done during
application startup will mostly be cacheable, and thus faster.
Non-root bind mounts will always be shared.
This CL also removes some redundant FSAccessType validations. We validate this
flag in main(), so we can assume it is valid afterwards.
PiperOrigin-RevId: 214359936
Change-Id: I7e75d7bf52dbd7fa834d0aacd4034868314f3b51
|
|
The issue with the previous change was that the stdin/stdout/stderr passed to
the sentry were dup'd by host.ImportFile. This left a dangling FD that by never
closing caused containerd to timeout waiting on container stop.
PiperOrigin-RevId: 213753032
Change-Id: Ia5e4c0565c42c8610d3b59f65599a5643b0901e4
|
|
This method will:
1. Stop the container process if it is still running.
2. Unmount all sanadbox-internal mounts for the container.
3. Delete the contaner root directory inside the sandbox.
Destroy is idempotent, and safe to call concurrantly.
This fixes a bug where after stopping a container, we cannot unmount the
container root directory on the host. This bug occured because the sandbox
dirent cache was holding a dirent with a host fd corresponding to a file inside
the container root on the host. The dirent cache did not know that the
container had exited, and kept the FD open, preventing us from unmounting on
the host.
Now that we unmount (and flush) all container mounts inside the sandbox, any
host FDs donated by the gofer will be closed, and we can unmount the container
root on the host.
PiperOrigin-RevId: 213737693
Change-Id: I28c0ff4cd19a08014cdd72fec5154497e92aacc9
|
|
Capabilities.Set() adds capabilities,
but doesn't remove existing ones that might have been loaded. Fixed
the code and added tests.
PiperOrigin-RevId: 213726369
Change-Id: Id7fa6fce53abf26c29b13b9157bb4c6616986fba
|
|
PiperOrigin-RevId: 213715511
Change-Id: I3e41b583c6138edbdeba036dfb9df4864134fc12
|
|
PiperOrigin-RevId: 213504354
Change-Id: Iadd42f0ca4b7e7a9eae780bee9900c7233fb4f3f
|
|
Stdin/out/err weren't being sent to the sentry.
PiperOrigin-RevId: 213307171
Change-Id: Ie4b634a58b1b69aa934ce8597e5cc7a47a2bcda2
|
|
We must use a context.Context with a Root Dirent that corresponds to the
container's chroot. Previously we were using the root context, which does not
have a chroot.
Getting the correct context required refactoring some of the path-lookup code.
We can't lookup the path without a context.Context, which requires
kernel.CreateProcArgs, which we only get inside control.Execute. So we have to
do the path lookup much later than we previously were.
PiperOrigin-RevId: 212064734
Change-Id: I84a5cfadacb21fd9c3ab9c393f7e308a40b9b537
|
|
It was used before gofer was implemented and it's not
supported anymore.
BREAKING CHANGE: proxy-shared and proxy-exclusive options
are now: shared and exclusive.
PiperOrigin-RevId: 212017643
Change-Id: If029d4073fe60583e5ca25f98abb2953de0d78fd
|
|
With multi-gofers, bind mounts in sub-containers should
just work. Removed restrictions and added test. There are
also a few cleanups along the way, e.g. retry unmounting
in case cleanup races with gofer teardown.
PiperOrigin-RevId: 211699569
Change-Id: Ic0a69c29d7c31cd7e038909cc686c6ac98703374
|
|
Remove GetExecutablePath (the non-internal version). This makes path handling
more consistent between exec, root, and child containers.
The new getExecutablePath now uses MountNamespace.FindInode, which is more
robust than Walking the Dirent tree ourselves.
This also removes the last use of lstat(2) in the sentry, so that can be
removed from the filters.
PiperOrigin-RevId: 211683110
Change-Id: Ic8ec960fc1c267aa7d310b8efe6e900c88a9207a
|
|
Now each container gets its own dedicated gofer that is chroot'd to the
rootfs path. This is done to add an extra layer of security in case the
gofer gets compromised.
PiperOrigin-RevId: 210396476
Change-Id: Iba21360a59dfe90875d61000db103f8609157ca0
|
|
Previously, runsc improperly attempted to find an executable in the container's
PATH.
We now search the PATH via the container's fsgofer rather than the host FS,
eliminating the confusing differences between paths on the host and within a
container.
PiperOrigin-RevId: 210159488
Change-Id: I228174dbebc4c5356599036d6efaa59f28ff28d2
|
|
When multiple containers run inside a sentry, each container has its own root
filesystem and set of mounts. Containers are also added after sentry boot rather
than all configured and known at boot time.
The fsgofer needs to be able to serve the root filesystem of each container.
Thus, it must be possible to add filesystems after the fsgofer has already
started.
This change:
* Creates a URPC endpoint within the gofer process that listens for requests to
serve new content.
* Enables the sentry, when starting a new container, to add the new container's
filesystem.
* Mounts those new filesystems at separate roots within the sentry.
PiperOrigin-RevId: 208903248
Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
|
|
Previously, gofer filesystems were configured with the default "fscache"
policy, which caches filesystem metadata and contents aggressively. While this
setting is best for performance, it means that changes from inside the sandbox
may not be immediately propagated outside the sandbox, and vice-versa.
This CL changes volumes and the root fs configuration to use a new
"remote-revalidate" cache policy which tries to retain as much caching as
possible while still making fs changes visible across the sandbox boundary.
This cache policy is enabled by default for the root filesystem. The default
value for the "--file-access" flag is still "proxy", but the behavior is
changed to use the new cache policy.
A new value for the "--file-access" flag is added, called "proxy-exclusive",
which turns on the previous aggressive caching behavior. As the name implies,
this flag should be used when the sandbox has "exclusive" access to the
filesystem.
All volume mounts are configured to use the new cache policy, since it is
safest and most likely to be correct. There is not currently a way to change
this behavior, but it's possible to add such a mechanism in the future. The
configurability is a smaller issue for volumes, since most of the expensive
application fs operations (walking + stating files) will likely served by the
root fs.
PiperOrigin-RevId: 208735037
Change-Id: Ife048fab1948205f6665df8563434dbc6ca8cfc9
|
|
Docker expects containers to be created before they are restored.
However, gVisor restoring requires specificactions regarding the kernel
and the file system. These actions were originally in booting the sandbox.
Now setting up the file system is deferred until a call to a call to
runsc start. In the restore case, the kernel is destroyed and a new kernel
is created in the same process, as we need the same process for Docker.
These changes required careful execution of concurrent processes which
required the use of a channel.
Full docker integration still needs the ability to restore into the same
container.
PiperOrigin-RevId: 205161441
Change-Id: Ie1d2304ead7e06855319d5dc310678f701bd099f
|
|
PiperOrigin-RevId: 203161098
Change-Id: Ia1904420cb3ee830899d24a4fe418bba6533be64
|
|
The /proc and /sys mounts are "mandatory" in the sense that they should be
mounted in the sandbox even when they are not included in the spec. Runsc
treats /tmp similarly, because it is faster to use the internal tmpfs
implementation instead of proxying to the host.
However, the spec may contain submounts of these mandatory mounts (particularly
for /tmp). In those cases, we must mount our mandatory mounts before the
submount, otherwise the submount will be masked.
Since the mandatory mounts are all top-level directories, we can mount them
right after the root.
PiperOrigin-RevId: 203145635
Change-Id: Id69bae771d32c1a5b67e08c8131b73d9b42b2fbf
|
|
Updated how restoring occurs through boot.go with a separate Restore function.
This prevents a new process and new mounts from being created.
Added tests to ensure the container is restored.
Registered checkpoint and restore commands so they can be used.
Docker support for these commands is still limited.
Working on #80.
PiperOrigin-RevId: 202710950
Change-Id: I2b893ceaef6b9442b1ce3743bd112383cb92af0c
|
|
PiperOrigin-RevId: 201978212
Change-Id: Ie3df1fd41d5293fff66b546a0c68c3bf98126067
|
|
Before a container can be restored, the mounts must be configured.
The root and submounts and their key information is compiled into a
RestoreEnvironment.
Future code will be added to set this created environment before
restoring a container.
Tests to ensure the correct environment were added.
PiperOrigin-RevId: 201544637
Change-Id: Ia894a8b0f80f31104d1c732e113b1d65a4697087
|
|
PiperOrigin-RevId: 201018483
Change-Id: I52fe3d01c83c8a2f0e9275d9d88c37e46fa224a2
|
|
PiperOrigin-RevId: 200768923
Change-Id: I4b8da10bcac296e8171fe6754abec5aabfec5e65
|
|
Boot loader tries to stat mount to determine whether it's a file or not. This
may file if the sandbox process doesn't have access to the file. Instead, add
overlay on top of file, which is better anyway since we don't want to propagate
changes to the host.
PiperOrigin-RevId: 200411261
Change-Id: I14222410e8bc00ed037b779a1883d503843ffebb
|
|
PiperOrigin-RevId: 200274828
Change-Id: I956703217df08d8650a881479b7ade8f9f119912
|
|
runsc now mounts the devpts filesystem, so you get a real terminal using
ssh+sshd.
PiperOrigin-RevId: 200244830
Change-Id: If577c805ad0138fda13103210fa47178d8ac6605
|
|
PiperOrigin-RevId: 199175296
Change-Id: I694ad1cfa65572c92f77f22421fdcac818f44630
|
|
Container user might not have enough priviledge to walk directories and
mount filesystems. Instead, create superuser to perform these steps of
the configuration.
PiperOrigin-RevId: 197953667
Change-Id: I643650ab654e665408e2af1b8e2f2aa12d58d4fb
|
|
When file is backed by host FD, atime and mtime for the host file and the
cached attributes in the Sentry must be close together. In this case,
the call to update atime and mtime can be skipped. This is important when
host filesystem is using overlay because updating atime and mtime explicitly
forces a copy up for every file that is touched.
PiperOrigin-RevId: 196176413
Change-Id: I3933ea91637a071ba2ea9db9d8ac7cdba5dc0482
|
|
PiperOrigin-RevId: 194583126
Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
|
