Age | Commit message (Collapse) | Author |
|
According to the OCI spec Mount.Type is an optional field and it
defaults to "bind" when any of "bind" or "rbind" is included in
Mount.Options.
Also fix the shim to remove bind/rbind from options when mount is
converted from bind to tmpfs inside the Sentry.
Fixes #2330
Fixes #3274
PiperOrigin-RevId: 371996891
|
|
A skeleton implementation of cgroupfs. It supports trivial cpu and
memory controllers with no support for hierarchies.
PiperOrigin-RevId: 366561126
|
|
containerd usually configures both /dev and /dev/shm as tmpfs mounts, e.g.:
```
"mounts": [
...
{
"destination": "/dev",
"type": "tmpfs",
"source": "/run/containerd/io.containerd.runtime.v2.task/moby/10eedbd6a0e7937ddfcab90f2c25bd9a9968b734c4ae361318142165d445e67e/tmpfs",
"options": [
"nosuid",
"strictatime",
"mode=755",
"size=65536k"
]
},
...
{
"destination": "/dev/shm",
"type": "tmpfs",
"source": "/run/containerd/io.containerd.runtime.v2.task/moby/10eedbd6a0e7937ddfcab90f2c25bd9a9968b734c4ae361318142165d445e67e/shm",
"options": [
"nosuid",
"noexec",
"nodev",
"mode=1777",
"size=67108864"
]
},
...
```
(This is mostly consistent with how Linux is usually configured, except that
/dev is conventionally devtmpfs, not regular tmpfs. runc/libcontainer
implements OCI-runtime-spec-undocumented behavior to create
/dev/{ptmx,fd,stdin,stdout,stderr} in non-bind /dev mounts. runsc silently
switches /dev to devtmpfs. In VFS1, this is necessary to get device files like
/dev/null at all, since VFS1 doesn't support real device special files, only
what is hardcoded in devfs. VFS2 does support device special files, but using
devtmpfs is the easiest way to get pre-created files in /dev.)
runsc ignores many /dev submounts in the spec, including /dev/shm. In VFS1,
this appears to be to avoid introducing a submount overlay for /dev, and is
mostly fine since the typical mode for the /dev/shm mount is ~consistent with
the mode of the /dev/shm directory provided by devfs (modulo the sticky bit).
In VFS2, this is vestigial (VFS2 does not use submount overlays), and devtmpfs'
/dev/shm mode is correct for the mount point but not the mount. So turn off
this behavior for VFS2.
After this change:
```
$ docker run --rm -it ubuntu:focal ls -lah /dev/shm
total 0
drwxrwxrwt 2 root root 40 Mar 18 00:16 .
drwxr-xr-x 5 root root 360 Mar 18 00:16 ..
$ docker run --runtime=runsc --rm -it ubuntu:focal ls -lah /dev/shm
total 0
drwxrwxrwx 1 root root 0 Mar 18 00:16 .
dr-xr-xr-x 1 root root 0 Mar 18 00:16 ..
$ docker run --runtime=runsc-vfs2 --rm -it ubuntu:focal ls -lah /dev/shm
total 0
drwxrwxrwt 2 root root 40 Mar 18 00:16 .
drwxr-xr-x 5 root root 320 Mar 18 00:16 ..
```
Fixes #5687
PiperOrigin-RevId: 363699385
|
|
The syscall package has been deprecated in favor of golang.org/x/sys.
Note that syscall is still used in some places because the following don't seem
to have an equivalent in unix package:
- syscall.SysProcIDMap
- syscall.Credential
Updates #214
PiperOrigin-RevId: 361381490
|
|
Previously, loader.signalProcess was inconsitently using both root and
container's PID namespace to find the process. It used root namespace
for the exec'd process and container's PID namespace for other processes.
This fixes the code to use the root PID namespace across the board, which
is the same PID reported in `runsc ps` (or soon will after
https://github.com/google/gvisor/pull/5519).
PiperOrigin-RevId: 358836297
|
|
This includes minor fix-ups:
* Handle SIGTERM in runsc debug, to exit gracefully.
* Fix cmd.debug.go opening all profiles as RDONLY.
* Fix the test name in fio_test.go, and encode the block size in the test.
PiperOrigin-RevId: 350205718
|
|
This allows for a model of profiling when you can start collection, and
it will terminate when the sandbox terminates. Without this synchronous
call, it is effectively impossible to collect length blocking and mutex
profiles.
PiperOrigin-RevId: 349483418
|
|
Fixes #2714
PiperOrigin-RevId: 342950412
|
|
When OOM score adjustment needs to be set, all the containers need to be
loaded to find all containers that belong to the sandbox. However, each
load signals the container to ensure it is still alive. OOM score
adjustment is set during creation and deletion of every container, generating
a flood of signals to all containers. The fix removes the signal check
when it's not needed.
There is also a race fetching OOM score adjustment value from the parent when
the sandbox exits at the same time (the time it took to signal containers above
made this window quite large). The fix is to store the original value
in the sandbox state file and use it when the value needs to be restored.
Also add more logging and made the existing ones more consistent to help with
debugging.
PiperOrigin-RevId: 340940799
|
|
Inode number consistency checks are now skipped in save/restore tests for
reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename.
They pass in VFS1 due to the bug described in new test case
SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs.
Fixes #1663
PiperOrigin-RevId: 338776148
|
|
VFS1 and VFS2 host FDs have different dupping behavior,
making error prone to code for both. Change the contract
so that FDs are released as they are used, so the caller
can simple defer a block that closes all remaining files.
This also addresses handling of partial failures.
With this fix, more VFS2 tests can be enabled.
Updates #1487
PiperOrigin-RevId: 330112266
|
|
Updates #3494
PiperOrigin-RevId: 327548511
|
|
Also removes `--profile-goroutine` because it's equivalent
to `debug --stacks`.
PiperOrigin-RevId: 325061502
|
|
- Combine process creation code that is shared between
root and subcontainer processes
- Move root container information into a struct for
clarity
Updates #2714
PiperOrigin-RevId: 321204798
|
|
|
|
TCP/IP will work with netstack networking. hostinet doesn't work, and sockets
will have the same behavior as it is now.
Before the userspace is able to create device, the default loopback device can
be used to test.
/proc/net and /sys/net will still be connected to the root network stack; this
is the same behavior now.
Issue #1833
PiperOrigin-RevId: 296309389
|
|
This adds meaningful annotations to the trace generated by the runtime/trace
package.
PiperOrigin-RevId: 284290115
|
|
The watchdog currently can find stuck tasks, but has no way to tell if the
sandbox is stuck before the application starts executing.
This CL adds a startup timeout and action to the watchdog. If Start() is not
called before the given timeout (if non-zero), then the watchdog will take the
action.
PiperOrigin-RevId: 277970577
|
|
fix a typo
|
|
remove a duplicated period
|
|
Linux kernel before 4.19 doesn't implement a feature that updates
open FD after a file is open for write (and is copied to the upper
layer). Already open FD will continue to read the old file content
until they are reopened. This is especially problematic for gVisor
because it caches open files.
Flag was added to force readonly files to be reopenned when the
same file is open for write. This is only needed if using kernels
prior to 4.19.
Closes #1006
It's difficult to really test this because we never run on tests
on older kernels. I'm adding a test in GKE which uses kernels
with the overlayfs problem for 1.14 and lower.
PiperOrigin-RevId: 275115289
|
|
PiperOrigin-RevId: 273630282
|
|
PiperOrigin-RevId: 273365058
|
|
Endpoint protocol goroutines were previously started as part of
loading the endpoint. This is potentially too soon, as resources used
by these goroutine may not have been loaded. Protocol goroutines may
perform meaningful work as soon as they're started (ex: incoming
connect) which can cause them to indirectly access resources that
haven't been loaded yet.
This CL defers resuming all protocol goroutines until the end of
restore.
PiperOrigin-RevId: 262409429
|
|
Each gofer now has a goroutine that polls on the FDs used
to communicate with the sandbox. The respective gofer is
destroyed if any of the FDs is closed.
Closes #601
PiperOrigin-RevId: 261383725
|
|
We can get the mount namespace from the CreateProcessArgs in all cases where we
need it. This also gets rid of kernel.Destroy method, since the only thing it
was doing was DecRefing the mounts.
Removing the need to call kernel.SetRootMountNamespace also allowed for some
more simplifications in the container fs setup code.
PiperOrigin-RevId: 261357060
|
|
New options are:
runsc debug --strace=off|all|function1,function2
runsc debug --log-level=warning|info|debug
runsc debug --log-packets=true|false
Updates #407
PiperOrigin-RevId: 254843128
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
PiperOrigin-RevId: 252869983
|
|
Parse annotations containing 'gvisor.dev/spec/mount' that gives
hints about how mounts are shared between containers inside a
pod. This information can be used to better inform how to mount
these volumes inside gVisor. For example, a volume that is shared
between containers inside a pod can be bind mounted inside the
sandbox, instead of being two independent mounts.
For now, this information is used to allow the same tmpfs mounts
to be shared between containers which wasn't possible before.
PiperOrigin-RevId: 252704037
|
|
No change in functionaly. Added containerMounter object
to keep state while the mounts are processed. This will
help upcoming changes to share mounts per-pod.
PiperOrigin-RevId: 251350096
|
|
clearStatus was added to allow detached execution to wait
on the exec'd process and retrieve its exit status. However,
it's not currently used. Both docker and gvisor-containerd-shim
wait on the "shim" process and retrieve the exit status from
there. We could change gvisor-containerd-shim to use waits, but
it will end up also consuming a process for the wait, which is
similar to having the shim process.
Closes #234
PiperOrigin-RevId: 251349490
|
|
Updates #220
PiperOrigin-RevId: 250532302
|
|
urpc always closes all files once the RPC function returns.
PiperOrigin-RevId: 248406857
Change-Id: I400a8562452ec75c8e4bddc2154948567d572950
|
|
Change-Id: I02b30de13f1393df66edf8829fedbf32405d18f8
PiperOrigin-RevId: 246621192
|
|
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes #209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
|
|
PiperOrigin-RevId: 245818639
Change-Id: I03703ef0fb9b6675955637b9fe2776204c545789
|
|
PiperOrigin-RevId: 241637164
Change-Id: I65476a739cf38f1818dc47f6ce60638dec8b77a8
|
|
PiperOrigin-RevId: 241567897
Change-Id: I580eac04f52bb15f4aab7df9822c4aa92e743021
|
|
This is in preparation for improved page cache reclaim, which requires
greater integration between the page cache and page allocator.
PiperOrigin-RevId: 238444706
Change-Id: Id24141b3678d96c7d7dc24baddd9be555bffafe4
|
|
Example:
runsc debug --root=<dir> \
--profile-heap=/tmp/heap.prof \
--profile-cpu=/tmp/cpu.prod --profile-delay=30 \
<container ID>
PiperOrigin-RevId: 237848456
Change-Id: Icff3f20c1b157a84d0922599eaea327320dad773
|
|
PiperOrigin-RevId: 231504064
Change-Id: I585b769aef04a3ad7e7936027958910a6eed9c8d
|
|
Removed "error" and "failed to" prefix that don't add value
from messages. Adjusted a few other messages. In particular,
when the container fail to start, the message returned is easier
for humans to read:
$ docker run --rm --runtime=runsc alpine foobar
docker: Error response from daemon: OCI runtime start failed: <path> did not terminate sucessfully: starting container: starting root container [foobar]: starting sandbox: searching for executable "foobar", cwd: "/", $PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin": no such file or directory
Closes #77
PiperOrigin-RevId: 230022798
Change-Id: I83339017c70dae09e4f9f8e0ea2e554c4d5d5cd1
|
|
Make 'runsc create' join cgroup before creating sandbox process.
This removes the need to synchronize platform creation and ensure
that sandbox process is charged to the right cgroup from the start.
PiperOrigin-RevId: 227166451
Change-Id: Ieb4b18e6ca0daf7b331dc897699ca419bc5ee3a2
|
|
PiperOrigin-RevId: 224600982
Change-Id: I547253528e24fb0bb318fc9d2632cb80504acb34
|
|
PiperOrigin-RevId: 220869535
Change-Id: I9917e5daf02499f7aab6e2aa4051c54ff4461b9a
|
|
PiperOrigin-RevId: 220519632
Change-Id: Iaeec007fc1aa3f0b72569b288826d45f2534c4bf
|
|
Before this change, a container starting up could race with
destroy (aka delete) and leave processes behind.
Now, whenever a container is created, Loader.processes gets
a new entry. Start now expects the entry to be there, and if
it's not it means that the container was deleted.
I've also fixed Loader.waitPID to search for the process using
the init process's PID namespace.
We could use a few more tests for signal and wait. I'll send
them in another cl.
PiperOrigin-RevId: 220224290
Change-Id: I15146079f69904dc07d43c3b66cc343a2dab4cc4
|
|
PiperOrigin-RevId: 220204591
Change-Id: I21a9c6f5c12a376d18da5d10c1871837c4f49ad2
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|