| Age | Commit message (Collapse) | Author |
|---|
|
Updates #3494
PiperOrigin-RevId: 327548511
|
|
Also removes `--profile-goroutine` because it's equivalent
to `debug --stacks`.
PiperOrigin-RevId: 325061502
|
|
- Combine process creation code that is shared between
root and subcontainer processes
- Move root container information into a struct for
clarity
Updates #2714
PiperOrigin-RevId: 321204798
|
|
|
|
TCP/IP will work with netstack networking. hostinet doesn't work, and sockets
will have the same behavior as it is now.
Before the userspace is able to create device, the default loopback device can
be used to test.
/proc/net and /sys/net will still be connected to the root network stack; this
is the same behavior now.
Issue #1833
PiperOrigin-RevId: 296309389
|
|
This adds meaningful annotations to the trace generated by the runtime/trace
package.
PiperOrigin-RevId: 284290115
|
|
The watchdog currently can find stuck tasks, but has no way to tell if the
sandbox is stuck before the application starts executing.
This CL adds a startup timeout and action to the watchdog. If Start() is not
called before the given timeout (if non-zero), then the watchdog will take the
action.
PiperOrigin-RevId: 277970577
|
|
fix a typo
|
|
remove a duplicated period
|
|
Linux kernel before 4.19 doesn't implement a feature that updates
open FD after a file is open for write (and is copied to the upper
layer). Already open FD will continue to read the old file content
until they are reopened. This is especially problematic for gVisor
because it caches open files.
Flag was added to force readonly files to be reopenned when the
same file is open for write. This is only needed if using kernels
prior to 4.19.
Closes #1006
It's difficult to really test this because we never run on tests
on older kernels. I'm adding a test in GKE which uses kernels
with the overlayfs problem for 1.14 and lower.
PiperOrigin-RevId: 275115289
|
|
PiperOrigin-RevId: 273630282
|
|
PiperOrigin-RevId: 273365058
|
|
Endpoint protocol goroutines were previously started as part of
loading the endpoint. This is potentially too soon, as resources used
by these goroutine may not have been loaded. Protocol goroutines may
perform meaningful work as soon as they're started (ex: incoming
connect) which can cause them to indirectly access resources that
haven't been loaded yet.
This CL defers resuming all protocol goroutines until the end of
restore.
PiperOrigin-RevId: 262409429
|
|
Each gofer now has a goroutine that polls on the FDs used
to communicate with the sandbox. The respective gofer is
destroyed if any of the FDs is closed.
Closes #601
PiperOrigin-RevId: 261383725
|
|
We can get the mount namespace from the CreateProcessArgs in all cases where we
need it. This also gets rid of kernel.Destroy method, since the only thing it
was doing was DecRefing the mounts.
Removing the need to call kernel.SetRootMountNamespace also allowed for some
more simplifications in the container fs setup code.
PiperOrigin-RevId: 261357060
|
|
New options are:
runsc debug --strace=off|all|function1,function2
runsc debug --log-level=warning|info|debug
runsc debug --log-packets=true|false
Updates #407
PiperOrigin-RevId: 254843128
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
PiperOrigin-RevId: 252869983
|
|
Parse annotations containing 'gvisor.dev/spec/mount' that gives
hints about how mounts are shared between containers inside a
pod. This information can be used to better inform how to mount
these volumes inside gVisor. For example, a volume that is shared
between containers inside a pod can be bind mounted inside the
sandbox, instead of being two independent mounts.
For now, this information is used to allow the same tmpfs mounts
to be shared between containers which wasn't possible before.
PiperOrigin-RevId: 252704037
|
|
No change in functionaly. Added containerMounter object
to keep state while the mounts are processed. This will
help upcoming changes to share mounts per-pod.
PiperOrigin-RevId: 251350096
|
|
clearStatus was added to allow detached execution to wait
on the exec'd process and retrieve its exit status. However,
it's not currently used. Both docker and gvisor-containerd-shim
wait on the "shim" process and retrieve the exit status from
there. We could change gvisor-containerd-shim to use waits, but
it will end up also consuming a process for the wait, which is
similar to having the shim process.
Closes #234
PiperOrigin-RevId: 251349490
|
|
Updates #220
PiperOrigin-RevId: 250532302
|
|
urpc always closes all files once the RPC function returns.
PiperOrigin-RevId: 248406857
Change-Id: I400a8562452ec75c8e4bddc2154948567d572950
|
|
Change-Id: I02b30de13f1393df66edf8829fedbf32405d18f8
PiperOrigin-RevId: 246621192
|
|
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes #209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
|
|
PiperOrigin-RevId: 245818639
Change-Id: I03703ef0fb9b6675955637b9fe2776204c545789
|
|
PiperOrigin-RevId: 241637164
Change-Id: I65476a739cf38f1818dc47f6ce60638dec8b77a8
|
|
PiperOrigin-RevId: 241567897
Change-Id: I580eac04f52bb15f4aab7df9822c4aa92e743021
|
|
This is in preparation for improved page cache reclaim, which requires
greater integration between the page cache and page allocator.
PiperOrigin-RevId: 238444706
Change-Id: Id24141b3678d96c7d7dc24baddd9be555bffafe4
|
|
Example:
runsc debug --root=<dir> \
--profile-heap=/tmp/heap.prof \
--profile-cpu=/tmp/cpu.prod --profile-delay=30 \
<container ID>
PiperOrigin-RevId: 237848456
Change-Id: Icff3f20c1b157a84d0922599eaea327320dad773
|
|
PiperOrigin-RevId: 231504064
Change-Id: I585b769aef04a3ad7e7936027958910a6eed9c8d
|
|
Removed "error" and "failed to" prefix that don't add value
from messages. Adjusted a few other messages. In particular,
when the container fail to start, the message returned is easier
for humans to read:
$ docker run --rm --runtime=runsc alpine foobar
docker: Error response from daemon: OCI runtime start failed: <path> did not terminate sucessfully: starting container: starting root container [foobar]: starting sandbox: searching for executable "foobar", cwd: "/", $PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin": no such file or directory
Closes #77
PiperOrigin-RevId: 230022798
Change-Id: I83339017c70dae09e4f9f8e0ea2e554c4d5d5cd1
|
|
Make 'runsc create' join cgroup before creating sandbox process.
This removes the need to synchronize platform creation and ensure
that sandbox process is charged to the right cgroup from the start.
PiperOrigin-RevId: 227166451
Change-Id: Ieb4b18e6ca0daf7b331dc897699ca419bc5ee3a2
|
|
PiperOrigin-RevId: 224600982
Change-Id: I547253528e24fb0bb318fc9d2632cb80504acb34
|
|
PiperOrigin-RevId: 220869535
Change-Id: I9917e5daf02499f7aab6e2aa4051c54ff4461b9a
|
|
PiperOrigin-RevId: 220519632
Change-Id: Iaeec007fc1aa3f0b72569b288826d45f2534c4bf
|
|
Before this change, a container starting up could race with
destroy (aka delete) and leave processes behind.
Now, whenever a container is created, Loader.processes gets
a new entry. Start now expects the entry to be there, and if
it's not it means that the container was deleted.
I've also fixed Loader.waitPID to search for the process using
the init process's PID namespace.
We could use a few more tests for signal and wait. I'll send
them in another cl.
PiperOrigin-RevId: 220224290
Change-Id: I15146079f69904dc07d43c3b66cc343a2dab4cc4
|
|
PiperOrigin-RevId: 220204591
Change-Id: I21a9c6f5c12a376d18da5d10c1871837c4f49ad2
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|
|
Now containers run with "docker run -it" support control characters like ^C and
^Z.
This required refactoring our signal handling a bit. Signals delivered to the
"runsc boot" process are turned into loader.Signal calls with the appropriate
delivery mode. Previously they were always sent directly to PID 1.
PiperOrigin-RevId: 217566770
Change-Id: I5b7220d9a0f2b591a56335479454a200c6de8732
|
|
Terminal support in runsc relies on host tty file descriptors that are imported
into the sandbox. Application tty ioctls are sent directly to the host fd.
However, those host tty ioctls are associated in the host kernel with a host
process (in this case runsc), and the host kernel intercepts job control
characters like ^C and send signals to the host process. Thus, typing ^C into a
"runsc exec" shell will send a SIGINT to the runsc process.
This change makes "runsc exec" handle all signals, and forward them into the
sandbox via the "ContainerSignal" urpc method. Since the "runsc exec" is
associated with a particular container process in the sandbox, the signal must
be associated with the same container process.
One big difficulty is that the signal should not necessarily be sent to the
sandbox process started by "exec", but instead must be sent to the foreground
process group for the tty. For example, we may exec "bash", and from bash call
"sleep 100". A ^C at this point should SIGINT sleep, not bash.
To handle this, tty files inside the sandbox must keep track of their
foreground process group, which is set/get via ioctls. When an incoming
ContainerSignal urpc comes in, we look up the foreground process group via the
tty file. Unfortunately, this means we have to expose and cache the tty file in
the Loader.
Note that "runsc exec" now handles signals properly, but "runs run" does not.
That will come in a later CL, as this one is complex enough already.
Example:
root@:/usr/local/apache2# sleep 100
^C
root@:/usr/local/apache2# sleep 100
^Z
[1]+ Stopped sleep 100
root@:/usr/local/apache2# fg
sleep 100
^C
root@:/usr/local/apache2#
PiperOrigin-RevId: 215334554
Change-Id: I53cdce39653027908510a5ba8d08c49f9cf24f39
|
|
PiperOrigin-RevId: 214976251
Change-Id: I631348c3886f41f63d0e77e7c4f21b3ede2ab521
|
|
It's easier to manage a single map with processes that we're interested
to track. This will make the next change to clean up the map on destroy
easier.
PiperOrigin-RevId: 214894210
Change-Id: I099247323a0487cd0767120df47ba786fac0926d
|
|
In order to implement kill --all correctly, the Sentry needs
to track all tasks that belong to a given container. This change
introduces ContainerID to the task, that gets inherited by all
children. 'kill --all' then iterates over all tasks comparing the
ContainerID field to find all processes that need to be signalled.
PiperOrigin-RevId: 214841768
Change-Id: I693b2374be8692d88cc441ef13a0ae34abf73ac6
|
|
This makes the flow slightly simpler (no need to call
Loader.SetRootContainer). And this is required change to tag
tasks with container ID inside the Sentry.
PiperOrigin-RevId: 214795210
Change-Id: I6ff4af12e73bb07157f7058bb15fd5bb88760884
|
|
Destroy flushes dirent references, which triggers many async close operations.
We must wait for those to finish before returning from Destroy, otherwise we
may kill the gofer, causing a cascade of failing RPCs and leading to an
inconsistent FS state.
PiperOrigin-RevId: 213884637
Change-Id: Id054b47fc0f97adc5e596d747c08d3b97a1d1f71
|
|
The issue with the previous change was that the stdin/stdout/stderr passed to
the sentry were dup'd by host.ImportFile. This left a dangling FD that by never
closing caused containerd to timeout waiting on container stop.
PiperOrigin-RevId: 213753032
Change-Id: Ia5e4c0565c42c8610d3b59f65599a5643b0901e4
|
|
This method will:
1. Stop the container process if it is still running.
2. Unmount all sanadbox-internal mounts for the container.
3. Delete the contaner root directory inside the sandbox.
Destroy is idempotent, and safe to call concurrantly.
This fixes a bug where after stopping a container, we cannot unmount the
container root directory on the host. This bug occured because the sandbox
dirent cache was holding a dirent with a host fd corresponding to a file inside
the container root on the host. The dirent cache did not know that the
container had exited, and kept the FD open, preventing us from unmounting on
the host.
Now that we unmount (and flush) all container mounts inside the sandbox, any
host FDs donated by the gofer will be closed, and we can unmount the container
root on the host.
PiperOrigin-RevId: 213737693
Change-Id: I28c0ff4cd19a08014cdd72fec5154497e92aacc9
|
|
PiperOrigin-RevId: 213504354
Change-Id: Iadd42f0ca4b7e7a9eae780bee9900c7233fb4f3f
|
|
This makes `runsc wait` behave more like waitpid()/wait4() in that:
- Once a process has run to completion, you can wait on it and get its exit
code.
- Processes not waited on will consume memory (like a zombie process)
PiperOrigin-RevId: 213358916
Change-Id: I5b5eca41ce71eea68e447380df8c38361a4d1558
|
