summaryrefslogtreecommitdiffhomepage
path: root/runsc/boot/controller.go
AgeCommit message (Collapse)Author
2019-10-08Remove stale TODOFabricio Voznika
PiperOrigin-RevId: 273630282
2019-10-07Rename epsocket to netstack.Kevin Krakauer
PiperOrigin-RevId: 273365058
2019-08-08netstack: Don't start endpoint goroutines too soon on restore.Rahat Mahmood
Endpoint protocol goroutines were previously started as part of loading the endpoint. This is potentially too soon, as resources used by these goroutine may not have been loaded. Protocol goroutines may perform meaningful work as soon as they're started (ex: incoming connect) which can cause them to indirectly access resources that haven't been loaded yet. This CL defers resuming all protocol goroutines until the end of restore. PiperOrigin-RevId: 262409429
2019-08-02Stops container if gofer is killedFabricio Voznika
Each gofer now has a goroutine that polls on the FDs used to communicate with the sandbox. The respective gofer is destroyed if any of the FDs is closed. Closes #601 PiperOrigin-RevId: 261383725
2019-08-02Remove kernel.mounts.Nicolas Lacasse
We can get the mount namespace from the CreateProcessArgs in all cases where we need it. This also gets rid of kernel.Destroy method, since the only thing it was doing was DecRefing the mounts. Removing the need to call kernel.SetRootMountNamespace also allowed for some more simplifications in the container fs setup code. PiperOrigin-RevId: 261357060
2019-06-24Allow to change logging options using 'runsc debug'Fabricio Voznika
New options are: runsc debug --strace=off|all|function1,function2 runsc debug --log-level=warning|info|debug runsc debug --log-packets=true|false Updates #407 PiperOrigin-RevId: 254843128
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-06-12gvisor/runsc: apply seccomp filters before parsing a state fileAndrei Vagin
PiperOrigin-RevId: 252869983
2019-06-11Add support to mount pod shared tmpfs mountsFabricio Voznika
Parse annotations containing 'gvisor.dev/spec/mount' that gives hints about how mounts are shared between containers inside a pod. This information can be used to better inform how to mount these volumes inside gVisor. For example, a volume that is shared between containers inside a pod can be bind mounted inside the sandbox, instead of being two independent mounts. For now, this information is used to allow the same tmpfs mounts to be shared between containers which wasn't possible before. PiperOrigin-RevId: 252704037
2019-06-03Refactor container FS setupFabricio Voznika
No change in functionaly. Added containerMounter object to keep state while the mounts are processed. This will help upcoming changes to share mounts per-pod. PiperOrigin-RevId: 251350096
2019-06-03Remove 'clearStatus' option from container.Wait*PID()Fabricio Voznika
clearStatus was added to allow detached execution to wait on the exec'd process and retrieve its exit status. However, it's not currently used. Both docker and gvisor-containerd-shim wait on the "shim" process and retrieve the exit status from there. We could change gvisor-containerd-shim to use waits, but it will end up also consuming a process for the wait, which is similar to having the shim process. Closes #234 PiperOrigin-RevId: 251349490
2019-05-30Add support for collecting execution trace to runsc.Bhasker Hariharan
Updates #220 PiperOrigin-RevId: 250532302
2019-05-15Cleanup around urpc file payload handlingFabricio Voznika
urpc always closes all files once the RPC function returns. PiperOrigin-RevId: 248406857 Change-Id: I400a8562452ec75c8e4bddc2154948567d572950
2019-05-03Fix runsc restore to be compatible with docker start --checkpoint ...Andrei Vagin
Change-Id: I02b30de13f1393df66edf8829fedbf32405d18f8 PiperOrigin-RevId: 246621192
2019-04-29Change copyright notice to "The gVisor Authors"Michael Pratt
Based on the guidelines at https://opensource.google.com/docs/releasing/authors/. 1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./' 2. Manual fixup of "Google Inc" references. 3. Add AUTHORS file. Authors may request to be added to this file. 4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS. Fixes #209 PiperOrigin-RevId: 245823212 Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
2019-04-29Allow and document bug ids in gVisor codebase.Nicolas Lacasse
PiperOrigin-RevId: 245818639 Change-Id: I03703ef0fb9b6675955637b9fe2776204c545789
2019-04-02Remove obsolete TODO.Kevin Krakauer
PiperOrigin-RevId: 241637164 Change-Id: I65476a739cf38f1818dc47f6ce60638dec8b77a8
2019-04-02Change bug number for duplicate bug.Kevin Krakauer
PiperOrigin-RevId: 241567897 Change-Id: I580eac04f52bb15f4aab7df9822c4aa92e743021
2019-03-14Decouple filemem from platform and move it to pgalloc.MemoryFile.Jamie Liu
This is in preparation for improved page cache reclaim, which requires greater integration between the page cache and page allocator. PiperOrigin-RevId: 238444706 Change-Id: Id24141b3678d96c7d7dc24baddd9be555bffafe4
2019-03-11Add profiling commands to runscFabricio Voznika
Example: runsc debug --root=<dir> \ --profile-heap=/tmp/heap.prof \ --profile-cpu=/tmp/cpu.prod --profile-delay=30 \ <container ID> PiperOrigin-RevId: 237848456 Change-Id: Icff3f20c1b157a84d0922599eaea327320dad773
2019-01-29runsc: reap a sandbox process only in sandbox.Wait()Andrei Vagin
PiperOrigin-RevId: 231504064 Change-Id: I585b769aef04a3ad7e7936027958910a6eed9c8d
2019-01-18Scrub runsc error messagesFabricio Voznika
Removed "error" and "failed to" prefix that don't add value from messages. Adjusted a few other messages. In particular, when the container fail to start, the message returned is easier for humans to read: $ docker run --rm --runtime=runsc alpine foobar docker: Error response from daemon: OCI runtime start failed: <path> did not terminate sucessfully: starting container: starting root container [foobar]: starting sandbox: searching for executable "foobar", cwd: "/", $PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin": no such file or directory Closes #77 PiperOrigin-RevId: 230022798 Change-Id: I83339017c70dae09e4f9f8e0ea2e554c4d5d5cd1
2018-12-28Simplify synchronization between runsc and sandbox processFabricio Voznika
Make 'runsc create' join cgroup before creating sandbox process. This removes the need to synchronize platform creation and ensure that sandbox process is charged to the right cgroup from the start. PiperOrigin-RevId: 227166451 Change-Id: Ieb4b18e6ca0daf7b331dc897699ca419bc5ee3a2
2018-12-07sentry: turn "dynamically-created" procfs files into static creation.Zhaozhong Ni
PiperOrigin-RevId: 224600982 Change-Id: I547253528e24fb0bb318fc9d2632cb80504acb34
2018-11-09Close donated files if containerManager.Start() failsFabricio Voznika
PiperOrigin-RevId: 220869535 Change-Id: I9917e5daf02499f7aab6e2aa4051c54ff4461b9a
2018-11-07Add more logging to controller.goFabricio Voznika
PiperOrigin-RevId: 220519632 Change-Id: Iaeec007fc1aa3f0b72569b288826d45f2534c4bf
2018-11-05Fix race between start and destroyFabricio Voznika
Before this change, a container starting up could race with destroy (aka delete) and leave processes behind. Now, whenever a container is created, Loader.processes gets a new entry. Start now expects the entry to be there, and if it's not it means that the container was deleted. I've also fixed Loader.waitPID to search for the process using the init process's PID namespace. We could use a few more tests for signal and wait. I'll send them in another cl. PiperOrigin-RevId: 220224290 Change-Id: I15146079f69904dc07d43c3b66cc343a2dab4cc4
2018-11-05Log when external signal is receivedFabricio Voznika
PiperOrigin-RevId: 220204591 Change-Id: I21a9c6f5c12a376d18da5d10c1871837c4f49ad2
2018-10-19Use correct company name in copyright headerIan Gudger
PiperOrigin-RevId: 217951017 Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
2018-10-17runsc: Support job control signals for the root container.Nicolas Lacasse
Now containers run with "docker run -it" support control characters like ^C and ^Z. This required refactoring our signal handling a bit. Signals delivered to the "runsc boot" process are turned into loader.Signal calls with the appropriate delivery mode. Previously they were always sent directly to PID 1. PiperOrigin-RevId: 217566770 Change-Id: I5b7220d9a0f2b591a56335479454a200c6de8732
2018-10-01runsc: Support job control signals in "exec -it".Nicolas Lacasse
Terminal support in runsc relies on host tty file descriptors that are imported into the sandbox. Application tty ioctls are sent directly to the host fd. However, those host tty ioctls are associated in the host kernel with a host process (in this case runsc), and the host kernel intercepts job control characters like ^C and send signals to the host process. Thus, typing ^C into a "runsc exec" shell will send a SIGINT to the runsc process. This change makes "runsc exec" handle all signals, and forward them into the sandbox via the "ContainerSignal" urpc method. Since the "runsc exec" is associated with a particular container process in the sandbox, the signal must be associated with the same container process. One big difficulty is that the signal should not necessarily be sent to the sandbox process started by "exec", but instead must be sent to the foreground process group for the tty. For example, we may exec "bash", and from bash call "sleep 100". A ^C at this point should SIGINT sleep, not bash. To handle this, tty files inside the sandbox must keep track of their foreground process group, which is set/get via ioctls. When an incoming ContainerSignal urpc comes in, we look up the foreground process group via the tty file. Unfortunately, this means we have to expose and cache the tty file in the Loader. Note that "runsc exec" now handles signals properly, but "runs run" does not. That will come in a later CL, as this one is complex enough already. Example: root@:/usr/local/apache2# sleep 100 ^C root@:/usr/local/apache2# sleep 100 ^Z [1]+ Stopped sleep 100 root@:/usr/local/apache2# fg sleep 100 ^C root@:/usr/local/apache2# PiperOrigin-RevId: 215334554 Change-Id: I53cdce39653027908510a5ba8d08c49f9cf24f39
2018-09-28Make runsc kill and delete more conformant to the "spec"Fabricio Voznika
PiperOrigin-RevId: 214976251 Change-Id: I631348c3886f41f63d0e77e7c4f21b3ede2ab521
2018-09-27Merge Loader.containerRootTGs and execProcess into a single mapFabricio Voznika
It's easier to manage a single map with processes that we're interested to track. This will make the next change to clean up the map on destroy easier. PiperOrigin-RevId: 214894210 Change-Id: I099247323a0487cd0767120df47ba786fac0926d
2018-09-27Implement 'runsc kill --all'Fabricio Voznika
In order to implement kill --all correctly, the Sentry needs to track all tasks that belong to a given container. This change introduces ContainerID to the task, that gets inherited by all children. 'kill --all' then iterates over all tasks comparing the ContainerID field to find all processes that need to be signalled. PiperOrigin-RevId: 214841768 Change-Id: I693b2374be8692d88cc441ef13a0ae34abf73ac6
2018-09-27Refactor 'runsc boot' to take container ID as argumentFabricio Voznika
This makes the flow slightly simpler (no need to call Loader.SetRootContainer). And this is required change to tag tasks with container ID inside the Sentry. PiperOrigin-RevId: 214795210 Change-Id: I6ff4af12e73bb07157f7058bb15fd5bb88760884
2018-09-20Wait for all async fs operations to complete before returning from Destroy.Nicolas Lacasse
Destroy flushes dirent references, which triggers many async close operations. We must wait for those to finish before returning from Destroy, otherwise we may kill the gofer, causing a cascade of failing RPCs and leading to an inconsistent FS state. PiperOrigin-RevId: 213884637 Change-Id: Id054b47fc0f97adc5e596d747c08d3b97a1d1f71
2018-09-19runsc: Fix stdin/stdout/stderr in multi-container mode.Kevin Krakauer
The issue with the previous change was that the stdin/stdout/stderr passed to the sentry were dup'd by host.ImportFile. This left a dangling FD that by never closing caused containerd to timeout waiting on container stop. PiperOrigin-RevId: 213753032 Change-Id: Ia5e4c0565c42c8610d3b59f65599a5643b0901e4
2018-09-19Add container.Destroy urpc method.Nicolas Lacasse
This method will: 1. Stop the container process if it is still running. 2. Unmount all sanadbox-internal mounts for the container. 3. Delete the contaner root directory inside the sandbox. Destroy is idempotent, and safe to call concurrantly. This fixes a bug where after stopping a container, we cannot unmount the container root directory on the host. This bug occured because the sandbox dirent cache was holding a dirent with a host fd corresponding to a file inside the container root on the host. The dirent cache did not know that the container had exited, and kept the FD open, preventing us from unmounting on the host. Now that we unmount (and flush) all container mounts inside the sandbox, any host FDs donated by the gofer will be closed, and we can unmount the container root on the host. PiperOrigin-RevId: 213737693 Change-Id: I28c0ff4cd19a08014cdd72fec5154497e92aacc9
2018-09-18Automated rollback of changelist 213307171Kevin Krakauer
PiperOrigin-RevId: 213504354 Change-Id: Iadd42f0ca4b7e7a9eae780bee9900c7233fb4f3f
2018-09-17runsc: Enable waiting on exited processes.Kevin Krakauer
This makes `runsc wait` behave more like waitpid()/wait4() in that: - Once a process has run to completion, you can wait on it and get its exit code. - Processes not waited on will consume memory (like a zombie process) PiperOrigin-RevId: 213358916 Change-Id: I5b5eca41ce71eea68e447380df8c38361a4d1558
2018-09-17runsc: Fix stdin/out/err in multi-container mode.Kevin Krakauer
Stdin/out/err weren't being sent to the sentry. PiperOrigin-RevId: 213307171 Change-Id: Ie4b634a58b1b69aa934ce8597e5cc7a47a2bcda2
2018-09-13runsc: Support container signal/wait.Lantao Liu
This CL: 1) Fix `runsc wait`, it now also works after the container exits; 2) Generate correct container state in Load; 2) Make sure `Destory` cleanup everything before successfully return. PiperOrigin-RevId: 212900107 Change-Id: Ie129cbb9d74f8151a18364f1fc0b2603eac4109a
2018-09-12runsc: Add exec flag that specifies where to save the sandbox-internal pid.Kevin Krakauer
This is different from the existing -pid-file flag, which saves a host pid. PiperOrigin-RevId: 212713968 Change-Id: I2c486de8dd5cfd9b923fb0970165ef7c5fc597f0
2018-09-11platform: Pass device fd into platform constructor.Nicolas Lacasse
We were previously openining the platform device (i.e. /dev/kvm) inside the platfrom constructor (i.e. kvm.New). This requires that we have RW access to the platform device when constructing the platform. However, now that the runsc sandbox process runs as user "nobody", it is not able to open the platform device. This CL changes the kvm constructor to take the platform device FD, rather than opening the device file itself. The device file is opened outside of the sandbox and passed to the sandbox process. PiperOrigin-RevId: 212505804 Change-Id: I427e1d9de5eb84c84f19d513356e1bb148a52910
2018-09-07runsc: Support multi-container exec.Nicolas Lacasse
We must use a context.Context with a Root Dirent that corresponds to the container's chroot. Previously we were using the root context, which does not have a chroot. Getting the correct context required refactoring some of the path-lookup code. We can't lookup the path without a context.Context, which requires kernel.CreateProcArgs, which we only get inside control.Execute. So we have to do the path lookup much later than we previously were. PiperOrigin-RevId: 212064734 Change-Id: I84a5cfadacb21fd9c3ab9c393f7e308a40b9b537
2018-09-05runsc: Support runsc kill multi-container.Kevin Krakauer
Now, we can kill individual containers rather than the entire sandbox. PiperOrigin-RevId: 211748106 Change-Id: Ic97e91db33d53782f838338c4a6d0aab7a313ead
2018-09-05runsc: Promote getExecutablePathInternal to getExecutablePath.Nicolas Lacasse
Remove GetExecutablePath (the non-internal version). This makes path handling more consistent between exec, root, and child containers. The new getExecutablePath now uses MountNamespace.FindInode, which is more robust than Walking the Dirent tree ourselves. This also removes the last use of lstat(2) in the sentry, so that can be removed from the filters. PiperOrigin-RevId: 211683110 Change-Id: Ic8ec960fc1c267aa7d310b8efe6e900c88a9207a
2018-08-27Put fsgofer inside chrootFabricio Voznika
Now each container gets its own dedicated gofer that is chroot'd to the rootfs path. This is done to add an extra layer of security in case the gofer gets compromised. PiperOrigin-RevId: 210396476 Change-Id: Iba21360a59dfe90875d61000db103f8609157ca0
2018-08-24runsc: Terminal support for "docker exec -ti".Nicolas Lacasse
This CL adds terminal support for "docker exec". We previously only supported consoles for the container process, but not exec processes. The SYS_IOCTL syscall was added to the default seccomp filter list, but only for ioctls that get/set winsize and termios structs. We need to allow these ioctl for all containers because it's possible to run "exec -ti" on a container that was started without an attached console, after the filters have been installed. Note that control-character signals are still not properly supported. Tested with: $ docker run --runtime=runsc -it alpine In another terminial: $ docker exec -it <containerid> /bin/sh PiperOrigin-RevId: 210185456 Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
2018-08-15runsc fsgofer: Support dynamic serving of filesystems.Kevin Krakauer
When multiple containers run inside a sentry, each container has its own root filesystem and set of mounts. Containers are also added after sentry boot rather than all configured and known at boot time. The fsgofer needs to be able to serve the root filesystem of each container. Thus, it must be possible to add filesystems after the fsgofer has already started. This change: * Creates a URPC endpoint within the gofer process that listens for requests to serve new content. * Enables the sentry, when starting a new container, to add the new container's filesystem. * Mounts those new filesystems at separate roots within the sentry. PiperOrigin-RevId: 208903248 Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 21:02:16 +0000