summaryrefslogtreecommitdiffhomepage
path: root/pkg
AgeCommit message (Collapse)Author
2018-11-15Advertise vsyscall support via /proc/<pid>/maps.Rahat Mahmood
Also update test utilities for probing vsyscall support and add a metric to see if vsyscalls are actually used in sandboxes. PiperOrigin-RevId: 221698834 Change-Id: I57870ecc33ea8c864bd7437833f21aa1e8117477
2018-11-15Allow setting sticky bit in tmpfs permissions.Nicolas Lacasse
PiperOrigin-RevId: 221683127 Change-Id: Ide6a9f41d75aa19d0e2051a05a1e4a114a4fb93c
2018-11-15Process delayed packets when delay is disabledIan Gudger
Moving the wakeup logic into the disable blocks is an optimization. PiperOrigin-RevId: 221677028 Change-Id: Ib5a5a6d52cc77b4bbc5dedcad9ee1dbb3da98deb
2018-11-14Rename incorrectly named (dst, src) arguments in DeliverNetworkPacket prototypeBert Muthalaly
...to (remote, local), reflecting the (correct) names in the implementation of DeliverNetworkPacket (see tcpip/stack/nic.go). Also trim the names in DeliverNetworkPacket and elsewhere to avoid stuttering; since the type is tcpip.LinkAddress, there's no need to include "LinkAddr" in the parameter names. Note that every callsite passes arguments in the order (src, dst). PiperOrigin-RevId: 221514396 Change-Id: I3637454ad0d6e62a19e4dcbc2a16493798bd0f09
2018-11-14Clean up tcp.sendDataIan Gudger
PiperOrigin-RevId: 221484739 Change-Id: I44c71f79f99d0d00a2e70a7f06d7024a62a5de0a
2018-11-13Implement TCP_NODELAY and TCP_CORKIan Gudger
Previously, TCP_NODELAY was always enabled and we would lie about it being configurable. TCP_NODELAY is now disabled by default (to match Linux) in the socket layer so that non-gVisor users don't automatically start using this questionable optimization. PiperOrigin-RevId: 221368472 Change-Id: Ib0240f66d94455081f4e0ca94f09d9338b2c1356
2018-11-12Internal change.Googler
PiperOrigin-RevId: 221189534 Change-Id: Id20d318bed97d5226b454c9351df396d11251e1f
2018-11-12Remove obsolete TODOIan Gudger
PiperOrigin-RevId: 221117846 Change-Id: I2a43fd8135b1d1194ff81e98644ce6b6182ece50
2018-11-09Add an implementation of a SACK scoreboard as per RFC6675.Bhasker Hariharan
PiperOrigin-RevId: 220866996 Change-Id: I89d48215df57c00d6a6ec512fc18712a2ea9080b
2018-11-08Implement sync_file_range()Andrei Vagin
sync_file_range - sync a file segment with disk In Linux, sync_file_range() accepts three flags: SYNC_FILE_RANGE_WAIT_BEFORE Wait upon write-out of all pages in the specified range that have already been submitted to the device driver for write-out before performing any write. SYNC_FILE_RANGE_WRITE Initiate write-out of all dirty pages in the specified range which are not presently submitted write-out. Note that even this may block if you attempt to write more than request queue size. SYNC_FILE_RANGE_WAIT_AFTER Wait upon write-out of all pages in the range after performing any write. In this implementation: SYNC_FILE_RANGE_WAIT_BEFORE without SYNC_FILE_RANGE_WAIT_AFTER isn't supported right now. SYNC_FILE_RANGE_WRITE is skipped. It should initiate write-out of all dirty pages, but it doesn't wait, so it should be safe to do nothing while nobody uses SYNC_FILE_RANGE_WAIT_BEFORE. SYNC_FILE_RANGE_WAIT_AFTER is equal to fdatasync(). In Linux, sync_file_range() doesn't writes out the file's meta-data, but fdatasync() does if a file size is changed. PiperOrigin-RevId: 220730840 Change-Id: Iae5dfb23c2c916967d67cf1a1ad32f25eb3f6286
2018-11-08Create stubs for syscalls upto Linux 4.4.Rahat Mahmood
Create syscall stubs for missing syscalls upto Linux 4.4 and advertise a kernel version of 4.4. PiperOrigin-RevId: 220667680 Change-Id: Idbdccde538faabf16debc22f492dd053a8af0ba7
2018-11-07Fix flaky TestCacheResolutionTimeoutFabricio Voznika
Increase timeout to prevent the entry from being found when there is delay on the address resolution goroutine that doesn't mark the request as failed. PiperOrigin-RevId: 220504789 Change-Id: I7e44fd95d8624bd69962f862fbf5517a81395f2a
2018-11-06Internal change.Googler
PiperOrigin-RevId: 220314735 Change-Id: Ic519567e43f6caf042b9f223e517da40640b7d38
2018-11-05Use correct company name in copyright headerIan Gudger
These files were added with the wrong name after all of the existing files were corrected. PiperOrigin-RevId: 220202068 Change-Id: Ia0d15233c1aa69330356a7cf16b5aa00d978e09c
2018-11-05Merge segments in sender's writeListIan Gudger
PiperOrigin-RevId: 220185891 Change-Id: Iaea73fd7b2fa8c399b989cdcaabf4885f370df4b
2018-11-01Add new log format that is compatible with KubernetesFabricio Voznika
Fluentd configuration uses 'log' for the log message while containerd uses 'msg'. Since we can't have a single JSON format for both, add another log format and make debug log configurable. PiperOrigin-RevId: 219729658 Change-Id: I2a6afc4034d893ab90bafc63b394c4fb62b2a7a0
2018-11-01Make error messages a bit more user friendly.Ian Lewis
Updated error messages so that it doesn't print full Go struct representations when running a new container in a sandbox. For example, this occurs frequently when commands are not found when doing a 'kubectl exec'. PiperOrigin-RevId: 219729141 Change-Id: Ic3a7bc84cd7b2167f495d48a1da241d621d3ca09
2018-11-01Prevent premature destruction of shm segments.Rahat Mahmood
Shm segments can be marked for lazy destruction via shmctl(IPC_RMID), which destroys a segment once it is no longer attached to any processes. We were unconditionally decrementing the segment refcount on shmctl(IPC_RMID) which allowed a user to force a segment to be destroyed by repeatedly calling shmctl(IPC_RMID), with outstanding memory maps to the segment. This is problematic because the memory released by a segment destroyed this way can be reused by a different process while remaining accessible by the process with outstanding maps to the segment. PiperOrigin-RevId: 219713660 Change-Id: I443ab838322b4fb418ed87b2722c3413ead21845
2018-11-01modify modeRegexp to adapt the default spec of containerdJuan
https://github.com/containerd/containerd/blob/master/oci/spec.go#L206, the mode=755 didn't match the pattern modeRegexp = regexp.MustCompile("0[0-7][0-7][0-7]"). Closes #112 Signed-off-by: Juan <xionghuan.cn@gmail.com> Change-Id: I469e0a68160a1278e34c9e1dbe4b7784c6f97e5a PiperOrigin-RevId: 219672525
2018-10-31Mark amutex_test as flaky.Rahat Mahmood
PiperOrigin-RevId: 219575226 Change-Id: If4e67b29110332c94013513fb111ec7e019f2915
2018-10-31Fix a race where keepalives could be sent while there is pending dataIan Gudger
PiperOrigin-RevId: 219571556 Change-Id: I5a1042c1cb05eb2711eb01627fd298bad6c543a6
2018-10-31Use syserr style error translation in netstack's rawfileIan Gudger
Replacing map lookups with slice indexing is higher performance. PiperOrigin-RevId: 219569901 Change-Id: I9b7cd22abd4b95383025edbd5a80d1c1a4496936
2018-10-31kvm: simplify floating point logic.Adin Scannell
This reduces the number of floating point save/restore cycles required (since we don't need to restore immediately following the switch, this always happens in a known context) and allows the kernel hooks to capture state. This lets us remove calls like "Current()". PiperOrigin-RevId: 219552844 Change-Id: I7676fa2f6c18b9919718458aa888b832a7db8cab
2018-10-31kvm: add detailed traces on vCPU errors.Adin Scannell
This improves debuggability greatly. PiperOrigin-RevId: 219551560 Change-Id: I2ecaffdd1c17b0d9f25911538ea6f693e2bc699f
2018-10-31kvm: avoid siginfo allocations.Adin Scannell
PiperOrigin-RevId: 219492587 Change-Id: I47f6fc0b74a4907ab0aff03d5f26453bdb983bb5
2018-10-31Remove ipv4.endpoint.addressTamir Duberstein
This field was added in the intial implementation, before Route existed to pass the local and remote addresses to the packet-writing path. Today, the Route's members should be respected. A similar bug was previously fixed in 214650822. PiperOrigin-RevId: 219474095 Change-Id: Id2a8ee4421d2841c8d88ccb3c193c455086350ee
2018-10-30kvm: use private futexes.Adin Scannell
Use private futexes for performance and to align with other runtime uses. PiperOrigin-RevId: 219422634 Change-Id: Ief2af5e8302847ea6dc246e8d1ee4d64684ca9dd
2018-10-30Clean up cpuid_parse_testMichael Pratt
Actually parse flags from cpuinfo to avoid mistakenly matching substrings in cpuinfo that happen to match a flags. Some features were only exposed in recent versions of Linux. Don't require them to appear in cpuinfo on old versions of Linux. Move PREFETCHWT1 back to parse only features. It isn't actually exposed in Linux yet. Move SDBG to shown features. It has been visible since Linux 4.3. PiperOrigin-RevId: 219381731 Change-Id: Ied7c0ee7c8a9879683e81933de56c9074b01108f
2018-10-26Add AMD-specific features to cpuid packageMichael Pratt
Extend the cpuid package to parse and emulate cpuid features that exist only on AMD and not Intel. The least straightforward part of this is that AMD duplicates several block 1 features in block 6. Thus we ignore those features when parsing block 6 and add them when emulating. PiperOrigin-RevId: 218935032 Change-Id: Id41bf1c24720b0d9b968e2c19ab5bc00a6d62bd4
2018-10-26Add block 3 features to /proc/cpuinfoMichael Pratt
Linux added these block 3 features to the end of /proc/cpuinfo in dfb4a70f20c5b3880da56ee4c9484bdb4e8f1e65. This also fixes that block 3 features were completely missing from FeatureSet.FlagsString(false) because FlagsString only prints Linux blocks regardless of the cpuinfo option. PiperOrigin-RevId: 218913816 Change-Id: I2f9c38c7c9da4b247a140877d4aca782e80684bd
2018-10-26Order feature strings by blockMichael Pratt
PiperOrigin-RevId: 218894181 Change-Id: I97d0c74175f4aa528363f768a0a85d6953ea0bfd
2018-10-24Use TRAP to simplify vsyscall emulation.Adin Scannell
PiperOrigin-RevId: 218592058 Change-Id: I373a2d813aa6cc362500dd5a894c0b214a1959d7
2018-10-24Convert Unix transport to syserrIan Gudger
Previously this code used the tcpip error space. Since it is no longer part of netstack, it can use the sentry's error space (except for a few cases where there is still some shared code. This reduces the number of error space conversions required for hot Unix socket operations. PiperOrigin-RevId: 218541611 Change-Id: I3d13047006a8245b5dfda73364d37b8a453784bb
2018-10-24Mark netstack/tcpip/transport/tcp:tcp_test flakyFabricio Voznika
PiperOrigin-RevId: 218537640 Change-Id: I1c5f55a46390174e1f5caeff74b1a364fa3268d9
2018-10-24Run ptrace stubs in their own session and process group.Nicolas Lacasse
Pseudoterminal job control signals are meant to be received and handled by the sandbox process, but if the ptrace stubs are running in the same process group, they will receive the signals as well and inject then into the sentry kernel. This can result in duplicate signals being delivered (often to the wrong process), or a sentry panic if the ptrace stub is inactive. This CL makes the ptrace stub run in a new session. PiperOrigin-RevId: 218536851 Change-Id: Ie593c5687439bbfbf690ada3b2197ea71ed60a0e
2018-10-23Fix panic on creation of zero-len shm segments.Rahat Mahmood
Attempting to create a zero-len shm segment causes a panic since we try to allocate a zero-len filemem region. The existing code had a guard to disallow this, but the check didn't encode the fact that requesting a private segment implies a segment creation regardless of whether IPC_CREAT is explicitly specified. PiperOrigin-RevId: 218405743 Change-Id: I30aef1232b2125ebba50333a73352c2f907977da
2018-10-23Remove blanket TODO, as it is self-evident.Adin Scannell
PiperOrigin-RevId: 218390517 Change-Id: Ic891c1626e62a6c4ed57f8180740872bcd1be177
2018-10-23Remove artificial name length check.Adin Scannell
This should be determined by the filesystem. PiperOrigin-RevId: 218376553 Change-Id: I55d176e2cdf8acdd6642789af057b98bb8ca25b8
2018-10-23Simplify channel managementTamir Duberstein
The channels {cancel,resCh} have roughly the same lifetime and are used for roughly the same purpose as an entry's waiters; we can unify the state management of the two mechanisms, while also reducing unncessary mutex locking and unlocking. Made some cosmetic changes while I'm here. PiperOrigin-RevId: 218343915 Change-Id: Ic69546a2b7b390162b2231f07f335dd6199472d7
2018-10-23Track paths and provide a rename hook.Adin Scannell
This change also adds extensive testing to the p9 package via mocks. The sanity checks and type checks are moved from the gofer into the core package, where they can be more easily validated. PiperOrigin-RevId: 218296768 Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
2018-10-20Refcount Unix transport queueIan Gudger
This allows us to release messages in the queue when all users close. PiperOrigin-RevId: 218033550 Change-Id: I2f6e87650fced87a3977e3b74c64775c7b885c1b
2018-10-20Add more unimplemented syscall eventsFabricio Voznika
Added events for *ctl syscalls that may have multiple different commands. For runsc, each syscall event is only logged once. For *ctl syscalls, use the cmd as identifier, not only the syscall number. PiperOrigin-RevId: 218015941 Change-Id: Ie3c19131ae36124861e9b492a7dbe1765d9e5e59
2018-10-19Use correct company name in copyright headerIan Gudger
PiperOrigin-RevId: 217951017 Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
2018-10-17Use generic ilist in Unix transport queueIan Gudger
This should improve performance. PiperOrigin-RevId: 217610560 Change-Id: I370f196ea2396f1715a460b168ecbee197f94d6c
2018-10-17Check thread group CPU timers in the CPU clock ticker.Jamie Liu
This reduces the number of goroutines and runtime timers when ITIMER_VIRTUAL or ITIMER_PROF are enabled, or when RLIMIT_CPU is set. This also ensures that thread group CPU timers only advance if running tasks are observed at the time the CPU clock advances, mostly eliminating the possibility that a CPU timer expiration observes no running tasks and falls back to the group leader. PiperOrigin-RevId: 217603396 Change-Id: Ia24ce934d5574334857d9afb5ad8ca0b6a6e65f4
2018-10-17Merge queue into Unix transportIan Gudger
This queue only has a single user, so there is no need for it to use an interface. Merging it into the same package as its sole user allows us to avoid a circular dependency. This simplifies the code and should slightly improve performance. PiperOrigin-RevId: 217595889 Change-Id: Iabbd5164240b935f79933618c61581bc8dcd2822
2018-10-17Fix typos in socket_testIan Gudger
PiperOrigin-RevId: 217576188 Change-Id: I82e45c306c5c9161e207311c7dbb8a983820c1df
2018-10-17Reflow comment to 80 columnsMichael Pratt
PiperOrigin-RevId: 217573168 Change-Id: Ic1914d0ef71bab020e3ee11cf9c4a50a702bd8dd
2018-10-17runsc: Support job control signals for the root container.Nicolas Lacasse
Now containers run with "docker run -it" support control characters like ^C and ^Z. This required refactoring our signal handling a bit. Signals delivered to the "runsc boot" process are turned into loader.Signal calls with the appropriate delivery mode. Previously they were always sent directly to PID 1. PiperOrigin-RevId: 217566770 Change-Id: I5b7220d9a0f2b591a56335479454a200c6de8732
2018-10-17Fix PTRACE_GETREGSET write sizeMichael Pratt
The existing logic is backwards and writes iov_len == 0 for a full write. PiperOrigin-RevId: 217560377 Change-Id: I5a39c31bf0ba9063a8495993bfef58dc8ab7c5fa
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 17:24:12 +0000