summaryrefslogtreecommitdiffhomepage
path: root/pkg
AgeCommit message (Collapse)Author
2020-01-16Merge release-20200115.0-4-ga7a1f00 (automated)gVisor bot
2020-01-15Support upgrading expired/removed IPv6 addresses to permanent SLAAC addressesGhanan Gowripalan
If a previously added IPv6 address (statically or via SLAAC) was removed, it would be left in an expired state waiting to be cleaned up if any references to it were still held. During this time, the same address could be regenerated via SLAAC, which should be allowed. This change supports this scenario. When upgrading an endpoint from temporary or permanentExpired to permanent, respect the new configuration type (static or SLAAC) and deprecated status, along with the new PrimaryEndpointBehavior (which was already supported). Test: stack.TestAutoGenAddrAfterRemoval PiperOrigin-RevId: 289990168
2020-01-16Merge release-20200115.0-3-g815df29 (automated)gVisor bot
2020-01-15Solicit IPv6 routers when a NIC becomes enabled as a hostGhanan Gowripalan
This change adds support to send NDP Router Solicitation messages when a NIC becomes enabled as a host, as per RFC 4861 section 6.3.7. Note, Router Solicitations will only be sent when the stack has forwarding disabled. Tests: Unittests to make sure that the initial Router Solicitations are sent as configured. The tests also validate the sent Router Solicitations' fields. PiperOrigin-RevId: 289964095
2020-01-16Merge release-20200115.0-2-gd6fb1ec (automated)gVisor bot
2020-01-15Add timestamps to VFS2 tmpfs, and implement some of SetStat.Nicolas Lacasse
PiperOrigin-RevId: 289962040
2020-01-15Merge release-20191213.0-121-g2ebd214 (automated)gVisor bot
2020-01-15Merge pull request #1540 from laijs:fix-PCIDsgVisor bot
PiperOrigin-RevId: 289925133
2020-01-15Merge release-20191213.0-119-g275ac8c (automated)gVisor bot
2020-01-15Bugfix to terminate the protocol loop on StateError.Bhasker Hariharan
The change to introduce worker goroutines can cause the endpoint to transition to StateError and we should terminate the loop rather than let the endpoint transition to a CLOSED state as we do in case the endpoint enters TIME-WAIT/CLOSED. Moving to a closed state would cause the actual error to not be propagated to any read() calls etc. PiperOrigin-RevId: 289923568
2020-01-15Merge release-20191213.0-117-gff78a72 (automated)gVisor bot
2020-01-14enable pkg/sentry/arch to support arm64 basicallylubinszARM
Signed-off-by: Bin Lu <bin.lu@arm.com> Change-Id: I9cce23db4e5caec82ce42b4970fdb7f7e8c08f1d COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/773 from lubinszARM:pr_arch_basic 3fe2fd8e6286766bbe489ef971dce204f924feba PiperOrigin-RevId: 289795569
2020-01-14Merge release-20191213.0-116-ga611fda (automated)gVisor bot
2020-01-14Changes TCP packet dispatch to use a pool of goroutines.Bhasker Hariharan
All inbound segments for connections in ESTABLISHED state are delivered to the endpoint's queue but for every segment delivered we also queue the endpoint for processing to a selected processor. This ensures that when there are a large number of connections in ESTABLISHED state the inbound packets are all handled by a small number of goroutines and significantly reduces the amount of work the goscheduler has to perform. We let connections in other states follow the current path where the endpoint's goroutine directly handles the segments. Updates #231 PiperOrigin-RevId: 289728325
2020-01-14Merge release-20191213.0-115-g50625ce (automated)gVisor bot
2020-01-14Implement {g,s}etsockopt(IP_RECVTOS) for UDP socketsTamir Duberstein
PiperOrigin-RevId: 289718534
2020-01-14Merge release-20191213.0-114-g1ad8381 (automated)gVisor bot
2020-01-13Do Source Address Selection when choosing an IPv6 source addressGhanan Gowripalan
Do Source Address Selection when choosing an IPv6 source address as per RFC 6724 section 5 rules 1-3: 1) Prefer same address 2) Prefer appropriate scope 3) Avoid deprecated addresses. A later change will update Source Address Selection to follow rules 4-8. Tests: Rule 1 & 2: stack.TestIPv6SourceAddressSelectionScopeAndSameAddress, Rule 3: stack.TestAutoGenAddrTimerDeprecation, stack.TestAutoGenAddrDeprecateFromPI PiperOrigin-RevId: 289559373
2020-01-13Merge release-20191213.0-113-gdebd213 (automated)gVisor bot
2020-01-13Allow dual stack sockets to operate on AF_INETTamir Duberstein
Fixes #1490 Fixes #1495 PiperOrigin-RevId: 289523250
2020-01-13Merge release-20191213.0-111-gb30cfb1 (automated)gVisor bot
2020-01-13Merge pull request #1528 from kevinGC:iptables-writegVisor bot
PiperOrigin-RevId: 289479774
2020-01-10Automated rollback of changelist 288990597Ghanan Gowripalan
PiperOrigin-RevId: 289169518
2020-01-10Put CancellableTimer tests in the tcpip_test packageGhanan Gowripalan
CancellableTimer tests were in a timer_test package but lived within the tcpip directory. This caused issues with go tools. PiperOrigin-RevId: 289166345
2020-01-10goid: new packageIan Gudger
Allows retrieving the goroutine ID for concurrency testing when the race detector is enabled. Updates #1472 PiperOrigin-RevId: 289155308
2020-01-10Merge release-20191213.0-97-gdacd349 (automated)gVisor bot
2020-01-10panic fix in retransmitTimerExpired.Bhasker Hariharan
This is a band-aid fix for now to prevent panics. PiperOrigin-RevId: 289078453
2020-01-10Merge release-20191213.0-96-g27500d5 (automated)gVisor bot
2020-01-09New sync package.Ian Gudger
* Rename syncutil to sync. * Add aliases to sync types. * Replace existing usage of standard library sync package. This will make it easier to swap out synchronization primitives. For example, this will allow us to use primitives from github.com/sasha-s/go-deadlock to check for lock ordering violations. Updates #1472 PiperOrigin-RevId: 289033387
2020-01-10Merge release-20191213.0-95-gb08da42 (automated)gVisor bot
2020-01-09Merge pull request #1523 from majek:fix-1522-silly-window-rxgVisor bot
PiperOrigin-RevId: 289019953
2020-01-10Merge release-20191213.0-90-g26c5653 (automated)gVisor bot
2020-01-09Inform NDPDispatcher when Stack learns about available configurations via DHCPv6Ghanan Gowripalan
Inform the Stack's NDPDispatcher when it receives an NDP Router Advertisement that updates the available configurations via DHCPv6. The Stack makes sure that its NDPDispatcher isn't informed unless the avaiable configurations via DHCPv6 for a NIC is updated. Tests: Test that a Stack's NDPDispatcher is informed when it receives an NDP Router Advertisement that informs it of new configurations available via DHCPv6. PiperOrigin-RevId: 289001283
2020-01-09Separate NDP tests into its own packageGhanan Gowripalan
Internal tools timeout after 60s during tests that are required to pass before changes can be submitted. Separate out NDP tests into its own package to help prevent timeouts when testing. PiperOrigin-RevId: 288990597
2020-01-09Merge release-20191213.0-88-gee3158f (automated)gVisor bot
2020-01-09Merge pull request #1423 from xiaobo55x:stracegVisor bot
PiperOrigin-RevId: 288965915
2020-01-09Merge release-20191213.0-86-g8643933 (automated)gVisor bot
2020-01-09Change BindToDeviceOption to store NICIDEyal Soha
This makes it possible to call the sockopt from go even when the NIC has no name. PiperOrigin-RevId: 288955236
2020-01-09Merge release-20191213.0-85-ge752ddb (automated)gVisor bot
2020-01-09Allow clients to store an opaque NICContext with NICsBert Muthalaly
...retrievable later via stack.NICInfo(). Clients of this library can use it to add metadata that should be tracked alongside a NIC, to avoid having to keep a map[tcpip.NICID]metadata mirroring stack.Stack's nic map. PiperOrigin-RevId: 288924900
2020-01-09Merge release-20191213.0-84-g290908f (automated)gVisor bot
2020-01-09Avoid panic when c.PCIDs is nilLai Jiangshan
When PCID is disabled, there would throw a panic when dropPageTables() access to c.PCID without check. Signed-off-by: Lai Jiangshan <eag0628@gmail.com>
2020-01-09Merge release-20191213.0-83-gd057871 (automated)gVisor bot
2020-01-08CancellableTimer to encapsulate the work of safely stopping timersGhanan Gowripalan
Add a new CancellableTimer type to encapsulate the work of safely stopping timers when it fires at the same time some "related work" is being handled. The term "related work" is some work that needs to be done while having obtained some common lock (L). Example: Say we have an invalidation timer that may be extended or cancelled by some event. Creating a normal timer and simply cancelling may not be sufficient as the timer may have already fired when the event handler attemps to cancel it. Even if the timer and event handler obtains L before doing work, once the event handler releases L, the timer will eventually obtain L and do some unwanted work. To prevent the timer from doing unwanted work, it checks if it should early return instead of doing the normal work after obtaining L. When stopping the timer callers must have L locked so the timer can be safely informed that it should early return. Test: Tests that CancellableTimer fires and resets properly. Test to make sure the timer fn is not called after being stopped within the lock L. PiperOrigin-RevId: 288806984
2020-01-09Merge release-20191213.0-82-gfbb2c00 (automated)gVisor bot
2020-01-08More GH comments.Kevin Krakauer
2020-01-08Return correct length with MSG_TRUNC for unix sockets.Ian Lewis
This change calls a new Truncate method on the EndpointReader in RecvMsg for both netlink and unix sockets. This allows readers such as sockets to peek at the length of data without actually reading it to a buffer. Fixes #993 #1240 PiperOrigin-RevId: 288800167
2020-01-08Define sizes for extent headers and entries separately to improve clarity.Dean Deng
PiperOrigin-RevId: 288799694
2020-01-09Merge release-20191213.0-80-gb3ae8a6 (automated)gVisor bot
2020-01-08Addressed GH commentsKevin Krakauer
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 00:52:40 +0000