Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 294257911
|
|
Fixes #1255
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I8614e6f3ee321c2989567e4e712aa8f28cc9db14
|
|
Note that these are only implemented for tmpfs, and other impls will still
return EOPNOTSUPP.
PiperOrigin-RevId: 293899385
|
|
Log 8, 16, and 32 int optvals and dump the memory of other sizes.
Updates #1782
PiperOrigin-RevId: 293889388
|
|
|
|
Previously, a DAD event would not be sent if DAD was disabled.
This allows integrators to do some work when an IPv6 address is bound to
a NIC without special logic that checks if DAD is enabled.
Without this change, integrators would need to check if a NIC has DAD
enabled when an address is auto-generated. If DAD is enabled, it would
need to delay the work until the DAD completion event; otherwise, it
would need to do the work in the address auto-generated event handler.
Test: stack_test.TestDADDisabled
PiperOrigin-RevId: 293732914
|
|
|
|
Auto-generated link-local addresses should have the same lifecycle hooks
as global SLAAC addresses.
The Stack's NDP dispatcher should be notified when link-local addresses
are auto-generated and invalidated. They should also be removed when a
NIC is disabled (which will be supported in a later change).
Tests:
- stack_test.TestNICAutoGenAddrWithOpaque
- stack_test.TestNICAutoGenAddr
PiperOrigin-RevId: 293706760
|
|
Addresses may be added before a NIC is enabled. Make sure DAD is
performed on the permanent IPv6 addresses when they get enabled.
Test:
- stack_test.TestDoDADWhenNICEnabled
- stack.TestDisabledRxStatsWhenNICDisabled
PiperOrigin-RevId: 293697429
|
|
The types gonet.Conn and gonet.PacketConn were confusingly named as both
implemented net.Conn. Further, gonet.Conn was perhaps unexpectedly
TCP-specific (net.Conn is not). This change renames them to gonet.TCPConn and
gonet.UDPConn.
Renames gonet.NewListener to gonet.ListenTCP and adds a new gonet.NewTCPListner
function to be consistent with both the gonet.DialXxx and gonet.NewXxxConn
functions as well as net.ListenTCP.
Updates #1632
PiperOrigin-RevId: 293671303
|
|
Get the link address for the target of an NDP Neighbor Advertisement
from the NDP Target Link Layer Address option.
Tests:
- ipv6.TestNeighorAdvertisementWithTargetLinkLayerOption
- ipv6.TestNeighorAdvertisementWithInvalidTargetLinkLayerOption
PiperOrigin-RevId: 293632609
|
|
PiperOrigin-RevId: 293617493
|
|
These were out-of-band notes that can help provide additional context
and simplify automated imports.
PiperOrigin-RevId: 293525915
|
|
From RFC 793 s3.9 p58 Event Processing:
If RECEIVE Call arrives in CLOSED state and the user has access to such a
connection, the return should be "error: connection does not exist"
Fixes #1598
PiperOrigin-RevId: 293494287
|
|
|
|
PiperOrigin-RevId: 293411655
|
|
PiperOrigin-RevId: 293271055
|
|
PiperOrigin-RevId: 293243342
|
|
Tests 65k connection attempts on common types of sockets to check for port
leaks.
Also fixes a bug where dual-stack sockets wouldn't properly re-queue
segments received while closing.
PiperOrigin-RevId: 293241166
|
|
The timer ID is copied out to the argument.
Fixes #1738
PiperOrigin-RevId: 293210801
|
|
This is failing in Go1.14 due to new checkptr constraints. This version
should avoid hitting this constraints by doing "dangerous" pointer math
less dangerously?
PiperOrigin-RevId: 293205764
|
|
Updates #1035
PiperOrigin-RevId: 293194631
|
|
Updates #1198
Opening host pipes (by spinning in fdpipe) and host sockets is not yet
complete, and will be done in a future CL.
Major differences from VFS1 gofer client (sentry/fs/gofer), with varying levels
of backportability:
- "Cache policies" are replaced by InteropMode, which control the behavior of
timestamps in addition to caching. Under InteropModeExclusive (analogous to
cacheAll) and InteropModeWritethrough (analogous to cacheAllWritethrough),
client timestamps are *not* written back to the server (it is not possible in
9P or Linux for clients to set ctime, so writing back client-authoritative
timestamps results in incoherence between atime/mtime and ctime). Under
InteropModeShared (analogous to cacheRemoteRevalidating), client timestamps
are not used at all (remote filesystem clocks are authoritative). cacheNone
is translated to InteropModeShared + new option
filesystemOptions.specialRegularFiles.
- Under InteropModeShared, "unstable attribute" reloading for permission
checks, lookup, and revalidation are fused, which is feasible in VFS2 since
gofer.filesystem controls path resolution. This results in a ~33% reduction
in RPCs for filesystem operations compared to cacheRemoteRevalidating. For
example, consider stat("/foo/bar/baz") where "/foo/bar/baz" fails
revalidation, resulting in the instantiation of a new dentry:
VFS1 RPCs:
getattr("/") // fs.MountNamespace.FindLink() => fs.Inode.CheckPermission() => gofer.inodeOperations.check() => gofer.inodeOperations.UnstableAttr()
walkgetattr("/", "foo") = fid1 // fs.Dirent.walk() => gofer.session.Revalidate() => gofer.cachePolicy.Revalidate()
clunk(fid1)
getattr("/foo") // CheckPermission
walkgetattr("/foo", "bar") = fid2 // Revalidate
clunk(fid2)
getattr("/foo/bar") // CheckPermission
walkgetattr("/foo/bar", "baz") = fid3 // Revalidate
clunk(fid3)
walkgetattr("/foo/bar", "baz") = fid4 // fs.Dirent.walk() => gofer.inodeOperations.Lookup
getattr("/foo/bar/baz") // linux.stat() => gofer.inodeOperations.UnstableAttr()
VFS2 RPCs:
getattr("/") // gofer.filesystem.walkExistingLocked()
walkgetattr("/", "foo") = fid1 // gofer.filesystem.stepExistingLocked()
clunk(fid1)
// No getattr: walkgetattr already updated metadata for permission check
walkgetattr("/foo", "bar") = fid2
clunk(fid2)
walkgetattr("/foo/bar", "baz") = fid3
// No clunk: fid3 used for new gofer.dentry
// No getattr: walkgetattr already updated metadata for stat()
- gofer.filesystem.unlinkAt() does not require instantiation of a dentry that
represents the file to be deleted. Updates #898.
- gofer.regularFileFD.OnClose() skips Tflushf for regular files under
InteropModeExclusive, as it's nonsensical to request a remote file flush
without flushing locally-buffered writes to that remote file first.
- Symlink targets are cached when InteropModeShared is not in effect.
- p9.QID.Path (which is already required to be unique for each file within a
server, and is accordingly already synthesized from device/inode numbers in
all known gofers) is used as-is for inode numbers, rather than being mapped
along with attr.RDev in the client to yet another synthetic inode number.
- Relevant parts of fsutil.CachingInodeOperations are inlined directly into
gofer package code. This avoids having to duplicate part of its functionality
in fsutil.HostMappable.
PiperOrigin-RevId: 293190213
|
|
Internal pipes are supported similarly to how internal UDS is done.
It is also controlled by the same flag.
Fixes #1102
PiperOrigin-RevId: 293150045
|
|
PiperOrigin-RevId: 293029446
|
|
PiperOrigin-RevId: 292624867
|
|
Add a file lock implementation that can be embedded into various filesystem
implementations.
Updates #1480
PiperOrigin-RevId: 292614758
|
|
As per RFC 2464 section 7, an IPv6 packet with a multicast destination
address is transmitted to the mapped Ethernet multicast address.
Test:
- ipv6.TestLinkResolution
- stack_test.TestDADResolve
- stack_test.TestRouterSolicitation
PiperOrigin-RevId: 292610529
|
|
|
|
A couple other things that changed:
- There's a proper extension registration system for matchers. Anyone
adding another matcher can use tcp_matcher.go or udp_matcher.go as a
template.
- All logging and use of syserr.Error in the netfilter package happens at the
highest possible level (public functions). Lower-level functions just
return normal, descriptive golang errors.
|
|
Test: header.TestEthernetAddressFromMulticastIPAddress
PiperOrigin-RevId: 292604649
|
|
PiperOrigin-RevId: 292587459
|
|
|
|
When sending a RST on shutdown we need to double check the
state after acquiring the work mutex as the endpoint could
have transitioned out of a connected state from the time
we checked it and we acquired the workMutex.
I added two tests but sadly neither reproduce the panic. I am
going to leave the tests in as they are good to have anyway.
PiperOrigin-RevId: 292393800
|
|
PiperOrigin-RevId: 292369598
|
|
Splice must not allow negative offsets. Writes also must not allow offset +
size to overflow int64. Reads are similarly broken, but not just in splice
(b/148095030).
Reported-by: syzbot+0e1ff0b95fb2859b4190@syzkaller.appspotmail.com
PiperOrigin-RevId: 292361208
|
|
When sending NDP messages with an unspecified source address, the Source
Link Layer address must not be included.
Test: stack_test.TestDADResolve
PiperOrigin-RevId: 292341334
|
|
Do not start a new goroutine when calling
stack.NDPDispatcher.OnDuplicateAddressDetectionStatus.
PiperOrigin-RevId: 292268574
|
|
PiperOrigin-RevId: 292233574
|
|
|
|
Updates #1480
PiperOrigin-RevId: 292180192
|
|
For amd64, this has been done on cl/288342928.
PiperOrigin-RevId: 292170856
|
|
PiperOrigin-RevId: 292165063
|
|
For test case 'TestBounce', we use KVM_SET_VCPU_EVENTS to trigger sError
to leave guest.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
Currently, Send() will copy data into a new byte slice without regard to the
original size. Size checks should be performed before the allocation takes
place.
Note that for the sake of performance, we avoid putting the buffer
allocation into the critical section. As a result, the size checks need to be
performed again within Enqueue() in case the limit has changed.
PiperOrigin-RevId: 292058147
|
|
WritableSource is a convenience interface used for files that can
be written to, e.g. /proc/net/ipv4/tpc_sack. It reads max of 4KB
and only from offset 0 which should cover most cases. It can be
extended as neeed.
Updates #1195
PiperOrigin-RevId: 292056924
|
|
Updates #1487
Updates #1623
PiperOrigin-RevId: 292040835
|
|
Update link address for senders of NDP Neighbor Solicitations when the NS
contains an NDP Source Link Layer Address option.
Tests:
- ipv6.TestNeighorSolicitationWithSourceLinkLayerOption
- ipv6.TestNeighorSolicitationWithInvalidSourceLinkLayerOption
PiperOrigin-RevId: 292028553
|
|
FD table now holds both VFS1 and VFS2 types and uses the correct
one based on what's set.
Parts of this CL are just initial changes (e.g. sys_read.go,
runsc/main.go) to serve as a template for the remaining changes.
Updates #1487
Updates #1623
PiperOrigin-RevId: 292023223
|
|
PiperOrigin-RevId: 292021389
|