Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 228382827
Change-Id: Ica1d30e0df826bdd77f180a5092b2b735ea5c804
|
|
See modified comment in auth.NewUserCredentials(); compare to the
behavior of setresuid(2) as implemented by
//pkg/sentry/kernel/task_identity.go:kernel.Task.setKUIDsUncheckedLocked().
PiperOrigin-RevId: 228381765
Change-Id: I45238777c8f63fcf41b99fce3969caaf682fe408
|
|
This enables formatting tcpip.Stats readably with %+v.
PiperOrigin-RevId: 228379088
Change-Id: I6a9876454a22f151ee752cf94589b4188729458f
|
|
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
PiperOrigin-RevId: 228249611
Change-Id: I1046e70bec4274f18b9948eefd6b0d546e4c48bb
|
|
PiperOrigin-RevId: 228245523
Change-Id: I5a4d0a6570b93958e51437e917e5331d83e23a7e
|
|
Not allowing this was an oversight.
PiperOrigin-RevId: 227757813
Change-Id: I845800ab69028b7320afca36d832c477ff17c5ce
|
|
Using linux.Errno as an error doesn't work very well as none of the sentry code
expects error to contain a linux.Errno.
This moves using syserr.Error.ToLinux as an error in a syscall handler from a
runtime error to a compile error.
PiperOrigin-RevId: 227744312
Change-Id: Iea63108a5b198296c908614e09c01733dd684da0
|
|
FIO reads this file and expects it to be well formed.
PiperOrigin-RevId: 227554483
Change-Id: Ia48ae2377626dd6a2daf17b5b4f5119f90ece55b
|
|
This option allows multiple sockets to be bound to the same port.
Incoming packets are distributed to sockets using a hash based on source and
destination addresses. This means that all packets from one sender will be
received by the same server socket.
PiperOrigin-RevId: 227153413
Change-Id: I59b6edda9c2209d5b8968671e9129adb675920cf
|
|
epoll_wait acquires EventPoll.listsMu (in EventPoll.ReadEvents) and
then calls Inotify.Readiness which tries to acquire Inotify.evMu.
getdents acquires Inotify.evMu (in Inotify.queueEvent) and then calls
readyCallback.Callback which tries to acquire EventPoll.listsMu.
The fix is to release Inotify.evMu before calling Queue.Notify. Queue
is thread-safe and doesn't require Inotify.evMu to be held.
Closes #121
PiperOrigin-RevId: 227066695
Change-Id: Id29364bb940d1727f33a5dff9a3c52f390c15761
|
|
PiperOrigin-RevId: 226993086
Change-Id: I71757f231436538081d494da32ca69f709bc71c7
|
|
PiperOrigin-RevId: 226936778
Change-Id: I2a6dda157c55d39d81e1b543ab11a58a0bfe5c05
|
|
We don't explicitly support out-of-band data and treat it like normal in-band
data. This is equilivent to SO_OOBINLINE being enabled, so always report that
it is enabled.
PiperOrigin-RevId: 226572742
Change-Id: I4c30ccb83265e76c30dea631cbf86822e6ee1c1b
|
|
PiperOrigin-RevId: 226542979
Change-Id: Ife11ebd0a85b8a63078e6daa71b4a99a82080ac9
|
|
Within gVisor, plumb new socket options to netstack.
Within netstack, fix GetSockOpt and SetSockOpt return value logic.
PiperOrigin-RevId: 226532229
Change-Id: If40734e119eed633335f40b4c26facbebc791c74
|
|
The code that matches the event being published with events watchers
was wronly matching all watchers in case any of the control event bits
were set.
Issue #121
PiperOrigin-RevId: 226521230
Change-Id: Ie2c42bc4366faaf59fbf80a74e9297499bd93f9e
|
|
PiperOrigin-RevId: 226493053
Change-Id: Ia98d1cb6dd0682049e4d907ef69619831de5c34a
|
|
We must wait for all lazy resources to be released before closing the rootFile.
PiperOrigin-RevId: 226419499
Change-Id: I1d4d961a92b3816e02690cf3eaf0a88944d730cc
|
|
PiperOrigin-RevId: 226387521
Change-Id: I0579ab262320fde6c72d2994dd38437f01a99ea5
|
|
"RLIMIT_MEMLOCK: This is the maximum number of bytes of memory that may
be locked into RAM." - getrlimit(2)
PiperOrigin-RevId: 226384346
Change-Id: Iefac4a1bb69f7714dc813b5b871226a8344dc800
|
|
PiperOrigin-RevId: 226224230
Change-Id: Id24c7d3733722fd41d5fe74ef64e0ce8c68f0b12
|
|
Implement pwritev2 and associated unit tests.
Clean up preadv2 unit tests.
Tag RWF_ flags in both preadv2 and pwritev2 with associated bug tickets.
PiperOrigin-RevId: 226222119
Change-Id: Ieb22672418812894ba114bbc88e67f1dd50de620
|
|
Also remove useless RSS changes in mm.movePMAsLocked().
PiperOrigin-RevId: 226052996
Change-Id: If59fd259b93238fb2f15c1c8ebfeda14cb590a87
|
|
... as required by the latter's precondition.
PiperOrigin-RevId: 226033824
Change-Id: I6bc46d0e100c61cc58cb5fc69e70c4ca905cd92d
|
|
PiperOrigin-RevId: 226018694
Change-Id: I98965e26fe565f37e98e5df5f997363ab273c91b
|
|
Connectionless Unix sockets (DGRAM Unix sockets created with the socket system
call) inherently only have a read queue. They do not establish bidirectional
connections, instead, the connect system call only sets a default send
location. Writes give the data to the other endpoint which has its own read
queue.
To simplify the code, connectionless Unix sockets still get read and write
queues, but the write queue is a dummy and never waited on. The read queue is
the connectionless endpoint's queue. This change fixes a bug where the dummy
queue was incorrectly set as the read queue and the endpoint's queue was
incorrectly set as the write queue. This meant that read notifications went
to the dummy queue and were black holed.
PiperOrigin-RevId: 225921042
Change-Id: I8d9059def787a2c3c305185b92d05093fbd2be2a
|
|
The old overlayBoundEndpoint assumed that the lower is not an overlay. It
should check if the lower is an overlay and handle that case.
PiperOrigin-RevId: 225882303
Change-Id: I60660c587d91db2826e0719da0983ec8ad024cb8
|
|
Currently mlock() and friends do nothing whatsoever. However, mlocking
is directly application-visible in a number of ways; for example,
madvise(MADV_DONTNEED) and msync(MS_INVALIDATE) both fail on mlocked
regions. We handle this inconsistently: MADV_DONTNEED is too important
to not work, but MS_INVALIDATE is rejected.
Change MM to track mlocked regions in a manner consistent with Linux.
It still will not actually pin pages into host physical memory, but:
- mlock() will now cause sentry memory management to precommit mlocked
pages.
- MADV_DONTNEED and MS_INVALIDATE will interact with mlocked pages as
described above.
PiperOrigin-RevId: 225861605
Change-Id: Iee187204979ac9a4d15d0e037c152c0902c8d0ee
|
|
Same as with broadcast packets, sending of a multicast packet shouldn't require
accessing the route table. The same applies to IPv6 link-local addresses, which
aren't routable at all (they don't belong to any subnet by definition).
PiperOrigin-RevId: 225775870
Change-Id: Ic53e6560c125a83be2be9c3d112e66b36e8dfe7b
|
|
PiperOrigin-RevId: 225632398
Change-Id: I909e7e2925aa369adc28e844c284d9a6108e85ce
|
|
PiperOrigin-RevId: 225621767
Change-Id: Ie3a42cdf0b0de22a020ff43e307bf86409cff329
|
|
PiperOrigin-RevId: 225620490
Change-Id: Ia726107b3f58093a5f881634f90b071b32d2c269
|
|
PiperOrigin-RevId: 225424296
Change-Id: I60fcc2b859339dca9963cb32227a287e719ab765
|
|
PiperOrigin-RevId: 225421480
Change-Id: I1e9259b0b7e8490164e830b73338a615129c7f0e
|
|
Platform objects are not savable, storing references to them in
filesystem datastructures would cause save to fail if someone actually
passed in a Platform.
Current implementations work because everywhere a Platform is
expected, we currently pass in a Kernel object which embeds Platform
and thus satisfies the interface.
Eliminate this indirection and save pointers to Kernel directly.
PiperOrigin-RevId: 225288336
Change-Id: Ica399ff43f425e15bc150a0d7102196c3d54a2ab
|
|
PiperOrigin-RevId: 225240907
Change-Id: Ie568ce3cd643f3e4a0eaa0444f4ed589dcf6031f
|
|
This is necessary to implement file seals for memfds.
PiperOrigin-RevId: 225239394
Change-Id: Ib3f1ab31385afc4b24e96cd81a05ef1bebbcbb70
|
|
unshare actually takes a subset of clone flags, but has no unique flags,
so formatting as clone flags is close enough.
PiperOrigin-RevId: 225082774
Change-Id: I5b580f18607c7785f323e37809094115520a17c0
|
|
PiperOrigin-RevId: 225041520
Change-Id: Ib1afc693e592d308d60db82022c5b7743fd3c646
|
|
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I565214581eeb44045169da7f44d45a489082ac3a
PiperOrigin-RevId: 224938170
|
|
MSG_WAITALL requests that recv family calls do not perform short reads. It only
has an effect for SOCK_STREAM sockets, other types ignore it.
PiperOrigin-RevId: 224918540
Change-Id: Id97fbf972f1f7cbd4e08eec0138f8cbdf1c94fe7
|
|
PiperOrigin-RevId: 224864380
Change-Id: I49542279ad56bf15ba462d3de1ef2b157b31830a
|
|
arch_prctl already verified that the new FS_BASE was canonical, but
Task.Clone did not. Centralize these checks in the arch packages.
Failure to validate could cause an error in PTRACE_SET_REGS when we try
to switch to the app.
PiperOrigin-RevId: 224862398
Change-Id: Iefe63b3f9aa6c4810326b8936e501be3ec407f14
|
|
PiperOrigin-RevId: 224696233
Change-Id: I45c425d9e32adee5dcce29ca7439a06567b26014
|
|
PiperOrigin-RevId: 224600982
Change-Id: I547253528e24fb0bb318fc9d2632cb80504acb34
|
|
Sample:
I1206 14:24:56.768520 3700 x:0] [ 1] ioctl_test E rt_sigaction(SIGSEGV, 0x7ee6edb0c590 {Handler: 0x559c6d915cf0, Flags: SA_SIGINFO|SA_RESTORER|SA_ONSTACK|SA_NODEFER, Restorer: 0x2a9901a259a0, Mask: []}, 0x7ee6edb0c630)
I1206 14:24:56.768530 3700 x:0] [ 1] ioctl_test X rt_sigaction(SIGSEGV, 0x7ee6edb0c590 {Handler: 0x559c6d915cf0, Flags: SA_SIGINFO|SA_RESTORER|SA_ONSTACK|SA_NODEFER, Restorer: 0x2a9901a259a0, Mask: []}, 0x7ee6edb0c630 {Handler: SIG_DFL, Flags: 0x0, Restorer: 0x0, Mask: []}) = 0x0 (2.701?s)
PiperOrigin-RevId: 224596606
Change-Id: I3512493aed99d3d75600249263da46686b1dc0e7
|
|
PiperOrigin-RevId: 224553291
Change-Id: I35d0772c215b71f4319c23f22df5c61c908f8590
|
|
Sample:
I1205 16:51:49.869701 2492 x:0] [ 1] ioctl_test E rt_sigaction(SIGIO, 0x7e0e5b5e8500, 0x7e0e5b5e85a0)
I1205 16:51:49.869766 2492 x:0] [ 1] ioctl_test X rt_sigaction(SIGIO, 0x7e0e5b5e8500, 0x7e0e5b5e85a0) = 0x0 (44.336?s)
I1205 16:51:49.869831 2492 x:0] [ 1] ioctl_test E rt_sigprocmask(SIG_UNBLOCK, 0x7e0e5b5e8878 [SIGIO], 0x7e0e5b5e87c0, 0x8)
I1205 16:51:49.869866 2492 x:0] [ 1] ioctl_test X rt_sigprocmask(SIG_UNBLOCK, 0x7e0e5b5e8878 [SIGIO], 0x7e0e5b5e87c0 [SIGIO 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64], 0x8) = 0x0 (2.575?s)
PiperOrigin-RevId: 224422404
Change-Id: I3ed3f2ec6b1a639baa9cacd37ce7ee325c3703e4
|
|
Currently sending a broadcast packet (for DHCP, e.g.) requires a "default
route" of the format "0.0.0.0/0 via 0.0.0.0 <intf>". There is no good reason
for this and on devices with several ports this creates a rather akward route
table with lots of such default routes (which defeats the purpose of a default
route).
PiperOrigin-RevId: 224378769
Change-Id: Icd7ec8a206eb08083cff9a837f6f9ab231c73a19
|
|
Unlike FlagSet, order doesn't matter here, so it can simply be a map.
PiperOrigin-RevId: 224377910
Change-Id: I15810c698a7f02d8614bf09b59583ab73cba0514
|