summaryrefslogtreecommitdiffhomepage
path: root/pkg
AgeCommit message (Collapse)Author
2018-08-08Fix data race in unix.BoundEndpoint.UnidirectionalConnect.Ian Gudger
Data race is: Read: (*connectionlessEndpoint).UnidirectionalConnect: writeQueue: e.receiver.(*queueReceiver).readQueue, Write: (*connectionlessEndpoint).Close: e.receiver = nil The problem is that (*connectionlessEndpoint).UnidirectionalConnect assumed that baseEndpoint.receiver is immutable which is explicitly not the case. Fixing this required two changes: 1. Add synchronization around access of baseEndpoint.receiver in (*connectionlessEndpoint).UnidirectionalConnect. 2. Check for baseEndpoint.receiver being nil in (*connectionlessEndpoint).UnidirectionalConnect. PiperOrigin-RevId: 207984402 Change-Id: Icddeeb43805e777fa3ef874329fa704891d14181
2018-08-08Enable SACK in runscFabricio Voznika
SACK is disabled by default and needs to be manually enabled. It not only improves performance, but also fixes hangs downloading files from certain websites. PiperOrigin-RevId: 207906742 Change-Id: I4fb7277b67bfdf83ac8195f1b9c38265a0d51e8b
2018-08-07Hold TaskSet.mu in Task.Parent.Jamie Liu
PiperOrigin-RevId: 207766238 Change-Id: Id3b66d8fe1f44c3570f67fa5ae7ba16021e35be1
2018-08-07Adds support to dump out cubic internal state.Bhasker Hariharan
PiperOrigin-RevId: 207754087 Change-Id: I83abce64348ea93f8692da81a881b364dae2158b
2018-08-07fs: Add new cache policy "remote_revalidate".Nicolas Lacasse
This CL adds a new cache-policy for gofer filesystems that uses the host page cache, but causes dirents to be reloaded on each Walk, and does not cache readdir results. This policy is useful when the remote filesystem may change out from underneath us, as any remote changes will be reflected on the next Walk. Importantly, this cache policy is only consistent if we do not use gVisor's internal page cache, since that page cache is tied to the Inode and may be thrown away upon Revalidation. This cache policy should only be used when the gofer supports donating host FDs, since then gVisor will make use of the host kernel page cache, which will be consistent for all open files in the gofer. In fact, a panic will be raised if a file is opened without a donated FD. PiperOrigin-RevId: 207752937 Change-Id: I233cb78b4695bbe00a4605ae64080a47629329b8
2018-08-07sentry: make epoll.pollEntry wait for the file operation in restore.Zhaozhong Ni
PiperOrigin-RevId: 207737935 Change-Id: I3a301ece1f1d30909715f36562474e3248b6a0d5
2018-08-07Netstack doesn't handle sending after SHUT_WR correctly.Brian Geffon
PiperOrigin-RevId: 207715032 Change-Id: I7b6690074c5be283145192895d706a92e921b22c
2018-08-06Make ramfs.File savableMichael Pratt
In other news, apparently proc.fdInfo is the last user of ramfs.File. PiperOrigin-RevId: 207564572 Change-Id: I5a92515698cc89652b80bea9a32d309e14059869
2018-08-06Fix a bug in PCIDs.AssignShiruRen
Store the new assigned pcid in p.cache[pt]. Signed-off-by: ShiruRen <renshiru2000@gmail.com> Change-Id: I4aee4e06559e429fb5e90cb9fe28b36139e3b4b6 PiperOrigin-RevId: 207563833
2018-08-03Cubic implementation for Netstack.Bhasker Hariharan
This CL implements CUBIC as described in https://tools.ietf.org/html/rfc8312. PiperOrigin-RevId: 207353142 Change-Id: I329cbf3277f91127e99e488f07d906f6779c6603
2018-08-03stateify: make explicit mode no longer optional.Zhaozhong Ni
PiperOrigin-RevId: 207303405 Change-Id: I17b6433963d78e3631a862b7ac80f566c8e7d106
2018-08-02Copy creds in accessMichael Pratt
PiperOrigin-RevId: 207181631 Change-Id: Ic6205278715a9260fb970efb414fc758ea72c4c6
2018-08-02Update comment referenceMichael Pratt
PiperOrigin-RevId: 207180809 Change-Id: I08c264812919e81b2c56fdd4a9ef06924de8b52f
2018-08-02Automated rollback of changelist 207037226Zhaozhong Ni
PiperOrigin-RevId: 207125440 Change-Id: I6c572afb4d693ee72a0c458a988b0e96d191cd49
2018-08-02Add seccomp(2) support.Brian Geffon
Add support for the seccomp syscall and the flag SECCOMP_FILTER_FLAG_TSYNC. PiperOrigin-RevId: 207101507 Change-Id: I5eb8ba9d5ef71b0e683930a6429182726dc23175
2018-08-01Move stack clock to options structIan Gudger
PiperOrigin-RevId: 207039273 Change-Id: Ib8f55a6dc302052ab4a10ccd70b07f0d73b373df
2018-08-01Automated rollback of changelist 207007153Michael Pratt
PiperOrigin-RevId: 207037226 Change-Id: I8b5f1a056d4f3eab17846f2e0193bb737ecb5428
2018-08-01stateify: convert all packages to use explicit mode.Zhaozhong Ni
PiperOrigin-RevId: 207007153 Change-Id: Ifedf1cc3758dc18be16647a4ece9c840c1c636c9
2018-08-01New conditional for adding key/value pairs to maps.Brielle Broder
When adding MultiDeviceKeys and their values into MultiDevice maps, make sure the keys and values have not already been added. This ensures that preexisting key/value pairs are not overridden. PiperOrigin-RevId: 206942766 Change-Id: I9d85f38eb59ba59f0305e6614a52690608944981
2018-07-31proc: show file flags in fdinfoAndrei Vagin
Currently, there is an attempt to print FD flags, but they are not decoded into a number, so we see something like this: /criu # cat /proc/self/fdinfo/0 flags: {%!o(bool=000false)} Actually, fdinfo has to contain file flags. Change-Id: Idcbb7db908067447eb9ae6f2c3cfb861f2be1a97 PiperOrigin-RevId: 206794498
2018-07-30netstack: support disconnect-on-save option per fdbased link.Zhaozhong Ni
PiperOrigin-RevId: 206659972 Change-Id: I5e0e035f97743b6525ad36bed2c802791609beaf
2018-07-27Added the O_LARGEFILE flag.Justine Olshan
This flag will always be true for gVisor files. PiperOrigin-RevId: 206355963 Change-Id: I2f03d2412e2609042df43b06d1318cba674574d0
2018-07-27stateify: support explicit annotation mode; convert refs and stack packages.Zhaozhong Ni
We have been unnecessarily creating too many savable types implicitly. PiperOrigin-RevId: 206334201 Change-Id: Idc5a3a14bfb7ee125c4f2bb2b1c53164e46f29a8
2018-07-26Don't copy-up extended attributes that specifically configure a lower overlay.Nicolas Lacasse
When copying-up files from a lower fs to an upper, we also copy the extended attributes on the file. If there is a (nested) overlay inside the lower, some of these extended attributes configure the lower overlay, and should not be copied-up to the upper. In particular, whiteout attributes in the lower fs overlay should not be copied-up, since the upper fs may actually contain the file. PiperOrigin-RevId: 206236010 Change-Id: Ia0454ac7b99d0e11383f732a529cb195ed364062
2018-07-25Format openat flagsMichael Pratt
PiperOrigin-RevId: 206021774 Change-Id: I447b6c751c28a8d8d4d78468b756b6ad8c61e169
2018-07-24Typo fix.Kevin Krakauer
PiperOrigin-RevId: 205880843 Change-Id: If2272b25f08a18ebe9b6309a1032dd5cdaa59866
2018-07-23Refactor new reno congestion control logic out of sender.Bhasker Hariharan
This CL also puts the congestion control logic behind an interface so that we can easily swap it out for say CUBIC in the future. PiperOrigin-RevId: 205732848 Change-Id: I891cdfd17d4d126b658b5faa0c6bd6083187944b
2018-07-23Add KVM and overlay dimensions to container_testFabricio Voznika
PiperOrigin-RevId: 205714667 Change-Id: I317a2ca98ac3bdad97c4790fcc61b004757d99ef
2018-07-20Format getcwd pathMichael Pratt
PiperOrigin-RevId: 205440332 Change-Id: I2a838f363e079164c83da88e1b0b8769844fe79b
2018-07-19kernel: mutations on creds now require a copy.Adin Scannell
PiperOrigin-RevId: 205315612 Change-Id: I9a0a1e32c8abfb7467a38743b82449cc92830316
2018-07-19fs: Pass context to Revalidate() function.Nicolas Lacasse
The current revalidation logic is very simple and does not do much introspection of the dirent being revalidated (other than looking at the type of file). Fancier revalidation logic is coming soon, and we need to be able to look at the cached and uncached attributes of a given dirent, and we need a context to perform some of these operations. PiperOrigin-RevId: 205307351 Change-Id: If17ea1c631d8f9489c0e05a263e23d7a8a3bf159
2018-07-19ConfigureMMap on an overlay file delegates to the upper if there is no lower.Nicolas Lacasse
In the general case with an overlay, all mmap calls must go through the overlay, because in the event of a copy-up, the overlay needs to invalidate any previously-created mappings. If there if no lower file, however, there will never be a copy-up, so the overlay can delegate directly to the upper file in that case. This also allows us to correctly mmap /dev/zero when it is in an overlay. This file has special semantics which the overlay does not know about. In particular, it does not implement Mappable(), which (in the general case) the overlay uses to detect if a file is mappable or not. PiperOrigin-RevId: 205306743 Change-Id: I92331649aa648340ef6e65411c2b42c12fa69631
2018-07-19Add AT_UID, AT_EUID, AT_GID, AT_EGID to aux vector.Brian Geffon
With musl libc when these entries are missing from the aux vector it's forcing libc.secure (effectively AT_SECURE). This mode prevents RPATH and LD_LIBRARY_PATH from working. https://git.musl-libc.org/cgit/musl/tree/ldso/dynlink.c#n1488 As the first entry is a mask of all the aux fields set: https://git.musl-libc.org/cgit/musl/tree/ldso/dynlink.c#n187 PiperOrigin-RevId: 205284684 Change-Id: I04de7bab241043306b4f732306a81d74edfdff26
2018-07-19sentry: save stack in proc net dev.Zhaozhong Ni
PiperOrigin-RevId: 205253858 Change-Id: Iccdc493b66d1b4d39de44afb1184952183b1283f
2018-07-18Moved restore code out of create and made to be called after create.Justine Olshan
Docker expects containers to be created before they are restored. However, gVisor restoring requires specificactions regarding the kernel and the file system. These actions were originally in booting the sandbox. Now setting up the file system is deferred until a call to a call to runsc start. In the restore case, the kernel is destroyed and a new kernel is created in the same process, as we need the same process for Docker. These changes required careful execution of concurrent processes which required the use of a channel. Full docker integration still needs the ability to restore into the same container. PiperOrigin-RevId: 205161441 Change-Id: Ie1d2304ead7e06855319d5dc310678f701bd099f
2018-07-18Fix lock-ordering violation in Create by logging BaseName instead of FullName.Nicolas Lacasse
Dirent.FullName takes the global renameMu, but can be called during Create, which itself takes dirent.mu and dirent.dirMu, which is a lock-order violation: Dirent.Create d.dirMu.Lock d.mu.Lock Inode.Create gofer.inodeOperations.Create gofer.NewFile Dirent.FullName d.renameMu.RLock We only use the FullName here for logging, and in this case we can get by with logging only the BaseName. A `BaseName` method was added to Dirent, which simply returns the name, taking d.parent.mu as required. In the Create pathway, we can't call d.BaseName() because taking d.parent.mu after d.mu violates the lock order. But we already know the base name of the file we just created, so that's OK. In the Open/GetFile pathway, we are free to call d.BaseName() because the other dirent locks are not held. PiperOrigin-RevId: 205112278 Change-Id: Ib45c734081aecc9b225249a65fa8093eb4995f10
2018-07-17Merge FileMem.usage in IncRefMichael Pratt
Per the doc, usage must be kept maximally merged. Beyond that, it is simply a good idea to keep fragmentation in usage to a minimum. The glibc malloc allocator allocates one page at a time, potentially causing lots of fragmentation. However, those pages are likely to have the same number of references, often making it possible to merge ranges. PiperOrigin-RevId: 204960339 Change-Id: I03a050cf771c29a4f05b36eaf75b1a09c9465e14
2018-07-17Add API to decode 'stat.st_rdev' into major and minor numbers.Neel Natu
PiperOrigin-RevId: 204936533 Change-Id: Ib060920077fc914f97c4a0548a176d1368510c7b
2018-07-17netstack: update goroutine save / restore safety comments.Zhaozhong Ni
PiperOrigin-RevId: 204930314 Change-Id: Ifc4c41ed28616cd57fafbf7c92e87141a945c41f
2018-07-16Add CPUID faulting for ptrace and KVM.Adin Scannell
PiperOrigin-RevId: 204858314 Change-Id: I8252bf8de3232a7a27af51076139b585e73276d4
2018-07-16Start allocation and reclaim scans only where they may find a matchMichael Pratt
If usageSet is heavily fragmented, findUnallocatedRange and findReclaimable can spend excessive cycles linearly scanning the set for unallocated/free pages. Improve common cases by beginning the scan only at the first page that could possibly contain an unallocated/free page. This metadata only guarantees that there is no lower unallocated/free page, but a scan may still be required (especially for multi-page allocations). That said, this heuristic can still provide significant performance improvements for certain applications. PiperOrigin-RevId: 204841833 Change-Id: Ic41ad33bf9537ecd673a6f5852ab353bf63ea1e6
2018-07-16Add EventOperations.HostFD()Neel Natu
This method allows an eventfd inside the Sentry to be registered with with the host kernel. Update comment about memory mapping host fds via CachingInodeOperations. PiperOrigin-RevId: 204784859 Change-Id: I55823321e2d84c17ae0f7efaabc6b55b852ae257
2018-07-13Allow a filesystem to control its visibility in /proc/filesystems.Neel Natu
PiperOrigin-RevId: 204508520 Change-Id: I09e5f8b6e69413370e1a0d39dbb7dc1ee0b6192d
2018-07-13Note that Mount errors do not require translationsMichael Pratt
PiperOrigin-RevId: 204490639 Change-Id: I0fe26306bae9320c6aa4f854fe0ef25eebd93233
2018-07-12Fix aio eventfd lookupMichael Pratt
We're failing to set eventFile in the outer scope. PiperOrigin-RevId: 204392995 Change-Id: Ib9b04f839599ef552d7b5951d08223e2b1d5f6ad
2018-07-12sentry: wait for restore clock instead of panicing in Timekeeper.Zhaozhong Ni
PiperOrigin-RevId: 204372296 Change-Id: If1ed9843b93039806e0c65521f30177dc8036979
2018-07-12sentry: save inet stacks in proc files.Zhaozhong Ni
PiperOrigin-RevId: 204362791 Change-Id: If85ea7442741e299f0d7cddbc3d6b415e285da81
2018-07-12netstack: save tcp endpoint accepted channel directly.Zhaozhong Ni
PiperOrigin-RevId: 204356873 Change-Id: I5e2f885f58678e693aae1a69e8bf8084a685af28
2018-07-12netstack: do not defer panicable logic in tcp main loop.Zhaozhong Ni
PiperOrigin-RevId: 204355026 Change-Id: I1a8229879ea3b58aa861a4eb4456fd7aff99863d
2018-07-12Format documentationMichael Pratt
PiperOrigin-RevId: 204323728 Change-Id: I1ff9aa062ffa12583b2e38ec94c87db7a3711971
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 00:03:51 +0000