summaryrefslogtreecommitdiffhomepage
path: root/pkg
AgeCommit message (Collapse)Author
2019-10-07Rename epsocket to netstack.Kevin Krakauer
PiperOrigin-RevId: 273365058
2019-10-07Merge pull request #753 from lubinszARM:pr_syscall_linuxgVisor bot
PiperOrigin-RevId: 273364848
2019-10-04Add sanity check that overlayCreate is called with an overlay parent inode.Nicolas Lacasse
PiperOrigin-RevId: 272987037
2019-10-04Return EIO from p9 if flipcall.Endpoint.Connect() fails.Jamie Liu
Also ensure that all flipcall transport errors not returned by p9 (converted to EIO by the client, or dropped on the floor by channel server goroutines) are logged. PiperOrigin-RevId: 272963663
2019-10-04Change linux.FileMode from uint to uint16, and update VFS to use FileMode.Kevin Krakauer
In Linux (include/linux/types.h), mode_t is an unsigned short. PiperOrigin-RevId: 272956350
2019-10-03Implement proper local broadcast behaviorChris Kuiper
The behavior for sending and receiving local broadcast (255.255.255.255) traffic is as follows: Outgoing -------- * A broadcast packet sent on a socket that is bound to an interface goes out that interface * A broadcast packet sent on an unbound socket follows the route table to select the outgoing interface + if an explicit route entry exists for 255.255.255.255/32, use that one + else use the default route * Broadcast packets are looped back and delivered following the rules for incoming packets (see next). This is the same behavior as for multicast packets, except that it cannot be disabled via sockopt. Incoming -------- * Sockets wishing to receive broadcast packets must bind to either INADDR_ANY (0.0.0.0) or INADDR_BROADCAST (255.255.255.255). No other socket receives broadcast packets. * Broadcast packets are multiplexed to all sockets matching it. This is the same behavior as for multicast packets. * A socket can bind to 255.255.255.255:<port> and then receive its own broadcast packets sent to 255.255.255.255:<port> In addition, this change implicitly fixes an issue with multicast reception. If two sockets want to receive a given multicast stream and one is bound to ANY while the other is bound to the multicast address, only one of them will receive the traffic. PiperOrigin-RevId: 272792377
2019-10-03Merge pull request #757 from xiaobo55x:pkg_bitsgVisor bot
PiperOrigin-RevId: 272760964
2019-10-03Don't report partialResult errors from sendfileAndrei Vagin
The input file descriptor is always a regular file, so sendfile can't lose any data if it will not be able to write them to the output file descriptor. Reported-by: syzbot+22d22330a35fa1c02155@syzkaller.appspotmail.com PiperOrigin-RevId: 272730357
2019-10-02Merge pull request #865 from tanjianfeng:fix-829gVisor bot
PiperOrigin-RevId: 272522508
2019-10-02fs/proc: report PID-s from a pid namespace of the proc mountAndrei Vagin
Right now, we can find more than one process with the 1 PID in /proc. $ for i in `seq 10`; do > unshare -fp sleep 1000 & > done $ ls /proc 1 1 1 1 12 18 24 29 6 loadavg net sys version 1 1 1 1 16 20 26 32 cpuinfo meminfo self thread-self 1 1 1 1 17 21 28 36 filesystems mounts stat uptime PiperOrigin-RevId: 272506593
2019-10-02Merge branch 'master' into pr_syscall_linuxAndrei Vagin
2019-10-01Include AT_SECURE in the aux vectorMichael Pratt
gVisor does not currently implement the functionality that would result in AT_SECURE = 1, but Linux includes AT_SECURE = 0 in the normal case, so we should do the same. PiperOrigin-RevId: 272311488
2019-10-01Disable cpuClockTicker when app is idleMichael Pratt
Kernel.cpuClockTicker increments kernel.cpuClock, which tasks use as a clock to track their CPU usage. This improves latency in the syscall path by avoid expensive monotonic clock calls on every syscall entry/exit. However, this timer fires every 10ms. Thus, when all tasks are idle (i.e., blocked or stopped), this forces a sentry wakeup every 10ms, when we may otherwise be able to sleep until the next app-relevant event. These wakeups cause the sentry to utilize approximately 2% CPU when the application is otherwise idle. Updates to clock are not strictly necessary when the app is idle, as there are no readers of cpuClock. This commit reduces idle CPU by disabling the timer when tasks are completely idle, and computing its effects at the next wakeup. Rather than disabling the timer as soon as the app goes idle, we wait until the next tick, which provides a window for short sleeps to sleep and wakeup without doing the (relatively) expensive work of disabling and enabling the timer. PiperOrigin-RevId: 272265822
2019-10-01Honor X bit on extra anon pages in PT_LOAD segmentsMichael Pratt
Linux changed this behavior in 16e72e9b30986ee15f17fbb68189ca842c32af58 (v4.11). Previously, extra pages were always mapped RW. Now, those pages will be executable if the segment specified PF_X. They still must be writeable. PiperOrigin-RevId: 272256280
2019-09-30splice: try another fallback option only if the previous one isn't supportedAndrei Vagin
Reported-by: syzbot+bb5ed342be51d39b0cbb@syzkaller.appspotmail.com PiperOrigin-RevId: 272110815
2019-09-30splice: compare inode numbers only if both ends are pipesAndrei Vagin
It isn't allowed to splice data from and into the same pipe. But right now this check is broken, because we don't check that both ends are pipes. PiperOrigin-RevId: 272107022
2019-09-30Update FIXME bug with GitHub issue.Adin Scannell
PiperOrigin-RevId: 272101930
2019-09-30Add a Stringer implementation to PacketDispatchModeBhasker Hariharan
PiperOrigin-RevId: 272083936
2019-09-30Fix bugs in PickEphemeralPort for TCP.Bhasker Hariharan
Netstack always picks a random start point everytime PickEphemeralPort is called. While this is required for UDP so that DNS requests go out through a randomized set of ports it is not required for TCP. Infact Linux explicitly hashes the (srcip, dstip, dstport) and a one time secret initialized at start of the application to get a random offset. But to ensure it doesn't start from the same point on every scan it uses a static hint that is incremented by 2 in every call to pick ephemeral ports. The reason for 2 is Linux seems to split the port ranges where active connects seem to use even ones while odd ones are used by listening sockets. This CL implements a similar strategy where we use a hash + hint to generate the offset to start the search for a free Ephemeral port. This ensures that we cycle through the available port space in order for repeated connects to the same destination and significantly reduces the chance of picking a recently released port. PiperOrigin-RevId: 272058370
2019-09-30Force timestamps to update when set via InodeOperations.SetTimestamps.Nicolas Lacasse
The gofer's CachingInodeOperations implementation contains an optimization for the common open-read-close pattern when we have a host FD. In this case, the host kernel will update the timestamp for us to a reasonably close time, so we don't need an extra RPC to the gofer. However, when the app explicitly sets the timestamps (via futimes or similar) then we actually DO need to update the timestamps, because the host kernel won't do it for us. To fix this, a new boolean `forceSetTimestamps` was added to CachineInodeOperations.SetMaskedAttributes. It is only set by gofer.InodeOperations.SetTimestamps. PiperOrigin-RevId: 272048146
2019-09-30Only copy out remaining time on nanosleep successMichael Pratt
It looks like the old code attempted to do this, but didn't realize that err != nil even in the happy case. PiperOrigin-RevId: 272005887
2019-09-27Merge pull request #882 from DarcySail:darcy_faster_CopyStringIngVisor bot
PiperOrigin-RevId: 271675009
2019-09-27Merge pull request #864 from tanjianfeng:fix-861gVisor bot
PiperOrigin-RevId: 271649711
2019-09-27Implement SO_BINDTODEVICE sockoptgVisor bot
PiperOrigin-RevId: 271644926
2019-09-26Make raw socket tests pass in environments with or without CAP_NET_RAW.Kevin Krakauer
PiperOrigin-RevId: 271442321
2019-09-25Merge pull request #765 from trailofbits:uds_supportgVisor bot
PiperOrigin-RevId: 271235134
2019-09-25Remove centralized registration of protocols.Kevin Krakauer
Also removes the need for protocol names. PiperOrigin-RevId: 271186030
2019-09-25Merge pull request #863 from tanjianfeng:fix-862gVisor bot
PiperOrigin-RevId: 271168948
2019-09-24gvisor: change syscall.RawSyscall to syscall.RawSyscall6 where requiredgVisor bot
Before https://golang.org/cl/173160 syscall.RawSyscall would zero out the last three register arguments to the system call. That no longer happens. For system calls that take more than three arguments, use RawSyscall6 to ensure that we pass zero, not random data, for the additional arguments. PiperOrigin-RevId: 271062527
2019-09-24Stub out readahead implementation.Adin Scannell
Closes #261 PiperOrigin-RevId: 270973347
2019-09-24Return only primary addresses in Stack.NICInfo()Chris Kuiper
Non-primary addresses are used for endpoints created to accept multicast and broadcast packets, as well as "helper" endpoints (0.0.0.0) that allow sending packets when no proper address has been assigned yet (e.g., for DHCP). These addresses are not real addresses from a user point of view and should not be part of the NICInfo() value. Also see b/127321246 for more info. This switches NICInfo() to call a new NIC.PrimaryAddresses() function. To still allow an option to get all addresses (mostly for testing) I added Stack.GetAllAddresses() and NIC.AllAddresses(). In addition, the return value for GetMainNICAddress() was changed for the case where the NIC has no primary address. Instead of returning an error here, it now returns an empty AddressWithPrefix() value. The rational for this change is that it is a valid case for a NIC to have no primary addresses. Lastly, I refactored the code based on the new additions. PiperOrigin-RevId: 270971764
2019-09-24Simplify ICMPRateLimiterTamir Duberstein
https://github.com/golang/time/commit/c4c64ca added SetBurst upstream. PiperOrigin-RevId: 270925077
2019-09-24tty: fix sending SIGTTOU on tty writehenry.tjf
How to reproduce: $ echo "timeout 10 ls" > foo.sh $ chmod +x foo.sh $ ./foo.sh (will hang here for 10 secs, and the output of ls does not show) When "ls" process writes to stdout, it receives SIGTTOU signal, and hangs there. Until "timeout" process timeouts, and kills "ls" process. The expected result is: "ls" writes its output into tty, and terminates immdedately, then "timeout" process receives SIGCHLD and terminates. The reason for this failure is that we missed the check for TOSTOP (if set, background processes will receive the SIGTTOU signal when they do write). We use drivers/tty/n_tty.c:n_tty_write() as a reference. Fixes: #862 Reported-by: chris.zn <chris.zn@antfin.com> Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com> Signed-off-by: chenglang.hy <chenglang.hy@antfin.com>
2019-09-24Enable pkg/bits support on arm64.Haibo Xu
Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I490716f0e6204f0b3a43f71931b10d1ca541e128
2019-09-23Add test for concurrent reads and writes.Adin Scannell
PiperOrigin-RevId: 270789146
2019-09-23netstack: convert more socket options to {Set,Get}SockOptIntAndrei Vagin
PiperOrigin-RevId: 270763208
2019-09-23internal BUILD file cleanup.gVisor bot
PiperOrigin-RevId: 270680704
2019-09-20Change vfs.Dirent.Off to NextOff.Jamie Liu
"d_off is the distance from the start of the directory to the start of the next linux_dirent." - getdents(2). PiperOrigin-RevId: 270349685
2019-09-20Allow waiting for LinkEndpoint worker goroutines to finish.Ian Gudger
Previously, the only safe way to use an fdbased endpoint was to leak the FD. This change makes it possible to safely close the FD. This is the first step towards having stoppable stacks. Updates #837 PiperOrigin-RevId: 270346582
2019-09-20fix set hostnameJianfeng Tan
Previously, when we set hostname: $ strace hostname abc ... sethostname("abc", 3) = -1 ENAMETOOLONG (File name too long) ... According to man 2 sethostname: "The len argument specifies the number of bytes in name. (Thus, name does not require a terminating null byte.)" We wrongly use the CopyStringIn() to check terminating zero byte in the implementation of sethostname syscall. To fix this, we use CopyInBytes() instead. Fixes: #861 Reported-by: chenglang.hy <chenglang.hy@antfin.com> Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
2019-09-20Implement /proc/net/tcp6Jianfeng Tan
Fixes: #829 Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com> Signed-off-by: Jielong Zhou <jielong.zjl@antfin.com>
2019-09-19Fix p9 integration of flipcall.Jamie Liu
- Do not call Rread.SetPayload(flipcall packet window) in p9.channel.recv(). - Ignore EINTR from ppoll() in p9.Client.watch(). - Clean up handling of client socket FD lifetimes so that p9.Client.watch() never ppoll()s a closed FD. - Make p9test.Harness.Finish() call clientSocket.Shutdown() instead of clientSocket.Close() for the same reason. - Rework channel reuse to avoid leaking channels in the following case (suppose we have two channels): sendRecvChannel len(channels) == 2 => idx = 1 inuse[1] = ch0 sendRecvChannel len(channels) == 1 => idx = 0 inuse[0] = ch1 inuse[1] = nil sendRecvChannel len(channels) == 1 => idx = 0 inuse[0] = ch0 inuse[0] = nil inuse[0] == nil => ch0 leaked - Avoid deadlocking p9.Client.watch() by calling channelsWg.Wait() without holding channelsMu. - Bump p9test:client_test size to medium. PiperOrigin-RevId: 270200314
2019-09-19Fix documentation, clean up seccomp filter installation, rename helpers.Robert Tonic
Filter installation has been streamlined and functions renamed. Documentation has been fixed to be standards compliant, and missing documentation added. gofmt has also been applied to modified files.
2019-09-19Remove defer from hot path and ensure Atomic is applied consistently.Adin Scannell
PiperOrigin-RevId: 270114317
2019-09-19Merge pull request #876 from xiaobo55x:hostcpugVisor bot
PiperOrigin-RevId: 270094324
2019-09-19Job control: controlling TTYs and foreground process groups.Kevin Krakauer
Adresses a deadlock with the rolled back change: https://github.com/google/gvisor/commit/b6a5b950d28e0b474fdad160b88bc15314cf9259 Creating a session from an orphaned process group was causing a lock to be acquired twice by a single goroutine. This behavior is addressed, and a test (OrphanRegression) has been added to pty.cc. Implemented the following ioctls: - TIOCSCTTY - set controlling TTY - TIOCNOTTY - remove controlling tty, maybe signal some other processes - TIOCGPGRP - get foreground process group. Also enables tcgetpgrp(). - TIOCSPGRP - set foreground process group. Also enabled tcsetpgrp(). Next steps are to actually turn terminal-generated control characters (e.g. C^c) into signals to the proper process groups, and to send SIGTTOU and SIGTTIN when appropriate. PiperOrigin-RevId: 270088599
2019-09-19Accelerate byte lookup in string with `bytealg/indexbyte`Hang Su
`bytealg/indexbyte` will use AVX or SSE instruction set, if possible, which could accelerate `CopyStringIn` function by 28%. In worst case(CPU doesn't support SSE), `bytealg/indexbyte` will degenerate to traversal lookup. When dealing with short strings, `bytealg/indexbyte` has the same performance level as before. Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com> Signed-off-by: Hang Su <darcy.sh@antfin.com>
2019-09-18Enable pkg/sentry/hostcpu support on arm64.Haibo Xu
Signed-off-by: Haibo Xu haibo.xu@arm.com Change-Id: I333872da9bdf56ddfa8ab2f034dfc1f36a7d3132
2019-09-18Signalfd supportAdin Scannell
Note that the exact semantics for these signalfds are slightly different from Linux. These signalfds are bound to the process at creation time. Reads, polls, etc. are all associated with signals directed at that task. In Linux, all signalfd operations are associated with current, regardless of where the signalfd originated. In practice, this should not be an issue given how signalfds are used. In order to fix this however, we will need to plumb the context through all the event APIs. This gets complicated really quickly, because the waiter APIs are all netstack-specific, and not generally exposed to the context. Probably not worthwhile fixing immediately. PiperOrigin-RevId: 269901749
2019-09-18enable syscalls/linux to support arm64Bin Lu
Signed-off-by: Bin Lu <bin.lu@arm.com> Change-Id: I45af8a54304f8bb0e248ab15f4e20b173ea9e430
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 17:29:10 +0000