Age | Commit message (Collapse) | Author |
|
Updates #173,#6
Fixes #2888
PiperOrigin-RevId: 317087652
|
|
When a tcp.timer or tcpip.Route is no longer used, clean up its
resources so that unused memory may be released.
PiperOrigin-RevId: 317046582
|
|
Updates #1035, #1199
PiperOrigin-RevId: 317028108
|
|
Separate mount configuration from links and move it to
RunOpts, like the other options.
PiperOrigin-RevId: 317010158
|
|
... to help reduce flakes.
When waiting for an event to occur, use a timeout of 10s. When waiting
for an event to not occur, use a timeout of 1s.
Test: Ran test locally w/ run count of 1000 with and without gotsan.
PiperOrigin-RevId: 316998128
|
|
PiperOrigin-RevId: 316973783
|
|
Updates #2972
PiperOrigin-RevId: 316942245
|
|
Simplify the canMap check. We do not have plans to allow mmap for anything
beyond regular files, so we can just inline canMap() as a simple file mode
check.
Updates #1672.
PiperOrigin-RevId: 316929654
|
|
Ensure that CurrentConnected stat is updated on any errors and cleanups
during connected state processing.
Fixes #2968
PiperOrigin-RevId: 316919426
|
|
- Change FileDescriptionImpl Lock/UnlockPOSIX signature to
take {start,length,whence}, so the correct offset can be
calculated in the implementations.
- Create PosixLocker interface to make it possible to share
the same locking code from different implementations.
Closes #1480
PiperOrigin-RevId: 316910286
|
|
PiperOrigin-RevId: 316778032
|
|
PiperOrigin-RevId: 316767969
|
|
In order to make sure all aio goroutines have stopped during S/R, a new
WaitGroup was added to TaskSet, analagous to runningGoroutines. This WaitGroup
is incremented with each aio goroutine, and waited on during kernel.Pause.
The old VFS1 aio code was changed to use this new WaitGroup, rather than
fs.Async. The only uses of fs.Async are now inode and mount Release operations,
which do not call fs.Async recursively. This fixes a lock-ordering violation
that can cause deadlocks.
Updates #1035.
PiperOrigin-RevId: 316689380
|
|
PiperOrigin-RevId: 316627764
|
|
In passive open cases, we transition to Established state after
initializing endpoint's sender and receiver. With this we lose out
on any updates coming from the ACK that completes the handshake.
This change ensures that we uniformly transition to Established in all
cases and does minor cleanups.
Fixes #2938
PiperOrigin-RevId: 316567014
|
|
I am not really sure what the point of this is, but someone filed a bug about
it, so I assume something relies on it.
PiperOrigin-RevId: 316225127
|
|
PiperOrigin-RevId: 316148074
|
|
Fixes #701
PiperOrigin-RevId: 316025635
|
|
Major differences from existing overlay filesystems:
- Linux allows lower layers in an overlay to require revalidation, but not the
upper layer. VFS1 allows the upper layer in an overlay to require
revalidation, but not the lower layer. VFS2 does not allow any layers to
require revalidation. (Now that vfs.MkdirOptions.ForSyntheticMountpoint
exists, no uses of overlay in VFS1 are believed to require upper layer
revalidation; in particular, the requirement that the upper layer support the
creation of "trusted." extended attributes for whiteouts effectively required
the upper filesystem to be tmpfs in most cases.)
- Like VFS1, but unlike Linux, VFS2 overlay does not attempt to make mutations
of the upper layer atomic using a working directory and features like
RENAME_WHITEOUT. (This may change in the future, since not having a working
directory makes error recovery for some operations, e.g. rmdir, particularly
painful.)
- Like Linux, but unlike VFS1, VFS2 represents whiteouts using character
devices with rdev == 0; the equivalent of the whiteout attribute on
directories is xattr trusted.overlay.opaque = "y"; and there is no equivalent
to the whiteout attribute on non-directories since non-directories are never
merged with lower layers.
- Device and inode numbers work as follows:
- In Linux, modulo the xino feature and a special case for when all layers
are the same filesystem:
- Directories use the overlay filesystem's device number and an
ephemeral inode number assigned by the overlay.
- Non-directories that have been copied up use the device and inode
number assigned by the upper filesystem.
- Non-directories that have not been copied up use a per-(overlay,
layer)-pair device number and the inode number assigned by the lower
filesystem.
- In VFS1, device and inode numbers always come from the lower layer unless
"whited out"; this has the adverse effect of requiring interaction with
the lower filesystem even for non-directory files that exist on the upper
layer.
- In VFS2, device and inode numbers are assigned as in Linux, except that
xino and the samefs special case are not supported.
- Like Linux, but unlike VFS1, VFS2 does not attempt to maintain memory mapping
coherence across copy-up. (This may have to change in the future, as users
may be dependent on this property.)
- Like Linux, but unlike VFS1, VFS2 uses the overlayfs mounter's credentials
when interacting with the overlay's layers, rather than the caller's.
- Like Linux, but unlike VFS1, VFS2 permits multiple lower layers in an
overlay.
- Like Linux, but unlike VFS1, VFS2's overlay filesystem is
application-mountable.
Updates #1199
PiperOrigin-RevId: 316019067
|
|
Tentative addresses should not be used when finding a route. This change
fixes a bug where a tentative address may have been used.
Test: stack_test.TestDADResolve
PiperOrigin-RevId: 315997624
|
|
PiperOrigin-RevId: 315991648
|
|
During inititalization inode struct was copied around, but
it isn't great pratice to copy it around since it contains
ref count and sync.Mutex.
Updates #1480
PiperOrigin-RevId: 315983788
|
|
A method is added to generate a merkle tree for data, and store the
generated tree in the output.
PiperOrigin-RevId: 315966571
|
|
PiperOrigin-RevId: 315959279
|
|
This change creates a merkletree package which will be used in the future
for an implementation of file system API.
PiperOrigin-RevId: 315952451
|
|
On UDP sockets, SO_REUSEADDR allows multiple sockets to bind to the same
address, but only delivers packets to the most recently bound socket. This
differs from the behavior of SO_REUSEADDR on TCP sockets. SO_REUSEADDR for TCP
sockets will likely need an almost completely independent implementation.
SO_REUSEADDR has some odd interactions with the similar SO_REUSEPORT. These
interactions are tested fairly extensively and all but one particularly odd
one (that honestly seems like a bug) behave the same on gVisor and Linux.
PiperOrigin-RevId: 315844832
|
|
doAction()->log.TracebackAll() will append a colon.
PiperOrigin-RevId: 315842611
|
|
When I do high-performance networking,
the value of wmem_max is often set very high,
specially for 10/25/50 Gigabit NIC.
I think maybe this restriction is not suitable.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
PiperOrigin-RevId: 315812219
|
|
gaurav1086:sentry_kernel_timekeeper_use_buffered_channel
PiperOrigin-RevId: 315803553
|
|
TCP_KEEPCNT is used to set the maximum keepalive probes to be
sent before dropping the connection.
WANT_LGTM=jchacon
PiperOrigin-RevId: 315758094
|
|
In case of SOCK_SEQPACKET, it has to be ignored.
In case of SOCK_STREAM, EISCONN or EOPNOTSUPP has to be returned.
PiperOrigin-RevId: 315755972
|
|
PiperOrigin-RevId: 315745386
|
|
PiperOrigin-RevId: 315734425
|
|
Minimum header sizes are already checked in each `case` arm below. Worse, the
ICMP entries in transportProtocolMinSizes are incorrect, and produce false "raw
packet" logs.
PiperOrigin-RevId: 315730073
|
|
PiperOrigin-RevId: 315711208
|
|
Closes #1623
PiperOrigin-RevId: 315681993
|
|
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
|
|
LockFD is the generic implementation that can be embedded in
FileDescriptionImpl implementations. Unique lock ID is
maintained in vfs.FileDescription and is created on demand.
Updates #1480
PiperOrigin-RevId: 315604825
|
|
PiperOrigin-RevId: 315599736
|
|
PiperOrigin-RevId: 315595602
|
|
After this change e.mu is only promoted to exclusively locked during
route.Resolve. It downgrades back to read-lock afterwards.
This prevents the second RLock() call gets stuck later in the stack.
https://syzkaller.appspot.com/bug?id=065b893bd8d1d04a4e0a1d53c578537cde1efe99
Syzkaller logs does not contain interesting stack traces.
The following stack trace is obtained by running repro locally.
goroutine 53 [semacquire, 3 minutes]:
runtime.gopark(0xfd4278, 0x1896320, 0xc000301912, 0x4)
GOROOT/src/runtime/proc.go:304 +0xe0 fp=0xc0000e25f8 sp=0xc0000e25d8 pc=0x437170
runtime.goparkunlock(...)
GOROOT/src/runtime/proc.go:310
runtime.semacquire1(0xc0001220b0, 0xc00000a300, 0x1, 0x0)
GOROOT/src/runtime/sema.go:144 +0x1c0 fp=0xc0000e2660 sp=0xc0000e25f8 pc=0x4484e0
sync.runtime_Semacquire(0xc0001220b0)
GOROOT/src/runtime/sema.go:56 +0x42 fp=0xc0000e2690 sp=0xc0000e2660 pc=0x448132
gvisor.dev/gvisor/pkg/sync.(*RWMutex).RLock(...)
pkg/sync/rwmutex_unsafe.go:76
gvisor.dev/gvisor/pkg/tcpip/transport/udp.(*endpoint).HandleControlPacket(0xc000122000, 0x7ee5, 0xc00053c16c, 0x4, 0x5e21, 0xc00053c224, 0x4, 0x1, 0x0, 0xc00007ed00)
pkg/tcpip/transport/udp/endpoint.go:1345 +0x169 fp=0xc0000e26d8 sp=0xc0000e2690 pc=0x9843f9
......
gvisor.dev/gvisor/pkg/tcpip/transport/udp.(*protocol).HandleUnknownDestinationPacket(0x18bb5a0, 0xc000556540, 0x5e21, 0xc00053c16c, 0x4, 0x7ee5, 0xc00053c1ec, 0x4, 0xc00007e680, 0x4)
pkg/tcpip/transport/udp/protocol.go:143 +0xb9a fp=0xc0000e8260 sp=0xc0000e7510 pc=0x9859ba
......
gvisor.dev/gvisor/pkg/tcpip/transport/udp.sendUDP(0xc0001220d0, 0xc00053ece0, 0x1, 0x1, 0x883, 0x1405e217ee5, 0x11100a0, 0xc000592000, 0xf88780)
pkg/tcpip/transport/udp/endpoint.go:924 +0x3b0 fp=0xc0000ed390 sp=0xc0000ec750 pc=0x981af0
gvisor.dev/gvisor/pkg/tcpip/transport/udp.(*endpoint).write(0xc000122000, 0x11104e0, 0xc00020a460, 0x0, 0x0, 0x0, 0x0, 0x0)
pkg/tcpip/transport/udp/endpoint.go:510 +0x4ad fp=0xc0000ed658 sp=0xc0000ed390 pc=0x97f2dd
PiperOrigin-RevId: 315590041
|
|
When the file closes, it attempts to write dirty cached
attributes to the file. This should not be done when the
mount is readonly.
PiperOrigin-RevId: 315585058
|
|
NDP packets are sent periodically from NDP timers. These timers do not
hold the NIC lock when sending packets as the packet write operation
may take some time. While the lock is not held, the NIC may be removed
by some other goroutine. This change handles that scenario gracefully.
Test: stack_test.TestRemoveNICWhileHandlingRSTimer
PiperOrigin-RevId: 315524143
|
|
findAvailableLocked() may return a non-aligned FileRange.End after expansion
since it may round FileRange.Start down to a hugepage boundary.
PiperOrigin-RevId: 315520321
|
|
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
We need to initialize an empty fp state area for the sentry.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
Run vs. exec, VFS1 vs. VFS2 were executable lookup were
slightly different from each other. Combine them all
into the same logic.
PiperOrigin-RevId: 315426443
|
|
As in VFS1, the mode, uid, and gid options are supported.
Updates #1197
PiperOrigin-RevId: 315340510
|
|
Netstack has traditionally parsed headers on-demand as a packet moves up the
stack. This is conceptually simple and convenient, but incompatible with
iptables, where headers can be inspected and mangled before even a routing
decision is made.
This changes header parsing to happen early in the incoming packet path, as soon
as the NIC gets the packet from a link endpoint. Even if an invalid packet is
found (e.g. a TCP header of insufficient length), the packet is passed up the
stack for proper stats bookkeeping.
PiperOrigin-RevId: 315179302
|