Age | Commit message (Collapse) | Author |
|
If the NIC has a valid IPv6 address assigned, use it as the
source address for outgoing NDP Router Solicitation packets.
Test: stack_test.TestRouterSolicitation
PiperOrigin-RevId: 299398763
|
|
Useful for logs to print the string representation of the value
instead of the integer value.
PiperOrigin-RevId: 299356847
|
|
Adds an oom_score_adj and oom_score proc file stub. oom_score_adj accepts
writes of values -1000 to 1000 and persists the value with the task. New tasks
inherit the parent's oom_score_adj.
oom_score is a read-only stub that always returns the value '0'.
Issue #202
PiperOrigin-RevId: 299245355
|
|
PiperOrigin-RevId: 299238067
|
|
PiperOrigin-RevId: 299233818
|
|
By putting slices into the pool, the slice header escapes. This can be avoided
by not putting the slice header into the pool.
This removes an allocation from the TCP segment send path.
PiperOrigin-RevId: 299215480
|
|
A parser of test results doesn't expect to see any extra messages.
PiperOrigin-RevId: 298966577
|
|
PiperOrigin-RevId: 298941855
|
|
gofer.dentryReadWriter.WriteFromBlocks was not updating
gofer.dentry.size after a write operation that skips the
cache.
Updates #1198
PiperOrigin-RevId: 298708646
|
|
Properly discard segments from the segment heap.
PiperOrigin-RevId: 298704074
|
|
The support of PTRACE_SYSEMU on arm64 was added in the 5.3 kernel,
so we can be sure that the current version is higher that 5.3.
And this change moves vsyscall seccomp rules to the arch specific file,
because vsyscall isn't supported on arm64.
PiperOrigin-RevId: 298696493
|
|
PiperOrigin-RevId: 298690552
|
|
Ensures that all access to TransportEndpointInfo.ID is either:
* In a function ending in a Locked suffix.
* While holding the appropriate mutex.
This primary affects the checkV4Mapped method on affected endpoints, which has
been renamed to checkV4MappedLocked. Also document the method and change its
argument to be a value instead of a pointer which had caused some awkwardness.
This race was possible in the udp and icmp endpoints between Connect and uses
of TransportEndpointInfo.ID including in both itself and Bind.
The tcp endpoint did not suffer from this bug, but benefited from better
documentation.
Updates #357
PiperOrigin-RevId: 298682913
|
|
PiperOrigin-RevId: 298476533
|
|
PiperOrigin-RevId: 298451319
|
|
A deadlock may occur if a write lock on a RWMutex is blocked between
nested read lock attempts as the inner read lock attempt will be
blocked in this scenario.
Example (T1 and T2 are differnt goroutines):
T1: obtain read-lock
T2: attempt write-lock (blocks)
T1: attempt inner/nested read-lock (blocks)
Here we can see that T1 and T2 are deadlocked.
Tests: Existing tests pass.
PiperOrigin-RevId: 298426678
|
|
PiperOrigin-RevId: 298405064
|
|
DATA RACE in netstack.(*SocketOperations).fetchReadView
Write at 0x00c001dca138 by goroutine 1001:
gvisor.dev/gvisor/pkg/sentry/socket/netstack.(*SocketOperations).fetchReadView()
pkg/sentry/socket/netstack/netstack.go:418 +0x85
gvisor.dev/gvisor/pkg/sentry/socket/netstack.(*SocketOperations).coalescingRead()
pkg/sentry/socket/netstack/netstack.go:2309 +0x67
gvisor.dev/gvisor/pkg/sentry/socket/netstack.(*SocketOperations).nonBlockingRead()
pkg/sentry/socket/netstack/netstack.go:2378 +0x183d
Previous read at 0x00c001dca138 by goroutine 1111:
gvisor.dev/gvisor/pkg/sentry/socket/netstack.(*SocketOperations).Ioctl()
pkg/sentry/socket/netstack/netstack.go:2666 +0x533
gvisor.dev/gvisor/pkg/sentry/syscalls/linux.Ioctl()
Reported-by: syzbot+d4c3885fcc346f08deb6@syzkaller.appspotmail.com
PiperOrigin-RevId: 298387377
|
|
PiperOrigin-RevId: 298380654
|
|
PiperOrigin-RevId: 297982488
|
|
This is needed for syzkaller to proper classify issues.
Right now, all watchdog issues are duped to one with the
subject "panic: Sentry detected stuck task(s). See stack
trace and message above for more details".
PiperOrigin-RevId: 297975363
|
|
There is no cpuid instruction on arm64, so we need to defined it
just to avoid a compile time error.
Signed-off-by: Andrei Vagin <avagin@gmail.com>
|
|
Signed-off-by: Andrei Vagin <avagin@gmail.com>
|
|
A follow-up change will convert the networking code to use this standard
pipe implementation.
PiperOrigin-RevId: 297903206
|
|
/dev/net/tun does not currently work with hostinet. This has caused some
program starts failing because it thinks the feature exists.
PiperOrigin-RevId: 297876196
|
|
We changed syscalls to allow dup3 for ARM64.
Updates #1198
PiperOrigin-RevId: 297870816
|
|
Call stack.Close on stacks when we are done with them in tcp_test. This avoids
leaking resources and reduces the test's flakiness when race/gotsan is enabled.
It also provides test coverage for the race also fixed in this change, which
can be reliably triggered with the stack.Close change (and without the other
changes) when race/gotsan is enabled.
The race was possible when calling Abort (via stack.Close) on an endpoint
processing a SYN segment as part of a passive connect.
Updates #1564
PiperOrigin-RevId: 297685432
|
|
PiperOrigin-RevId: 297674924
|
|
PiperOrigin-RevId: 297638665
|
|
PiperOrigin-RevId: 297494373
|
|
PiperOrigin-RevId: 297492004
|
|
|
|
Analogous to Linux's kern_mount().
PiperOrigin-RevId: 297259580
|
|
MayDelete must lock the directory also, otherwise concurrent renames may
race. Note that this also changes the methods to be aligned with the actual
Remove and RemoveDirectory methods to minimize confusion when reading the
code. (It was hard to see that resolution was correct.)
PiperOrigin-RevId: 297258304
|
|
PiperOrigin-RevId: 297230721
|
|
PiperOrigin-RevId: 297220008
|
|
Tests:
- header_test.TestIsV6LinkLocalMulticastAddress
- header_test.TestScopeForIPv6Address
- stack_test.TestIPv6SourceAddressSelectionScopeAndSameAddress
PiperOrigin-RevId: 297215576
|
|
PiperOrigin-RevId: 297192390
|
|
PiperOrigin-RevId: 297191168
|
|
pipe and pipe2 aren't ported, pending a slight rework of pipe FDs for VFS2.
mount and umount2 aren't ported out of temporary laziness. access and faccessat
need additional FSImpl methods to implement properly, but are stubbed to
prevent googletest from CHECK-failing. Other syscalls require additional
plumbing.
Updates #1623
PiperOrigin-RevId: 297188448
|
|
PiperOrigin-RevId: 297175316
|
|
Fixes #1049
PiperOrigin-RevId: 297175164
|
|
Each mount is holds a reference on a root Dirent, but the mount itself may
live beyond it's own reference. This means that a call to Root() can come
after the associated reference has been dropped.
Instead of introducing a separate layer of references for mount objects,
we simply change the Root() method to use TryIncRef() and allow it to return
nil if the mount is already gone. This requires updating a small number of
callers and minimizes the change (since VFSv2 will replace this code shortly).
PiperOrigin-RevId: 297174230
|
|
TestCurrentConnectedIncrement fails consistently under gotsan due to the sleep
to check metrics is exactly the same as the TIME-WAIT duration. Under gotsan
things can be slow enough that the increment test is done before the protocol
goroutine is run after the TIME-WAIT timer expires and does its cleanup.
Increasing the sleep from 1s to 1.2s makes the test pass consistently.
PiperOrigin-RevId: 297160181
|
|
Protocol dispatchers were previously leaked. Bypassing TIME_WAIT is required to
test this change.
Also fix a race when a socket in SYN-RCVD is closed. This is also required to
test this change.
PiperOrigin-RevId: 296922548
|
|
PiperOrigin-RevId: 296526279
|
|
Tests: stack_test.TestAttachToLinkEndpointImmediately
PiperOrigin-RevId: 296474068
|
|
Test: stack_test.TestRouterSolicitation
PiperOrigin-RevId: 296454766
|
|
TCP/IP will work with netstack networking. hostinet doesn't work, and sockets
will have the same behavior as it is now.
Before the userspace is able to create device, the default loopback device can
be used to test.
/proc/net and /sys/net will still be connected to the root network stack; this
is the same behavior now.
Issue #1833
PiperOrigin-RevId: 296309389
|
|
- Disabled NICs will have their associated NDP state cleared.
- Disabled NICs will not accept incoming packets.
- Writes through a Route with a disabled NIC will return an invalid
endpoint state error.
- stack.Stack.FindRoute will not return a route with a disabled NIC.
- NIC's Running flag will report the NIC's enabled status.
Tests:
- stack_test.TestDisableUnknownNIC
- stack_test.TestDisabledNICsNICInfoAndCheckNIC
- stack_test.TestRoutesWithDisabledNIC
- stack_test.TestRouteWritePacketWithDisabledNIC
- stack_test.TestStopStartSolicitingRouters
- stack_test.TestCleanupNDPState
- stack_test.TestAddRemoveIPv4BroadcastAddressOnNICEnableDisable
- stack_test.TestJoinLeaveAllNodesMulticastOnNICEnableDisable
PiperOrigin-RevId: 296298588
|