Age | Commit message (Collapse) | Author |
|
Signed-off-by: Ruidong Cao <crdfrank@gmail.com>
Change-Id: I03f8ab25cf29257b31f145cf43304525a93f3300
PiperOrigin-RevId: 235763203
|
|
PiperOrigin-RevId: 235735865
Change-Id: I84223eb18eb51da1fa9768feaae80387ff6bfed0
|
|
An earlier CL excessively minimizes the period in which it
holds a lock on NIC. This earlier CL had done this out of
the mistaken impression it fixed a broken test, when in
fact it just reduced the rate of failure of a flaky test
in tcp_test.go. This new change holds the lock on NIC
for the duration of the loop over n.endpoints.
PiperOrigin-RevId: 235732487
Change-Id: I53ee6df264f093ddc4d29e9acdcba6b4838cb112
|
|
This change does not make use of SACK information but adds support to track
SACK information and store it in the endpoint.
The actual SACK based recovery will be in a separate CL.
Part of commits to add RFC 6675 support to Netstack.
PiperOrigin-RevId: 235612264
Change-Id: I261f94844d7bad5abda803152ce6cc6125a467ff
|
|
PiperOrigin-RevId: 235587729
Change-Id: I37074416b10a30ca3a00d11bcde338d8d979beaf
|
|
PiperOrigin-RevId: 235578698
Change-Id: I608ff5e25eac97f6e1bda058511c1f82b0e3b736
|
|
cl/234850781 introduced a race condition in NIC.DeliverNetworkPacket
by failing to hold a lock. This change fixes this regressesion by acquiring
a read lock before iterating through n.endpoints, and then releasing the lock
once iteration is complete.
PiperOrigin-RevId: 235549770
Change-Id: Ib0133288be512d478cf759c3314dc95ec3205d4b
|
|
PiperOrigin-RevId: 235447861
Change-Id: Ic6ba5e0ed89f1b85651da084be70ef8d0ffc13cf
|
|
PiperOrigin-RevId: 235248572
Change-Id: I5b0538b6feb365a98712c2a2d56d856fe80a8a09
|
|
PiperOrigin-RevId: 235053594
Change-Id: Ie3d7b11843d0710184a2463886c7034e8f5305d1
|
|
PiperOrigin-RevId: 234892473
Change-Id: Ie568c67d299082a008a1cf9802942e5e03746501
|
|
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I9751f859332d433ca772d6b9733f5a5a64398ec7
PiperOrigin-RevId: 234877624
|
|
This change adds support for the SO_BROADCAST socket option in gVisor Netstack.
This support includes getsockopt()/setsockopt() functionality for both UDP and
TCP endpoints (the latter being a NOOP), dispatching broadcast messages up and
down the stack, and route finding/creation for broadcast packets. Finally, a
suite of tests have been implemented, exercising this functionality through the
Linux syscall API.
PiperOrigin-RevId: 234850781
Change-Id: If3e666666917d39f55083741c78314a06defb26c
|
|
tcp_proxy now uses an AF_PACKET socket as the FD for netstack link layer
endpoint instead of a tap device. It also changes the link layer endpoint to use
PacketMMap dispatch instead of Readv. This reduces overall cpu and reflects the
current runsc setup which uses PacketMMap and also uses veth devices to receive
packets.
Also fixed a bug in gonet where Read() was not doing coalescing read and would
read small amounts at a time.
PiperOrigin-RevId: 234714768
Change-Id: Idabf8e600e4512489d3ba441c4096dc74deba5d7
|
|
Ping sometimes uses this instead of SO_TIMESTAMP.
PiperOrigin-RevId: 234699590
Change-Id: Ibec9c34fa0d443a931557a2b1b1ecd83effe7765
|
|
910448bbed066ab1082b510eef1ae61bb792d854 ("perf/x86/amd/uncore: Rename
cpufeatures macro for cache counters") in 4.14 changed the name.
We change both the internal and cpuinfo name. As the upstream commit
states, "In Family 17h, L3 is the last level cache as opposed to L2 in
previous families. Avoid this name confusion ..."
PiperOrigin-RevId: 234698034
Change-Id: Ibf2efd4c0b83c1a8b5bb123da65ea1d7c6acd778
|
|
PiperOrigin-RevId: 234691125
Change-Id: I2a588153ded5a4fbed07bc2f0937a43ccfba791b
|
|
PiperOrigin-RevId: 234690475
Change-Id: I1cbfb5aecd4697a4a26ec8524354aa8656cc3ba1
|
|
The final merged patch in Linux 4.10,
4ab1586488cb56ed8728e54c4157cc38646874d9 ("x86/cpufeature: Add RDT CPUID
feature bits") named this feature "rdt_a". Earlier patch sets had named
this "rdt".
PiperOrigin-RevId: 234680481
Change-Id: I0cc968201ec9a2825701405e207994a7331322b7
|
|
- Use new user namespace for namespace creation checks.
- Ensure userns is never nil since it's used by other namespaces.
PiperOrigin-RevId: 234673175
Change-Id: I4b9d9d1e63ce4e24362089793961a996f7540cd9
|
|
In addition to simplifying the implementation, this fixes two bugs:
- seqfile.NewSeqFile unconditionally creates an inode with mode 0444,
but {uid,gid}_map have mode 0644.
- idMapSeqFile.Write implements fs.FileOperations.Write ... but it
doesn't implement any other fs.FileOperations methods and is never
used as fs.FileOperations. idMapSeqFile.GetFile() =>
seqfile.SeqFile.GetFile() uses seqfile.seqFileOperations instead,
which rejects all writes.
PiperOrigin-RevId: 234638212
Change-Id: I4568f741ab07929273a009d7e468c8205a8541bc
|
|
This allows setting a default send interface for IPv4 multicast. IPv6 support
will come later.
PiperOrigin-RevId: 234251379
Change-Id: I65922341cd8b8880f690fae3eeb7ddfa47c8c173
|
|
PiperOrigin-RevId: 234237297
Change-Id: Ic9b7a37db831556d2c2cf733a6e27fba27afee0b
|
|
SO_TIMESTAMP is reimplemented in ping and UDP sockets (and needs to be added for
TCP), but can just be implemented in epsocket for simplicity. This will also
make SIOCGSTAMP easier to implement.
PiperOrigin-RevId: 234179300
Change-Id: Ib5ea0b1261dc218c1a8b15a65775de0050fe3230
|
|
PiperOrigin-RevId: 234169795
Change-Id: I3c576ae6ad460e2c0e3f142a2671dc18d34a07ef
|
|
PiperOrigin-RevId: 234147487
Change-Id: I779a6012832bb94a6b89f5bcc7d821b40ae969cc
|
|
If a background process tries to read from a TTY, linux sends it a SIGTTIN
unless the signal is blocked or ignored, or the process group is an orphan, in
which case the syscall returns EIO.
See drivers/tty/n_tty.c:n_tty_read()=>job_control().
If a background process tries to write a TTY, set the termios, or set the
foreground process group, linux then sends a SIGTTOU. If the signal is ignored
or blocked, linux allows the write. If the process group is an orphan, the
syscall returns EIO.
See drivers/tty/tty_io.c:tty_check_change().
PiperOrigin-RevId: 234044367
Change-Id: I009461352ac4f3f11c5d42c43ac36bb0caa580f9
|
|
PiperOrigin-RevId: 234011346
Change-Id: Ic69375ddb3794dd0d3d6e62ee4dc60fdf4baf2c7
|
|
PACKET_RX_RING allows the use of an mmapped buffer to receive packets from the
kernel. This should cut down the number of host syscalls that need to be made
to receive packets when the underlying fd is a socket of the AF_PACKET type.
PiperOrigin-RevId: 233834998
Change-Id: I8060025c6ced206986e94cc46b8f382b81bfa47f
|
|
- Fix CopyIn/CopyOut/ZeroOut range checks.
- Include the faulting signal number in the panic message.
PiperOrigin-RevId: 233829501
Change-Id: I8959ead12d05dbd4cd63c2b908cddeb2a27eb513
|
|
PiperOrigin-RevId: 233802562
Change-Id: I40e1b13fd571daaf241b00f8df4bcedd034dc3f1
|
|
Linux started doing this in b8be15d588060a03569ac85dc4a0247460988f5b
("x86/fpu/xstate: Re-enable XSAVES"), which first appeared in 4.8.
PiperOrigin-RevId: 233800931
Change-Id: Icac2c2b03ccf1a91f3070431efb5152ca619fca3
|
|
RFC7323 recommends that if the timestamp option was negotiated
then all packets should carry a TCP Timestamp and any packets that
do not should be dropped.
Netstack implemented this behaviour. Linux OTOH does not and will
accept such packets. This change makes Netstack behaviour compatible
with Linux.
Also now that we allow such packets, we do need to update RTO calculations
based on these packets even if timestamp option is enabled.
PiperOrigin-RevId: 233432268
Change-Id: I9f4742ae6b63930ac3b5e37d8c238761e6a4b29f
|
|
fs/gofer/inodeOperations.Release does some asynchronous work. Previously it
was calling fs.Async with an anonymous function, which caused the function to
be allocated on the heap. Because Release is relatively hot, this results in a
lot of small allocations and increased GC pressure, noticeable in perf profiles.
This CL adds a new function, AsyncWithContext, which is just like Async, but
passes a context to the async function. It avoids the need for an extra
anonymous function in fs/gofer/inodeOperations.Release. The Async function
itself still requires a single anonymous function.
PiperOrigin-RevId: 233141763
Change-Id: I1dce4a883a7be9a8a5b884db01e654655f16d19c
|
|
CopyObjectOut grows its destination byte slice incrementally, causing
many small slice allocations on the heap. This leads to increased GC and
noticeably slower stat calls.
PiperOrigin-RevId: 233140904
Change-Id: Ieb90295dd8dd45b3e56506fef9d7f86c92e97d97
|
|
PiperOrigin-RevId: 233139020
Change-Id: I2e7089fa25d20e5662eb941054a684d41f5d3e12
|
|
PiperOrigin-RevId: 233124342
Change-Id: Id4b4857af89815ffb9254cc30df4244b2768d9f2
|
|
This adds an extra Reflection call to CopyObjectOut, but avoids many small
slice allocations if the object is large, since without this we grow the
backing slice incrementally as we encode more data.
PiperOrigin-RevId: 233110960
Change-Id: I93569af55912391e5471277f779139c23f040147
|
|
Prevents URPC FDs from being closed mid-call, especially if they
are used as raw FDs.
PiperOrigin-RevId: 233087955
Change-Id: I815a2ff32cc5f03774605aef0b35a32862f8e633
|
|
Also includes a few fixes for IPv4 multicast support. IPv6 support is coming in
a followup CL.
PiperOrigin-RevId: 233008638
Change-Id: If7dae6222fef43fda48033f0292af77832d95e82
|
|
PiperOrigin-RevId: 232948478
Change-Id: Ib830121e5e79afaf5d38d17aeef5a1ef97913d23
|
|
It currently allocates a new context on the heap each time it is called. Some
of these are in relatively hot paths like signal delivery and releasing gofer
inodes. It is also called very commonly in afterLoad. All of these should
benefit from fewer heap allocations.
PiperOrigin-RevId: 232938873
Change-Id: I53cec0ca299f56dcd4866b0b4fd2ec4938526849
|
|
PiperOrigin-RevId: 232937200
Change-Id: I5c3709cc8f1313313ff618a45e48c14a3a111cb4
|
|
PiperOrigin-RevId: 232914984
Change-Id: Id2643d7ad8e986ca9be76d860788a71db2674cda
|
|
- Change proc to return envp on overwrite of argv with limitations from
upstream.
- Add unit tests
- Change layout of argv/envp on the stack so that end of argv is contiguous with
beginning of envp.
PiperOrigin-RevId: 232506107
Change-Id: I993880499ab2c1220f6dc456a922235c49304dec
|
|
Dirty should be set only when the attribute is changed in the cache
only. Instances where the change was also sent to the backing file
doesn't need to dirty the attribute.
Also remove size update during WriteOut as writing dirty page would
naturaly grow the file if needed.
RELNOTES: relnotes is needed for the parent CL.
PiperOrigin-RevId: 232068978
Change-Id: I00ba54693a2c7adc06efa9e030faf8f2e8e7f188
|
|
PiperOrigin-RevId: 232047515
Change-Id: I00f036816e320356219be7b2f2e6d5fe57583a60
|
|
PiperOrigin-RevId: 231889261
Change-Id: I482f1df055bcedf4edb9fe3fe9b8e9c80085f1a0
|
|
PiperOrigin-RevId: 231861005
Change-Id: I134d4e20cc898d44844219db0a8aacda87e11ef0
|
|
This changed required making fsutil.HostMappable use
a backing file to ensure the correct FD would be used
for read/write operations.
RELNOTES: relnotes is needed for the parent CL.
PiperOrigin-RevId: 231836164
Change-Id: I8ae9639715529874ea7d80a65e2c711a5b4ce254
|