Age | Commit message (Collapse) | Author |
|
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: If35459be78e023346a140184401172f8e023c7f9
PiperOrigin-RevId: 231638020
|
|
quoting what "rscheff@gmx.at" pointed out over email.
"IsLost in RFC3517 is defined as >= (DupThresh * SMSS) while
RFC6675 improves upon this, and defines IsLost as >
((DupThresh - 1) * SMSS + 1).
The latter addresses situations where partial segments (size < MSS)
are sent (eg. last segment of a http protocol message sent with PSH
being less than MSS is common)."
PiperOrigin-RevId: 231512331
Change-Id: I1addd4a92e3e7baeb0bdda46463ebfae435da958
|
|
Also adds a test for regular NIC forwarding.
PiperOrigin-RevId: 231495279
Change-Id: Ic7edec249568e9ad0280cea77eac14478c9073e1
|
|
This should reduce the number of syscalls required to process packets
significantly and improve throughputs.
PiperOrigin-RevId: 231366886
Change-Id: I8b38077262bf9c53176bc4a94b530188d3d7c0ca
|
|
PiperOrigin-RevId: 231301228
Change-Id: I3e18f3a12a35fb89a22a8c981188268d5887dc61
|
|
We were modifying InodeSimpleAttributes.Unstable.AccessTime without holding
the necessary lock. Luckily for us, InodeSimpleAttributes already has a
NotifyAccess method that will do the update while holding the lock.
In addition, we were holding dfo.dir.mu.Lock while setting AccessTime, which
is unnecessary, so that lock has been removed.
PiperOrigin-RevId: 231278447
Change-Id: I81ed6d3dbc0b18e3f90c1df5e5a9c06132761769
|
|
It never actually should have applied to environ (the relevant change in
Linux 4.2 is c2c0bb44620d "proc: fix PAGE_SIZE limit of
/proc/$PID/cmdline"), and we claim to be Linux 4.4 now anyway.
PiperOrigin-RevId: 231250661
Change-Id: I37f9c4280a533d1bcb3eebb7803373ac3c7b9f15
|
|
When file size changes outside the sandbox, page cache was not
refreshing file size which is required for cacheRemoteRevalidating.
In fact, cacheRemoteRevalidating should be skipping the cache
completely since it's not really benefiting from it. The cache is
cache is already bypassed for unstable attributes (see
cachePolicy.cacheUAttrs). And althought the cache is called to
map pages, they will always miss the cache and map directly from
the host.
Created a HostMappable struct that maps directly to the host and
use it for files with cacheRemoteRevalidating.
Closes #124
PiperOrigin-RevId: 230998440
Change-Id: Ic5f632eabe33b47241e05e98c95e9b2090ae08fc
|
|
Change-Id: I94704a90beebb53164325e0cce1fcb9a0b97d65c
PiperOrigin-RevId: 230817308
|
|
Most of the entries are stubbed out at the moment, but even those were
only displayed if IPv6 support was enabled. The entries should be
displayed with IPv4-support only, and with only loopback devices.
PiperOrigin-RevId: 229946441
Change-Id: I18afaa3af386322787f91bf9d168ab66c01d5a4c
|
|
PiperOrigin-RevId: 229781337
Change-Id: I1f946cff2771714fb1abd83a83ed454e9febda0a
|
|
PiperOrigin-RevId: 229427852
Change-Id: I9de8ed63f4a7672dacd3b282c863c599d00acd52
|
|
More helper structs have been added to the fsutil package to make it easier to
implement fs.InodeOperations and fs.FileOperations.
PiperOrigin-RevId: 229305982
Change-Id: Ib6f8d3862f4216745116857913dbfa351530223b
|
|
PiperOrigin-RevId: 229243918
Change-Id: Ie14ef34e66ae851ed080f57b7d26a369a66f7664
|
|
PiperOrigin-RevId: 228979583
Change-Id: I69bd82def48ceb19bc8558c890622b8528d98764
|
|
Removing check to RLIMIT_NOFILE in select call.
Adding unit test to select suite to document behavior.
Moving setrlimit class from mlock to a util file for reuse.
Fixing flaky test based on comments from Jamie.
PiperOrigin-RevId: 228726131
Change-Id: Ie9dbe970bbf835ba2cca6e17eec7c2ee6fadf459
|
|
- Call MemoryEvents.done.Add(1) outside of MemoryEvents.run() so that if
MemoryEvents.Stop() => MemoryEvents.done.Wait() is called before the
goroutine starts running, it still waits for the goroutine to stop.
- Use defer to call MemoryEvents.done.Done() in MemoryEvents.run() so that it's
called even if the goroutine panics.
PiperOrigin-RevId: 228623307
Change-Id: I1b0459e7999606c1a1a271b16092b1ca87005015
|
|
overlayFileOperations.Readdir was holding overlay.copyMu while calling
DirentReaddir, which then attempts to take take the corresponding Dirent.mu,
causing a lock order violation. (See lock order documentation in
fs/copy_up.go.)
We only actually need to hold copyMu during readdirEntries(), so holding the
lock is moved in there, thus avoiding the lock order violation.
A new lock was added to protect overlayFileOperations.dirCache. We were
inadvertently relying on copyMu to protect this. There is no reason it should
not have its own lock.
PiperOrigin-RevId: 228542473
Change-Id: I03c3a368c8cbc0b5a79d50cc486fc94adaddc1c2
|
|
PiperOrigin-RevId: 228428223
Change-Id: I433ba5ffc15ea4c2706ec944901b8269b1f364f8
|
|
PiperOrigin-RevId: 228382827
Change-Id: Ica1d30e0df826bdd77f180a5092b2b735ea5c804
|
|
See modified comment in auth.NewUserCredentials(); compare to the
behavior of setresuid(2) as implemented by
//pkg/sentry/kernel/task_identity.go:kernel.Task.setKUIDsUncheckedLocked().
PiperOrigin-RevId: 228381765
Change-Id: I45238777c8f63fcf41b99fce3969caaf682fe408
|
|
This enables formatting tcpip.Stats readably with %+v.
PiperOrigin-RevId: 228379088
Change-Id: I6a9876454a22f151ee752cf94589b4188729458f
|
|
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
PiperOrigin-RevId: 228249611
Change-Id: I1046e70bec4274f18b9948eefd6b0d546e4c48bb
|
|
PiperOrigin-RevId: 228245523
Change-Id: I5a4d0a6570b93958e51437e917e5331d83e23a7e
|
|
Not allowing this was an oversight.
PiperOrigin-RevId: 227757813
Change-Id: I845800ab69028b7320afca36d832c477ff17c5ce
|
|
Using linux.Errno as an error doesn't work very well as none of the sentry code
expects error to contain a linux.Errno.
This moves using syserr.Error.ToLinux as an error in a syscall handler from a
runtime error to a compile error.
PiperOrigin-RevId: 227744312
Change-Id: Iea63108a5b198296c908614e09c01733dd684da0
|
|
FIO reads this file and expects it to be well formed.
PiperOrigin-RevId: 227554483
Change-Id: Ia48ae2377626dd6a2daf17b5b4f5119f90ece55b
|
|
This option allows multiple sockets to be bound to the same port.
Incoming packets are distributed to sockets using a hash based on source and
destination addresses. This means that all packets from one sender will be
received by the same server socket.
PiperOrigin-RevId: 227153413
Change-Id: I59b6edda9c2209d5b8968671e9129adb675920cf
|
|
epoll_wait acquires EventPoll.listsMu (in EventPoll.ReadEvents) and
then calls Inotify.Readiness which tries to acquire Inotify.evMu.
getdents acquires Inotify.evMu (in Inotify.queueEvent) and then calls
readyCallback.Callback which tries to acquire EventPoll.listsMu.
The fix is to release Inotify.evMu before calling Queue.Notify. Queue
is thread-safe and doesn't require Inotify.evMu to be held.
Closes #121
PiperOrigin-RevId: 227066695
Change-Id: Id29364bb940d1727f33a5dff9a3c52f390c15761
|
|
PiperOrigin-RevId: 226993086
Change-Id: I71757f231436538081d494da32ca69f709bc71c7
|
|
PiperOrigin-RevId: 226936778
Change-Id: I2a6dda157c55d39d81e1b543ab11a58a0bfe5c05
|
|
We don't explicitly support out-of-band data and treat it like normal in-band
data. This is equilivent to SO_OOBINLINE being enabled, so always report that
it is enabled.
PiperOrigin-RevId: 226572742
Change-Id: I4c30ccb83265e76c30dea631cbf86822e6ee1c1b
|
|
PiperOrigin-RevId: 226542979
Change-Id: Ife11ebd0a85b8a63078e6daa71b4a99a82080ac9
|
|
Within gVisor, plumb new socket options to netstack.
Within netstack, fix GetSockOpt and SetSockOpt return value logic.
PiperOrigin-RevId: 226532229
Change-Id: If40734e119eed633335f40b4c26facbebc791c74
|
|
The code that matches the event being published with events watchers
was wronly matching all watchers in case any of the control event bits
were set.
Issue #121
PiperOrigin-RevId: 226521230
Change-Id: Ie2c42bc4366faaf59fbf80a74e9297499bd93f9e
|
|
PiperOrigin-RevId: 226493053
Change-Id: Ia98d1cb6dd0682049e4d907ef69619831de5c34a
|
|
We must wait for all lazy resources to be released before closing the rootFile.
PiperOrigin-RevId: 226419499
Change-Id: I1d4d961a92b3816e02690cf3eaf0a88944d730cc
|
|
PiperOrigin-RevId: 226387521
Change-Id: I0579ab262320fde6c72d2994dd38437f01a99ea5
|
|
"RLIMIT_MEMLOCK: This is the maximum number of bytes of memory that may
be locked into RAM." - getrlimit(2)
PiperOrigin-RevId: 226384346
Change-Id: Iefac4a1bb69f7714dc813b5b871226a8344dc800
|
|
PiperOrigin-RevId: 226224230
Change-Id: Id24c7d3733722fd41d5fe74ef64e0ce8c68f0b12
|
|
Implement pwritev2 and associated unit tests.
Clean up preadv2 unit tests.
Tag RWF_ flags in both preadv2 and pwritev2 with associated bug tickets.
PiperOrigin-RevId: 226222119
Change-Id: Ieb22672418812894ba114bbc88e67f1dd50de620
|
|
Also remove useless RSS changes in mm.movePMAsLocked().
PiperOrigin-RevId: 226052996
Change-Id: If59fd259b93238fb2f15c1c8ebfeda14cb590a87
|
|
... as required by the latter's precondition.
PiperOrigin-RevId: 226033824
Change-Id: I6bc46d0e100c61cc58cb5fc69e70c4ca905cd92d
|
|
PiperOrigin-RevId: 226018694
Change-Id: I98965e26fe565f37e98e5df5f997363ab273c91b
|
|
Connectionless Unix sockets (DGRAM Unix sockets created with the socket system
call) inherently only have a read queue. They do not establish bidirectional
connections, instead, the connect system call only sets a default send
location. Writes give the data to the other endpoint which has its own read
queue.
To simplify the code, connectionless Unix sockets still get read and write
queues, but the write queue is a dummy and never waited on. The read queue is
the connectionless endpoint's queue. This change fixes a bug where the dummy
queue was incorrectly set as the read queue and the endpoint's queue was
incorrectly set as the write queue. This meant that read notifications went
to the dummy queue and were black holed.
PiperOrigin-RevId: 225921042
Change-Id: I8d9059def787a2c3c305185b92d05093fbd2be2a
|
|
The old overlayBoundEndpoint assumed that the lower is not an overlay. It
should check if the lower is an overlay and handle that case.
PiperOrigin-RevId: 225882303
Change-Id: I60660c587d91db2826e0719da0983ec8ad024cb8
|
|
Currently mlock() and friends do nothing whatsoever. However, mlocking
is directly application-visible in a number of ways; for example,
madvise(MADV_DONTNEED) and msync(MS_INVALIDATE) both fail on mlocked
regions. We handle this inconsistently: MADV_DONTNEED is too important
to not work, but MS_INVALIDATE is rejected.
Change MM to track mlocked regions in a manner consistent with Linux.
It still will not actually pin pages into host physical memory, but:
- mlock() will now cause sentry memory management to precommit mlocked
pages.
- MADV_DONTNEED and MS_INVALIDATE will interact with mlocked pages as
described above.
PiperOrigin-RevId: 225861605
Change-Id: Iee187204979ac9a4d15d0e037c152c0902c8d0ee
|
|
Same as with broadcast packets, sending of a multicast packet shouldn't require
accessing the route table. The same applies to IPv6 link-local addresses, which
aren't routable at all (they don't belong to any subnet by definition).
PiperOrigin-RevId: 225775870
Change-Id: Ic53e6560c125a83be2be9c3d112e66b36e8dfe7b
|
|
PiperOrigin-RevId: 225632398
Change-Id: I909e7e2925aa369adc28e844c284d9a6108e85ce
|
|
PiperOrigin-RevId: 225621767
Change-Id: Ie3a42cdf0b0de22a020ff43e307bf86409cff329
|