| Age | Commit message (Collapse) | Author |
|---|
|
SockType isn't specific to unix domain sockets, and the current
definition basically mirrors the linux ABI's definition.
PiperOrigin-RevId: 251956740
|
|
Overlayfs was expecting the parent to exist when bind(2)
was called, which may not be the case. The fix is to copy
the parent directory to the upper layer before binding
the UDS.
There is not good place to add tests for it. Syscall tests
would be ideal, but it's hard to guarantee that the
directory where the socket is created hasn't been touched
before (and thus copied the parent to the upper layer).
Added it to runsc integration tests for now. If it turns
out we have lots of these kind of tests, we can consider
moving them somewhere more appropriate.
PiperOrigin-RevId: 251954156
|
|
We still only advertise a single NUMA node, and ignore mempolicy
accordingly, but mbind() at least now succeeds and has effects reflected
by get_mempolicy().
Also fix handling of nodemasks: round sizes to unsigned long (as
documented and done by Linux), and zero trailing bits when copying them
out.
PiperOrigin-RevId: 251950859
|
|
PiperOrigin-RevId: 251950660
|
|
This is necessary for implementing network diagnostic interfaces like
/proc/net/{tcp,udp,unix} and sock_diag(7).
For pass-through endpoints such as hostinet, we obtain the socket
state from the backend. For netstack, we add explicit tracking of TCP
states.
PiperOrigin-RevId: 251934850
|
|
This allows an fdbased endpoint to have multiple underlying fd's from which
packets can be read and dispatched/written to.
This should allow for higher throughput as well as better scalability of the
network stack as number of connections increases.
Updates #231
PiperOrigin-RevId: 251852825
|
|
PiperOrigin-RevId: 251788534
|
|
This is required to make the shutdown visible to peers outside the
sandbox.
The readClosed / writeClosed fields were dropped, as they were
preventing a shutdown socket from reading the remainder of queued bytes.
The host syscalls will return the appropriate errors for shutdown.
The control message tests have been split out of socket_unix.cc to make
the (few) remaining tests accessible to testing inherited host UDS,
which don't support sending control messages.
Updates #273
PiperOrigin-RevId: 251763060
|
|
In case of GSO, a segment can container more than one packet
and we need to use the pCount() helper to get a number of packets.
PiperOrigin-RevId: 251743020
|
|
Multicast packets are special in that their destination address does not
identify a specific interface. When sending out such a packet the multicast
address is the remote address, but for incoming packets it is the local
address. Hence, when looping a multicast packet, the route needs to be
tweaked to reflect this.
PiperOrigin-RevId: 251739298
|
|
We don't actually support core dumps, but some applications want to
get/set dumpability, which still has an effect in procfs.
Lack of support for set-uid binaries or fs creds simplifies things a
bit.
As-is, processes started via CreateProcess (i.e., init and sentryctl
exec) have normal dumpability. I'm a bit torn on whether sentryctl exec
tasks should be dumpable, but at least since they have no parent normal
UID/GID checks should protect them.
PiperOrigin-RevId: 251712714
|
|
When checking the length of the acceptedChan we should hold the
endpoint mutex otherwise a syn received while the listening socket
is being closed can result in a data race where the cleanupLocked
routine sets acceptedChan to nil while a handshake goroutine
in progress could try and check it at the same time.
PiperOrigin-RevId: 251537697
|
|
When pipe is created, a dirent of pipe will be
created and its initial reference is set as 0.
Cause all dirent will only be destroyed when
the reference decreased to -1, so there is already
a 'initial reference' of dirent after it created.
For destroying dirent after all reference released,
the correct way is to drop the 'initial reference'
once someone hold a reference to the dirent, such
as fs.NewFile, otherwise the reference of dirent
will stay 0 all the time, and will cause memory
leak of dirent.
Except pipe, timerfd/eventfd/epoll has the same
problem
Here is a simple case to create memory leak of dirent
for pipe/timerfd/eventfd/epoll in C langange, after
run the case, pprof the runsc process, you will
find lots dirents of pipe/timerfd/eventfd/epoll not
freed:
int main(int argc, char *argv[])
{
int i;
int n;
int pipefd[2];
if (argc != 3) {
printf("Usage: %s epoll|timerfd|eventfd|pipe <iterations>\n", argv[0]);
}
n = strtol(argv[2], NULL, 10);
if (strcmp(argv[1], "epoll") == 0) {
for (i = 0; i < n; ++i)
close(epoll_create(1));
} else if (strcmp(argv[1], "timerfd") == 0) {
for (i = 0; i < n; ++i)
close(timerfd_create(CLOCK_REALTIME, 0));
} else if (strcmp(argv[1], "eventfd") == 0) {
for (i = 0; i < n; ++i)
close(eventfd(0, 0));
} else if (strcmp(argv[1], "pipe") == 0) {
for (i = 0; i < n; ++i)
if (pipe(pipefd) == 0) {
close(pipefd[0]);
close(pipefd[1]);
}
}
printf("%s %s test finished\r\n",argv[1],argv[2]);
return 0;
}
Change-Id: Ia1b8a1fb9142edb00c040e44ec644d007f81f5d2
PiperOrigin-RevId: 251531096
|
|
Dirents are ref-counted, but Pipes are not. Holding a Dirent inside of a Pipe
raises difficult questions about the lifecycle of the Pipe and Dirent.
Fortunately, we can side-step those questions by removing the Dirent field from
Pipe entirely. We only need the Dirent when constructing fs.Files (which are
ref-counted), and in GetFile (when a Dirent is passed to us anyways).
PiperOrigin-RevId: 251497628
|
|
and don't report a sender address if it doesn't have one
PiperOrigin-RevId: 251371284
|
|
The io.Writer contract requires that Write writes all available
bytes and does not return short writes. This causes errors with
io.Copy, since our own Write interface does not have this same
contract.
PiperOrigin-RevId: 251368730
|
|
Updates #236
PiperOrigin-RevId: 251337915
|
|
Right now, mremap allows to remap a memory region over MaxUserAddress,
this means that we can change the stub region.
PiperOrigin-RevId: 251266886
|
|
PiperOrigin-RevId: 250976665
|
|
Netstack sets the unprocessed segment queue size to match the receive
buffer size. This is not required as this queue only needs to hold enough
for a short duration before the endpoint goroutine can process it.
Updates #230
PiperOrigin-RevId: 250976323
|
|
There is no reason to do the recursion manually, since
Inode.BoundEndpoint will do it for us.
PiperOrigin-RevId: 250794903
|
|
Funcion signatures are not validated during compilation. Since
they are not exported, they can change at any time. The guard
ensures that they are verified at least on every version upgrade.
PiperOrigin-RevId: 250733742
|
|
Netstack listen loop can get stuck if cookies are in-use and the app is slow to
accept incoming connections. Further we continue to complete handshake for a
connection even if the backlog is full. This creates a problem when a lots of
connections come in rapidly and we end up with lots of completed connections
just hanging around to be delivered.
These fixes change netstack behaviour to mirror what linux does as described
here in the following article
http://veithen.io/2014/01/01/how-tcp-backlog-works-in-linux.html
Now when cookies are not in-use Netstack will silently drop the ACK to a SYN-ACK
and not complete the handshake if the backlog is full. This will result in the
connection staying in a half-complete state. Eventually the sender will
retransmit the ACK and if backlog has space we will transition to a connected
state and deliver the endpoint.
Similarly when cookies are in use we do not try and create an endpoint unless
there is space in the accept queue to accept the newly created endpoint. If
there is no space then we again silently drop the ACK as we can just recreate it
when the ACK is retransmitted by the peer.
We also now use the backlog to cap the size of the SYN-RCVD queue for a given
endpoint. So at any time there can be N connections in the backlog and N in a
SYN-RCVD state if the application is not accepting connections. Any new SYNs
will be dropped.
This CL also fixes another small bug where we mark a new endpoint which has not
completed handshake as connected. We should wait till handshake successfully
completes before marking it connected.
Updates #236
PiperOrigin-RevId: 250717817
|
|
Upstream Go has no changes here.
PiperOrigin-RevId: 250602731
|
|
VmData is the size of private data segments.
It has the same meaning as in Linux.
Change-Id: Iebf1ae85940a810524a6cde9c2e767d4233ddb2a
PiperOrigin-RevId: 250593739
|
|
Updates #220
PiperOrigin-RevId: 250532302
|
|
PiperOrigin-RevId: 250426407
|
|
After bf959931ddb88c4e4366e96dd22e68fa0db9527c ("wait/ptrace: assume
__WALL if the child is traced") (Linux 4.7), tracees are always eligible
for waiting, regardless of type.
PiperOrigin-RevId: 250399527
|
|
The original bug is no longer relevant, and the FIXME here
contains lots of obsolete information.
PiperOrigin-RevId: 249924036
|
|
We don't need to model internal interfaces after the system
call interfaces (which are objectively worse and simply use a
flag to distinguish between two logically different operations).
PiperOrigin-RevId: 249916814
Change-Id: I45d02e0ec0be66b782a685b1f305ea027694cab9
|
|
PiperOrigin-RevId: 249888234
Change-Id: Icfef32c3ed34809c34100c07e93e9581c786776e
|
|
These wakers are uselessly allocated and passed around; nothing ever
listens for notifications on them. The code here appears to be
vestigial, so removing it and allowing a nil waker to be passed seems
appropriate.
PiperOrigin-RevId: 249879320
Change-Id: Icd209fb77cc0dd4e5c49d7a9f2adc32bf88b4b71
|
|
sendfile can be called for a big range and it can require significant
amount of time to process it, so we need to handle task interrupts in
this system call.
PiperOrigin-RevId: 249781023
Change-Id: Ifc2ec505d74c06f5ee76f93b8d30d518ec2d4015
|
|
Initialized BUILD with license
Mount is still unimplemented and is not meant to be
part of this CL. Rest of the fs interface is implemented.
Referenced the Linux kernel appropriately when needed
PiperOrigin-RevId: 249741997
Change-Id: Id1e4c7c9e68b3f6946da39896fc6a0c3dcd7f98c
|
|
Separate MountSource from Mount. This is needed to allow
mounts to be shared by multiple containers within the same
pod.
PiperOrigin-RevId: 249617810
Change-Id: Id2944feb7e4194951f355cbe6d4944ae3c02e468
|
|
gopark's signature was changed from having a string reason to a
uint8.
See: https://github.com/golang/go/commit/4d7cf3fedbc382215df5ff6167ee9782a9cc9375
This broke execution tracing of the sentry.
Switching to the right signature makes tracing work again.
Updates #220
PiperOrigin-RevId: 249565311
Change-Id: If77fd276cecb37d4003c8222f6de510b8031a074
|
|
PiperOrigin-RevId: 249561399
Change-Id: Ic73c68c8538bdca53068f38f82b7260939addac2
|
|
The previous commit adds WNOTHREAD support to waitid, so we may as well
complete the upstream change.
Linux added WCLONE, WALL, WNOTHREAD support to waitid(2) in
91c4e8ea8f05916df0c8a6f383508ac7c9e10dba ("wait: allow sys_waitid() to
accept __WNOTHREAD/__WCLONE/__WALL"). i.e., Linux 4.7.
PiperOrigin-RevId: 249560587
Change-Id: Iff177b0848a3f7bae6cb5592e44500c5a942fbeb
|
|
There no obvious reason to require that BlockSize and StatFS
are MountSource operations. Today they are in INodeOperations,
and they can be moved elsewhere in the future as part of a
normal refactor process.
PiperOrigin-RevId: 249549982
Change-Id: Ib832e02faeaf8253674475df4e385bcc53d780f3
|
|
PiperOrigin-RevId: 249537694
Change-Id: Iaa4bca73a2d8341e03064d59a2eb490afc3f80da
|
|
PiperOrigin-RevId: 249511348
Change-Id: I34539092cc85032d9473ff4dd308fc29dc9bfd6b
|
|
Updates #214
PiperOrigin-RevId: 249483756
Change-Id: I0d3cf4112bed75a863d5eb08c2063fbc506cd875
|
|
Pipe internals are made more efficient by avoiding garbage collection.
A pool is now used that can be shared by all pipes, and buffers are
chained via an intrusive list. The documentation for pipe structures
and methods is also simplified and clarified.
The pipe tests are now parameterized, so that they are run on all
different variants (named pipes, small buffers, default buffers).
The pipe buffer sizes are exposed by fcntl, which is now supported
by this change. A size change test has been added to the suite.
These new tests uncovered a bug regarding the semantics of open
named pipes with O_NONBLOCK, which is also fixed by this CL. This
fix also addresses the lack of the O_LARGEFILE flag for named pipes.
PiperOrigin-RevId: 249375888
Change-Id: I48e61e9c868aedb0cadda2dff33f09a560dee773
|
|
* A segment with filesz == 0, memsz > 0 should be an anonymous only
mapping. We were failing to load such an ELF.
* Anonymous pages are always mapped RW, regardless of the segment
protections.
PiperOrigin-RevId: 249355239
Change-Id: I251e5c0ce8848cf8420c3aadf337b0d77b1ad991
|
|
This is in preparation to support an fdbased endpoint that can read/dispatch
packets from multiple underlying fds.
Updates #231
PiperOrigin-RevId: 249337074
Change-Id: Id7d375186cffcf55ae5e38986e7d605a96916d35
|
|
This does not actually implement an efficient splice or sendfile. Rather, it
adds a generic plumbing to the file internals so that this can be added. All
file implementations use the stub fileutil.NoSplice implementation, which
causes sendfile and splice to fall back to an internal copy.
A basic splice system call interface is added, along with a test.
PiperOrigin-RevId: 249335960
Change-Id: Ic5568be2af0a505c19e7aec66d5af2480ab0939b
|
|
Remove unused struct member.
PiperOrigin-RevId: 249300446
Change-Id: Ifb16538f684bc3200342462c3da927eb564bf52d
|
|
The backing 9p server must allow named pipe creation, which the runsc
fsgofer currently does not.
There are small changes to the overlay here. GetFile may block when
opening a named pipe, which can cause a deadlock:
1. open(O_RDONLY) -> copyMu.Lock() -> GetFile()
2. open(O_WRONLY) -> copyMu.Lock() -> Deadlock
A named pipe usable for writing must already be on the upper filesystem,
but we are still taking copyMu for write when checking for upper. That
can be changed to a read lock to fix the common case.
However, a named pipe on the lower filesystem would still deadlock in
open(O_WRONLY) when it tries to actually perform copy up (which would
simply return EINVAL). Move the copy up type check before taking copyMu
for write to avoid this.
p9 must be modified, as it was incorrectly removing the file mode when
sending messages on the wire.
PiperOrigin-RevId: 249154033
Change-Id: Id6637130e567b03758130eb6c7cdbc976384b7d6
|
|
* Creation of files, directories (and other fs objects) in a directory
should always update ctime.
* Same for removal.
* atime should not be updated on lookup, only readdir.
I've also renamed some misleading functions that update mtime and ctime.
PiperOrigin-RevId: 249115063
Change-Id: I30fa275fa7db96d01aa759ed64628c18bb3a7dc7
|
|
This more directly matches what Linux does with unsupported
nodes.
PiperOrigin-RevId: 248780425
Change-Id: I17f3dd0b244f6dc4eb00e2e42344851b8367fbec
|
