Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 321411758
|
|
When we failed to create the new socket after adding the fd to
fdnotifier, we should remove the fd from fdnotifier, because we
are going to close the fd directly.
Fixes: #3241
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
|
|
PiperOrigin-RevId: 321269281
|
|
PiperOrigin-RevId: 321060717
|
|
PiperOrigin-RevId: 321053634
|
|
When --debug is enabled, the following log messages are
printed every second filling up the log:
D0430 18:04:42.823775 129561 parameters.go:238] Clock(Monotonic): error: 46 ns, adjusted frequency from 3591713733 Hz to 3591714196 Hz
D0430 18:04:42.823870 129561 parameters.go:238] Clock(Realtime): error: 36 ns, adjusted frequency from 3591714003 Hz to 3591714169 Hz
D0430 18:04:42.823892 129561 timekeeper.go:209] Updating VDSO parameters: {monotonicReady:1 monotonicBaseCycles:15758797714254696 monotonicBaseRef:29000233837 monotonicFrequency:3591714196 realtimeReady:1 realtimeBaseCycles:15758797714610880 realtimeBaseRef:1588269882823867374 realtimeFrequency:3591714169}
Info and warning messages for larger changes are kept the same.
PiperOrigin-RevId: 321048523
|
|
PiperOrigin-RevId: 321035635
|
|
PiperOrigin-RevId: 321028238
|
|
For accessing metadata fields:
- If metadataMu is locked, we can access without atomics
- If metadataMu is unlocked, we should use atomics
For mutating metadata fields:
- Always lock metadataMu and use atomics.
There were some instances of inconsistencies which have been fixed.
PiperOrigin-RevId: 321022895
|
|
PiperOrigin-RevId: 321021071
|
|
PiperOrigin-RevId: 321020733
|
|
As in Linux, we must periodically clean up unused connections.
PiperOrigin-RevId: 321003353
|
|
sleep.Waker's fields are modified as values.
PiperOrigin-RevId: 320873451
|
|
Updates #2746
PiperOrigin-RevId: 320757963
|
|
Split the kvm ut test cases to pass unit-tests on Arm64.
I will add the tls and full-context test cases for Arm64 later.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
RFC-1122 (and others) specify that UDP should not receive
datagrams that have a source address that is a multicast address.
Packets should never be received FROM a multicast address.
See also, RFC 768: 'User Datagram Protocol'
J. Postel, ISI, 28 August 1980
A UDP datagram received with an invalid IP source address
(e.g., a broadcast or multicast address) must be discarded
by UDP or by the IP layer (see rfc 1122 Section 3.2.1.3).
This CL does not address TCP or broadcast which is more complicated.
Also adds a test for both ipv6 and ipv4 UDP.
Fixes #3154
PiperOrigin-RevId: 320547674
|
|
The go.mod dependency tree for the shim was somehow contradictory. After
resolving these issues (e.g. explicitly imported k8s 1.14, pulling a
specific dbus version), and adding all dependencies, the shim can now be
build as part of the regular bazel tree.
As part of this process, minor cleanup was done in all the source files:
headers were standardized (and include "The gVisor Authors" in addition
to the "The containerd Authors" if originally derived from containerd
sources), and comments were cleaned up to meet coding standards.
This change makes the containerd installation dynamic, so that multiple
versions can be tested, and drops the static installer for the VM image
itself.
This change also updates test/root/crictl_test.go and related utilities,
so that the containerd tests can be run on any version (and in cases
where it applies, they can be run on both v1 and v2 as parameterized
tests).
|
|
|
|
|
|
Updates #2746
Fixes #3158
PiperOrigin-RevId: 320497190
|
|
This change gates all FUSE commands (by gating /dev/fuse) behind a runsc
flag. In order to use FUSE commands, use the --fuse flag with the --vfs2
flag. Check if FUSE is enabled by running dmesg in the sandbox.
|
|
Container restart test is disabled for VFS2 for now.
Updates #1487
PiperOrigin-RevId: 320296401
|
|
Moves following to new dockerutil API:
- //test/e2e:integration_test
- //test/image:image_test
- //test/iptables:iptables_test
- //test/root:root_test
- //test/packetimpact:packetimpact_test
PiperOrigin-RevId: 320253118
|
|
PiperOrigin-RevId: 320250773
|
|
Fixed an issue with the runtime test runner which enables us to run tests in
shards. We had to touch the status file as indicated by an env var.
PiperOrigin-RevId: 320236205
|
|
Removed VDSO dependency on VFS1.
Resolves #2921
PiperOrigin-RevId: 320122176
|
|
RFC 6864 imposes various restrictions on the uniqueness of the IPv4
Identification field for non-atomic datagrams, defined as an IP datagram that
either can be fragmented (DF=0) or is already a fragment (MF=1 or positive
fragment offset). In order to be compliant, the ID field is assigned for all
non-atomic datagrams.
Add a TCP unit test that induces retransmissions and checks that the IPv4
ID field is unique every time. Add basic handling of the IP_MTU_DISCOVER
socket option so that the option can be used to disable PMTU discovery,
effectively setting DF=0. Attempting to set the sockopt to anything other
than disabled will fail because PMTU discovery is currently not implemented,
and the default behavior matches that of disabled.
PiperOrigin-RevId: 320081842
|
|
The current convention is when a header is set to pkt.XxxHeader field, it
gets removed from pkt.Data. ICMP does not currently follow this convention.
PiperOrigin-RevId: 320078606
|
|
This change fixes a few things:
- creating sockets using mknod(2) is supported via vfs2
- fsgofer can create regular files via mknod(2)
- mode = 0 for mknod(2) will be interpreted as regular file in vfs2 as well
Updates #2923
PiperOrigin-RevId: 320074267
|
|
The fdnotifier package provides an API to a thread that continually epolls
arbitrary host FDs. The set of events polled for each host FD is (intended to
be) all events for which a waiter.Entry has expressed interest, as returned by
waiter.Queue.Events() for the waiter.Queue registered to the given host FD.
When the set of events changes (due to a change in the set of registered
waiter.Entries), the mutator must call fdnotifier.UpdateFD() to recalculate the
new event set and propagate it to the epoll FD.
PiperOrigin-RevId: 319924719
|
|
Calling sync on a readonly file flushes metadata that
may have been modified, like last access time.
Updates #1198
PiperOrigin-RevId: 319888290
|
|
Updates #2746
PiperOrigin-RevId: 319887810
|
|
PiperOrigin-RevId: 319882171
|
|
Reserve the MSB from ino for synthetic dentries to prevent
conflict with regular dentries. Log warning in case MSB is
set for regular dentries.
Updates #1487
PiperOrigin-RevId: 319869858
|
|
stack_x_test: 2m -> 20s
tcp_x_test: 80s -> 25s
PiperOrigin-RevId: 319828101
|
|
PiperOrigin-RevId: 319770124
|
|
Avoid a race where an arbitrary goroutine scheduling delay can cause the
processor to miss events and hang indefinitely.
Reduce allocations by storing processors by-value in the dispatcher, and
by using a single WaitGroup rather than one per processor.
PiperOrigin-RevId: 319665861
|
|
At present, when doing syscall_kvm test, we need to
enable the function of ESR_ELx_SYS64_ISS_SYS_CTR_READ to
successfully pass the test.
I set SCTLR_EL1.UCT==1, so that the related cases can passed.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
We do not support RWF_SYNC/RWF_DSYNC and probably shouldn't silently accept
them, since the user may incorrectly believe that we are synchronizing I/O.
Remove the pwritev2 test verifying that we support these flags.
gvisor.dev/issue/2601 is the tracking bug for deciding which RWF_.* flags
we need and supporting them.
Updates #2923, #2601.
PiperOrigin-RevId: 319351286
|
|
We were not invalidating mappings when the file size changed in shared mode.
Enabled the syscall test for vfs2.
Updates #2923
PiperOrigin-RevId: 319346569
|
|
Some Open:TruncateXxx syscall tests were failing because the file size was
not being updated when the file was opened with O_TRUNC.
Fixes Truncate tests in test/syscalls:open_test_runsc_ptrace_vfs2.
Updates #2923
PiperOrigin-RevId: 319340127
|
|
Complements cl/315991648.
PiperOrigin-RevId: 319327853
|
|
Currently, we always perform a full-file sync which could be extremely
expensive for some applications. Although vfs1 did not fully support
sync_file_range, there were some optimizations that allowed us skip some
unnecessary write-outs.
Updates #2923, #1897.
PiperOrigin-RevId: 319324213
|
|
The application can choose to initiate a non-blocking connect and
later block on a read, when the endpoint is still in SYN-SENT state.
PiperOrigin-RevId: 319311016
|
|
PiperOrigin-RevId: 319283715
|
|
- Support FIOASYNC, FIO{SET,GET}OWN, SIOC{G,S}PGRP (refactor getting/setting
owner in the process).
- Unset signal recipient when setting owner with pid == 0 and
valid owner type.
Updates #2923.
PiperOrigin-RevId: 319231420
|
|
a) When GSO is in use we should not cap the segment to maxPayloadSize in
sender.maybeSendSegment as the GSO logic will cap the segment to the correct
size. Without this the host GSO is not used as we end up breaking up large
segments into small MSS sized segments before writing the packets to the
host.
b) The check to not split a segment due to it not fitting in the receiver window
when there are pending segments is incorrect as segments in writeList can be
really large as we just take the write call's buffer size and create a single
large segment. So a write of say 128KB will just be 1 segment in the
writeList.
The linux code checks if 1 MSS sized segments fits in the receiver's window
and if not then does not split the current segment. gVisor's check was
incorrect that it was checking if the whole segment which could be >>> 1 MSS
would fit in the receiver's window. This was causing us to prematurely stop
sending and falling back to retransmit timer/probe from the other end to send
data.
This was seen when running HTTPD benchmarks where @ HEAD when sending large
files the benchmark was taking forever to run.
The tcp_splitseg_mss_test.go is being deleted as the test as written doesn't
test what is intended correctly. This is because GSO is enabled by default and
the reason the MSS+1 sized segment is sent is because GSO is in use. A proper
test will require disabling GSO on linux and netstack which is going to take a
bit of work in packetimpact to do it correctly.
Separately a new test probably should be written that verifies that a segment >
availableWindow is not split if the availableWindow is < 1 MSS.
Fixes #3107
PiperOrigin-RevId: 319172089
|
|
We were truncating buf using a index relative to the middle of the slice (i.e.
where envv begins), but we need to calculate the index relative to the entire
slice.
Updates #2923.
PiperOrigin-RevId: 319154950
|
|
Updates #2923.
PiperOrigin-RevId: 319153792
|
|
PiperOrigin-RevId: 319143410
|