Age | Commit message (Collapse) | Author |
|
When the neighbor table already has link address for a neighbor but is
trying to confirm reachability, it may send unicast probes to the
neighbor.
PiperOrigin-RevId: 336166711
|
|
It was originally set to 30s for IPv6 (same as IPv4) but this is not
what RFC 8200 prescibes. Linux also defaults to 60s [1].
[1] https://github.com/torvalds/linux/blob/47ec5303d73ea344e84f46660fff693c57641386/include/net/ipv6.h#L456
PiperOrigin-RevId: 336034636
|
|
This change also adds support to go_stateify for detecting an appropriate
receiver name, avoiding a large number of false positives.
PiperOrigin-RevId: 335994587
|
|
PiperOrigin-RevId: 335930035
|
|
By using TSC scaling as a hack, we can trick the kernel into setting an offset
of exactly zero. Huzzah!
PiperOrigin-RevId: 335922019
|
|
...per RFC 4861 s7.1.1.
PiperOrigin-RevId: 335742851
|
|
Most of the IPv4 fragmentation code was moved in the fragmentation
package and it is reused by IPv6 fragmentation.
Test:
- pkg/tcpip/network/ipv4:ipv4_test
- pkg/tcpip/network/ipv6:ipv6_test
- pkg/tcpip/network/fragmentation:fragmentation_test
Fixes #4389
PiperOrigin-RevId: 335714280
|
|
Updates #267
PiperOrigin-RevId: 335713923
|
|
PiperOrigin-RevId: 335709552
|
|
PiperOrigin-RevId: 335583637
|
|
The IPv4 RFCs are specific (though obtuse) that an echo response
packet needs to contain all the options from the echo request,
much as if it been routed back to the sender, though apparently
with a new TTL. They suggest copying the incoming packet header
to achieve this so that is what this patch does.
PiperOrigin-RevId: 335559176
|
|
PiperOrigin-RevId: 335548610
|
|
PiperOrigin-RevId: 335532690
|
|
Updates #1487
PiperOrigin-RevId: 335516732
|
|
PiperOrigin-RevId: 335492800
|
|
We can get the network endpoint directly from the NIC.
This is a preparatory CL for when a Route needs to hold a dedicated NIC
as its output interface. This is because when forwarding is enabled,
packets may be sent from a NIC different from the NIC a route's local
address is associated with.
PiperOrigin-RevId: 335484500
|
|
- When the KCOV_ENABLE_TRACE ioctl is called with the trace kind KCOV_TRACE_PC,
the kcov mode should be set to KCOV_*MODE*_TRACE_PC.
- When the owning task of kcov exits, the memory mapping should not be cleared
so it can be used by other tasks.
- Add more tests (also tested on native Linux kcov).
PiperOrigin-RevId: 335202585
|
|
Before we thought that interrupts are always disabled in the kernel
space, but here is a case when goruntime switches on a goroutine which
has been saved in the host mode. On restore, the popf instruction is
used to restore flags and this means that all flags what the goroutine
has in the host mode will be restored in the kernel mode. And in the
host mode, interrupts are always enabled.
The long story short, we can't use the IF flag for determine whether a
tasks is running in user or kernel mode.
This patch reworks the code so that in userspace, the first bit of the
IOPL flag will be always set. This doesn't give any new privilidges for
a task because CPL in userspace is always 3. But then we can use this
flag to distinguish user and kernel modes. The IOPL flag is never set in
the kernel and host modes.
Reported-by: syzbot+5036b325a8eb15c030cf@syzkaller.appspotmail.com
Reported-by: syzbot+034d580e89ad67b8dc75@syzkaller.appspotmail.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
|
|
PiperOrigin-RevId: 335077195
|
|
We are currently tracking the minimum RTT for RACK as smoothed RTT. As per RFC
minimum RTT can be a global minimum of all RTTs or filtered value of recent
RTT measurements. In this cl minimum RTT is updated to global minimum of all
RTTs for the connection.
PiperOrigin-RevId: 335061518
|
|
PiperOrigin-RevId: 335051794
|
|
When a child's root hash or its Merkle path is modified in its parent's
Merkle tree file, opening the file should fail, provided the directory
is verity enabled. The test for this behavior is added.
PiperOrigin-RevId: 334963690
|
|
PiperOrigin-RevId: 334721453
|
|
Adds support for the IPv6-compatible redirect target. Redirection is a limited
form of DNAT, where the destination is always the localhost.
Updates #3549.
PiperOrigin-RevId: 334698344
|
|
Before this change, OutgoingPacketErrors was incremented in the
stack.Route methods. This was going to be a problem once
IPv4/IPv6 WritePackets support fragmentation because Route.WritePackets
might now know how many packets are left after an error occurs.
Test:
- pkg/tcpip/network/ipv4:ipv4_test
- pkg/tcpip/network/ipv6:ipv6_test
PiperOrigin-RevId: 334687983
|
|
PiperOrigin-RevId: 334682753
|
|
PiperOrigin-RevId: 334678513
|
|
PiperOrigin-RevId: 334674481
|
|
Add code in IPv6 to send ICMP packets while processing extension headers.
Add some accounting in processing IPV6 Extension headers which
allows us to report meaningful information back in ICMP parameter
problem packets.
IPv4 also needs to send a message when an unsupported protocol
is requested.
Add some tests to generate both ipv4 and ipv6 packets with
various errors and check the responses.
Add some new checkers and cleanup some inconsistencies in
the messages in that file.
Add new error types for the ICMPv4/6 generators.
Fix a bug in the ICMPv4 generator that stopped it from generating
"Unknown protocol" messages.
Updates #2211
PiperOrigin-RevId: 334661716
|
|
PiperOrigin-RevId: 334656292
|
|
PiperOrigin-RevId: 334652998
|
|
The tests confirms that when a file is opened in verity, the
corresponding Merkle trees are generated. Also a normal read succeeds on
verity enabled files, but fails if either the verity file or the Merkle
tree file is modified.
PiperOrigin-RevId: 334640331
|
|
PiperOrigin-RevId: 334535896
|
|
PiperOrigin-RevId: 334531794
|
|
Test: stack_test.TestGetMainNICAddressWhenNICDisabled
PiperOrigin-RevId: 334513286
|
|
- Rewrite arch.Stack.{Push,Pop}. For the most part, stack now
implements marshal.CopyContext and can be used as the target of
marshal operations. Stack.Push had some extra logic for
automatically null-terminating slices. This was only used for two
specific types of slices, and is now handled explicitly.
- Delete usermem.CopyObject{In,Out}.
- Replace most remaining uses of the encoding/binary package with
go-marshal. Most of these were using the binary package to compute
the size of a struct, which go-marshal can directly replace. ~3 uses
of the binary package remain. These aren't reasonably replaceable by
go-marshal: for example one use is to construct the syscall
trampoline for systrap.
- Fill out remaining convenience wrappers in the primitive package.
PiperOrigin-RevId: 334502375
|
|
As per relevant IP RFCS (see code comments), broadcast (for IPv4) and
multicast addresses are not allowed. Currently checks for these are
done at the transport layer, but since it is explicitly forbidden at
the IP layers, check for them there.
This change also removes the UDP.InvalidSourceAddress stat since there
is no longer a need for it.
Test: ip_test.TestSourceAddressValidation
PiperOrigin-RevId: 334490971
|
|
PiperOrigin-RevId: 334478850
|
|
Like matchers, targets should use a module-like register/lookup system. This
replaces the brittle switch statements we had before.
The only behavior change is supporing IPT_GET_REVISION_TARGET. This makes it
much easier to add IPv6 redirect in the next change.
Updates #3549.
PiperOrigin-RevId: 334469418
|
|
Linux doesn't generate a link-local address for the loopback interface.
Test: integration_test.TestInitialLoopbackAddresses
PiperOrigin-RevId: 334453182
|
|
PiperOrigin-RevId: 334428344
|
|
Currently expired IP fragments are discarded only if another fragment for the
same IP datagram is received after timeout or the total size of the fragment
queue exceeded a predefined value.
Test: fragmentation.TestReassemblingTimeout
Fixes #3960
PiperOrigin-RevId: 334423710
|
|
Currently there is a problem with the preservation of usr-tls, which leads
to the contamination of sentry tls.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
* Remove Capabilities and NICID methods from NetworkEndpoint.
* Remove linkEP and stack parameters from NetworkProtocol.NewEndpoint.
The LinkEndpoint can be fetched from the NetworkInterface. The stack
is passed to the NetworkProtocol when it is created so the
NetworkEndpoint can get it from its protocol.
* Remove stack parameter from TransportProtocol.NewEndpoint.
Like the NetworkProtocol/Endpoint, the stack is passed to the
TransportProtocol when it is created.
PiperOrigin-RevId: 334332721
|
|
* Add network address to network endpoints.
Hold network-specific state in the NetworkEndpoint instead of the stack.
This results in the stack no longer needing to "know" about the network
endpoints and special case certain work for various endpoints
(e.g. IPv6 DAD).
* Provide NetworkEndpoints with an NetworkInterface interface.
Instead of just passing the NIC ID of a NIC, pass an interface so the
network endpoint may query other information about the NIC such as
whether or not it is a loopback device.
* Move NDP code and state to the IPv6 package.
NDP is IPv6 specific so there is no need for it to live in the stack.
* Control forwarding through NetworkProtocols instead of Stack
Forwarding should be controlled on a per-network protocol basis so
forwarding configurations are now controlled through network protocols.
* Remove stack.referencedNetworkEndpoint.
Now that addresses are exposed via AddressEndpoint and only one
NetworkEndpoint is created per interface, there is no need for a
referenced NetworkEndpoint.
* Assume network teardown methods are infallible.
Fixes #3871, #3916
PiperOrigin-RevId: 334319433
|
|
In TestReceiveBufferAutoTuning we now send a keep-alive packet to measure the
current window rather than a 1 byte segment as the returned window value in the
latter case is reduced due to the 1 byte segment now being held in the receive
buffer and can cause the test to flake if the segment overheads were to change.
In getSendParams in rcv.go we were advertising a non-zero window even if
available window space was zero after we received the previous segment. In such
a case newWnd and curWnd will be the same and we end up advertising a tiny but
non-zero window and this can cause the next segment to be dropped.
PiperOrigin-RevId: 334314070
|
|
arm64 vfs2: Add support for io_submit/fallocate/
sendfile/newfstatat/readahead/fadvise64
Signed-off-by: Howard Zhang <howard.zhang@arm.com>
|
|
PiperOrigin-RevId: 334263322
|
|
When the socket is set with SO_LINGER and close()'d in the initial state, it
should not linger and return immediately.
PiperOrigin-RevId: 334263149
|
|
Network or transport protocols may want to reach the stack. Support this
by letting the stack create the protocol instances so it can pass a
reference to itself at protocol creation time.
Note, protocols do not yet use the stack in this CL but later CLs will
make use of the stack from protocols.
PiperOrigin-RevId: 334260210
|