Age | Commit message (Collapse) | Author |
|
Fixes #1490
Fixes #1495
PiperOrigin-RevId: 289523250
|
|
PiperOrigin-RevId: 289479774
|
|
PiperOrigin-RevId: 289169518
|
|
CancellableTimer tests were in a timer_test package but lived within the
tcpip directory. This caused issues with go tools.
PiperOrigin-RevId: 289166345
|
|
Allows retrieving the goroutine ID for concurrency testing when the race
detector is enabled.
Updates #1472
PiperOrigin-RevId: 289155308
|
|
This is a band-aid fix for now to prevent panics.
PiperOrigin-RevId: 289078453
|
|
* Rename syncutil to sync.
* Add aliases to sync types.
* Replace existing usage of standard library sync package.
This will make it easier to swap out synchronization primitives. For example,
this will allow us to use primitives from github.com/sasha-s/go-deadlock to
check for lock ordering violations.
Updates #1472
PiperOrigin-RevId: 289033387
|
|
PiperOrigin-RevId: 289019953
|
|
Inform the Stack's NDPDispatcher when it receives an NDP Router Advertisement
that updates the available configurations via DHCPv6. The Stack makes sure that
its NDPDispatcher isn't informed unless the avaiable configurations via DHCPv6
for a NIC is updated.
Tests: Test that a Stack's NDPDispatcher is informed when it receives an NDP
Router Advertisement that informs it of new configurations available via DHCPv6.
PiperOrigin-RevId: 289001283
|
|
Internal tools timeout after 60s during tests that are required to pass before
changes can be submitted. Separate out NDP tests into its own package to help
prevent timeouts when testing.
PiperOrigin-RevId: 288990597
|
|
PiperOrigin-RevId: 288965915
|
|
This makes it possible to call the sockopt from go even when the NIC has no
name.
PiperOrigin-RevId: 288955236
|
|
...retrievable later via stack.NICInfo().
Clients of this library can use it to add metadata that should be tracked
alongside a NIC, to avoid having to keep a map[tcpip.NICID]metadata mirroring
stack.Stack's nic map.
PiperOrigin-RevId: 288924900
|
|
Add a new CancellableTimer type to encapsulate the work of safely stopping
timers when it fires at the same time some "related work" is being handled. The
term "related work" is some work that needs to be done while having obtained
some common lock (L).
Example: Say we have an invalidation timer that may be extended or cancelled by
some event. Creating a normal timer and simply cancelling may not be sufficient
as the timer may have already fired when the event handler attemps to cancel it.
Even if the timer and event handler obtains L before doing work, once the event
handler releases L, the timer will eventually obtain L and do some unwanted
work.
To prevent the timer from doing unwanted work, it checks if it should early
return instead of doing the normal work after obtaining L. When stopping the
timer callers must have L locked so the timer can be safely informed that it
should early return.
Test: Tests that CancellableTimer fires and resets properly. Test to make sure
the timer fn is not called after being stopped within the lock L.
PiperOrigin-RevId: 288806984
|
|
|
|
This change calls a new Truncate method on the EndpointReader in RecvMsg for
both netlink and unix sockets. This allows readers such as sockets to peek at
the length of data without actually reading it to a buffer.
Fixes #993 #1240
PiperOrigin-RevId: 288800167
|
|
PiperOrigin-RevId: 288799694
|
|
|
|
Panic found by syzakller.
PiperOrigin-RevId: 288799046
|
|
...and port V6OnlyOption to it.
PiperOrigin-RevId: 288789451
|
|
PiperOrigin-RevId: 288779416
|
|
PiperOrigin-RevId: 288772878
|
|
PiperOrigin-RevId: 288743614
|
|
|
|
|
|
Updates #1195
PiperOrigin-RevId: 288725745
|
|
PacketLooping is already a member on the passed Route.
PiperOrigin-RevId: 288721500
|
|
This gets us closer to passing the iptables tests and opens up iptables
so it can be worked on by multiple people.
A few restrictions are enforced for security (i.e. we don't want to let
users write a bunch of iptables rules and then just not enforce them):
- Only the filter table is writable.
- Only ACCEPT rules with no matching criteria can be added.
|
|
...enabling us to remove the "CreateNamedLoopbackNIC" variant of
CreateNIC and all the plumbing to connect it through to where the value
is read in FindRoute.
PiperOrigin-RevId: 288713093
|
|
Before, each of small read()'s that raises window either from zero
or above threshold of aMSS, would generate an ACK. In a classic
silly-window-syndrome scenario, we can imagine a pessimistic case
when small read()'s generate a stream of ACKs.
This PR fixes that, essentially treating window size < aMSS as zero.
We send ACK exactly in a moment when window increases to >= aMSS
or half of receive buffer size (whichever smaller).
|
|
PiperOrigin-RevId: 288642552
|
|
Support deprecating network endpoints on a NIC. If an endpoint is deprecated, it
should not be used for new connections unless a more preferred endpoint is not
available, or unless the deprecated endpoint was explicitly requested.
Test: Test that deprecated endpoints are only returned when more preferred
endpoints are not available and SLAAC addresses are deprecated after its
preferred lifetime
PiperOrigin-RevId: 288562705
|
|
When receiving data, netstack avoids sending spurious acks. When
user does recv() should netstack send ack telling the sender that
the window was increased? It depends. Before this patch, netstack
_will_ send the ack in the case when window was zero or window >>
scale was zero. Basically - when recv space increased from zero.
This is not working right with silly-window-avoidance on the sender
side. Some network stacks refuse to transmit segments, that will fill
the window but are below MSS. Before this patch, this confuses
netstack. On one hand if the window was like 3 bytes, netstack
will _not_ send ack if the window increases. On the other hand
sending party will refuse to transmit 3-byte packet.
This patch changes that, making netstack will send an ACK when
the available buffer size increases to or above 1*MSS. This will
inform other party buffer is large enough, and hopefully uncork it.
Signed-off-by: Marek Majkowski <marek@cloudflare.com>
|
|
Test: Test that an IPv6 link-local address is not auto-generated for loopback
NICs, even when it is enabled for non-loopback NICS.
PiperOrigin-RevId: 288519591
|
|
Pass the NIC-internal name to the NIC name function when generating opaque IIDs
so implementations can use the name that was provided when the NIC was created.
Previously, explicit NICID to NIC name resolution was required from the netstack
integrator.
Tests: Test that the name provided when creating a NIC is passed to the NIC name
function when generating opaque IIDs.
PiperOrigin-RevId: 288395359
|
|
Right now, we need to call ptrace(PTRACE_SYSCALL) and wait() twice to execute
one system call in a stub process. With these changes, we will need to call
ptrace + wait only once.
In addition, this allows to workaround the kernel bug when a stub process
doesn't stop on syscall-exit-stop and starts executing the next system call.
Reported-by: syzbot+37143cafa8dc3b5008ee@syzkaller.appspotmail.com
PiperOrigin-RevId: 288393029
|
|
- Renamed memfs to tmpfs.
- Copied fileRangeSet bits from fs/fsutil/ to fsimpl/tmpfs/
- Changed tmpfs to be backed by filemem instead of byte slice.
- regularFileReadWriter uses a sync.Pool, similar to gofer client.
PiperOrigin-RevId: 288356380
|
|
PiperOrigin-RevId: 288342928
|
|
Currently, shm.Registry.FindByID will return Shm instances without taking an
additional reference on them, making it possible for them to disappear.
More explicitly handle references. All callers hold a reference for the
duration that they hold the instance. Registry.shms may transitively hold Shms
with no references, so it must TryIncRef to determine if they are still valid.
PiperOrigin-RevId: 288314529
|
|
Support using opaque interface identifiers when generating IPv6 addresses via
SLAAC when configured to do so.
Note, this change does not handle retries in response to DAD conflicts yet.
That will also come in a later change.
Test: Test that when SLAAC addresses are generated, they use opaque interface
identifiers when configured to do so.
PiperOrigin-RevId: 288078605
|
|
PiperOrigin-RevId: 288075400
|
|
Support generating opaque interface identifiers as defined by RFC 7217 for
auto-generated IPv6 link-local addresses. Opaque interface identifiers will also
be used for IPv6 addresses auto-generated via SLAAC in a later change.
Note, this change does not handle retries in response to DAD conflicts yet.
That will also come in a later change.
Tests: Test that when configured to generated opaque IIDs, they are properly
generated as outlined by RFC 7217.
PiperOrigin-RevId: 288035349
|
|
- Add FileDescriptionOptions.UseDentryMetadata, which reduces the amount of
boilerplate needed for device FDs and the like between filesystems.
- Switch back to having FileDescription.Init() take references on the Mount and
Dentry; otherwise managing refcounts around failed calls to
OpenDeviceSpecialFile() / Device.Open() is tricky.
PiperOrigin-RevId: 287575574
|
|
Updates #1195
PiperOrigin-RevId: 287269106
|
|
Updates #1195
PiperOrigin-RevId: 287227722
|
|
PiperOrigin-RevId: 287225250
|
|
PiperOrigin-RevId: 287221280
|
|
PiperOrigin-RevId: 287217899
|
|
Added the ability to get/set the IP_RECVTOS socket option on UDP endpoints. If
enabled, TOS from the incoming Network Header passed as ancillary data in the
ControlMessages.
Test:
* Added unit test to udp_test.go that tests getting/setting as well as
verifying that we receive expected TOS from incoming packet.
* Added a syscall test
PiperOrigin-RevId: 287029703
|
|
There are 2 jobs have been finished in this patch:
1, a comment was added to explain the purpose of the extra NOPs in Vectors().
2, some merge errors were fixed.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|