summaryrefslogtreecommitdiffhomepage
path: root/pkg
AgeCommit message (Collapse)Author
2021-01-20Remove unimplemented message for SO_LINGERNayana Bidari
- Removes the unimplemented message for SO_LINGER - Fix the length for IP_PKTINFO option PiperOrigin-RevId: 352917611
2021-01-20Don't use task goroutine context in fsimpl tests.Jamie Liu
PiperOrigin-RevId: 352908368
2021-01-20Move Lock/UnlockPOSIX into LockFD util.Dean Deng
PiperOrigin-RevId: 352904728
2021-01-20Fix refcount increments in gofer.filesystem.Sync.Jamie Liu
Fixes #5263 PiperOrigin-RevId: 352903844
2021-01-20Remove string allocation from strings.Repeat() in /proc/[pid]/maps.Jamie Liu
PiperOrigin-RevId: 352894106
2021-01-20Change the way the IP options report problemsJulian Elischer
The error messages are not needed or used as these are not processing errors so much as errors to be reported back to the packet sender. Implicitly describe whether each error should generate ICMP packets or not. Most do but there are a couple that do not. Slightly alter some test expectations for Linux compatibility and add a couple more. Improve Linux compatibility on error packet returns. Some cosmetic changes to tests to match the upcoming packet impact version of the same tests. PiperOrigin-RevId: 352889785
2021-01-19Do not have a stack-wide linkAddressCacheGhanan Gowripalan
Link addresses are cached on a per NIC basis so instead of having a single cache that includes the NIC ID for neighbor entry lookups, use a single cache per NIC. PiperOrigin-RevId: 352684111
2021-01-19platform/ptrace: workaround a kernel ptrace issue on ARM64Andrei Vagin
On ARM64, when ptrace stops on a system call, it uses the x7 register to indicate whether the stop has been signalled from syscall entry or syscall exit. This means that we can't get a value of this register and we can't change it. More details are in the comment for tracehook_report_syscall in arch/arm64/kernel/ptrace.c. This happens only if we stop on a system call, so let's queue a signal, resume a stub thread and catch it on a signal handling. Fixes: #5238 PiperOrigin-RevId: 352668695
2021-01-19Per NIC NetworkEndpoint statisticsArthur Sfez
To facilitate the debugging of multi-homed setup, track Network protocols statistics for each endpoint. Note that the original stack-wide stats still exist. A new type of statistic counter is introduced, which track two versions of a stat at the same time. This lets a network endpoint increment both the local stat and the stack-wide stat at the same time. Fixes #4605 PiperOrigin-RevId: 352663276
2021-01-19Drop CheckLocalAddress from LinkAddressCacheGhanan Gowripalan
PiperOrigin-RevId: 352623277
2021-01-17Do not use a stack-wide queue of pending packetsGhanan Gowripalan
Packets may be pending on link resolution to complete before being sent. Link resolution is performed for neighbors which are unique to a NIC so hold link resolution related state under the NIC, not the stack. Note, this change may result in more queued packets but that is okay as RFC 4861 section 7.2.2 recommends that the stack maintain a queue of packets for each neighbor that is waiting for link resolution to complete, not a fixed limit per stack. PiperOrigin-RevId: 352322155
2021-01-15Resolve known link address on route creationGhanan Gowripalan
If a Route is being created through a link that requires link address resolution and a remote address that has a known mapping to a link address, populate the link address when the route is created. This removes the need for neighbor/link address caches to perform this check. Fixes #5149 PiperOrigin-RevId: 352122401
2021-01-15Support GetLinkAddress with neighborCacheGhanan Gowripalan
Test: integration_test.TestGetLinkAddress PiperOrigin-RevId: 352119404
2021-01-15Only pass stack.Route's fields to LinkEndpointsGhanan Gowripalan
stack.Route is used to send network packets and resolve link addresses. A LinkEndpoint does not need to do either of these and only needs the route's fields at the time of the packet write request. Since LinkEndpoints only need the route's fields when writing packets, pass a stack.RouteInfo instead. PiperOrigin-RevId: 352108405
2021-01-15Remove count argument from tcpip.Endpoint.ReadTamir Duberstein
The same intent can be specified via the io.Writer. PiperOrigin-RevId: 352098747
2021-01-15[rack] Retransmit the probe segment after the probe timer expires.Ayush Ranjan
This change implements TLP details enumerated in https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.5.2. Fixes #5084 PiperOrigin-RevId: 352093473
2021-01-15Correctly return EMSGSIZE when packet is too big in raw socket.Ting-Yu Wang
IPv4 previously accepts the packet, while IPv6 panics. Neither is the behavior in Linux. splice() in Linux has different behavior than in gVisor. This change documents it in the SpliceTooLong test. Reported-by: syzbot+b550e78e5c24d1d521f2@syzkaller.appspotmail.com PiperOrigin-RevId: 352091286
2021-01-15Populate EgressRoute, GSO, Netproto for batch writesGhanan Gowripalan
We loop over the list of packets anyways so setting these aren't expensive. Now that they are populated only by the link endpoint that uses them, TCP does not need to. PiperOrigin-RevId: 352090853
2021-01-15Combine reference count logs into one message.Dean Deng
Otherwise, races can occur between concurrent logs. PiperOrigin-RevId: 352086914
2021-01-15Add sanity check on return values from WriteTing-Yu Wang
io.Writer.Write requires err to be non-nil if n < len(v). We could allow this but it will be irreversible if users depend on this behavior. Ported the test that discovered this. PiperOrigin-RevId: 352065946
2021-01-15Merge pull request #5237 from travigd:add-containerd-pausegVisor bot
PiperOrigin-RevId: 352032380
2021-01-14Simplify the pipe implementation.Jamie Liu
- Remove the pipe package's dependence on the buffer package, which becomes unused as a result. The buffer package is currently intended to serve two use cases, pipes and temporary buffers, and does neither optimally as a result; this change facilitates retooling the buffer package to better serve the latter. - Pass callbacks taking safemem.BlockSeq to the internal pipe I/O methods, which makes most callbacks trivial. - Fix VFS1's splice() and tee() to immediately return if a pipe returns a partial write. PiperOrigin-RevId: 351911375
2021-01-14Add stats for ARPArthur Sfez
Fixes #4963 Startblock: has LGTM from sbalana and then add reviewer ghanan PiperOrigin-RevId: 351886320
2021-01-14Check for existence before permissionsFabricio Voznika
Return EEXIST when overwritting a file as long as the caller has exec permission on the parent directory, even if the caller doesn't have write permission. Also reordered the mount write check, which happens before permission is checked. Closes #5164 PiperOrigin-RevId: 351868123
2021-01-14Remove impossible errorsTamir Duberstein
Commit 25b5ec7 moved link address resolution out of the transport layer; special handling of link address resolution is no longer necessary in tcp. PiperOrigin-RevId: 351839254
2021-01-13Clear neighbor table on NIC downGhanan Gowripalan
Note, this includes static entries to match linux's behaviour. ``` $ ip neigh show dev eth0 192.168.42.1 lladdr fc:ec:da:70:6e:f9 STALE $ sudo ip neigh add 192.168.42.172 lladdr 22:33:44:55:66:77 dev eth0 $ ip neigh show dev eth0 192.168.42.1 lladdr fc:ec:da:70:6e:f9 STALE 192.168.42.172 lladdr 22:33:44:55:66:77 PERMANENT $ sudo ifconfig eth0 down $ ip neigh show dev eth0 $ sudo ifconfig eth0 up $ ip neigh show dev eth0 ``` Test: stack_test.TestClearNeighborCacheOnNICDisable PiperOrigin-RevId: 351696306
2021-01-13Do not resolve remote link address at transport layerGhanan Gowripalan
Link address resolution is performed at the link layer (if required) so we can defer it from the transport layer. When link resolution is required, packets will be queued and sent once link resolution completes. If link resolution fails, the transport layer will receive a control message indicating that the stack failed to route the packet. tcpip.Endpoint.Write no longer returns a channel now that writes do not wait for link resolution at the transport layer. tcpip.ErrNoLinkAddress is no longer used so it is removed. Removed calls to stack.Route.ResolveWith from the transport layer so that link resolution is performed when a route is created in response to an incoming packet (e.g. to complete TCP handshakes or send a RST). Tests: - integration_test.TestForwarding - integration_test.TestTCPLinkResolutionFailure Fixes #4458 RELNOTES: n/a PiperOrigin-RevId: 351684158
2021-01-13Switch uses of os.Getenv that check for empty string to os.LookupEnv.Dean Deng
Whether the variable was found is already returned by syscall.Getenv. os.Getenv drops this value while os.Lookupenv passes it along. PiperOrigin-RevId: 351674032
2021-01-13testutil: Create a `multiLogger` that logs to multiple `Loggers`.Etienne Perot
This is useful when using the shell library in order to log to both the test log and the standard logs. PiperOrigin-RevId: 351673465
2021-01-13Fix code review issuesTravis DePrato
2021-01-13Add support for pause/restore in containerd shimTravis DePrato
2021-01-13Merge pull request #4792 from lubinszARM:pr_kvm_testgVisor bot
PiperOrigin-RevId: 351638451
2021-01-13Clean up the dummy network interface used by UDP testsArthur Sfez
It is now composed by a NetworkInterface interface which lets us delete the methods we don't need. PiperOrigin-RevId: 351613267
2021-01-13Human-readable metric emit logsMichael Pratt
Rather than dumping metrics on a single line, nearly unrelated textproto, print them in alphabetical order, each on their own line. e.g., D0108 17:42:42.198216 3382465 metric.go:253] Emitting metrics: D0108 17:42:42.198240 3382465 metric.go:255] /fs/opens: &{Uint64Value:22} D0108 17:42:42.198271 3382465 metric.go:255] /fs/read_wait: &{Uint64Value:0} D0108 17:42:42.198294 3382465 metric.go:255] /fs/reads: &{Uint64Value:26} D0108 17:42:42.198319 3382465 metric.go:255] /gofer/opened_write_execute_file: &{Uint64Value:0} D0108 17:42:42.198327 3382465 metric.go:255] /gofer/opens_9p: &{Uint64Value:0} D0108 17:42:42.198340 3382465 metric.go:255] /gofer/opens_host: &{Uint64Value:20} ... PiperOrigin-RevId: 351590340
2021-01-13[rack] TLP: Recovery detection.Ayush Ranjan
This change implements TLP details enumerated in https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.6 Fixes #5131 PiperOrigin-RevId: 351558449
2021-01-12Drop TransportEndpointID from HandleControlPacketGhanan Gowripalan
When a control packet is delivered, it is delivered to a transport endpoint with a matching stack.TransportEndpointID so there is no need to pass the ID to the endpoint as it already knows its ID. PiperOrigin-RevId: 351497588
2021-01-12Remove unnecessary closureTamir Duberstein
PiperOrigin-RevId: 351491836
2021-01-12Remove useless cached stateTamir Duberstein
Simplify some logic while I'm here. PiperOrigin-RevId: 351491593
2021-01-12Delete shim v1Fabricio Voznika
gvisor-containerd-shim is not compatible with containerd 1.1 or earlier. Starting from containerd 1.2, shim v2 is the preferred interface. PiperOrigin-RevId: 351485556
2021-01-12[rack] Set up TLP timer and configure timeout.Ayush Ranjan
This change implements TLP details enumerated in https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.5.1. Fixes #5083 PiperOrigin-RevId: 351467357
2021-01-12Fix simple mistakes identified by goreportcard.Adin Scannell
These are primarily simplification and lint mistakes. However, minor fixes are also included and tests added where appropriate. PiperOrigin-RevId: 351425971
2021-01-11Fix Go branch for arm64.Adin Scannell
This requires several changes: * Templates must preserve relevant tags. * Pagetables templates are split into two targets, each preserving tags. * The binary VDSO is similarly split into two targets, with some juggling. * The top level tools/go_branch.sh now does a crossbuild of ARM64 as well, and checks and merges the results of the two branches together. Fixes #5178 PiperOrigin-RevId: 351304330
2021-01-11Make segment range type split safe.Adin Scannell
This allows for use in restricted contexts. Updates #5039 PiperOrigin-RevId: 351265378
2021-01-11Make ilist split safe.Adin Scannell
This allows for use in restricted contexts. Updates #5039 PiperOrigin-RevId: 351220385
2021-01-08Merge pull request #4933 from lubinszARM:pr_kvm_el0_exceptionsgVisor bot
PiperOrigin-RevId: 350862699
2021-01-08Create console test library.Etienne Perot
This creates a TTY pair and runs `/bin/sh` in interactive mode within it. It provides useful helper functions to interact with the shell and read the output of commands run within it. This is meant to be used for testing upcoming changes allowing `runsc exec` to work in `-detach=false -tty=true` mode. PiperOrigin-RevId: 350841006
2021-01-07Merge pull request #5207 from avagin:arm64-crossgVisor bot
PiperOrigin-RevId: 350691246
2021-01-07netstack: Refactor tcpip.Endpoint.ReadTing-Yu Wang
Read now takes a destination io.Writer, count, options. Keeping the method name Read, in contrast to the Write method. This enables: * direct transfer of views under VV * zero copy It also eliminates the need for sentry to keep a slice of view because userspace had requested a read that is smaller than the view returned, removing the complexity there. Read/Peek/ReadPacket are now consolidated together and some duplicate code is removed. PiperOrigin-RevId: 350636322
2021-01-07Implement the semtimedop syscallAndrei Vagin
Signed-off-by: Andrei Vagin <avagin@gmail.com>
2021-01-06Do not filter frames in ethernet link endpointGhanan Gowripalan
Ethernet frames are usually filtered at the hardware-level so there is no need to filter the frames in software. For test purposes, a new link endpoint was introduced to filter frames based on their destination. PiperOrigin-RevId: 350422941
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 12:58:13 +0000