summaryrefslogtreecommitdiffhomepage
path: root/pkg
AgeCommit message (Collapse)Author
2020-09-15Merge release-20200907.0-53-g8b15effd9 (automated)gVisor bot
2020-09-15Improve syserror_test.Jamie Liu
- It's very difficult to prevent returnErrnoAsError and returnError from being optimized out. Instead, replace BenchmarkReturn* with BenchmarkAssign*, which store to globalError. - Compare to a non-nil globalError in BenchmarkCompare* and BenchmarkSwitch*. New results: BenchmarkAssignErrno BenchmarkAssignErrno-12 1000000000 0.615 ns/op BenchmarkAssignError BenchmarkAssignError-12 1000000000 0.626 ns/op BenchmarkCompareErrno BenchmarkCompareErrno-12 1000000000 0.522 ns/op BenchmarkCompareError BenchmarkCompareError-12 1000000000 3.54 ns/op BenchmarkSwitchErrno BenchmarkSwitchErrno-12 1000000000 1.45 ns/op BenchmarkSwitchError BenchmarkSwitchError-12 536315757 10.9 ns/op PiperOrigin-RevId: 331875387
2020-09-15Merge release-20200907.0-52-g456c6c33e (automated)gVisor bot
2020-09-15Invert dependency between the context and amutex packages.Jamie Liu
This is to allow the syserror package to depend on the context package in a future change. PiperOrigin-RevId: 331866252
2020-09-15Merge release-20200907.0-51-ga004f0d08 (automated)gVisor bot
2020-09-15Support setting STATX_SIZE for kernfs.InodeAttrs.Dean Deng
Make setting STATX_SIZE a no-op, if it is valid for the given permissions and file type. Also update proc tests, which were overfitted before. Fixes #3842. Updates #1193. PiperOrigin-RevId: 331861087
2020-09-15Merge release-20200907.0-50-g72a30b114 (automated)gVisor bot
2020-09-15Move reusable IPv4 test code into a testutil module and refactor itArthur Sfez
The refactor aims to simplify the package, by replacing the Go channel with a PacketBuffer slice. This code will be reused by tests for IPv6 fragmentation. PiperOrigin-RevId: 331860411
2020-09-15Merge release-20200907.0-49-g7f89a26e1 (automated)gVisor bot
2020-09-15Merge release-20200907.0-48-g0d790cbae (automated)gVisor bot
2020-09-15Merge release-20200907.0-47-g86b31a807 (automated)gVisor bot
2020-09-15Release FDTable lock before dropping the fds.Nayana Bidari
This is needed for SO_LINGER, where close() is blocked for linger timeout and we are holding the FDTable lock for the entire timeout which will not allow us to create/delete other fds. We have to release the locks and then drop the fds. PiperOrigin-RevId: 331844185
2020-09-15Read vfs2 epoll events atomically.Jamie Liu
Discovered by ayushranjan@: VFS2 was employing the following algorithm for fetching ready events from an epoll instance: - Create a statically sized EpollEvent slice on the stack of size 16. - Pass that to EpollInstance.ReadEvents() to populate. - EpollInstance.ReadEvents() requeues level-triggered events that it returns back into the ready queue. - Write the results to usermem. - If the number of results were = 16 then recall EpollInstance.ReadEvents() in the hopes of getting more. But this will cause duplication of the "requeued" ready level-triggered events. So if the ready queue has >= 16 ready events, the EpollWait for loop will spin until it fills the usermem with `maxEvents` events. Fixes #3521 PiperOrigin-RevId: 331840527
2020-09-15RFC: design for a 9P replacementJamie Liu
Tentatively `lisafs` (LInux SAndbox FileSystem). PiperOrigin-RevId: 331839246
2020-09-15Merge release-20200907.0-46-g84d48c0fd (automated)gVisor bot
2020-09-15Merge pull request #3895 from btw616:fix/issue-3894gVisor bot
PiperOrigin-RevId: 331824411
2020-09-15Merge release-20200907.0-44-gd3880b76c (automated)gVisor bot
2020-09-15Don't conclude broadcast from route destinationGhanan Gowripalan
The routing table (in its current) form should not be used to make decisions about whether a remote address is a broadcast address or not (for IPv4). Note, a destination subnet does not always map to a network. E.g. RouterA may have a route to 192.168.0.0/22 through RouterB, but RouterB may be configured with 4x /24 subnets on 4 different interfaces. See https://github.com/google/gvisor/issues/3938. PiperOrigin-RevId: 331819868
2020-09-15Fix proc.(*fdDir).IterDirents for VFS2Tiwei Bie
Currently the returned offset is an index, and we can't use it to find the next fd to serialize, because getdents should iterate correctly despite mutation of fds. Instead, we can return the next fd to serialize plus 2 (which accounts for "." and "..") as the offset. Fixes: #3894 Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
2020-09-14Merge release-20200907.0-43-g52ffeb2d6 (automated)gVisor bot
2020-09-14Add note about gofer link(2) limitationFabricio Voznika
PiperOrigin-RevId: 331648296
2020-09-14Merge release-20200907.0-42-g2747030ec (automated)gVisor bot
2020-09-14Store multicast memberships in a setTamir Duberstein
This is simpler and more performant. PiperOrigin-RevId: 331639978
2020-09-14Merge release-20200907.0-41-g05d2ebee5 (automated)gVisor bot
2020-09-14Test RST handling in TIME_WAIT.Mithun Iyer
gVisor stack ignores RSTs when in TIME_WAIT which is not the default Linux behavior. Add a packetimpact test to test the same. Also update code comments to reflect the rationale for the current gVisor behavior. PiperOrigin-RevId: 331629879
2020-09-14Merge release-20200907.0-40-g2969b1740 (automated)gVisor bot
2020-09-14Correct FDSize in /proc/[pid]/status.Jamie Liu
In Linux, FDSize is fs/proc/array.c:task_state() => struct fdtable::max_fds, which is set to the underlying array's length in fs/file.c:alloc_fdtable(). Follow-up changes: - Remove FDTable.GetRefs() and FDTable.GetRefsVFS2(), which are unused. - Reset FDTable.used to 0 during restore, since the subsequent calls to FDTable.setAll() increment it again, causing its value to be doubled. (After this CL, FDTable.used is only used to avoid reallocation in FDTable.GetFDs(), so this fix is not very visible.) PiperOrigin-RevId: 331588190
2020-09-14Merge release-20200907.0-39-g833ceb0f1 (automated)gVisor bot
2020-09-13Merge release-20200907.0-38-gb6ca96b9b (automated)gVisor bot
2020-09-12Cap reassembled IPv6 packets at 65535 octetsToshi Kikuchi
IPv4 can accept 65536-octet reassembled packets. Test: - ipv4_test.TestInvalidFragments - ipv4_test.TestReceiveFragments - ipv6.TestInvalidIPv6Fragments - ipv6.TestReceiveIPv6Fragments Fixes #3770 PiperOrigin-RevId: 331382977
2020-09-12Merge release-20200907.0-37-g3ca73841d (automated)gVisor bot
2020-09-11Move the 'marshal' and 'primitive' packages to the 'pkg' directory.Rahat Mahmood
PiperOrigin-RevId: 331256608
2020-09-11Merge release-20200810.0-237-g8d0f76dda (automated)gVisor bot
2020-09-11fuse_open: add padding to open out requestBoyuan He
2020-09-11Merge release-20200907.0-36-g1f4fb817c (automated)gVisor bot
2020-09-11Merge release-20200810.0-236-gb8bee78d0 (automated)gVisor bot
2020-09-11Unexport fusefs.inode.nodeIDCraig Chi
2020-09-11Implement FUSE_UNLINKboyuan-he
Fixes #3696
2020-09-11Fix comments of TODO issues.Craig Chi
2020-09-11Add FUSE umount supportjinmouil
This change implements Release for the FUSE filesystem and expected behaviors of the FUSE devices. It includes several checks for aborted connection in the path for making a request and a function to abort all the ongoing FUSE requests in order.
2020-09-11Fix FUSE_RELEASE protocol reply processingJinmou Li
This commit fixes the potential unexpected errors of original handling of FUSE_RELEASE responses while keep the same behavior (ignoring any reply).
2020-09-11Improve FUSE async/noreply call logicJinmou Li
This change adds bookkeeping variables for the FUSE request. With them, old insecure confusing code we used to process async requests is replaced by new clear compiling ones. Future code can take advantage of them to have better control of each requests.
2020-09-11Refactor FUSE connection for readability and structureJinmou Li
This change decouples the code that is weakly tied to the connection struct from connection.go, rename variables and files with more meaningful choices, adds detailed comments, explains lock orders, and adds other minor improvement to make the existing FUSE code more readable and more organized. Purpose is to avoid too much code in one file and provide better structure for the future commits.
2020-09-11Add comments for exported attributesCraig Chi
2020-09-11Implement FUSE_SETATTRCraig Chi
This commit implements FUSE_SETATTR command. When a system call modifies the metadata of a regular file or a folder by chown(2), chmod(2), truncate(2), utime(2), or utimes(2), they should be translated to corresponding FUSE_SETATTR command and sent to the FUSE server. Fixes #3332
2020-09-11Add fh support for revise attr and fstat(2) testCraig Chi
According to Linux 4.4's FUSE behavior, the flags and fh attributes in FUSE_GETATTR are only used in read, write, and lseek. fstat(2) doesn't use them either. Add tests to ensure the requests sent from FUSE module are consistent with Linux's. Updates #3655
2020-09-11Implement FUSE_WRITEJinmou Li
This commit adds basic write(2) support for FUSE.
2020-09-11Implement FUSE_CREATECraig Chi
FUSE_CREATE is called when issuing creat(2) or open(2) with O_CREAT. It creates a new file on the FUSE filesystem. Fixes #3825
2020-09-11FUSE device: clean up readLockedjinmouil
This change removes the unnecessary loop and avoids the recursive call. It also fixes minor bugs in this function.
2020-09-11Downgrade FUSE minor version support and clarify commentsjinmouil
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 03:36:11 +0000