Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 226018694
Change-Id: I98965e26fe565f37e98e5df5f997363ab273c91b
|
|
Connectionless Unix sockets (DGRAM Unix sockets created with the socket system
call) inherently only have a read queue. They do not establish bidirectional
connections, instead, the connect system call only sets a default send
location. Writes give the data to the other endpoint which has its own read
queue.
To simplify the code, connectionless Unix sockets still get read and write
queues, but the write queue is a dummy and never waited on. The read queue is
the connectionless endpoint's queue. This change fixes a bug where the dummy
queue was incorrectly set as the read queue and the endpoint's queue was
incorrectly set as the write queue. This meant that read notifications went
to the dummy queue and were black holed.
PiperOrigin-RevId: 225921042
Change-Id: I8d9059def787a2c3c305185b92d05093fbd2be2a
|
|
The old overlayBoundEndpoint assumed that the lower is not an overlay. It
should check if the lower is an overlay and handle that case.
PiperOrigin-RevId: 225882303
Change-Id: I60660c587d91db2826e0719da0983ec8ad024cb8
|
|
Currently mlock() and friends do nothing whatsoever. However, mlocking
is directly application-visible in a number of ways; for example,
madvise(MADV_DONTNEED) and msync(MS_INVALIDATE) both fail on mlocked
regions. We handle this inconsistently: MADV_DONTNEED is too important
to not work, but MS_INVALIDATE is rejected.
Change MM to track mlocked regions in a manner consistent with Linux.
It still will not actually pin pages into host physical memory, but:
- mlock() will now cause sentry memory management to precommit mlocked
pages.
- MADV_DONTNEED and MS_INVALIDATE will interact with mlocked pages as
described above.
PiperOrigin-RevId: 225861605
Change-Id: Iee187204979ac9a4d15d0e037c152c0902c8d0ee
|
|
Same as with broadcast packets, sending of a multicast packet shouldn't require
accessing the route table. The same applies to IPv6 link-local addresses, which
aren't routable at all (they don't belong to any subnet by definition).
PiperOrigin-RevId: 225775870
Change-Id: Ic53e6560c125a83be2be9c3d112e66b36e8dfe7b
|
|
PiperOrigin-RevId: 225632398
Change-Id: I909e7e2925aa369adc28e844c284d9a6108e85ce
|
|
PiperOrigin-RevId: 225621767
Change-Id: Ie3a42cdf0b0de22a020ff43e307bf86409cff329
|
|
PiperOrigin-RevId: 225620490
Change-Id: Ia726107b3f58093a5f881634f90b071b32d2c269
|
|
PiperOrigin-RevId: 225424296
Change-Id: I60fcc2b859339dca9963cb32227a287e719ab765
|
|
PiperOrigin-RevId: 225421480
Change-Id: I1e9259b0b7e8490164e830b73338a615129c7f0e
|
|
Platform objects are not savable, storing references to them in
filesystem datastructures would cause save to fail if someone actually
passed in a Platform.
Current implementations work because everywhere a Platform is
expected, we currently pass in a Kernel object which embeds Platform
and thus satisfies the interface.
Eliminate this indirection and save pointers to Kernel directly.
PiperOrigin-RevId: 225288336
Change-Id: Ica399ff43f425e15bc150a0d7102196c3d54a2ab
|
|
PiperOrigin-RevId: 225240907
Change-Id: Ie568ce3cd643f3e4a0eaa0444f4ed589dcf6031f
|
|
This is necessary to implement file seals for memfds.
PiperOrigin-RevId: 225239394
Change-Id: Ib3f1ab31385afc4b24e96cd81a05ef1bebbcbb70
|
|
unshare actually takes a subset of clone flags, but has no unique flags,
so formatting as clone flags is close enough.
PiperOrigin-RevId: 225082774
Change-Id: I5b580f18607c7785f323e37809094115520a17c0
|
|
PiperOrigin-RevId: 225041520
Change-Id: Ib1afc693e592d308d60db82022c5b7743fd3c646
|
|
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I565214581eeb44045169da7f44d45a489082ac3a
PiperOrigin-RevId: 224938170
|
|
MSG_WAITALL requests that recv family calls do not perform short reads. It only
has an effect for SOCK_STREAM sockets, other types ignore it.
PiperOrigin-RevId: 224918540
Change-Id: Id97fbf972f1f7cbd4e08eec0138f8cbdf1c94fe7
|
|
PiperOrigin-RevId: 224864380
Change-Id: I49542279ad56bf15ba462d3de1ef2b157b31830a
|
|
arch_prctl already verified that the new FS_BASE was canonical, but
Task.Clone did not. Centralize these checks in the arch packages.
Failure to validate could cause an error in PTRACE_SET_REGS when we try
to switch to the app.
PiperOrigin-RevId: 224862398
Change-Id: Iefe63b3f9aa6c4810326b8936e501be3ec407f14
|
|
PiperOrigin-RevId: 224696233
Change-Id: I45c425d9e32adee5dcce29ca7439a06567b26014
|
|
PiperOrigin-RevId: 224600982
Change-Id: I547253528e24fb0bb318fc9d2632cb80504acb34
|
|
Sample:
I1206 14:24:56.768520 3700 x:0] [ 1] ioctl_test E rt_sigaction(SIGSEGV, 0x7ee6edb0c590 {Handler: 0x559c6d915cf0, Flags: SA_SIGINFO|SA_RESTORER|SA_ONSTACK|SA_NODEFER, Restorer: 0x2a9901a259a0, Mask: []}, 0x7ee6edb0c630)
I1206 14:24:56.768530 3700 x:0] [ 1] ioctl_test X rt_sigaction(SIGSEGV, 0x7ee6edb0c590 {Handler: 0x559c6d915cf0, Flags: SA_SIGINFO|SA_RESTORER|SA_ONSTACK|SA_NODEFER, Restorer: 0x2a9901a259a0, Mask: []}, 0x7ee6edb0c630 {Handler: SIG_DFL, Flags: 0x0, Restorer: 0x0, Mask: []}) = 0x0 (2.701?s)
PiperOrigin-RevId: 224596606
Change-Id: I3512493aed99d3d75600249263da46686b1dc0e7
|
|
PiperOrigin-RevId: 224553291
Change-Id: I35d0772c215b71f4319c23f22df5c61c908f8590
|
|
Sample:
I1205 16:51:49.869701 2492 x:0] [ 1] ioctl_test E rt_sigaction(SIGIO, 0x7e0e5b5e8500, 0x7e0e5b5e85a0)
I1205 16:51:49.869766 2492 x:0] [ 1] ioctl_test X rt_sigaction(SIGIO, 0x7e0e5b5e8500, 0x7e0e5b5e85a0) = 0x0 (44.336?s)
I1205 16:51:49.869831 2492 x:0] [ 1] ioctl_test E rt_sigprocmask(SIG_UNBLOCK, 0x7e0e5b5e8878 [SIGIO], 0x7e0e5b5e87c0, 0x8)
I1205 16:51:49.869866 2492 x:0] [ 1] ioctl_test X rt_sigprocmask(SIG_UNBLOCK, 0x7e0e5b5e8878 [SIGIO], 0x7e0e5b5e87c0 [SIGIO 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64], 0x8) = 0x0 (2.575?s)
PiperOrigin-RevId: 224422404
Change-Id: I3ed3f2ec6b1a639baa9cacd37ce7ee325c3703e4
|
|
Currently sending a broadcast packet (for DHCP, e.g.) requires a "default
route" of the format "0.0.0.0/0 via 0.0.0.0 <intf>". There is no good reason
for this and on devices with several ports this creates a rather akward route
table with lots of such default routes (which defeats the purpose of a default
route).
PiperOrigin-RevId: 224378769
Change-Id: Icd7ec8a206eb08083cff9a837f6f9ab231c73a19
|
|
Unlike FlagSet, order doesn't matter here, so it can simply be a map.
PiperOrigin-RevId: 224377910
Change-Id: I15810c698a7f02d8614bf09b59583ab73cba0514
|
|
* Clarify tcpip.Endpoint.Write contract regarding short writes.
* Enforce tcpip.Endpoint.Write contract regarding short writes.
* Update relevant users of tcpip.Endpoint.Write.
PiperOrigin-RevId: 224377586
Change-Id: I24299ecce902eb11317ee13dae3b8d8a7c5b097d
|
|
Also ensure an event is emitted at startup.
PiperOrigin-RevId: 224372065
Change-Id: I5f642b6d6b13c6468ee8f794effe285fcbbf29cf
|
|
PiperOrigin-RevId: 224351139
Change-Id: I9453bd75e5a8d38db406bb47fdc01038ac60922e
|
|
PiperOrigin-RevId: 224227677
Change-Id: I08b0e0c0574170556269900653e5bcf9e9e5c9c9
|
|
By Walking before checking that the directory is writable and
executable, MayDelete may return the Walk error (e.g., ENOENT) which
would normally be masked by a permission error (EACCES).
PiperOrigin-RevId: 224222453
Change-Id: I108a7f730e6bdaa7f277eaddb776267c00805475
|
|
PiperOrigin-RevId: 224221509
Change-Id: I7aaea74629227d682786d3e435737364921249bf
|
|
PiperOrigin-RevId: 224214981
Change-Id: I4c1dd5b1c856f7a4f9866a5dda44a5297e92486a
|
|
This makes it more obvious why a mount failed.
PiperOrigin-RevId: 224203880
Change-Id: I7961774a7b6fdbb5493a791f8b3815c49b8f7631
|
|
If sys_prctl is called with PR_SET_MM without CAP_SYS_RESOURCE,
the syscall should return failure with errno set to EPERM.
See: http://man7.org/linux/man-pages/man2/prctl.2.html
PiperOrigin-RevId: 224182874
Change-Id: I630d1dd44af8b444dd16e8e58a0764a0cf1ad9a3
|
|
This removes code that should have never made it in in the first place, but did so due to incomplete testing. With the new tests the original code fails, the new code passes.
PiperOrigin-RevId: 224086966
Change-Id: I646fef76977f4528f3705f497b95fad6b3ec32bc
|
|
It is always the same as t.initRegs.
PiperOrigin-RevId: 224085550
Change-Id: I5cc4ddc3b481d4748c3c43f6f4bb50da1dbac694
|
|
FileOperations.Write should return ErrWouldBlock to allow the upper
layer to loop and sendmsg should continue writing where it left off
on a partial write.
PiperOrigin-RevId: 224081631
Change-Id: Ic61f6943ea6b7abbd82e4279decea215347eac48
|
|
The signature of time.now has remained unchanged:
https://github.com/golang/go/blob/c2412a7681d5beaeb5a4ceef3b2b7886361282ce/src/time/time.go#L1072
PiperOrigin-RevId: 224061160
Change-Id: Ic84bd6ee8fb9952cd9ab580bcb0892444ce7c2da
|
|
PiperOrigin-RevId: 224047765
Change-Id: I6f3c75b33c32bf8f8910ea3fab35406d7d672d87
|
|
The number of symbolic links that are allowed to be followed
are for a full path and not just a chain of symbolic links.
PiperOrigin-RevId: 224047321
Change-Id: I5e3c4caf66a93c17eeddcc7f046d1e8bb9434a40
|
|
PiperOrigin-RevId: 224047120
Change-Id: Ia6cb17fa978595cd73857b6178c4bdba401e185e
|
|
NAME_LENGTH must be enforced per component.
PiperOrigin-RevId: 224046749
Change-Id: Iba8105b00d951f2509dc768af58e4110dafbe1c9
|
|
Bazel runs multiple test cases on the same thread. Some of the test
cases rely on the test thread starting with the default memory policy,
while other tests modify the test thread's memory policy. This
obviously breaks when the test framework doesn't run each test case on
a new thread.
Also fixing an incompatibility where set_mempolicy(2) was prevented
from specifying an empty nodemask, which is allowed for some modes.
PiperOrigin-RevId: 224038957
Change-Id: Ibf780766f2706ebc9b129dbc8cf1b85c2a275074
|
|
PiperOrigin-RevId: 224033418
Change-Id: I780be973e8be68ac93e8c9e7a100002e912f40d2
|
|
PiperOrigin-RevId: 224033238
Change-Id: Ie5b1854b29340843b02c123766d290a8738d7631
|
|
PiperOrigin-RevId: 224025363
Change-Id: I98864403c779832e9e1436f7d3c3f6fb2fba9904
|
|
Signed-off-by: Bin Lu <bin.lu@arm.com>
Change-Id: I73cc4c406fadccb054e8e83c9464f6bef6280b0f
PiperOrigin-RevId: 224025309
|
|
Untyped integer constants default to type int and the binary package will panic
if one tries to encode an int.
PiperOrigin-RevId: 223890001
Change-Id: Iccc3afd6d74bad24c35d764508e450fd317b76ec
|
|
PiperOrigin-RevId: 223425575
Change-Id: Idd777e04c69e6ffcbfb0bdbea828a8b8b42d7672
|