Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 363092268
|
|
PiperOrigin-RevId: 363091954
|
|
Doing so involved breaking dependencies between //pkg/tcpip and the rest
of gVisor, which are discouraged anyways.
Tested on the Go branch via:
gvisor.dev/gvisor/pkg/tcpip/...
Addresses #1446.
PiperOrigin-RevId: 363081778
|
|
If there was a partial write (when not using the host FD) which did not generate
an error, we were incorrectly returning the number of bytes attempted to write
instead of the number of bytes actually written.
PiperOrigin-RevId: 363058989
|
|
PiperOrigin-RevId: 362999220
|
|
Lots of small changes:
- simplify package API via Reservation type
- rename some single-letter variable names that were hard to follow
- rename some types
PiperOrigin-RevId: 362442366
|
|
By default, fusefs defers node permission checks to the server. The
default_permissions mount option enables the usual unix permission
checks based on the node owner and mode bits. Previously fusefs was
incorrectly checking permissions unconditionally.
Additionally, fusefs should restrict filesystem access to processes
started by the mount owner to prevent the fuse daemon from gaining
priviledge over other processes. The allow_other mount option
overrides this behaviour. Previously fusefs was incorrectly skipping
this check.
Updates #3229
PiperOrigin-RevId: 362419092
|
|
The Merkle tree files need to be cleared before enabling to avoid
redundant content.
PiperOrigin-RevId: 362409591
|
|
PiperOrigin-RevId: 362406813
|
|
PiperOrigin-RevId: 362297474
|
|
- Implement Stringer for it so that we can improve error messages.
- Use TCPFlags through the code base. There used to be a mixed usage of byte,
uint8 and int as TCP flags.
PiperOrigin-RevId: 361940150
|
|
Speeds up the socket stress tests by a couple orders of magnitude.
PiperOrigin-RevId: 361721050
|
|
Updates #5597
PiperOrigin-RevId: 361252003
|
|
IPv4 would violate the lock ordering of protocol > endpoint when closing
network endpoints by calling `ipv4.protocol.forgetEndpoint` while
holding the network endpoint lock.
PiperOrigin-RevId: 361232817
|
|
The integrator may be interested in who owns a duplicate address so
pass this information (if available) along.
Fixes #5605.
PiperOrigin-RevId: 361213556
|
|
PiperOrigin-RevId: 361196154
|
|
While I'm here, update NDPDispatcher.OnDuplicateAddressDetectionStatus to
take a DADResult and rename it to OnDuplicateAddressDetectionResult.
Fixes #5606.
PiperOrigin-RevId: 360965416
|
|
The only user is in (*handshake).complete and it specifies MaxRTO, so there is
no behavior changes.
PiperOrigin-RevId: 360954447
|
|
transport.baseEndpoint.receiver and transport.baseEndpoint.connected are
protected by transport.baseEndpoint.Mutex. In order to access them without
holding the mutex, we must make a copy.
Notifications must be sent without holding the mutex, so we need the values
without holding the mutex.
|
|
clientEP.Connect may fail because serverEP was not listening.
PiperOrigin-RevId: 360780667
|
|
One of the preparation to decouple underlying buffer implementation.
There are still some methods that tie to VectorisedView, and they will be
changed gradually in later CLs.
This CL also introduce a new ICMPv6ChecksumParams to replace long list of
parameters when calling ICMPv6Checksum, aiming to be more descriptive.
PiperOrigin-RevId: 360778149
|
|
(*os.PathError).Timeout does the same thing.
PiperOrigin-RevId: 360756784
|
|
Changes the neighbor_cache_test.go tests to always assert UpdatedAtNanos.
Completes the assertion of UpdatedAtNanos in every NUD test, a field that was
historically not checked due to the lack of a deterministic, controllable
clock. This is no longer true with the tcpip.Clock interface. While the tests
have been adjusted to use Clock, asserting by the UpdatedAtNanos was neglected.
Fixes #4663
PiperOrigin-RevId: 360730077
|
|
This validates that struct fields if annotated with "// checklocks:mu" where
"mu" is a mutex field in the same struct then access to the field is only
done with "mu" locked.
All types that are guarded by a mutex must be annotated with
// +checklocks:<mutex field name>
For more details please refer to README.md.
PiperOrigin-RevId: 360729328
|
|
While I'm here, simplify the comments and unify naming of certain stats
across protocols.
PiperOrigin-RevId: 360728849
|
|
The syscall package has been deprecated in favor of golang.org/x/sys.
Note that syscall is still used in the following places:
- pkg/sentry/socket/hostinet/stack.go: some netlink related functionalities
are not yet available in golang.org/x/sys.
- syscall.Stat_t is still used in some places because os.FileInfo.Sys() still
returns it and not unix.Stat_t.
Updates #214
PiperOrigin-RevId: 360701387
|
|
Prevent the situation where callers to (*stack).GetLinkAddress provide
incorrect arguments and are unable to observe this condition.
Updates #5583.
PiperOrigin-RevId: 360481557
|
|
io.Reader.ReadFull returns the number of bytes copied and an error if fewer
bytes were read.
PiperOrigin-RevId: 360247614
|
|
There is a short race where in Write an endpoint can transition from writable
to non-writable state due to say an incoming RST during the time we release
the endpoint lock and reacquire after copying the payload. In such a case
if the write happens to be a zero sized write we end up trying to call
sendData() even though nothing was queued.
This can panic when trying to enable/disable TCP timers if the endpoint had
already transitioned to a CLOSED/ERROR state due to the incoming RST as we
cleanup timers when the protocol goroutine terminates.
Sadly the race window is small enough that my attempts at reproducing the panic
in a syscall test has not been successful.
PiperOrigin-RevId: 359887905
|
|
Changes the neighbor_entry_test.go tests to always assert UpdatedAtNanos.
This field was historically not checked due to the lack of a deterministic,
controllable clock. This is no longer true with the tcpip.Clock interface.
While the tests have been adjusted to use Clock, asserting by the
UpdatedAtNanos was neglected.
Subsequent work is needed to assert UpdatedAtNanos in the neighbor cache tests.
Updates #4663
PiperOrigin-RevId: 359868254
|
|
Converts entryTestLinkResolver and testNUDDispatcher to use the embedded
sync.Mutex pattern for fields that may be accessed concurrently from different
gorountines.
Fixes #5541
PiperOrigin-RevId: 359826169
|
|
Adds helper functions for transitioning into common states. This reduces the
boilerplate by a fair amount, decreasing the barriers to entry for new features
added to neighborEntry.
PiperOrigin-RevId: 359810465
|
|
Also increase refcount of raw.endpoint.route while in use.
Avoid allocating an array of size zero.
PiperOrigin-RevId: 359797788
|
|
Use maybeSendSegment while sending segments in RACK recovery which checks if
the receiver has space and splits the segments when the segment size is
greater than MSS.
PiperOrigin-RevId: 359641097
|
|
Prevents the following deadlock:
- Raw packet is sent via e.Write(), which read locks e.mu
- Connect() is called, blocking on write locking e.mu
- The packet is routed to loopback and back to e.HandlePacket(), which read
locks e.mu
Per the atomic.RWMutex documentation, this deadlocks:
"If a goroutine holds a RWMutex for reading and another goroutine might call
Lock, no goroutine should expect to be able to acquire a read lock until the
initial read lock is released. In particular, this prohibits recursive read
locking. This is to ensure that the lock eventually becomes available; a blocked
Lock call excludes new readers from acquiring the lock."
Also, release eps.mu earlier in deliverRawPacket.
PiperOrigin-RevId: 359600926
|
|
PiperOrigin-RevId: 359591577
|
|
sync.WaitGroup.Add(positive delta) is illegal if the WaitGroup counter is zero
and WaitGroup.Wait() may be called concurrently. This is problematic for
p9.connState.pendingWg, which counts inflight requests (so transitions from
zero are normal) and is waited-upon when receiving from the underlying Unix
domain socket returns an error, e.g. during connection shutdown. (Even if the
socket has been closed, new requests can still be concurrently received via
flipcall channels.)
PiperOrigin-RevId: 359416057
|
|
Fixes #5490
PiperOrigin-RevId: 359401532
|
|
One precondition of VFS.PrepareRenameAt is that the `from` and `to` dentries
are not the same. Kernfs was not checking this, which could lead to a deadlock.
PiperOrigin-RevId: 359385974
|
|
Before this CL, VFS2's overlayfs uses a single private device number and an
autoincrementing generated inode number for directories; this is consistent
with Linux's overlayfs in the non-samefs non-xino case. However, this breaks
some applications more consistently than on Linux due to more aggressive
caching of Linux overlayfs dentries.
Switch from using mapped device numbers + the topmost layer's inode number for
just non-copied-up non-directory files, to doing so for all files. This still
allows directory dev/ino numbers to change across copy-up, but otherwise keeps
them consistent.
Fixes #5545:
```
$ docker run --runtime=runsc-vfs2-overlay --rm ubuntu:focal bash -c "mkdir -p 1/2/3/4/5/6/7/8 && rm -rf 1 && echo done"
done
```
PiperOrigin-RevId: 359350716
|
|
Previously, when DAD would detect a conflict for a temporary address,
the address would be removed but its timers would not be stopped,
resulting in a panic when the removed address's invalidation timer
fired.
While I'm here, remove the check for unicast-ness on removed address
endpoints since multicast addresses are no longer stored in the same
structure as unicast addresses as of 27ee4fe76ad586ac8751951a842b3681f93.
Test: stack_test.TestMixedSLAACAddrConflictRegen
PiperOrigin-RevId: 359344849
|
|
- Use atomic add rather than CAS in every Gate method, which is slightly
faster in most cases.
- Implement Close wakeup using gopark/goready to avoid channel allocation.
New benchmarks:
name old time/op new time/op delta
GateEnterLeave-12 16.7ns ± 1% 10.3ns ± 1% -38.44% (p=0.000 n=9+8)
GateClose-12 50.2ns ± 8% 42.4ns ± 6% -15.44% (p=0.000 n=10+10)
GateEnterLeaveAsyncClose-12 972ns ± 2% 640ns ± 7% -34.15% (p=0.000 n=9+10)
PiperOrigin-RevId: 359336344
|
|
PiperOrigin-RevId: 359334029
|
|
`runsc ps` currently return pid for a task's immediate pid namespace,
which is confusing when there're multiple pid namespaces. We should
return only pids in the root namespace.
Before:
```
1000 1 0 0 ? 02:24 250ms chrome
1000 1 0 0 ? 02:24 40ms dumb-init
1000 1 0 0 ? 02:24 240ms chrome
1000 2 1 0 ? 02:24 2.78s node
```
After:
```
UID PID PPID C TTY STIME TIME CMD
1000 1 0 0 ? 12:35 0s dumb-init
1000 2 1 7 ? 12:35 240ms node
1000 13 2 21 ? 12:35 2.33s chrome
1000 27 13 3 ? 12:35 260ms chrome
```
Signed-off-by: Daniel Dao <dqminh@cloudflare.com>
|
|
Restrict ptrace(2) according to the default configurations of the YAMA security
module (mode 1), which is a common default among various Linux distributions.
The new access checks only permit the tracer to proceed if one of the following
conditions is met:
a) The tracer is already attached to the tracee.
b) The target is a descendant of the tracer.
c) The target has explicitly given permission to the tracer through the
PR_SET_PTRACER prctl.
d) The tracer has CAP_SYS_PTRACE.
See security/yama/yama_lsm.c for more details.
Note that these checks are added to CanTrace, which is checked for
PTRACE_ATTACH as well as some other operations, e.g., checking a process'
memory layout through /proc/[pid]/mem.
Since this patch adds restrictions to ptrace, it may break compatibility for
applications run by non-root users that, for instance, rely on being able to
trace processes that are not descended from the tracer (e.g., `gdb -p`). YAMA
restrictions can be turned off by setting /proc/sys/kernel/yama/ptrace_scope
to 0, or exceptions can be made on a per-process basis with the PR_SET_PTRACER
prctl.
Reported-by: syzbot+622822d8bca08c99e8c8@syzkaller.appspotmail.com
PiperOrigin-RevId: 359237723
|
|
PiperOrigin-RevId: 359235699
|
|
PiperOrigin-RevId: 358890980
|
|
Reported-by: syzbot+f2489ba0b999a45d1ad1@syzkaller.appspotmail.com
PiperOrigin-RevId: 358866218
|
|
This removes a three-lock deadlock between fdnotifier.notifier.mu,
epoll.EventPoll.listsMu, and baseEndpoint.mu.
A lock order comment was added to epoll/epoll.go.
Also fix unsafe access of baseEndpoint.connected/receiver.
PiperOrigin-RevId: 358515191
|
|
PiperOrigin-RevId: 358445320
|