summaryrefslogtreecommitdiffhomepage
path: root/pkg
AgeCommit message (Collapse)Author
2020-05-07Allocate device numbers for VFS2 filesystems.Jamie Liu
Updates #1197, #1198, #1672 PiperOrigin-RevId: 310432006
2020-05-07Automated rollback of changelist 309339316Bhasker Hariharan
PiperOrigin-RevId: 310417191
2020-05-07Move pkg/sentry/vfs/{eventfd,timerfd} to new packages in pkg/sentry/fsimpl.Nicolas Lacasse
They don't depend on anything in VFS2, so they should be their own packages. PiperOrigin-RevId: 310416807
2020-05-07Port signalfd to vfs2.Nicolas Lacasse
PiperOrigin-RevId: 310404113
2020-05-07Fix bugs in SACK recovery.Bhasker Hariharan
Every call to sender.NextSeg does not need to iterate from the front of the writeList as in a given recovery episode we can cache the last nextSeg returned. There cannot be a lower sequenced segment that matches the next call to NextSeg as otherwise we would have returned that instead in the previous call. This fixes the issue of excessive CPU usage w/ large send buffers where we spend a lot of time iterating from the front of the list on every NextSeg invocation. Further the following other bugs were also fixed: * Iteration of segments never sent in NextSeg() when looking for segments for retransmission that match step1/3/4 of the NextSeg algorithm * Correctly setting rescueRxt only if the rescue segment was actually sent. * Correctly initializing rescueRxt/highRxt when entering SACK recovery. * Correctly re-arming the timer only on retransmissions when SACK is in use and not for every segment being sent as it was being done before. * Copy over xmitTime and xmitCount on segment clone. * Move writeNext along when skipping over SACKED segments. This is required to prevent spurious retransmissions where we end up retransmitting data that was never lost. PiperOrigin-RevId: 310387671
2020-05-07Update privateunixsocket TODOs.Dean Deng
Synthetic sockets do not have the race condition issue in VFS2, and we will get rid of privateunixsocket as well. Fixes #1200. PiperOrigin-RevId: 310386474
2020-05-07Merge pull request #2639 from kevinGC:ipv4-frag-reassembly-testgVisor bot
PiperOrigin-RevId: 310380911
2020-05-07Remove outdated TODO for VFS2 AccessAt.Dean Deng
Fixes #1965. PiperOrigin-RevId: 310380433
2020-05-06Add basic incoming ipv4 fragment testsKevin Krakauer
Based on ipv6's TestReceiveIPv6Fragments.
2020-05-06Merge pull request #2570 from lubinszARM:pr_cleangVisor bot
PiperOrigin-RevId: 310259686
2020-05-06Remove vfs.FileDescriptionOptions.InvalidWrite.Jamie Liu
Compare: https://elixir.bootlin.com/linux/v5.6/source/fs/timerfd.c#L431 PiperOrigin-RevId: 310246908
2020-05-06Do not assume no DHCPv6 configurationsGhanan Gowripalan
Do not assume that networks need any DHCPv6 configurations. Instead, notify the NDP dispatcher in response to the first NDP RA's DHCPv6 flags, even if the flags indicate no DHCPv6 configurations are available. PiperOrigin-RevId: 310245068
2020-05-06Fix runsc syscall documentation generation.Adin Scannell
We can register any number of tables with any number of architectures, and need not limit the definitions to the architecture in question. This allows runsc to generate documentation for all architectures simultaneously. Similarly, this simplifies the VFSv2 patching process. PiperOrigin-RevId: 310224827
2020-05-06sniffer: fix accidental logging of good packets as badKevin Krakauer
We need to check vv.Size() instead of len(tcp), as tcp will always be 20 bytes long. PiperOrigin-RevId: 310218351
2020-05-06Add maximum memory limit.Nicolas Lacasse
PiperOrigin-RevId: 310179277
2020-05-05Internal change.gVisor bot
PiperOrigin-RevId: 310057834
2020-05-05Support TCP zero window probes.Mithun Iyer
As per RFC 1122 4.2.2.17, when the remote advertizes zero receive window, the sender needs to probe for the window-size to become non-zero starting from the next retransmission interval. The TCP connection needs to be kept open as long as the remote is acknowledging the zero window probes. We reuse the retransmission timers to support this. Fixes #1644 PiperOrigin-RevId: 310021575
2020-05-05Update vfs2 socket TODOs.Dean Deng
Three updates: - Mark all vfs2 socket syscalls as supported. - Use the same dev number and ino number generator for all types of sockets, unlike in VFS1. - Do not use host fd for hostinet metadata. Fixes #1476, #1478, #1484, 1485, #2017. PiperOrigin-RevId: 309994579
2020-05-05Update comments for synthetic gofer files in vfs2.Dean Deng
PiperOrigin-RevId: 309966538
2020-05-05Return correct name for imported host filesFabricio Voznika
Implement PrependPath() in host.filesystem to correctly format name for host files. Updates #1672 PiperOrigin-RevId: 309959135
2020-05-05Translate p9.NoUID/GID to OverflowUID/GID.Jamie Liu
p9.NoUID/GID (== uint32(-1) == auth.NoID) is not a valid auth.KUID/KGID; in particular, using it for file ownership causes capabilities to be ineffective since file capabilities require that the file's KUID and KGID are mapped into the capability holder's user namespace [1], and auth.NoID is not mapped into any user namespace. Map p9.NoUID/GID to a different, valid KUID/KGID; in the unlikely case that an application actually using the overflow KUID/KGID attempts an operation that is consequently permitted by client permission checks, the remote operation will still fail with EPERM. Since this changes the VFS2 gofer client to no longer ignore the invalid IDs entirely, this CL both permits and requires that we change synthetic mount point creation to use root credentials. [1] See fs.Inode.CheckCapability or vfs.GenericCheckPermissions. PiperOrigin-RevId: 309856455
2020-05-04Port eventfd to VFS2.Nicolas Lacasse
And move sys_timerfd.go to just timerfd.go for consistency. Updates #1475. PiperOrigin-RevId: 309835029
2020-05-04Remove kernfs.Filesystem cast from GenericDirectoryFDFabricio Voznika
This allows for kerfs.Filesystem to be overridden by different implementations. Updates #1672 PiperOrigin-RevId: 309809321
2020-05-04Merge pull request #2275 from nybidari:iptablesgVisor bot
PiperOrigin-RevId: 309783486
2020-05-04Add TTY support on VFS2 to runscFabricio Voznika
Updates #1623, #1487 PiperOrigin-RevId: 309777922
2020-05-04Fix flaky monotonic time.Adin Scannell
This change ensures that even platforms with some TSC issues (e.g. KVM), can get reliable monotonic time by applied a lower bound on each read. PiperOrigin-RevId: 309773801
2020-05-01Support for connection tracking of TCP packets.Nayana Bidari
Connection tracking is used to track packets in prerouting and output hooks of iptables. The NAT rules modify the tuples in connections. The connection tracking code modifies the packets by looking at the modified tuples.
2020-05-01Regenerate SLAAC address on conflicts with the NICGhanan Gowripalan
If the NIC already has a generated SLAAC address, regenerate a new SLAAC address until one is generated that does not conflict with the NIC's existing addresses, up to a maximum of 10 attempts. This applies to both stable and temporary SLAAC addresses. Test: stack_test.TestMixedSLAACAddrConflictRegen PiperOrigin-RevId: 309495628
2020-05-01Automated rollback of changelist 308674219Kevin Krakauer
PiperOrigin-RevId: 309491861
2020-05-01Port netstack, hostinet, and netlink sockets to VFS2.Dean Deng
All three follow the same pattern: 1. Refactor VFS1 sockets into socketOpsCommon, so that most of the methods can be shared with VFS2. 2. Create a FileDescriptionImpl with the corresponding socket operations, rewriting the few that cannot be shared with VFS1. 3. Set up a VFS2 socket provider that creates a socket by setting up a dentry in the global Kernel.socketMount and connecting it with a new FileDescription. This mostly completes the work for porting sockets to VFS2, and many syscall tests can be enabled as a result. There are several networking-related syscall tests that are still not passing: 1. net gofer tests 2. socketpair gofer tests 2. sendfile tests (splice is not implemented in VFS2 yet) Updates #1478, #1484, #1485 PiperOrigin-RevId: 309457331
2020-04-30Enable FIFO QDisc by default in runsc.Bhasker Hariharan
Updates #231 PiperOrigin-RevId: 309339316
2020-04-30FIFO QDisc implementationBhasker Hariharan
Updates #231 PiperOrigin-RevId: 309323808
2020-04-30Add gofer.InternalFilesystemOptions.LeakConnection.Jamie Liu
PiperOrigin-RevId: 309317605
2020-04-30Implement waiter.Waitable methods on VFS2 host inodes.Nicolas Lacasse
This fixes bash in Ubuntu. Updates #1672. PiperOrigin-RevId: 309298252
2020-04-30Prefer temporary addressesGhanan Gowripalan
Implement rule 7 of Source Address Selection RFC 6724 section 5. This makes temporary (short-lived) addresses preferred over non-temporary addresses when earlier rules are equal. Test: stack_test.TestIPv6SourceAddressSelectionScopeAndSameAddress PiperOrigin-RevId: 309250975
2020-04-30Fix proc net bugs in VFS2.Dean Deng
The /proc/net/udp header was missing, and /proc/sys/net was set up as /proc/sys/net/net. Discovered while trying to run networking tests for VFS2. PiperOrigin-RevId: 309243758
2020-04-29Add read/write timeouts for VFS2 socket files.Dean Deng
Updates #1476 PiperOrigin-RevId: 309098590
2020-04-29iptables: don't pollute logsKevin Krakauer
The netfilter package uses logs to make debugging the (de)serialization of structs easier. This generates a lot of (usually irrelevant) logs. Logging is now hidden behind a debug flag. PiperOrigin-RevId: 309087115
2020-04-28Fix Unix socket permissions.Dean Deng
Enforce write permission checks in BoundEndpointAt, which corresponds to the permission checks in Linux (net/unix/af_unix.c:unix_find_other). Also, create bound socket files with the correct permissions in VFS2. Fixes #2324. PiperOrigin-RevId: 308949084
2020-04-28Internal change.gVisor bot
PiperOrigin-RevId: 308940886
2020-04-28Deduplicate unix socket Release() method.Dean Deng
PiperOrigin-RevId: 308932254
2020-04-28Support IPv6 Privacy Extensions for SLAACGhanan Gowripalan
Support generating temporary (short-lived) IPv6 SLAAC addresses to address privacy concerns outlined in RFC 4941. Tests: - stack_test.TestAutoGenTempAddr - stack_test.TestNoAutoGenTempAddrForLinkLocal - stack_test.TestAutoGenTempAddrRegen - stack_test.TestAutoGenTempAddrRegenTimerUpdates - stack_test.TestNoAutoGenTempAddrWithoutStableAddr - stack_test.TestAutoGenAddrInResponseToDADConflicts PiperOrigin-RevId: 308915566
2020-04-28Support pipes and sockets in VFS2 gofer fs.Dean Deng
Named pipes and sockets can be represented in two ways in gofer fs: 1. As a file on the remote filesystem. In this case, all file operations are passed through 9p. 2. As a synthetic file that is internal to the sandbox. In this case, the dentry stores an endpoint or VFSPipe for sockets and pipes respectively, which replaces interactions with the remote fs through the gofer. In gofer.filesystem.MknodAt, we attempt to call mknod(2) through 9p, and if it fails, fall back to the synthetic version. Updates #1200. PiperOrigin-RevId: 308828161
2020-04-28code clean in arch moduleBin Lu
Signed-off-by: Bin Lu <bin.lu@arm.com>
2020-04-27Import host sockets.Dean Deng
The FileDescription implementation for hostfs sockets uses the standard Unix socket implementation (unix.SocketVFS2), but is also tied to a hostfs dentry. Updates #1672, #1476 PiperOrigin-RevId: 308716426
2020-04-27Reduce flakiness in tcp_test.Bhasker Hariharan
Poll for metric updates as immediately trying to read them can sometimes be flaky if due to goroutine scheduling the check happens before the sender has got a chance to update the corresponding sent metric. PiperOrigin-RevId: 308712817
2020-04-27Dump stack for stuck start and stuck watchdogFabricio Voznika
The meaning for skipDump was reversed, but not all callers were updated. Change the meaning once again to forceDump, so that the period between stack dump is respected from all callers. PiperOrigin-RevId: 308674373
2020-04-27Automated rollback of changelist 308163542gVisor bot
PiperOrigin-RevId: 308674219
2020-04-27Don't leak vfs.MountNamespace reference if kernel.TaskSet.NewTask fails.Jamie Liu
PiperOrigin-RevId: 308617610
2020-04-25Enable automated marshalling for signals and the arch package.Rahat Mahmood
PiperOrigin-RevId: 308472331
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 17:34:57 +0000