summaryrefslogtreecommitdiffhomepage
path: root/pkg
AgeCommit message (Collapse)Author
2020-10-27Wake up any waiters on an ICMP error on UDP socket.Bhasker Hariharan
This change wakes up any waiters when we receive an ICMP port unreachable control packet on an UDP socket as well as sets waiter.EventErr in the result returned by Readiness() when e.lastError is not nil. The latter is required where an epoll()/poll() is done after the error is already handled since we will never notify again in such cases. PiperOrigin-RevId: 339370469
2020-10-27Implement /proc/[pid]/memLennart
This PR implements /proc/[pid]/mem for `pkg/sentry/fs` (refer to #2716) and `pkg/sentry/fsimpl`. @majek COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/4060 from lnsp:proc-pid-mem 2caf9021254646f441be618a9bb5528610e44d43 PiperOrigin-RevId: 339369629
2020-10-27Pass NeighborEntry in NUD callbacksTamir Duberstein
...instead of passing its fields piecemeal. PiperOrigin-RevId: 339345899
2020-10-27Assign VFS2 overlay device numbers based on layer device numbers.Jamie Liu
In VFS1's overlayfs, files use the device and inode number of the lower layer inode if one exists, and the upper layer inode otherwise. The former behavior is inefficient (requiring lower layer lookups even if the file exists and is otherwise wholly determined by the upper layer), and somewhat dangerous if the lower layer is also observable (since both the overlay and lower layer file will have the same device and inode numbers and thus appear to be the same file, despite being behaviorally different). VFS2 overlayfs imitates Linux overlayfs (in its default configuration) instead; it always uses the inode number from the originating layer, but synthesizes a unique device number for directories and another device number for non-directory files that have not been copied-up. As it turns out, the latter is insufficient (in VFS2, and possibly Linux as well), because a given layer may include files with different device numbers. If two distinct files on such a layer have device number X and Y respectively, but share inode number Z, then the overlay will map both files to some private device number X' and inode number Z, potentially confusing applications. Fix this by assigning synthetic device numbers based on the lower layer's device number, rather than the lower layer's vfs.Filesystem. PiperOrigin-RevId: 339300341
2020-10-27Add basic address deletion to netlinkIan Lewis
Updates #3921 PiperOrigin-RevId: 339195417
2020-10-26Implement command IPC_STAT for semctl.Jing Chen
PiperOrigin-RevId: 339166854
2020-10-26Add verity tests for deleted/renamed casesChong Cai
Also change verity test to use a context with an active task. This is required to delete/rename the file in the underlying file system. PiperOrigin-RevId: 339146445
2020-10-26[vfs] kernfs: Implement LRU cache for kernfs dentries.Ayush Ranjan
Much like the VFS2 gofer client, kernfs too now caches dentries. The size of the LRU cache is configurable via mount options. Have adopted the same reference semantics from gofer client dentry. Only sysfs and procfs use this LRU cache. The rest of the kernfs users (devpts, fusefs, host, pipefs, sockfs) still use the no cache approach. PiperOrigin-RevId: 339139835
2020-10-26Fix SCM Rights S/R reference leak.Dean Deng
Control messages collected when peeking into a socket were being leaked. PiperOrigin-RevId: 339114961
2020-10-24Implement Seek in verity fsChong Cai
PiperOrigin-RevId: 338847417
2020-10-24Add leak checking to vfs2 structures that cannot use the refs_vfs2 template.Dean Deng
Updates #1486. PiperOrigin-RevId: 338832085
2020-10-24Send ICMP error message if IP fragment reassembly failsToshi Kikuchi
Fixes #4427, #4428 PiperOrigin-RevId: 338805047
2020-10-23Internal change.Chong Cai
PiperOrigin-RevId: 338798433
2020-10-23Fix nogo tests in //pkg/sentry/socket/...Ting-Yu Wang
PiperOrigin-RevId: 338784921
2020-10-23Support VFS2 save/restore.Jamie Liu
Inode number consistency checks are now skipped in save/restore tests for reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename. They pass in VFS1 due to the bug described in new test case SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs. Fixes #1663 PiperOrigin-RevId: 338776148
2020-10-23Introduce SemidDs struct for amd64 and arm64.Jing Chen
PiperOrigin-RevId: 338756277
2020-10-23[vfs] kernfs: cleanup/refactor.Ayush Ranjan
PiperOrigin-RevId: 338728070
2020-10-23//pkg/state fixes for VFS2.Jamie Liu
- When encodeState.resolve() determines that the resolved reflect.Value is contained by a previously-resolved object, set wire.Ref.Type to the containing object's type (existing.obj.Type()) rather than the contained value's type (obj.Type()). - When encodeState.resolve() determines that the resolved reflect.Value contains a previously-resolved object, handle cases where the new object contains *multiple* previously-resolved objects. (This may cause previously-allocated object IDs to become unused; to facilitate this, change encodeState.pending to a map, and change the wire format to prefix each object with its object ID.) - Add encodeState.encodedStructs to avoid redundant encoding of structs, since deduplication of objects via encodeState.resolve() doesn't work for objects instantiated by StateSave() and passed to SaveValue() (i.e. fields tagged `state:".(whatever)"`). - Make unexported array fields deserializable via slices that refer to them by casting away their unexportedness in decodeState.decodeObject(). Updates #1663 PiperOrigin-RevId: 338727687
2020-10-23Wait before transitioning NUD entries from Probe to FailedSam Balana
Wait an additional RetransmitTimer duration after the last probe before transitioning to Failed. The previous implementation transitions immediately to Failed after sending the last probe, which is erroneous behavior. PiperOrigin-RevId: 338723794
2020-10-23Implement Read in gvisor verity fsChong Cai
Read is implemented by PRead, with offset obtained from Seek. PiperOrigin-RevId: 338718587
2020-10-23[vfs] kernfs: Implement remaining InodeAttr fields.Ayush Ranjan
Added the following fields in kernfs.InodeAttr: - blockSize - atime - mtime - ctime Also resolved all TODOs for #1193. Fixes #1193 PiperOrigin-RevId: 338714527
2020-10-23Fix TestTCPTimeWaitNewSyn.Bhasker Hariharan
Drain the notification channel after first accept as in case the first accept never blocked then the notification for the first accept will still be in the channel causing the second accept to fail as it will try to wait on the channel and return immediately due to the older notification even though there is no connection yet in the accept queue. PiperOrigin-RevId: 338710062
2020-10-23Check for verity file/Merkle file when reopenChong Cai
Even if the child dentry has been cached, we should still check whether the file and the corresponding Merkle tree file exist as expected. This ensures that we can detect deletion/renaming of files that have been previous enabled and opened. Also make all verification failures to return EIO. This helps to test verify failures. PiperOrigin-RevId: 338709055
2020-10-23Support getsockopt for SO_ACCEPTCONN.Nayana Bidari
The SO_ACCEPTCONN option is used only on getsockopt(). When this option is specified, getsockopt() indicates whether socket listening is enabled for the socket. A value of zero indicates that socket listening is disabled; non-zero that it is enabled. PiperOrigin-RevId: 338703206
2020-10-23Do not hold NIC local address in neighbor entriesGhanan Gowripalan
Previously, the NIC local address used when completing link resolution was held in the neighbor entry. A neighbor is not identified by any NIC local address so remove it. PiperOrigin-RevId: 338699695
2020-10-23Decrement e.synRcvdCount once handshake is complete.Bhasker Hariharan
Earlier the count was dropped only after calling e.deliverAccepted. This lead to an issue where there were no connections in SYN-RCVD state for the listening endpoint but e.synRcvdCount would not be zero because it was being reduced only when handleSynSegment returned after deliverAccepted returned. This issue is seen when the Nth SYN for a listen backlog of size N which would cause the listen backlog to be full gets dropped occasionally. This happens when the new SYN comes at when the previous completed endpoint has been delivered to the accept queue but the synRcvdCount hasn't yet been decremented because the goroutine running handleSynSegment has not yet completed. PiperOrigin-RevId: 338690646
2020-10-23Rewrite reference leak checker without finalizers.Dean Deng
Our current reference leak checker uses finalizers to verify whether an object has reached zero references before it is garbage collected. There are multiple problems with this mechanism, so a rewrite is in order. With finalizers, there is no way to guarantee that a finalizer will run before the program exits. When an unreachable object with a finalizer is garbage collected, its finalizer will be added to a queue and run asynchronously. The best we can do is run garbage collection upon sandbox exit to make sure that all finalizers are enqueued. Furthermore, if there is a chain of finalized objects, e.g. A points to B points to C, garbage collection needs to run multiple times before all of the finalizers are enqueued. The first GC run will register the finalizer for A but not free it. It takes another GC run to free A, at which point B's finalizer can be registered. As a result, we need to run GC as many times as the length of the longest such chain to have a somewhat reliable leak checker. Finally, a cyclical chain of structs pointing to one another will never be garbage collected if a finalizer is set. This is a well-known issue with Go finalizers (https://github.com/golang/go/issues/7358). Using leak checking on filesystem objects that produce cycles will not work and even result in memory leaks. The new leak checker stores reference counted objects in a global map when leak check is enabled and removes them once they are destroyed. At sandbox exit, any remaining objects in the map are considered as leaked. This provides a deterministic way of detecting leaks without relying on the complexities of finalizers and garbage collection. This approach has several benefits over the former, including: - Always detects leaks of objects that should be destroyed very close to sandbox exit. The old checker very rarely detected these leaks, because it relied on garbage collection to be run in a short window of time. - Panics if we forgot to enable leak check on a ref-counted object (we will try to remove it from the map when it is destroyed, but it will never have been added). - Can store extra logging information in the map values without adding to the size of the ref count struct itself. With the size of just an int64, the ref count object remains compact, meaning frequent operations like IncRef/DecRef are more cache-efficient. - Can aggregate leak results in a single report after the sandbox exits. Instead of having warnings littered in the log, which were non-deterministically triggered by garbage collection, we can print all warning messages at once. Note that this could also be a limitation--the sandbox must exit properly for leaks to be detected. Some basic benchmarking indicates that this change does not significantly affect performance when leak checking is enabled, which is understandable since registering/unregistering is only done once for each filesystem object. Updates #1486. PiperOrigin-RevId: 338685972
2020-10-22Pass NetworkInterface to LinkAddressRequestGhanan Gowripalan
Previously a link endpoint was passed to stack.LinkAddressResolver.LinkAddressRequest. With this change, implementations that want a route for the link address request may find one through the stack. Other implementations that want to send a packet without a route may continue to do so using the network interface directly. Test: - arp_test.TestLinkAddressRequest - ipv6.TestLinkAddressRequest PiperOrigin-RevId: 338577474
2020-10-21Add underflow check when calculating the MTUArthur Sfez
Also enforce the minimum MTU for IPv4 and IPv6, and discard packets if the minimum is not met. PiperOrigin-RevId: 338404225
2020-10-21Check for nil in kernel.FSContext functions.Dean Deng
Reported-by: syzbot+c0e175d2b10708314eb3@syzkaller.appspotmail.com PiperOrigin-RevId: 338386575
2020-10-21Merge pull request #4535 from lubinszARM:pr_kvm_exec_binary_1gVisor bot
PiperOrigin-RevId: 338321125
2020-10-20Fix nogo test in //pkg/tcpip/...Ting-Yu Wang
PiperOrigin-RevId: 338168977
2020-10-20Fix locking in AddressableEndpointStateGhanan Gowripalan
PiperOrigin-RevId: 338156438
2020-10-20Fix nogo tests.Ting-Yu Wang
//pkg/tcpip/stack:stack_x_test_nogo //pkg/tcpip/transport/raw:raw_nogo PiperOrigin-RevId: 338153265
2020-10-20Merge pull request #4524 from lemin9538:lemin_arm64gVisor bot
PiperOrigin-RevId: 338126491
2020-10-19loader/elf: validate file offsetAndrei Vagin
Reported-by: syzbot+7406eef8247cb5a20855@syzkaller.appspotmail.com PiperOrigin-RevId: 337974474
2020-10-19Fix reference counting on kcov mappings.Dean Deng
Reported-by: syzbot+078580ce5dd6d607fcd8@syzkaller.appspotmail.com Reported-by: syzbot+2096681f6891e7bf8aed@syzkaller.appspotmail.com PiperOrigin-RevId: 337973519
2020-10-19Fix runsc tests on VFS2 overlay.Jamie Liu
- Check the sticky bit in overlay.filesystem.UnlinkAt(). Fixes StickyTest.StickyBitPermDenied. - When configuring a VFS2 overlay in runsc, copy the lower layer's root owner/group/mode to the upper layer's root (as in the VFS1 equivalent, boot.addOverlay()). This makes the overlay root owned by UID/GID 65534 with mode 0755 rather than owned by UID/GID 0 with mode 01777. Fixes CreateTest.CreateFailsOnUnpermittedDir, which assumes that the test cannot create files in /. - MknodTest.UnimplementedTypesReturnError assumes that the creation of device special files is not supported. However, while the VFS2 gofer client still doesn't support device special files, VFS2 tmpfs does, and in the overlay test dimension mknod() targets a tmpfs upper layer. The test initially has all capabilities, including CAP_MKNOD, so its creation of these files succeeds. Constrain these tests to VFS1. - Rename overlay.nonDirectoryFD to overlay.regularFileFD and only use it for regular files, using the original FD for pipes and device special files. This is more consistent with Linux (which gets the original inode_operations, and therefore file_operations, for these file types from ovl_fill_inode() => init_special_inode()) and fixes remaining mknod and pipe tests. - Read/write 1KB at a time in PipeTest.Streaming, rather than 4 bytes. This isn't strictly necessary, but it makes the test less obnoxiously slow on ptrace. Fixes #4407 PiperOrigin-RevId: 337971042
2020-10-19Remove legacy bazel configurations.Adin Scannell
Using the newer bazel rules necessitates a transition from proto1 to proto2. In order to resolve the incompatibility between proto2 and gogoproto, the cri runtimeoptions proto must be vendored. Further, some of the semantics of bazel caching changed during the transition. It is now necessary to: - Ensure that :gopath depends only on pure library targets, as the propagation of go_binary build attributes (pure, static) will affected the generated files (though content remains the same, there are conflicts with respect to the gopath). - Update bazel.mk to include the possibility of binaries in the bazel-out directory, as it will now put runsc and others there. This required some refinements to the mechanism of extracting paths, since some the existing regex resulted in false positives. - Change nogo rules to prevent escape generation on binary targets. For some reason, the newer version of bazel attempted to run the nogo analysis on the binary targets, which fails due to the fact that objdump does not work on the final binary. This must be due to a change in the semantics of aspects in bazel3. PiperOrigin-RevId: 337958324
2020-10-19[vfs2] Fix fork reference leaks.Dean Deng
PiperOrigin-RevId: 337919424
2020-10-19splice: return EINVAL is len is negativeAndrei Vagin
Reported-by: syzbot+0268cc591c0f517a1de0@syzkaller.appspotmail.com PiperOrigin-RevId: 337901664
2020-10-19pgalloc: Do not hold MemoryFile.mu while calling mincore.Ayush Ranjan
This change makes the following changes: - Unlocks MemoryFile.mu while calling mincore (checkCommitted) because mincore can take a really long time. Accordingly looks up the segment in the tree tree again and handles changes to the segment. - MemoryFile.UpdateUsage() can now only be called at frequency at most 100Hz. 100 Hz = linux.CLOCKS_PER_SEC. Co-authored-by: Jamie Liu <jamieliu@google.com> PiperOrigin-RevId: 337865250
2020-10-18arm64 kvm: handle exception from accessing undefined instructionBin Lu
Consistent with the linux approach, we will produce a sigill to handle el0_undef. After applying this patch, exec_binary_test_runsc_kvm will be passed on Arm64. Signed-off-by: Bin Lu <bin.lu@arm.com>
2020-10-16Don't include link header when forwarding packetsGhanan Gowripalan
Before this change, if a link header was included in an incoming packet that is forwarded, the packet that gets sent out will take the original packet and add a link header to it while keeping the old link header. This would make the sent packet look like: OUTGOING LINK HDR | INCOMING LINK HDR | NETWORK HDR | ... Obviously this is incorrect as we should drop the incoming link header and only include the outgoing link header. This change fixes this bug. Test: integration_test.TestForwarding PiperOrigin-RevId: 337571447
2020-10-16Make IPv4 check the IP header checksumJulian Elischer
The IPv4 header checksum has not been checked, at least in recent times, so add code to do so. Fix all the tests that fail because they never needed to set the checksum. Fixes #4484 PiperOrigin-RevId: 337556243
2020-10-16Enable IPv4 fragmentation for every code path.Arthur Sfez
Currently, fragmentation can only occur during WritePacket(). This enables it for WritePackets() and WriteIncludedHeaderPacket() as well. IPv4 unit tests were refactored to be consistent with the IPv6 unit tests. This removes the extraHeaderReserveLength field and the related "prependable bytes" unit tests (for both IPv4 and IPv6) because it was only testing a panic condition when the value was too low. Fixes #3796 PiperOrigin-RevId: 337550061
2020-10-16Merge pull request #4387 from lubinszARM:pr_tls_host_sentry_1gVisor bot
PiperOrigin-RevId: 337544656
2020-10-16Enable IPv6 WriteHeaderIncludedPacketGhanan Gowripalan
Allow writing an IPv6 packet where the IPv6 header is a provided by the user. * Introduce an error to let callers know a header is malformed. We previously useed tcpip.ErrInvalidOptionValue but that did not seem appropriate for generic malformed header errors. * Populate network header in WriteHeaderIncludedPacket IPv4's implementation of WriteHeaderIncludedPacket did not previously populate the packet buffer's network header. This change fixes that. Fixes #4527 Test: ip_test.TestWriteHeaderIncludedPacket PiperOrigin-RevId: 337534548
2020-10-15sockets: ignore io.EOF from view.ReadAtAndrei Vagin
Reported-by: syzbot+5466463b7604c2902875@syzkaller.appspotmail.com PiperOrigin-RevId: 337451896
2020-10-15Process NAs without target link-layer addressesSam Balana
RFC 4861 section 4.4 comments the Target link-layer address option is sometimes optional in a Neighbor Advertisement packet: "When responding to a unicast Neighbor Solicitation this option SHOULD be included." Tests: pkg/tcpip/stack:stack_test - TestEntryStaleToReachableWhenSolicitedConfirmationWithoutAddress - TestEntryDelayToReachableWhenSolicitedConfirmationWithoutAddress - TestEntryProbeToReachableWhenSolicitedConfirmationWithoutAddress pkg/tcpip/network/ipv6:ipv6_test - TestCallsToNeighborCache PiperOrigin-RevId: 337396493
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 12:22:17 +0000