Age | Commit message (Collapse) | Author |
|
The current implementation of loss recovery algorithms SACK and NewReno are in
the same file(snd.go). The functions have multiple checks to see which one is
currently used by the endpoint. This CL will refactor and separate the
implementation of existing recovery algorithms which will help us to implement
new recovery algorithms(such as RACK) with less changes to the existing code.
There is no change in the behavior.
PiperOrigin-RevId: 342312166
|
|
PiperOrigin-RevId: 342297902
|
|
- Don't close fdchannel.Endpoint.sockfd in Shutdown(), while it still may be in
use.
- Don't call runtime.enter/exitsyscall from RecvFDNonblock().
PiperOrigin-RevId: 342221770
|
|
PiperOrigin-RevId: 342221309
|
|
PiperOrigin-RevId: 342214859
|
|
Store all the socket level options in a struct and call {Get/Set}SockOpt on
this struct. This will avoid implementing socket level options on all
endpoints. This CL contains implementing one socket level option for tcp and
udp endpoints.
PiperOrigin-RevId: 342203981
|
|
PiperOrigin-RevId: 342179912
|
|
- Add log statements in service entry points.
- Propagate `-debug` flag from shim invokation to the service
- Load options when shim process is invoked to ensure runsc commands
use the correct set of options, e.g. --debug --debug-logs=...
- Add debug options to the shim configuration directly, so it doesn't
rely on containerd configuration (and restart) to enable shim debug.
- Save shim logs to dedicated file, so it's easier to read logs. They
would be mixed with containerd logs and hard to distinguish
otherwise.
PiperOrigin-RevId: 342179868
|
|
RELNOTES: n/a
PiperOrigin-RevId: 342176296
|
|
kernel.Task can only be used as context.Context by that Task's task goroutine.
This is violated in at least two places:
- In any case where one thread accesses the /proc/[tid] of any other thread,
passing the kernel.Task for [tid] as the context.Context is incorrect.
- Task.rebuildTraceContext() may be called by Kernel.RebuildTraceContexts()
outside the scope of any task goroutine.
Fix these (as well as a data race on Task.traceContext discovered during the
course of finding the latter).
PiperOrigin-RevId: 342174404
|
|
children names map can be used to verify whether a child is expected
during walking, so that we can detect unexpected modifications that
deleted/renamed both the target file and the corresponding merkle tree
file.
PiperOrigin-RevId: 342170715
|
|
Add a unit test for ipv4.Encode and a round trip test.
PiperOrigin-RevId: 342169517
|
|
This reduces confusion with context.Context (which is also relevant to
kernel.Tasks) and is consistent with existing function kernel.LoadTaskImage().
PiperOrigin-RevId: 342167298
|
|
The NIC should not hold network-layer state or logic - network packet
handling/forwarding should be performed at the network layer instead
of the NIC.
Fixes #4688
PiperOrigin-RevId: 342166985
|
|
PiperOrigin-RevId: 342161204
|
|
Separate the test cases from TestVerify so that the test names reflect
the test case better.
PiperOrigin-RevId: 342152754
|
|
PiperOrigin-RevId: 341982672
|
|
Fixes #1486.
PiperOrigin-RevId: 341966640
|
|
Most packets don't have options but they are an integral part of the
standard. Teaching the ipv4 code how to handle them will simplify future
testing and use. Because Options are so rare it is worth making sure
that the extra work is kept out of the fast path as much as possible.
Prior to this change, all usages of the IHL field of the IPv4Fields/Encode
system set it to the same constant value except in a couple of tests
for bad values. From this change IHL will not be a constant as it will
depend on the size of any Options. Since ipv4.Encode() now handles the
options it becomes a possible source of errors to let the callers set
this value, so remove it entirely and calculate the value from the size
of the Options if present (or not) therefore guaranteeing a correct value.
Fixes #4709
RELNOTES: n/a
PiperOrigin-RevId: 341864765
|
|
May help with debugging
https://syzkaller.appspot.com/bug?id=0d717bd7028dceeb4b38f09aab2841c398b41d81
PiperOrigin-RevId: 341640485
|
|
This Notify was added as part of cl/279106406; but notifying `EventHUp`
in `FIN_WAIT2` is incorrect, as we want to only notify later on
`TIME_WAIT` or a reset. However, we do need to notify any blocked
waiters of an activity on the endpoint with `EventIn`|`EventOut`.
PiperOrigin-RevId: 341490913
|
|
cl/340002915 modified the code to return EADDRNOTAVAIL if connect
is called for a localhost address which isn't set.
But actually, Linux returns EADDRNOTAVAIL for ipv6 addresses and ENETUNREACH
for ipv4 addresses.
Updates #4735
PiperOrigin-RevId: 341479129
|
|
This will help to debug:
https://syzkaller.appspot.com/bug?id=0d717bd7028dceeb4b38f09aab2841c398b41d81
PiperOrigin-RevId: 341458715
|
|
PiperOrigin-RevId: 341445910
|
|
This lets us avoid treating a value of 0 as one reference. All references
using the refsvfs2 template must call InitRefs() before the reference is
incremented/decremented, or else a panic will occur. Therefore, it should be
pretty easy to identify missing InitRef calls during testing.
Updates #1486.
PiperOrigin-RevId: 341411151
|
|
This is necessary to allow writes to files opened with O_WRONLY to go through
host FDs.
PiperOrigin-RevId: 341174509
|
|
This is consistent with what Linux does. This was causing a PHP runtime test
failure. Fixed it for VFS2.
PiperOrigin-RevId: 341155209
|
|
PiperOrigin-RevId: 341154192
|
|
PiperOrigin-RevId: 341135083
|
|
This avoids a needless allocation.
Updates #231
PiperOrigin-RevId: 341113160
|
|
We can reuse information about whether a whiteout exists on a given file path
from stepLocked when creating a file at that path. This helps save an Unlink
call to the upper filesystem if the whiteout does NOT exist (common case).
Plumbs this information from lookupLocked() -> getChildLocked() -> stepLocked().
This also helped save a Lookup in RenameAt().
Fixes #1199
PiperOrigin-RevId: 341105351
|
|
The root dentry was not created through Inode.Lookup, so we should not
release a reference even if inode.Keep() is true.
PiperOrigin-RevId: 341103220
|
|
Writes to pipes of size < PIPE_BUF are guaranteed to be atomic, so writes
larger than that will return EAGAIN if the pipe has capacity < PIPE_BUF.
Writes to eventfds will return EAGAIN if the write would cause the eventfd
value to go over the max.
In both such cases, calling Ready() on the FD will return true (because it is
possible to write), but specific kinds of writes will in fact return EAGAIN.
This CL fixes an infinite loop in splice and sendfile (VFS1 and VFS2) by
forcing skipping the readiness check for the outfile in send, splice, and tee.
PiperOrigin-RevId: 341102260
|
|
Port 0 is not meant to identify any remote port so attempting to send
a packet to it should return an error.
PiperOrigin-RevId: 341009528
|
|
PiperOrigin-RevId: 341001328
|
|
This change adds a Subnet() method to AddressableEndpoint so that we
can avoid repeated calls to AddressableEndpoint.AddressWithPrefix().Subnet().
Updates #231
PiperOrigin-RevId: 340969877
|
|
This was causing gvisor-containerd-shim to crash because the command
suceeded, but there was no stat present.
PiperOrigin-RevId: 340964921
|
|
* Remove stack.Route from incoming packet path.
There is no need to pass around a stack.Route during the incoming path
of a packet. Instead, pass around the packet's link/network layer
information in the packet buffer since all layers may need this
information.
* Support address bound and outgoing packet NIC in routes.
When forwarding is enabled, the source address of a packet may be bound
to a different interface than the outgoing interface. This change
updates stack.Route to hold both NICs so that one can be used to write
packets while the other is used to check if the route's bound address
is valid. Note, we need to hold the address's interface so we can check
if the address is a spoofed address.
* Introduce the concept of a local route.
Local routes are routes where the packet never needs to leave the stack;
the destination is stack-local. We can now route between interfaces
within a stack if the packet never needs to leave the stack, even when
forwarding is disabled.
* Always obtain a route from the stack before sending a packet.
If a packet needs to be sent in response to an incoming packet, a route
must be obtained from the stack to ensure the stack is configured to
send packets to the packet's source from the packet's destination.
* Enable spoofing if a stack may send packets from unowned addresses.
This change required changes to some netgophers since previously,
promiscuous mode was enough to let the netstack respond to all
incoming packets regardless of the packet's destination address. Now
that a stack.Route is not held for each incoming packet, finding a route
may fail with local addresses we don't own but accepted packets for
while in promiscuous mode. Since we also want to be able to send from
any address (in response the received promiscuous mode packets), we need
to enable spoofing.
* Skip transport layer checksum checks for locally generated packets.
If a packet is locally generated, the stack can safely assume that no
errors were introduced while being locally routed since the packet is
never sent out the wire.
Some bugs fixed:
- transport layer checksum was never calculated after NAT.
- handleLocal didn't handle routing across interfaces.
- stack didn't support forwarding across interfaces.
- always consult the routing table before creating an endpoint.
Updates #4688
Fixes #3906
PiperOrigin-RevId: 340943442
|
|
This was occasionally causing tests to get stuck due to races with the save
process, during which the same mutex is acquired.
PiperOrigin-RevId: 340789616
|
|
The file size can now also be verified. Also, since we are zero-padding
the last block of the data, we cannot differentiate the cases between
zero-padded block from the blocks that are ends with zeroes. With the
size included this can be addressed, as those cases would have different
file size.
PiperOrigin-RevId: 340695510
|
|
PiperOrigin-RevId: 340536306
|
|
The waits-for relationship between an epoll instance and an inotify fd should
be restored.
This fixes flaky inotify vfs2 tests.
PiperOrigin-RevId: 340531367
|
|
The default pipe size already matched linux, and is unchanged.
Furthermore `atomicIOBytes` is made a proper constant (as it is in Linux). We
were plumbing usermem.PageSize everywhere, so this is no functional change.
PiperOrigin-RevId: 340497006
|
|
PiperOrigin-RevId: 340484823
|
|
Without releasing the mutex, operations on the endpoint following a
nonblocking connect will not make progress until connect is complete.
PiperOrigin-RevId: 340467654
|
|
Use an sErr injection to trigger sigbus when we receive EFAULT from the
run ioctl.
After applying this patch, mmap_test_runsc_kvm will be passed on
Arm64.
Signed-off-by: Bin Lu <bin.lu@arm.com>
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/4542 from lubinszARM:pr_kvm_mmap_1 f81bd42466d1d60a581e5fb34de18b78878c68c1
PiperOrigin-RevId: 340461239
|
|
PiperOrigin-RevId: 340389884
|
|
Don't return the filename, since it can already be determined by the caller.
This was causing a panic in RenameAt, which relied on the name to be nonempty
even if the error was EEXIST.
Reported-by: syzbot+e9f117d000301e42361f@syzkaller.appspotmail.com
PiperOrigin-RevId: 340381946
|
|
Send NUD probes in another gorountine to free the thread of execution for
finishing the state transition. This is necessary to avoid deadlock where
sending and processing probes are done in the same call stack, such as loopback
and integration tests.
Fixes #4701
PiperOrigin-RevId: 340362481
|
|
PiperOrigin-RevId: 340361998
|