Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 288743614
|
|
Updates #1195
PiperOrigin-RevId: 288725745
|
|
PacketLooping is already a member on the passed Route.
PiperOrigin-RevId: 288721500
|
|
...enabling us to remove the "CreateNamedLoopbackNIC" variant of
CreateNIC and all the plumbing to connect it through to where the value
is read in FindRoute.
PiperOrigin-RevId: 288713093
|
|
PiperOrigin-RevId: 288642552
|
|
Support deprecating network endpoints on a NIC. If an endpoint is deprecated, it
should not be used for new connections unless a more preferred endpoint is not
available, or unless the deprecated endpoint was explicitly requested.
Test: Test that deprecated endpoints are only returned when more preferred
endpoints are not available and SLAAC addresses are deprecated after its
preferred lifetime
PiperOrigin-RevId: 288562705
|
|
Test: Test that an IPv6 link-local address is not auto-generated for loopback
NICs, even when it is enabled for non-loopback NICS.
PiperOrigin-RevId: 288519591
|
|
Pass the NIC-internal name to the NIC name function when generating opaque IIDs
so implementations can use the name that was provided when the NIC was created.
Previously, explicit NICID to NIC name resolution was required from the netstack
integrator.
Tests: Test that the name provided when creating a NIC is passed to the NIC name
function when generating opaque IIDs.
PiperOrigin-RevId: 288395359
|
|
Right now, we need to call ptrace(PTRACE_SYSCALL) and wait() twice to execute
one system call in a stub process. With these changes, we will need to call
ptrace + wait only once.
In addition, this allows to workaround the kernel bug when a stub process
doesn't stop on syscall-exit-stop and starts executing the next system call.
Reported-by: syzbot+37143cafa8dc3b5008ee@syzkaller.appspotmail.com
PiperOrigin-RevId: 288393029
|
|
- Renamed memfs to tmpfs.
- Copied fileRangeSet bits from fs/fsutil/ to fsimpl/tmpfs/
- Changed tmpfs to be backed by filemem instead of byte slice.
- regularFileReadWriter uses a sync.Pool, similar to gofer client.
PiperOrigin-RevId: 288356380
|
|
PiperOrigin-RevId: 288342928
|
|
Currently, shm.Registry.FindByID will return Shm instances without taking an
additional reference on them, making it possible for them to disappear.
More explicitly handle references. All callers hold a reference for the
duration that they hold the instance. Registry.shms may transitively hold Shms
with no references, so it must TryIncRef to determine if they are still valid.
PiperOrigin-RevId: 288314529
|
|
Support using opaque interface identifiers when generating IPv6 addresses via
SLAAC when configured to do so.
Note, this change does not handle retries in response to DAD conflicts yet.
That will also come in a later change.
Test: Test that when SLAAC addresses are generated, they use opaque interface
identifiers when configured to do so.
PiperOrigin-RevId: 288078605
|
|
PiperOrigin-RevId: 288075400
|
|
Support generating opaque interface identifiers as defined by RFC 7217 for
auto-generated IPv6 link-local addresses. Opaque interface identifiers will also
be used for IPv6 addresses auto-generated via SLAAC in a later change.
Note, this change does not handle retries in response to DAD conflicts yet.
That will also come in a later change.
Tests: Test that when configured to generated opaque IIDs, they are properly
generated as outlined by RFC 7217.
PiperOrigin-RevId: 288035349
|
|
- Add FileDescriptionOptions.UseDentryMetadata, which reduces the amount of
boilerplate needed for device FDs and the like between filesystems.
- Switch back to having FileDescription.Init() take references on the Mount and
Dentry; otherwise managing refcounts around failed calls to
OpenDeviceSpecialFile() / Device.Open() is tricky.
PiperOrigin-RevId: 287575574
|
|
Updates #1195
PiperOrigin-RevId: 287269106
|
|
Updates #1195
PiperOrigin-RevId: 287227722
|
|
PiperOrigin-RevId: 287225250
|
|
PiperOrigin-RevId: 287221280
|
|
PiperOrigin-RevId: 287217899
|
|
Added the ability to get/set the IP_RECVTOS socket option on UDP endpoints. If
enabled, TOS from the incoming Network Header passed as ancillary data in the
ControlMessages.
Test:
* Added unit test to udp_test.go that tests getting/setting as well as
verifying that we receive expected TOS from incoming packet.
* Added a syscall test
PiperOrigin-RevId: 287029703
|
|
There are 2 jobs have been finished in this patch:
1, a comment was added to explain the purpose of the extra NOPs in Vectors().
2, some merge errors were fixed.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
It was calling Dentry.InsertChild with the dentry's mutex
already locked.
Updates #1035
PiperOrigin-RevId: 286962742
|
|
- Make FilesystemImpl methods that operate on parent directories require
!rp.Done() (i.e. there is at least one path component to resolve) as
precondition and postcondition (in cases where they do not finish path
resolution due to mount boundary / absolute symlink), and require that they
do not need to follow the last path component (the file being created /
deleted) as a symlink. Check for these in VFS.
- Add FilesystemImpl.GetParentDentryAt(), which is required to obtain the old
parent directory for VFS.RenameAt(). (Passing the Dentry to be renamed
instead has the wrong semantics if the file named by the old path is a mount
point since the Dentry will be on the wrong Mount.)
- Update memfs to implement these methods correctly (?), including RenameAt.
- Change fspath.Parse() to allow empty paths (to simplify implementation of
AT_EMPTY_PATH).
- Change vfs.PathOperation to take a fspath.Path instead of a raw pathname;
non-test callers will need to fspath.Parse() pathnames themselves anyway in
order to detect absolute paths and select PathOperation.Start accordingly.
PiperOrigin-RevId: 286934941
|
|
This change supports clearing all host-only NDP state when NICs become routers.
All discovered routers, discovered on-link prefixes and auto-generated addresses
will be invalidated when becoming a router. This is because normally, routers do
not process Router Advertisements to discover routers or on-link prefixes, and
do not do SLAAC.
Tests: Unittest to make sure that all discovered routers, discovered prefixes
and auto-generated addresses get invalidated when transitioning from a host to
a router.
PiperOrigin-RevId: 286902309
|
|
Linux PTRACE_SYSEMU support on arm64 was merged to mainline from
V5.3, and the corresponding support in go also enabled recently.
Since the "syscall" package is locked down from go 1.4, so the ptrace
PTRACE_SYSEMU definition can't be added to package "syscall" on arm64.
According to the golang community, updates required by new systems or
versions should use the corresponding package in the golang.org/x/sys
repository instead(https://golang.org/pkg/syscall/).
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I2f917bb2be62f990c3e158e2bb99e094ea03f751
|
|
PiperOrigin-RevId: 286666533
|
|
PiperOrigin-RevId: 286660774
|
|
PiperOrigin-RevId: 286639163
|
|
PiperOrigin-RevId: 286616668
|
|
Otherwise, CopyInFDSet will try to allocate a negative-length slice.
PiperOrigin-RevId: 286584907
|
|
This change is needed to be compatible with the Linux kernel.
There is no glibc wrapper for the futex system call, so it is easy to
make a mistake and call syscall(__NR_futex, FUTEX_WAKE, addr) without
the fourth argument. This works on Linux, because it wakes one waiter
even if val is nonpositive.
PiperOrigin-RevId: 286494396
|
|
Otherwise a copy happens, which triggers a data race when reading
masterInodeOperations.SimpleFileOperations.uattr, which must be accessed with a
lock held.
PiperOrigin-RevId: 286464473
|
|
When listen(2) is called on an unbound socket, the socket is
automatically bound to a random free port with the local address
set to INADDR_ANY.
PiperOrigin-RevId: 286305906
|
|
PiperOrigin-RevId: 286299056
|
|
PiperOrigin-RevId: 286281274
|
|
This change removes the requirement that a new routing table be provided when a
router or prefix discovery event happens so that an updated routing table may
be provided to the stack at a later time from the event.
This change is to address the use case where the netstack integrator may need to
obtain a lock before providing updated routes in response to the events above.
As an example, say we have an integrator that performs the below two operations
operations as described:
A. Normal route update:
1. Obtain integrator lock
2. Update routes in the integrator
3. Call Stack.SetRouteTable with the updated routes
3.1. Obtain Stack lock
3.2. Update routes in Stack
3.3. Release Stack lock
4. Release integrator lock
B. NDP event triggered route update:
1. Obtain Stack lock
2. Call event handler
2.1. Obtain integrator lock
2.2. Update routes in the integrator
2.3. Release integrator lock
2.4. Return updated routes to update Stack
3. Update routes in Stack
4. Release Stack lock
A deadlock may occur if a Normal route update was attemped at the same time an
NDP event triggered route update was attempted. With threads T1 and T2:
1) T1 -> A.1, A.2
2) T2 -> B.1
3) T1 -> A.3 (hangs at A.3.1 since Stack lock is taken in step 2)
4) T2 -> B.2 (hangs at B.2.1 since integrator lock is taken in step 1)
Test: Existing tests were modified to not provide or expect routing table
changes in response to Router and Prefix discovery events.
PiperOrigin-RevId: 286274712
|
|
PiperOrigin-RevId: 286259750
|
|
This change makes sure that test variables are captured before running tests
in parallel, and removes unneeded buffered channel allocations. This change also
removes unnecessary timeouts.
PiperOrigin-RevId: 286255066
|
|
PiperOrigin-RevId: 286248378
|
|
Several jobs were finished in this patch:
1, provide functions to get/set fpcr/fpsr/vregs
2, support lazy-fpsimd-context-switch in el1
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
This is called after fork, so it must be nosplit.
Updates #1408
PiperOrigin-RevId: 286053054
|
|
PiperOrigin-RevId: 286051631
|
|
PiperOrigin-RevId: 286042427
|
|
PiperOrigin-RevId: 286003946
|
|
These comments provided nothing, and have been copy-pasted into all
implementations. The code is clear without them.
I considered also removing the "handle implements handler.handle" comments, but
will let those stay for now.
PiperOrigin-RevId: 285876428
|
|
PiperOrigin-RevId: 285874181
|
|
Bitshift operators with signed int is supported in Go 1.13.
PiperOrigin-RevId: 285853622
|
|
Add checks for input arguments, file type, permissions, etc. that match
the Linux implementation. A call to get/setxattr that passes all the
checks will still currently return EOPNOTSUPP. Actual support will be
added in following commits.
Only allow user.* extended attributes for the time being.
PiperOrigin-RevId: 285835159
|