Age | Commit message (Collapse) | Author |
|
Previously, we did not check the kcov mode when performing task work. As a
result, disabling kcov did not do anything.
Also avoid expensive atomic RMW when consuming coverage data. We don't need the
swap if the value is already zero (which is most of the time), and it is ok if
there are slight inconsistencies due to a race between coverage data generation
(incrementing the value) and consumption (reading a nonzero value and writing
zero).
PiperOrigin-RevId: 334049207
|
|
Generic ICMP errors were required because the transport dispatcher was
given the responsibility of sending ICMP errors in response to transport
packet delivery failures. Instead, the transport dispatcher should let
network layer know it failed to deliver a packet (and why) and let the
network layer make the decision as to what error to send (if any).
Fixes #4068
PiperOrigin-RevId: 333962333
|
|
PiperOrigin-RevId: 333591566
|
|
The FD should hold a reference on the dentry they were opened on which in turn
holds a reference on the inode it points to.
PiperOrigin-RevId: 333589223
|
|
The previous value was for unix
PiperOrigin-RevId: 333571962
|
|
Update signatures for:
- All methods in inodeDirectory
- deferDecRef() and Filesystem.droppedDentries
- newSyntheticDirectory()
- `slot`s used in OrderedChildren and subsequent methods like
replaceChildLocked() and checkExistingLocked()
- stepExistingLocked(), walkParentDirLocked(), checkCreateLocked()
Updates #1193
PiperOrigin-RevId: 333558866
|
|
Updates #1663
PiperOrigin-RevId: 333539293
|
|
segment_queue today has its own standalone limit of MaxUnprocessedSegments but
this can be a problem in UnlockUser() we do not release the lock till there are
segments to be processed. What can happen is as handleSegments dequeues packets
more keep getting queued and we will never release the lock. This can keep
happening even if the receive buffer is full because nothing can read() till we
release the lock.
Further having a separate limit for pending segments makes it harder to track
memory usage etc. Unifying the limits makes it easier to reason about memory in
use and makes the overall buffer behaviour more consistent.
PiperOrigin-RevId: 333508122
|
|
It is called from the kernfs code (OpenAt and revalidateChildLocked()).
For RemoveChildLocked, it is opposed. We need to call it from fuse.RmDir and
fuse.Unlink.
PiperOrigin-RevId: 333453218
|
|
PiperOrigin-RevId: 333447255
|
|
There were some instances where we were not enabling leak checking.
PiperOrigin-RevId: 333418571
|
|
PiperOrigin-RevId: 333412836
|
|
PiperOrigin-RevId: 333405169
|
|
PiperOrigin-RevId: 333404727
|
|
Store transport protocol number on packet buffers for use in ICMP error
generation.
Updates #2211.
PiperOrigin-RevId: 333252762
|
|
Use HandleIOErrorVFS2 instead of custom error handling.
PiperOrigin-RevId: 333227581
|
|
This change changes `buffer.data` into a `[]byte`, from `[bufferSize]byte`.
In exchange, each `buffer` is now grouped together to reduce the number of
allocation. Plus, `View` now holds an embeded list of `buffer` (via `pool`) to
support the happy path which the number of buffer is small. Expect no extra
allocation for the happy path.
It is to enable the use case for PacketBuffer, which
* each `View` is small (way less than `defaultBufferSize`), and
* needs to dynamically transfer ownership of `[]byte` to `View`.
(to allow gradual migration)
PiperOrigin-RevId: 333197252
|
|
The new testutil.MockLinkEndpoint implementation is not composed by
channel.Channel anymore because none of its features were used.
PiperOrigin-RevId: 333167753
|
|
Update signatures for:
- walkExistingLocked
- checkDeleteLocked
- Inode.Open
Updates #1193
PiperOrigin-RevId: 333163381
|
|
When printing flags, FlagSet.PrintDefaults compares the Zero
value to the flag default value. The Zero refs.LeakMode value
was panicking in String() because it didn't expect the default
to be used
Closes #4023
PiperOrigin-RevId: 333150836
|
|
PiperOrigin-RevId: 333138701
|
|
Originally, we avoided partial writes in case it caused us to write a partial
packet to a socket-backed specialFileFD. However, this check causes splicing
from a pipe to specialFileFD to fail if we hit EOF on the pipe.
PiperOrigin-RevId: 333016216
|
|
Updates #1193.
PiperOrigin-RevId: 332939026
|
|
PiperOrigin-RevId: 332760843
|
|
PiperOrigin-RevId: 332548335
|
|
Updates #1199
PiperOrigin-RevId: 332539197
|
|
This is more consistent with Linux (see comment on MM.NewSharedAnonMappable()).
We don't do the same thing on VFS1 for reasons documented by the updated
comment.
PiperOrigin-RevId: 332514849
|
|
|
|
PiperOrigin-RevId: 332486383
|
|
PiperOrigin-RevId: 332486111
|
|
TCP needs to enqueue any send requests arriving when the connection is in
SYN_SENT state. The data should be sent out soon after completion of the
connection handshake.
Fixes #3995
PiperOrigin-RevId: 332482041
|
|
Linux defines this struct as:
struct sched_param {
int priority;
}
... in include/linux/sched.h.
PiperOrigin-RevId: 332473133
|
|
Extract parsing utilities so they can be used by the sniffer.
Fixes #3930
PiperOrigin-RevId: 332401880
|
|
This fixes a use-after-free in fuse.DeviceFD.Release.
PiperOrigin-RevId: 332394146
|
|
IPv6 tests will be added in another CL along with ip6tables.
PiperOrigin-RevId: 332389102
|
|
`ip6tables -t filter` is now usable. NAT support will come in a future CL.
#3549
PiperOrigin-RevId: 332381801
|
|
SO_LINGER is a socket level option and should be stored on all endpoints even
though it is used to linger only for TCP endpoints.
PiperOrigin-RevId: 332369252
|
|
Docker does not have IPv6 port forwarding as tracked by the following issue:
https://github.com/moby/moby/issues/11518
So when running bazel itself inside a docker container, we can not use the host
port bindings to communicate with sockets inside the container. This was causing
integration tests and image tests to fail when run through our Makefile targets.
PiperOrigin-RevId: 332355051
|
|
This constant is used to represent int32 stored in file xattrs. The
integers are stored as strings there, so the real size should be the
string size (number of digits) instead of an int size (4 bytes).
PiperOrigin-RevId: 332353217
|
|
PiperOrigin-RevId: 332340342
|
|
This change includes overlay, special regular gofer files, and hostfs.
Fixes #3589.
PiperOrigin-RevId: 332330860
|
|
PiperOrigin-RevId: 332328860
|
|
This is required to make tcpdump work. tcpdump falls back to not using things
like PACKET_RX_RING if setsockopt returns ENOPROTOOPT. This used to be the case
before https://github.com/google/gvisor/commit/6f8fb7e0db2790ff1f5ba835780c03fe245e437f.
Fixes #3981
PiperOrigin-RevId: 332326517
|
|
|
|
As noticed by @ayushr2, the "implements" comments are not
consistent, e.g.
// IterDirents implements kernfs.inodeDynamicLookup.
// Generate implements vfs.DynamicBytesSource.Generate.
This patch improves this by making the comments like this
consistently include the package name (when the interface
and struct are not in the same package) and method name.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
|
|
PiperOrigin-RevId: 332122081
|
|
OpenAt() for verity fs is implemented by opening both the target file or
directory and the corresponding Merkle tree file in the underlying file
system. Generally they are only open for read. In allowRuntimeEnable
mode, the Merkle tree file is also open for write.
PiperOrigin-RevId: 332116423
|
|
PiperOrigin-RevId: 332097286
|
|
The lifetime of addreses in a loopback interface's associated subnets
should be bound to their respective permanent addresses.
This change also fixes a race when the stack attempts to get an IPv4
rereferencedNetworkEndpoint for an address in an associated subnet on
a loopback interface. Before this change, the stack would only check
if an IPv4 address is contained in an associated subnet while holding
a read lock but wouldn't do this same check after releasing the read
lock for a write lock to create a temporary address. This may cause
the stack to bind the lifetime of the address to a new (temporary)
endpoint instead of the associated subnet's permanent address.
Test: integration_test.TestLoopbackSubnetLifetimeBoundToAddr
PiperOrigin-RevId: 332094719
|
|
PRead is implemented by read from the underlying file in blocks, and
verify each block. The verified contents are saved into the output
buffer.
PiperOrigin-RevId: 332092267
|