summaryrefslogtreecommitdiffhomepage
path: root/pkg
AgeCommit message (Collapse)Author
2019-06-27Cache directory entries in the overlayMichael Pratt
Currently, the overlay dirCache is only used for a single logical use of getdents. i.e., it is discard when the FD is closed or seeked back to the beginning. But the initial work of getting the directory contents can be quite expensive (particularly sorting large directories), so we should keep it as long as possible. This is very similar to the readdirCache in fs/gofer. Since the upper filesystem does not have to allow caching readdir entries, the new CacheReaddir MountSourceOperations method controls this behavior. This caching should be trivially movable to all Inodes if desired, though that adds an additional copy step for non-overlay Inodes. (Overlay Inodes already do the extra copy). PiperOrigin-RevId: 255477592
2019-06-27gvisor/ptrace: grub initial thread registers only onceAndrei Vagin
PiperOrigin-RevId: 255465635
2019-06-26Preserve permissions when checking lowerFabricio Voznika
The code was wrongly assuming that only read access was required from the lower overlay when checking for permissions. This allowed non-writable files to be writable in the overlay. Fixes #316 PiperOrigin-RevId: 255263686
2019-06-26Follow symlinks when creating a file, and create the target.Nicolas Lacasse
If we have a symlink whose target does not exist, creating the symlink (either via 'creat' or 'open' with O_CREAT flag) should create the target of the symlink. Previously, gVisor would error with EEXIST in this case PiperOrigin-RevId: 255232944
2019-06-25Add TODO reminder to remove tmpfs caching optionsMichael Pratt
Updates #179 PiperOrigin-RevId: 255081565
2019-06-25Add //pkg/fdchannel.Jamie Liu
To accompany flipcall connections in cases where passing FDs is required (as for gofers). PiperOrigin-RevId: 255062277
2019-06-25gvisor: lockless read access for task credentialsAndrei Vagin
Credentials are immutable and even before these changes we could read them without locks, but we needed to take a task lock to get a credential object from a task object. It is possible to avoid this lock, if we will guarantee that a credential object will not be changed after setting it on a task. PiperOrigin-RevId: 254989492
2019-06-24fs: synchronize concurrent writes into files with O_APPENDAndrei Vagin
For files with O_APPEND, a file write operation gets a file size and uses it as offset to call an inode write operation. This means that all other operations which can change a file size should be blocked while the write operation doesn't complete. PiperOrigin-RevId: 254873771
2019-06-24Add O_EXITKILL to ptrace options.Adin Scannell
This prevents a race before PDEATH_SIG can take effect during a sentry crash. Discovered and solution by avagin@. PiperOrigin-RevId: 254871534
2019-06-24Implement /proc/net/tcp.Rahat Mahmood
PiperOrigin-RevId: 254854346
2019-06-24platform/ptrace: specify PTRACE_O_TRACEEXIT for stub-processesAndrei Vagin
The tracee is stopped early during process exit, when registers are still available, allowing the tracer to see where the exit occurred, whereas the normal exit notifi? cation is done after the process is finished exiting. Without this option, dumpAndPanic fails to get registers. PiperOrigin-RevId: 254852917
2019-06-24Use correct statx syscall number for amd64.Nicolas Lacasse
The previous number was for the arm architecture. Also change the statx tests to force them to run on gVisor, which would have caught this issue. PiperOrigin-RevId: 254846831
2019-06-24Allow to change logging options using 'runsc debug'Fabricio Voznika
New options are: runsc debug --strace=off|all|function1,function2 runsc debug --log-level=warning|info|debug runsc debug --log-packets=true|false Updates #407 PiperOrigin-RevId: 254843128
2019-06-22Implement statx.Nicolas Lacasse
We don't have the plumbing for btime yet, so that field is left off. The returned mask indicates that btime is absent. Fixes #343 PiperOrigin-RevId: 254575752
2019-06-21Fix the logic for sending zero window updates.Bhasker Hariharan
Today we have the logic split in two places between endpoint Read() and the worker goroutine which actually sends a zero window. This change makes it so that when a zero window ACK is sent we set a flag in the endpoint which can be read by the endpoint to decide if it should notify the worker to send a nonZeroWindow update. The worker now does not do the check again but instead sends an ACK and flips the flag right away. Similarly today when SO_RECVBUF is set the SetSockOpt call has logic to decide if a zero window update is required. Rather than do that we move the logic to the worker goroutine and it can check the zeroWindow flag and send an update if required. PiperOrigin-RevId: 254505447
2019-06-21gvisor/fs: getdents returns 0 if offset is equal to FileMaxOffsetAndrei Vagin
FileMaxOffset is a special case when lseek(d, 0, SEEK_END) has been called. PiperOrigin-RevId: 254498777
2019-06-21Remove O(n) lookup on unlink/renameMichael Pratt
Currently, the path tracking in the gofer involves an O(n) lookup of child fidRefs. This causes a significant overhead on unlinks in directories with lots of child fidRefs (<4k). In this transition, pathNode moves from sync.Map to normal synchronized maps. There is a small chance of contention in walk, but the lock is held for a very short time (and sync.Map also had a chance of requiring locking). OTOH, sync.Map makes it very difficult to add a fidRef reverse map. PiperOrigin-RevId: 254489952
2019-06-21Deflake TestSimpleReceive failures due to timeoutsBrad Burlage
This test will occasionally fail waiting to read a packet. From repeated runs, I've seen it up to 1.5s for waitForPackets to complete. PiperOrigin-RevId: 254484627
2019-06-21ext4 block group descriptor implementation in disk layout package.Ayush Ranjan
PiperOrigin-RevId: 254482180
2019-06-21Add //pkg/flipcall.Jamie Liu
Flipcall is a (conceptually) simple local-only RPC mechanism. Compared to unet, Flipcall does not support passing FDs (support for which will be provided out of band by another package), requires users to establish connections manually, and requires user management of concurrency since each connected Endpoint pair supports only a single RPC at a time; however, it improves performance by using shared memory for data (reducing memory copies) and using futexes for control signaling (which is much cheaper than sendto/recvfrom/sendmsg/recvmsg). PiperOrigin-RevId: 254471986
2019-06-21Add list of stuck tasks to panic messageFabricio Voznika
PiperOrigin-RevId: 254450309
2019-06-21Update pathNode documentation to reflect realityMichael Pratt
Neither fidRefs or children are (directly) synchronized by mu. Remove the preconditions that say so. That said, the surrounding does enforce some synchronization guarantees (e.g., fidRef.renameChildTo does not atomically replace the child in the maps). I've tried to note the need for callers to do this synchronization. I've also renamed the maps to what are (IMO) clearer names. As is, it is not obvious that pathNode.fidRefs is a map of *child* fidRefs rather than self fidRefs. PiperOrigin-RevId: 254446965
2019-06-21kernel: call t.mu.Unlock() explicitly in WithMuLockedAndrei Vagin
defer here doesn't improve readability, but we know it slower that the explicit call. PiperOrigin-RevId: 254441473
2019-06-21Update commentFabricio Voznika
PiperOrigin-RevId: 254428866
2019-06-20Preallocate auth.NewAnonymousCredentials() in contexttest.TestContext.Jamie Liu
Otherwise every call to, say, fs.ContextCanAccessFile() in a benchmark using contexttest allocates new auth.Credentials, a new auth.UserNamespace, ... PiperOrigin-RevId: 254261051
2019-06-20Add package docs to seqfile and ramfsMichael Pratt
These are the only packages missing docs: https://godoc.org/gvisor.dev/gvisor PiperOrigin-RevId: 254261022
2019-06-20Unmark amutex_test as flaky.Rahat Mahmood
PiperOrigin-RevId: 254254058
2019-06-20Implement madvise(MADV_DONTFORK)Neel Natu
PiperOrigin-RevId: 254253777
2019-06-19Deflake SendFileTest_Shutdown.Ian Gudger
The sendfile syscall's backing doSplice contained a race with regard to blocking. If the first attempt failed with syserror.ErrWouldBlock and then the blocking file became ready before registering a waiter, we would just return the ErrWouldBlock (even if we were supposed to block). PiperOrigin-RevId: 254114432
2019-06-19Add renamed children pathNodes to target parentMichael Pratt
Otherwise future renames may miss Renamed calls. PiperOrigin-RevId: 254060946
2019-06-19fileOp{On,At} should pass the remaning symlink traversal count.Nicolas Lacasse
And methods that do more traversals should use the remaining count rather than resetting. PiperOrigin-RevId: 254041720
2019-06-19Add MountNamespace to task.Nicolas Lacasse
This allows tasks to have distinct mount namespace, instead of all sharing the kernel's root mount namespace. Currently, the only way for a task to get a different mount namespace than the kernel's root is by explicitly setting a different MountNamespace in CreateProcessArgs, and nothing does this (yet). In a follow-up CL, we will set CreateProcessArgs.MountNamespace when creating a new container inside runsc. Note that "MountNamespace" is a poor term for this thing. It's more like a distinct VFS tree. When we get around to adding real mount namespaces, this will need a better naem. PiperOrigin-RevId: 254009310
2019-06-18Attempt to fix TestPipeWritesAccumulateFabricio Voznika
Test fails because it's reading 4KB instead of the expected 64KB. Changed the test to read pipe buffer size instead of hardcode and added some logging in case the reason for failure was not pipe buffer size. PiperOrigin-RevId: 253916040
2019-06-18gvisor/fs: don't update file.offset for sockets, pipes, etcAndrei Vagin
sockets, pipes and other non-seekable file descriptors don't use file.offset, so we don't need to update it. With this change, we will be able to call file operations without locking the file.mu mutex. This is already used for pipes in the splice system call. PiperOrigin-RevId: 253746644
2019-06-13Add support for TCP receive buffer auto tuning.Bhasker Hariharan
The implementation is similar to linux where we track the number of bytes consumed by the application to grow the receive buffer of a given TCP endpoint. This ensures that the advertised window grows at a reasonable rate to accomodate for the sender's rate and prevents large amounts of data being held in stack buffers if the application is not actively reading or not reading fast enough. The original paper that was used to implement the linux receive buffer auto- tuning is available @ https://public.lanl.gov/radiant/pubs/drs/lacsi2001.pdf NOTE: Linux does not implement DRS as defined in that paper, it's just a good reference to understand the solution space. Updates #230 PiperOrigin-RevId: 253168283
2019-06-13Plumb context through more layers of filesytem.Ian Gudger
All functions which allocate objects containing AtomicRefCounts will soon need a context. PiperOrigin-RevId: 253147709
2019-06-13Fix deadlock in fasync.Ian Gudger
The deadlock can occur when both ends of a connected Unix socket which has FIOASYNC enabled on at least one end are closed at the same time. One end notifies that it is closing, calling (*waiter.Queue).Notify which takes waiter.Queue.mu (as a read lock) and then calls (*FileAsync).Callback, which takes FileAsync.mu. The other end tries to unregister for notifications by calling (*FileAsync).Unregister, which takes FileAsync.mu and calls (*waiter.Queue).EventUnregister which takes waiter.Queue.mu. This is fixed by moving the calls to waiter.Waitable.EventRegister and waiter.Waitable.EventUnregister outside of the protection of any mutex used in (*FileAsync).Callback. The new test is related, but does not cover this particular situation. Also fix a data race on FileAsync.e.Callback. (*FileAsync).Callback checked FileAsync.e.Callback under the protection of FileAsync.mu, but the waiter calling (*FileAsync).Callback could not and did not. This is fixed by making FileAsync.e.Callback immutable before passing it to the waiter for the first time. Fixes #346 PiperOrigin-RevId: 253138340
2019-06-13Implement getsockopt() SO_DOMAIN, SO_PROTOCOL and SO_TYPE.Rahat Mahmood
SO_TYPE was already implemented for everything but netlink sockets. PiperOrigin-RevId: 253138157
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-06-13Add p9 and unet benchmarks.Jamie Liu
PiperOrigin-RevId: 253122166
2019-06-12Minor BUILD file cleanup.Adin Scannell
PiperOrigin-RevId: 252918338
2019-06-12Add support for TCP_CONGESTION socket option.Bhasker Hariharan
This CL also cleans up the error returned for setting congestion control which was incorrectly returning EINVAL instead of ENOENT. PiperOrigin-RevId: 252889093
2019-06-12gvisor/ptrace: print guest registers if a stub stopped with unexpected codeAndrei Vagin
PiperOrigin-RevId: 252855280
2019-06-11Eat sendfile partial errorAdin Scannell
For sendfile(2), we propagate a TCP error through the system call layer. This should be eaten if there is a partial result. This change also adds a test to ensure that there is no panic in this case, for both TCP sockets and unix domain sockets. PiperOrigin-RevId: 252746192
2019-06-11Add support to mount pod shared tmpfs mountsFabricio Voznika
Parse annotations containing 'gvisor.dev/spec/mount' that gives hints about how mounts are shared between containers inside a pod. This information can be used to better inform how to mount these volumes inside gVisor. For example, a volume that is shared between containers inside a pod can be bind mounted inside the sandbox, instead of being two independent mounts. For now, this information is used to allow the same tmpfs mounts to be shared between containers which wasn't possible before. PiperOrigin-RevId: 252704037
2019-06-10Add introspection for Linux/AMD64 syscallsIan Lewis
Adds simple introspection for syscall compatibility information to Linux/AMD64. Syscalls registered in the syscall table now have associated metadata like name, support level, notes, and URLs to relevant issues. Syscall information can be exported as a table, JSON, or CSV using the new 'runsc help syscalls' command. Users can use this info to debug and get info on the compatibility of the version of runsc they are running or to generate documentation. PiperOrigin-RevId: 252558304
2019-06-10Move //pkg/sentry/platform/procid to //pkg/procid.Jamie Liu
PiperOrigin-RevId: 252501653
2019-06-10Fixes to listen backlog handling.Bhasker Hariharan
Changes netstack to confirm to current linux behaviour where if the backlog is full then we drop the SYN and do not send a SYN-ACK. Similarly we allow upto backlog connections to be in SYN-RCVD state as long as the backlog is not full. We also now drop a SYN if syn cookies are in use and the backlog for the listening endpoint is full. Added new tests to confirm the behaviour. Also reverted the change to increase the backlog in TcpPortReuseMultiThread syscall test. Fixes #236 PiperOrigin-RevId: 252500462
2019-06-10Store more information in the kernel socket table.Rahat Mahmood
Store enough information in the kernel socket table to distinguish between different types of sockets. Previously we were only storing the socket family, but this isn't enough to classify sockets. For example, TCPv4 and UDPv4 sockets are both AF_INET, and ICMP sockets are SOCK_DGRAM sockets with a particular protocol. Instead of creating more sub-tables, flatten the socket table and provide a filtering mechanism based on the socket entry. Also generate and store a socket entry index ("sl" in linux) which allows us to output entries in a stable order from procfs. PiperOrigin-RevId: 252495895
2019-06-07Move //pkg/sentry/memutil to //pkg/memutil.Jamie Liu
PiperOrigin-RevId: 252124156
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 06:50:48 +0000