Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 245511019
Change-Id: Ia9562a301b46458988a6a1f0bbd5f07cbfcb0615
|
|
Packet socket receive buffers default to the sysctl value of
net.core.rmem_default and are capped by net.core.rmem_max both
which are usually set to 208KB on most systems.
Since we can't expect every gVisor user to bump these we use
SO_RCVBUFFORCE to exceed the limit. This is possible as runsc runs
with CAP_NET_ADMIN outside the sandbox and can do this before
the FD is passed to the sentry inside the sandbox.
Updates #211
iperf output w/ 4MB buffer.
iperf3 -c 172.17.0.2 -t 100
Connecting to host 172.17.0.2, port 5201
[ 4] local 172.17.0.1 port 40378 connected to 172.17.0.2 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 1.15 GBytes 9.89 Gbits/sec 0 1.02 MBytes
[ 4] 1.00-2.00 sec 1.18 GBytes 10.2 Gbits/sec 0 1.02 MBytes
[ 4] 2.00-3.00 sec 965 MBytes 8.09 Gbits/sec 0 1.02 MBytes
[ 4] 3.00-4.00 sec 942 MBytes 7.90 Gbits/sec 0 1.02 MBytes
[ 4] 4.00-5.00 sec 952 MBytes 7.99 Gbits/sec 0 1.02 MBytes
[ 4] 5.00-6.00 sec 1.14 GBytes 9.81 Gbits/sec 0 1.02 MBytes
[ 4] 6.00-7.00 sec 1.13 GBytes 9.68 Gbits/sec 0 1.02 MBytes
[ 4] 7.00-8.00 sec 930 MBytes 7.80 Gbits/sec 0 1.02 MBytes
[ 4] 8.00-9.00 sec 1.15 GBytes 9.91 Gbits/sec 0 1.02 MBytes
[ 4] 9.00-10.00 sec 938 MBytes 7.87 Gbits/sec 0 1.02 MBytes
[ 4] 10.00-11.00 sec 737 MBytes 6.18 Gbits/sec 0 1.02 MBytes
[ 4] 11.00-12.00 sec 1.16 GBytes 9.93 Gbits/sec 0 1.02 MBytes
[ 4] 12.00-13.00 sec 917 MBytes 7.69 Gbits/sec 0 1.02 MBytes
[ 4] 13.00-14.00 sec 1.19 GBytes 10.2 Gbits/sec 0 1.02 MBytes
[ 4] 14.00-15.00 sec 1.01 GBytes 8.70 Gbits/sec 0 1.02 MBytes
[ 4] 15.00-16.00 sec 1.20 GBytes 10.3 Gbits/sec 0 1.02 MBytes
[ 4] 16.00-17.00 sec 1.14 GBytes 9.80 Gbits/sec 0 1.02 MBytes
^C[ 4] 17.00-17.60 sec 718 MBytes 10.1 Gbits/sec 0 1.02 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-17.60 sec 18.4 GBytes 8.98 Gbits/sec 0 sender
[ 4] 0.00-17.60 sec 0.00 Bytes 0.00 bits/sec receiver
PiperOrigin-RevId: 245470590
Change-Id: I1c08c5ee8345de6ac070513656a4703312dc3c00
|
|
This CL fixes the following bugs:
- Uses atomic to set/read status instead of binary.LittleEndian.PutUint32 etc
which are not atomic.
- Increments ringOffsets for frames that are truncated (i.e status is
tpStatusCopy)
- Does not ignore frames with tpStatusLost bit set as they are valid frames and
only indicate that there some frames were lost before this one and metrics can
be retrieved with a getsockopt call.
- Adds checks to make sure blockSize is a multiple of page size. This is
required as the kernel allocates in pages per block and rejects sizes that are
not page aligned with an EINVAL.
Updates #210
PiperOrigin-RevId: 244959464
Change-Id: I5d61337b7e4c0f8a3063dcfc07791d4c4521ba1f
|
|
Support shutdown on only the read side of an endpoint. Reads performed
after a call to Shutdown with only the ShutdownRead flag will return
ErrClosedForReceive without data.
Break out the shutdown(2) with SHUT_RD syscall test into to two tests.
The first tests that no packets are sent when shutting down the read
side of a socket. The second tests that, after shutting down the read
side of a socket, unread data can still be read, or an EOF if there is
no more data to read.
Change-Id: I9d7c0a06937909cbb466b7591544a4bcaebb11ce
PiperOrigin-RevId: 244459430
|
|
Add a UDP forwarder for intercepting and forwarding UDP sessions.
Change-Id: I2d83c900c1931adfc59a532dd4f6b33a0db406c9
PiperOrigin-RevId: 244293576
|
|
It is possible to create a listening socket which will accept
IPv4 and IPv6 connections. In this case, we set IPv6ProtocolNumber
for all accepted endpoints, even if they handle IPv4 connections.
This means that we can't use endpoint.netProto to set gso.L3HdrLen.
PiperOrigin-RevId: 244227948
Change-Id: I5e1863596cb9f3d216febacdb7dc75651882eef1
|
|
RELNOTES: n/a
PiperOrigin-RevId: 244031742
Change-Id: Id0cdb73194018fb5979e67b58510ead19b5a2b81
|
|
PiperOrigin-RevId: 242704699
Change-Id: I87db368ca343b3b4bf4f969b17d3aa4ce2f8bd4f
|
|
Having raw socket code together will make it easier to add support for other raw
network protocols. Currently, only ICMP uses the raw endpoint. However, adding
support for other protocols such as UDP shouldn't be much more difficult than
adding a few switch cases.
PiperOrigin-RevId: 241564875
Change-Id: I77e03adafe4ce0fd29ba2d5dfdc547d2ae8f25bf
|
|
PiperOrigin-RevId: 241025361
Change-Id: I292e7aea9a4b294b11e4f736e107010d9524586b
|
|
The panic was caused by modifying the tree while iterating which invalidated the
iterator.
Also fixes another bug in SACKScoreboard.Insert() which was causing blocks to be
merged incorrectly.
PiperOrigin-RevId: 240895053
Change-Id: Ia72b8244297962df5c04283346da5226434740af
|
|
PiperOrigin-RevId: 240848882
Change-Id: I23dd4599f073263437aeab357c3f767e1a432b82
|
|
The linux packet socket can handle GSO packets, so we can segment packets to
64K instead of the MTU which is usually 1500.
Here are numbers for the nginx-1m test:
runsc: 579330.01 [Kbytes/sec] received
runsc-gso: 1794121.66 [Kbytes/sec] received
runc: 2122139.06 [Kbytes/sec] received
and for tcp_benchmark:
$ tcp_benchmark --duration 15 --ideal
[ 4] 0.0-15.0 sec 86647 MBytes 48456 Mbits/sec
$ tcp_benchmark --client --duration 15 --ideal
[ 4] 0.0-15.0 sec 2173 MBytes 1214 Mbits/sec
$ tcp_benchmark --client --duration 15 --ideal --gso 65536
[ 4] 0.0-15.0 sec 19357 MBytes 10825 Mbits/sec
PiperOrigin-RevId: 240809103
Change-Id: I2637f104db28b5d4c64e1e766c610162a195775a
|
|
PiperOrigin-RevId: 240642903
Change-Id: I16625015123a827d267d60b328a202057264bbd6
|
|
PiperOrigin-RevId: 240483396
Change-Id: Ie75d3ae38af83f1d92f167ff9ba58fa10f5b372b
|
|
This is a preparation for GSO changes (cl/234508902).
RELNOTES[gofers]: Refactor checksum code to include length, which
it already did, but in a convoluted way. Should be a no-op.
PiperOrigin-RevId: 240460794
Change-Id: I537381bc670b5a9f5d70a87aa3eb7252e8f5ace2
|
|
Mirror the ICMPv6 echo implementation in ICMPv4 echo. This removes
unnecessary asynchrony, reduces copying, and reduces complexity.
PiperOrigin-RevId: 240394525
Change-Id: If8f53254154f86772f5e51159765aa23b3b328b8
|
|
PiperOrigin-RevId: 239417224
Change-Id: I14a9adc31a6330a79a6156c105969cd5f1f63d20
|
|
See: https://tools.ietf.org/html/rfc6691#section-2
PiperOrigin-RevId: 239305632
Change-Id: Ie8eb912a43332e6490045dc95570709c5b81855e
|
|
PiperOrigin-RevId: 239194420
Change-Id: Ie193e8ac2b7a6db21195ac85824a335930483971
|
|
PiperOrigin-RevId: 238467634
Change-Id: If4cd8efff7386fbee1195f051d15549b495910a9
|
|
PiperOrigin-RevId: 238336475
Change-Id: I8131e04699028246ebc233953ebb3feca5673940
|
|
Previous memory allocation was excessive (80 MB). Changed
it to use 2 MB instead. There is no drop in perfomance due
to this change:
ab -n 100 -c 10 http://server/latin10m.txt ==> 10 MB file
80 MB: 178 MB/s
2 MB: 181 MB/s
PiperOrigin-RevId: 238321594
Change-Id: I1c8aed13cad5d75f4506d2b406b305117055fbe5
|
|
gonet.PacketConn now implements net.Conn, allowing it to be returned from
net.Dial.Dialer functions.
PiperOrigin-RevId: 238111980
Change-Id: I174884385ff4d9b8e9918fac7bbb5b93ca366ba7
|
|
HandleLocal is very similar conceptually to MULTICAST_LOOP, so we can unify
the implementations. This has the benefit of making HandleLocal apply even when
the fdbased link endpoint isn't in use.
In addition, move looping logic to route creation so that it doesn't need to be
run for each packet. This should improve performance.
PiperOrigin-RevId: 238099480
Change-Id: I72839f16f25310471453bc9d3fb8544815b25c23
|
|
PiperOrigin-RevId: 237559843
Change-Id: I93a9d83a08cd3d49d5fc7fcad5b0710d0aa04aaa
|
|
IP_MULTICAST_LOOP controls whether or not multicast packets sent on the default
route are looped back. In order to implement this switch, support for sending
and looping back multicast packets on the default route had to be implemented.
For now we only support IPv4 multicast.
PiperOrigin-RevId: 237534603
Change-Id: I490ac7ff8e8ebef417c7eb049a919c29d156ac1c
|
|
PiperOrigin-RevId: 236945145
Change-Id: I051760d95154ea5574c8bb6aea526f488af5e07b
|
|
PiperOrigin-RevId: 236926132
Change-Id: I5cf103f22766e6e65a581de780c7bb9ca0fa3181
|
|
...in accordance with RFCs 1112 and 2464.
Fixes IPv4 multicast when IP_MULTICAST_IF is specified.
Don't return ErrNoRoute when no route is needed.
Don't set Route.NextHop when no route is needed.
PiperOrigin-RevId: 236199813
Change-Id: I48ed33e1b7f760deaa37e18ad7f1b8b62819ab43
|
|
Broadly, this change:
* Enables sockets to be created via `socket(AF_INET, SOCK_RAW, IPPROTO_ICMP)`.
* Passes the network-layer (IP) header up the stack to the transport endpoint,
which can pass it up to the socket layer. This allows a raw socket to return
the entire IP packet to users.
* Adds functions to stack.TransportProtocol, stack.Stack, stack.transportDemuxer
that enable incoming packets to be delivered to raw endpoints. New raw sockets
of other protocols (not ICMP) just need to register with the stack.
* Enables ping.endpoint to return IP headers when created via SOCK_RAW.
PiperOrigin-RevId: 235993280
Change-Id: I60ed994f5ff18b2cbd79f063a7fdf15d093d845a
|
|
Also exposes ipv4.MaxTotalSize since it is a generally useful constant.
PiperOrigin-RevId: 235799755
Change-Id: I1fa8d5294bf355acf5527cfdf274b3687d3c8b13
|
|
An earlier CL excessively minimizes the period in which it
holds a lock on NIC. This earlier CL had done this out of
the mistaken impression it fixed a broken test, when in
fact it just reduced the rate of failure of a flaky test
in tcp_test.go. This new change holds the lock on NIC
for the duration of the loop over n.endpoints.
PiperOrigin-RevId: 235732487
Change-Id: I53ee6df264f093ddc4d29e9acdcba6b4838cb112
|
|
This change does not make use of SACK information but adds support to track
SACK information and store it in the endpoint.
The actual SACK based recovery will be in a separate CL.
Part of commits to add RFC 6675 support to Netstack.
PiperOrigin-RevId: 235612264
Change-Id: I261f94844d7bad5abda803152ce6cc6125a467ff
|
|
cl/234850781 introduced a race condition in NIC.DeliverNetworkPacket
by failing to hold a lock. This change fixes this regressesion by acquiring
a read lock before iterating through n.endpoints, and then releasing the lock
once iteration is complete.
PiperOrigin-RevId: 235549770
Change-Id: Ib0133288be512d478cf759c3314dc95ec3205d4b
|
|
PiperOrigin-RevId: 235248572
Change-Id: I5b0538b6feb365a98712c2a2d56d856fe80a8a09
|
|
This change adds support for the SO_BROADCAST socket option in gVisor Netstack.
This support includes getsockopt()/setsockopt() functionality for both UDP and
TCP endpoints (the latter being a NOOP), dispatching broadcast messages up and
down the stack, and route finding/creation for broadcast packets. Finally, a
suite of tests have been implemented, exercising this functionality through the
Linux syscall API.
PiperOrigin-RevId: 234850781
Change-Id: If3e666666917d39f55083741c78314a06defb26c
|
|
tcp_proxy now uses an AF_PACKET socket as the FD for netstack link layer
endpoint instead of a tap device. It also changes the link layer endpoint to use
PacketMMap dispatch instead of Readv. This reduces overall cpu and reflects the
current runsc setup which uses PacketMMap and also uses veth devices to receive
packets.
Also fixed a bug in gonet where Read() was not doing coalescing read and would
read small amounts at a time.
PiperOrigin-RevId: 234714768
Change-Id: Idabf8e600e4512489d3ba441c4096dc74deba5d7
|
|
This allows setting a default send interface for IPv4 multicast. IPv6 support
will come later.
PiperOrigin-RevId: 234251379
Change-Id: I65922341cd8b8880f690fae3eeb7ddfa47c8c173
|
|
SO_TIMESTAMP is reimplemented in ping and UDP sockets (and needs to be added for
TCP), but can just be implemented in epsocket for simplicity. This will also
make SIOCGSTAMP easier to implement.
PiperOrigin-RevId: 234179300
Change-Id: Ib5ea0b1261dc218c1a8b15a65775de0050fe3230
|
|
PiperOrigin-RevId: 234011346
Change-Id: Ic69375ddb3794dd0d3d6e62ee4dc60fdf4baf2c7
|
|
PACKET_RX_RING allows the use of an mmapped buffer to receive packets from the
kernel. This should cut down the number of host syscalls that need to be made
to receive packets when the underlying fd is a socket of the AF_PACKET type.
PiperOrigin-RevId: 233834998
Change-Id: I8060025c6ced206986e94cc46b8f382b81bfa47f
|
|
RFC7323 recommends that if the timestamp option was negotiated
then all packets should carry a TCP Timestamp and any packets that
do not should be dropped.
Netstack implemented this behaviour. Linux OTOH does not and will
accept such packets. This change makes Netstack behaviour compatible
with Linux.
Also now that we allow such packets, we do need to update RTO calculations
based on these packets even if timestamp option is enabled.
PiperOrigin-RevId: 233432268
Change-Id: I9f4742ae6b63930ac3b5e37d8c238761e6a4b29f
|
|
PiperOrigin-RevId: 233139020
Change-Id: I2e7089fa25d20e5662eb941054a684d41f5d3e12
|
|
Also includes a few fixes for IPv4 multicast support. IPv6 support is coming in
a followup CL.
PiperOrigin-RevId: 233008638
Change-Id: If7dae6222fef43fda48033f0292af77832d95e82
|
|
PiperOrigin-RevId: 232937200
Change-Id: I5c3709cc8f1313313ff618a45e48c14a3a111cb4
|
|
Nothing reads them and they can simply get stale.
Generated with:
$ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD
PiperOrigin-RevId: 231818945
Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
|
|
quoting what "rscheff@gmx.at" pointed out over email.
"IsLost in RFC3517 is defined as >= (DupThresh * SMSS) while
RFC6675 improves upon this, and defines IsLost as >
((DupThresh - 1) * SMSS + 1).
The latter addresses situations where partial segments (size < MSS)
are sent (eg. last segment of a http protocol message sent with PSH
being less than MSS is common)."
PiperOrigin-RevId: 231512331
Change-Id: I1addd4a92e3e7baeb0bdda46463ebfae435da958
|
|
Also adds a test for regular NIC forwarding.
PiperOrigin-RevId: 231495279
Change-Id: Ic7edec249568e9ad0280cea77eac14478c9073e1
|
|
This should reduce the number of syscalls required to process packets
significantly and improve throughputs.
PiperOrigin-RevId: 231366886
Change-Id: I8b38077262bf9c53176bc4a94b530188d3d7c0ca
|