| Age | Commit message (Collapse) | Author |
|---|
|
PiperOrigin-RevId: 269614517
|
|
This also allows the tee(2) implementation to be enabled, since dup can now be
properly supported via WriteTo.
Note that this change necessitated some minor restructoring with the
fs.FileOperations splice methods. If the *fs.File is passed through directly,
then only public API methods are accessible, which will deadlock immediately
since the locking is already done by fs.Splice. Instead, we pass through an
abstract io.Reader or io.Writer, which elide locks and use the underlying
fs.FileOperations directly.
PiperOrigin-RevId: 268805207
|
|
They are no-ops, so the standard rule works fine.
PiperOrigin-RevId: 268776264
|
|
PiperOrigin-RevId: 268757842
|
|
Fix a bug where udp.(*endpoint).Disconnect [accessible in gVisor via
epsocket.(*SocketOperations).Connect with AF_UNSPEC] would leak a port
reservation if the socket/endpoint had an ephemeral port assigned to it.
glibc's getaddrinfo uses connect with AF_UNSPEC, causing each call of
getaddrinfo to leak a port. Call getaddrinfo too many times and you run out of
ports (shows up as connect returning EAGAIN and getaddrinfo returning
EAI_NONAME "Name or service not known").
PiperOrigin-RevId: 268071160
|
|
The IPv6 all-nodes multicast address will be joined on NIC enable, and the
appropriate IPv6 solicited-node multicast address will be joined when IPv6
addresses are added.
Tests: Test receiving packets destined to the IPv6 link-local all-nodes
multicast address and the IPv6 solicted node address of an added IPv6 address.
PiperOrigin-RevId: 268047073
|
|
PiperOrigin-RevId: 267709597
|
|
There are a few cases addressed by this change
- We no longer generate a RST in response to a RST packet.
- When we receive a RST we cleanup and release all reservations immediately as
the connection is now aborted.
- An ACK received by a listening socket generates a RST when SYN cookies are not
in-use. The only reason an ACK should land at the listening socket is if we
are using SYN cookies otherwise the goroutine for the handshake in progress
should have gotten the packet and it should never have arrived at the
listening endpoint.
- Also fixes the error returned when a connection times out due to a
Keepalive timer expiration from ECONNRESET to a ETIMEDOUT.
PiperOrigin-RevId: 267238427
|
|
This also renames "subnet" to "addressRange" to avoid any more confusion with
an interface IP's subnet.
Lastly, this also removes the Stack.ContainsSubnet(..) API since it isn't used
by anyone. Plus the same information can be obtained from
Stack.NICAddressRanges().
PiperOrigin-RevId: 267229843
|
|
Make sure that NDP packets are only received if their IP header's hop limit
field is set to 255, as per RFC 4861.
PiperOrigin-RevId: 267061457
|
|
Adds support to generate Port Unreachable messages for UDP
datagrams received on a port for which there is no valid
endpoint.
Fixes #703
PiperOrigin-RevId: 267034418
|
|
The blockingpoll_unsafe.go was copied to blockingpoll_noyield_unsafe.go
during merging commit 7206202bb9439499. If it still stay here, it would
cause build errors on non-amd64 platform.
ERROR:
pkg/tcpip/link/rawfile/BUILD:5:1:
GoCompilePkg
pkg/tcpip/link/rawfile.a
failed (Exit 1) builder failed: error executing command
bazel-out/host/bin/external/go_sdk/builder compilepkg -sdk
external/go_sdk -installsuffix linux_arm64 -src
pkg/tcpip/link/rawfile/blockingpoll_noyield_unsafe.go -src ...
(remaining 33 argument(s) skipped)
Use --sandbox_debug to see verbose messages from the sandbox
compilepkg: error running subcommand: exit status 2
pkg/tcpip/link/rawfile/blockingpoll_yield_unsafe.go:35:6:
BlockingPoll redeclared in this block
previous declaration at
pkg/tcpip/link/rawfile/blockingpoll_unsafe.go:26:78
Target //pkg/tcpip/link/rawfile:rawfile failed to build
Use --verbose_failures to see the command lines of failed build steps.
INFO: Elapsed time: 25.531s, Critical Path: 21.08s
INFO: 262 processes: 262 linux-sandbox.
FAILED: Build did NOT complete successfully
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I4e21f82984225d0aa173de456f7a7c66053a053e
|
|
Wrapping "kind" into atomic access functions.
Fixes #789
PiperOrigin-RevId: 266485501
|
|
PiperOrigin-RevId: 266229756
|
|
PiperOrigin-RevId: 266000128
|
|
This allows the stack to learn remote link addresses on incoming
packets, reducing the need to ARP to send responses.
This also reduces the number of round trips to the system clock,
since that may also prove to be performance-sensitive.
Fixes #739.
PiperOrigin-RevId: 265815816
|
|
Add missing state transition to LastAck, which should happen when the
endpoint has already recieved a FIN from the remote side, and is
sending its own FIN.
PiperOrigin-RevId: 265568314
|
|
PiperOrigin-RevId: 265534854
|
|
This addresses the problem where an endpoint has its address removed but still
has outstanding references held by routes used in connected TCP/UDP sockets
which prevent the removal of the endpoint.
The fix adds a new "expired" flag to the referenced network endpoint, which is
set when an endpoint has its address removed. Incoming packets are not
delivered to an expired endpoint (unless in promiscuous mode), while sending
outgoing packets triggers an error to the caller (unless in spoofing mode).
In addition, a few helper functions were added to stack_test.go to reduce
code duplications.
PiperOrigin-RevId: 265514326
|
|
This is more convenient, since it implements the interface for both
value and pointer.
PiperOrigin-RevId: 265086510
|
|
This fixes the issue of not being able to bind to either a multicast or
broadcast address as well as to send and receive data from it. The way to solve
this is to treat these addresses similar to the ANY address and register their
transport endpoint ID with the global stack's demuxer rather than the NIC's.
That way there is no need to require an endpoint with that multicast or
broadcast address. The stack's demuxer is in fact the only correct one to use,
because neither broadcast- nor multicast-bound sockets care which NIC a
packet was received on (for multicast a join is still needed to receive packets
on a NIC).
I also took the liberty of refactoring udp_test.go to consolidate a lot of
duplicate code and make it easier to create repetitive tests that test the same
feature for a variety of packet and socket types. For this purpose I created a
"flowType" that represents two things: 1) the type of packet being sent or
received and 2) the type of socket used for the test. E.g., a "multicastV4in6"
flow represents a V4-mapped multicast packet run through a V6-dual socket.
This allows writing significantly simpler tests. A nice example is testTTL().
PiperOrigin-RevId: 264766909
|
|
This is the first step in replacing some of the redundant types with the
standard library equivalents.
PiperOrigin-RevId: 264706552
|
|
PiperOrigin-RevId: 264544163
|
|
PiperOrigin-RevId: 264218306
|
|
Linux allows to call connect for ANY and the zero port.
PiperOrigin-RevId: 263892534
|
|
This adds the same logic to NIC.findEndpoint that is already done in
NIC.getRef. Since this makes the two functions very similar they were combined
into one with the originals being wrappers.
PiperOrigin-RevId: 263864708
|
|
These errors are always pointers; there's no sense in dereferencing them
in the panic call. Changed one false positive for clarity.
PiperOrigin-RevId: 263611579
|
|
13a98df rearranged some of this code in a way that broke compilation of
the netstack-only export at github.com/google/netstack because
*_state.go files are not included in that export.
This commit moves resumption logic back into *_state.go, fixing the
compilation breakage.
PiperOrigin-RevId: 263601629
|
|
Signed-off-by: Haibo Xu haibo.xu@arm.com
Change-Id: Ib6b4aa2db19032e58bf0395f714e6883caee460a
|
|
Signed-off-by: Haibo Xu haibo.xu@arm.com
Change-Id: Id4489554b9caa332695df8793d361f8332f6a13b
|
|
Signed-off-by: Haibo Xu haibo.xu@arm.com
Change-Id: I2376e502c1a860d5e624c8a8e3afab5da4c53022
|
|
This is in accordance with newer parts of the standard library.
PiperOrigin-RevId: 263449916
|
|
PiperOrigin-RevId: 263436592
|
|
SendMsg before this change would copy all the data over into a
new slice even if the underlying socket could only accept a
small amount of data. This is really inefficient with non-blocking
sockets and under high throughput where large writes could get
ErrWouldBlock or if there was say a timeout associated with the sendmsg()
syscall.
With this change we delay copying bytes in till they are needed and only
copy what can be potentially sent/held in the socket buffer. Reducing
the need to repeatedly copy data over.
Also a minor fix to change state FIN-WAIT-1 when shutdown(..., SHUT_WR) is called
instead of when we transmit the actual FIN. Otherwise the socket could remain in
CONNECTED state even though the user has called shutdown() on the socket.
Updates #627
PiperOrigin-RevId: 263430505
|
|
This better matches the standard library and allows creating connected
PacketConns.
PiperOrigin-RevId: 263187462
|
|
This stub had the wrong function signature.
PiperOrigin-RevId: 262992682
|
|
This change just introduces different congestion control states and
ensures the sender.state is updated to reflect the current state
of the connection.
It is not used for any decisions yet but this is required before
algorithms like Eiffel/PRR can be implemented.
Fixes #394
PiperOrigin-RevId: 262638292
|
|
Endpoint protocol goroutines were previously started as part of
loading the endpoint. This is potentially too soon, as resources used
by these goroutine may not have been loaded. Protocol goroutines may
perform meaningful work as soon as they're started (ex: incoming
connect) which can cause them to indirectly access resources that
haven't been loaded yet.
This CL defers resuming all protocol goroutines until the end of
restore.
PiperOrigin-RevId: 262409429
|
|
PiperOrigin-RevId: 262163794
|
|
This can happen because endpoint.Close() closes the accept channel first and
then drains/resets any accepted but not delivered connections. But there can be
connections that are connected but not delivered to the channel as the channel
was full. But closing the channel can cause these writes to fail with a write to
a closed channel.
The correct solution is to abort any connections in SYN-RCVD state and
drain/abort all completed connections before closing the accept channel.
PiperOrigin-RevId: 261951132
|
|
PiperOrigin-RevId: 261413396
|
|
PiperOrigin-RevId: 261373749
|
|
Export some readily-available fields for TCP_INFO and stub out the rest.
PiperOrigin-RevId: 261191548
|
|
The checksum was not being reset before being re-calculated and sent out.
This caused the sent checksum to always be `0x0800`.
Fixes #605.
PiperOrigin-RevId: 260965059
|
|
This doesn't currently pass on gVisor.
While I'm here, fix a bug where connecting to the v6-mapped v4 address doesn't
work in gVisor.
PiperOrigin-RevId: 260923961
|
|
PiperOrigin-RevId: 260803517
|
|
syscall.POLL is not supported on arm64, using syscall.PPOLL
to support both the x86 and arm64. refs #63
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I2c81a063d3ec4e7e6b38fe62f17a0924977f505e
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/543 from xiaobo55x:master ba598263fd3748d1addd48e4194080aa12085164
PiperOrigin-RevId: 260752049
|
|
This allows the user code to add a network address with a subnet prefix length.
The prefix length value is stored in the network endpoint and provided back to
the user in the ProtocolAddress type.
PiperOrigin-RevId: 259807693
|
|
This fixes a bug introduced in cl/251934850 that caused
connect-accept-close-connect races to result in the second connect call
failiing when it should have succeeded.
PiperOrigin-RevId: 259584525
|
|
This tweaks the handling code for IP_MULTICAST_IF to ignore the InterfaceAddr
if a NICID is given.
PiperOrigin-RevId: 258982541
|
