summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip
AgeCommit message (Collapse)Author
2019-08-07Set target address in ARP ReplyTamir Duberstein
PiperOrigin-RevId: 262163794
2019-08-06Fix for a panic due to writing to a closed accept channel.Bhasker Hariharan
This can happen because endpoint.Close() closes the accept channel first and then drains/resets any accepted but not delivered connections. But there can be connections that are connected but not delivered to the channel as the channel was full. But closing the channel can cause these writes to fail with a write to a closed channel. The correct solution is to abort any connections in SYN-RCVD state and drain/abort all completed connections before closing the accept channel. PiperOrigin-RevId: 261951132
2019-08-02Plumbing for iptables sockopts.Kevin Krakauer
PiperOrigin-RevId: 261413396
2019-08-02Automated rollback of changelist 261191548Rahat Mahmood
PiperOrigin-RevId: 261373749
2019-08-01Implement getsockopt(TCP_INFO).Rahat Mahmood
Export some readily-available fields for TCP_INFO and stub out the rest. PiperOrigin-RevId: 261191548
2019-07-31Fix ICMPv4 EchoReply packet checksumAustin Kiekintveld
The checksum was not being reset before being re-calculated and sent out. This caused the sent checksum to always be `0x0800`. Fixes #605. PiperOrigin-RevId: 260965059
2019-07-31Test connecting UDP sockets to the ANY addressTamir Duberstein
This doesn't currently pass on gVisor. While I'm here, fix a bug where connecting to the v6-mapped v4 address doesn't work in gVisor. PiperOrigin-RevId: 260923961
2019-07-30Pass ProtocolAddress instead of its fieldsTamir Duberstein
PiperOrigin-RevId: 260803517
2019-07-30Change syscall.POLL to syscall.PPOLL.Haibo Xu
syscall.POLL is not supported on arm64, using syscall.PPOLL to support both the x86 and arm64. refs #63 Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I2c81a063d3ec4e7e6b38fe62f17a0924977f505e COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/543 from xiaobo55x:master ba598263fd3748d1addd48e4194080aa12085164 PiperOrigin-RevId: 260752049
2019-07-24Add support for a subnet prefix length on interface network addressesChris Kuiper
This allows the user code to add a network address with a subnet prefix length. The prefix length value is stored in the network endpoint and provided back to the user in the ProtocolAddress type. PiperOrigin-RevId: 259807693
2019-07-23Deduplicate EndpointState.connected someTamir Duberstein
This fixes a bug introduced in cl/251934850 that caused connect-accept-close-connect races to result in the second connect call failiing when it should have succeeded. PiperOrigin-RevId: 259584525
2019-07-19Handle interfaceAddr and NIC options separately for IP_MULTICAST_IFChris Kuiper
This tweaks the handling code for IP_MULTICAST_IF to ignore the InterfaceAddr if a NICID is given. PiperOrigin-RevId: 258982541
2019-07-18net/tcp/setockopt: impelment setsockopt(fd, SOL_TCP, TCP_INQ)Andrei Vagin
PiperOrigin-RevId: 258859507
2019-07-16Internal change.gVisor bot
PiperOrigin-RevId: 258424489
2019-07-12Add IPPROTO_RAW, which allows raw sockets to write IP headers.Kevin Krakauer
iptables also relies on IPPROTO_RAW in a way. It opens such a socket to manipulate the kernel's tables, but it doesn't actually use any of the functionality. Blegh. PiperOrigin-RevId: 257903078
2019-07-12Check that IP headers contain correct versionTamir Duberstein
PiperOrigin-RevId: 257888338
2019-07-12Stub out support for TCP_MAXSEG.Bhasker Hariharan
Adds support to set/get the TCP_MAXSEG value but does not really change the segment sizes emitted by netstack or alter the MSS advertised by the endpoint. This is currently being added only to unblock iperf3 on gVisor. Plumbing this correctly requires a bit more work which will come in separate CLs. PiperOrigin-RevId: 257859112
2019-07-03netstack/udp: connect with the AF_UNSPEC address family means disconnectAndrei Vagin
PiperOrigin-RevId: 256433283
2019-07-02Merge pull request #279 from kevinGC:iptables-1-pkggVisor bot
PiperOrigin-RevId: 256231055
2019-06-27Fix various spelling issues in the documentationMichael Pratt
Addresses obvious typos, in the documentation only. COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65 PiperOrigin-RevId: 255477779
2019-06-21Fix the logic for sending zero window updates.Bhasker Hariharan
Today we have the logic split in two places between endpoint Read() and the worker goroutine which actually sends a zero window. This change makes it so that when a zero window ACK is sent we set a flag in the endpoint which can be read by the endpoint to decide if it should notify the worker to send a nonZeroWindow update. The worker now does not do the check again but instead sends an ACK and flips the flag right away. Similarly today when SO_RECVBUF is set the SetSockOpt call has logic to decide if a zero window update is required. Rather than do that we move the logic to the worker goroutine and it can check the zeroWindow flag and send an update if required. PiperOrigin-RevId: 254505447
2019-06-21Deflake TestSimpleReceive failures due to timeoutsBrad Burlage
This test will occasionally fail waiting to read a packet. From repeated runs, I've seen it up to 1.5s for waitForPackets to complete. PiperOrigin-RevId: 254484627
2019-06-13Add support for TCP receive buffer auto tuning.Bhasker Hariharan
The implementation is similar to linux where we track the number of bytes consumed by the application to grow the receive buffer of a given TCP endpoint. This ensures that the advertised window grows at a reasonable rate to accomodate for the sender's rate and prevents large amounts of data being held in stack buffers if the application is not actively reading or not reading fast enough. The original paper that was used to implement the linux receive buffer auto- tuning is available @ https://public.lanl.gov/radiant/pubs/drs/lacsi2001.pdf NOTE: Linux does not implement DRS as defined in that paper, it's just a good reference to understand the solution space. Updates #230 PiperOrigin-RevId: 253168283
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-06-12Minor BUILD file cleanup.Adin Scannell
PiperOrigin-RevId: 252918338
2019-06-12Merge branch 'master' into iptables-1-pkgKevin Krakauer
Change-Id: I7457a11de4725e1bf3811420c505d225b1cb6943
2019-06-12Add support for TCP_CONGESTION socket option.Bhasker Hariharan
This CL also cleans up the error returned for setting congestion control which was incorrectly returning EINVAL instead of ENOENT. PiperOrigin-RevId: 252889093
2019-06-10Fixes to listen backlog handling.Bhasker Hariharan
Changes netstack to confirm to current linux behaviour where if the backlog is full then we drop the SYN and do not send a SYN-ACK. Similarly we allow upto backlog connections to be in SYN-RCVD state as long as the backlog is not full. We also now drop a SYN if syn cookies are in use and the backlog for the listening endpoint is full. Added new tests to confirm the behaviour. Also reverted the change to increase the backlog in TcpPortReuseMultiThread syscall test. Fixes #236 PiperOrigin-RevId: 252500462
2019-06-10Address more comments.Kevin Krakauer
Change-Id: I83ae1079f3dcba6b018f59ab7898decab5c211d2
2019-06-07Address Ian's comments.Kevin Krakauer
Change-Id: I7445033b1970cbba3f2ed0682fe520dce02d8fad
2019-06-06Track and export socket state.Rahat Mahmood
This is necessary for implementing network diagnostic interfaces like /proc/net/{tcp,udp,unix} and sock_diag(7). For pass-through endpoints such as hostinet, we obtain the socket state from the backend. For netstack, we add explicit tracking of TCP states. PiperOrigin-RevId: 251934850
2019-06-06Add multi-fd support to fdbased endpoint.Bhasker Hariharan
This allows an fdbased endpoint to have multiple underlying fd's from which packets can be read and dispatched/written to. This should allow for higher throughput as well as better scalability of the network stack as number of connections increases. Updates #231 PiperOrigin-RevId: 251852825
2019-06-05netstack/sniffer: log GSO attributesAndrei Vagin
PiperOrigin-RevId: 251788534
2019-06-05netstack/tcp: fix calculating a number of outstanding packetsAndrei Vagin
In case of GSO, a segment can container more than one packet and we need to use the pCount() helper to get a number of packets. PiperOrigin-RevId: 251743020
2019-06-05Adjust route when looping multicast packetsChris Kuiper
Multicast packets are special in that their destination address does not identify a specific interface. When sending out such a packet the multicast address is the remote address, but for incoming packets it is the local address. Hence, when looping a multicast packet, the route needs to be tweaked to reflect this. PiperOrigin-RevId: 251739298
2019-06-04Fix data race in synRcvdState.Bhasker Hariharan
When checking the length of the acceptedChan we should hold the endpoint mutex otherwise a syn received while the listening socket is being closed can result in a data race where the cleanupLocked routine sets acceptedChan to nil while a handshake goroutine in progress could try and check it at the same time. PiperOrigin-RevId: 251537697
2019-06-03Delete debug log lines left by mistake.Bhasker Hariharan
Updates #236 PiperOrigin-RevId: 251337915
2019-05-31Disable certain tests that are flaky under race detector.Bhasker Hariharan
PiperOrigin-RevId: 250976665
2019-05-31Change segment queue limit to be of fixed size.Bhasker Hariharan
Netstack sets the unprocessed segment queue size to match the receive buffer size. This is not required as this queue only needs to hold enough for a short duration before the endpoint goroutine can process it. Updates #230 PiperOrigin-RevId: 250976323
2019-05-31Add basic iptables structures to netstack.Kevin Krakauer
Change-Id: Ib589906175a59dae315405a28f2d7f525ff8877f
2019-05-30Add build guard to files using go:linknameFabricio Voznika
Funcion signatures are not validated during compilation. Since they are not exported, they can change at any time. The guard ensures that they are verified at least on every version upgrade. PiperOrigin-RevId: 250733742
2019-05-30Fixes to TCP listen behavior.Bhasker Hariharan
Netstack listen loop can get stuck if cookies are in-use and the app is slow to accept incoming connections. Further we continue to complete handshake for a connection even if the backlog is full. This creates a problem when a lots of connections come in rapidly and we end up with lots of completed connections just hanging around to be delivered. These fixes change netstack behaviour to mirror what linux does as described here in the following article http://veithen.io/2014/01/01/how-tcp-backlog-works-in-linux.html Now when cookies are not in-use Netstack will silently drop the ACK to a SYN-ACK and not complete the handshake if the backlog is full. This will result in the connection staying in a half-complete state. Eventually the sender will retransmit the ACK and if backlog has space we will transition to a connected state and deliver the endpoint. Similarly when cookies are in use we do not try and create an endpoint unless there is space in the accept queue to accept the newly created endpoint. If there is no space then we again silently drop the ACK as we can just recreate it when the ACK is retransmitted by the peer. We also now use the backlog to cap the size of the SYN-RCVD queue for a given endpoint. So at any time there can be N connections in the backlog and N in a SYN-RCVD state if the application is not accepting connections. Any new SYNs will be dropped. This CL also fixes another small bug where we mark a new endpoint which has not completed handshake as connected. We should wait till handshake successfully completes before marking it connected. Updates #236 PiperOrigin-RevId: 250717817
2019-05-24Remove unused wakersTamir Duberstein
These wakers are uselessly allocated and passed around; nothing ever listens for notifications on them. The code here appears to be vestigial, so removing it and allowing a nil waker to be passed seems appropriate. PiperOrigin-RevId: 249879320 Change-Id: Icd209fb77cc0dd4e5c49d7a9f2adc32bf88b4b71
2019-05-22UDP and TCP raw socket support.Kevin Krakauer
PiperOrigin-RevId: 249511348 Change-Id: I34539092cc85032d9473ff4dd308fc29dc9bfd6b
2019-05-21Refactor fdbased endpoint dispatcher code.Bhasker Hariharan
This is in preparation to support an fdbased endpoint that can read/dispatch packets from multiple underlying fds. Updates #231 PiperOrigin-RevId: 249337074 Change-Id: Id7d375186cffcf55ae5e38986e7d605a96916d35
2019-05-08Set the FilesytemType in MountSource from the Filesystem.Nicolas Lacasse
And stop storing the Filesystem in the MountSource. This allows us to decouple the MountSource filesystem type from the name of the filesystem. PiperOrigin-RevId: 247292982 Change-Id: I49cbcce3c17883b7aa918ba76203dfd6d1b03cc8
2019-05-07Check GSO for nil in WritePacketGoogler
Testing: Unit tests added PiperOrigin-RevId: 247096269 Change-Id: I849c010eadcb53caf45896a15ef38162d66a9568
2019-05-07Add gonet.DialContextTCP.Ian Gudger
Allows cancellation and timeouts. PiperOrigin-RevId: 247090428 Change-Id: I91907f12e218677dcd0e0b6d72819deedbd9f20c
2019-05-05Fix raw socket behavior and tests.Kevin Krakauer
Some behavior was broken due to the difficulty of running automated raw socket tests. Change-Id: I152ca53916bb24a0208f2dc1c4f5bc87f4724ff6 PiperOrigin-RevId: 246747067
2019-05-03Update tcpip Clock description.Ian Gudger
The tcpip.Clock comment stated that times provided by it should not be used for netstack internal timekeeping. This comment was from before the interface supported monotonic times. The monotonic times that it provides are now be the preferred time source for netstack internal timekeeping. PiperOrigin-RevId: 246618772 Change-Id: I853b720e3d719b03fabd6156d2431da05d354bda
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 16:42:39 +0000