summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip
AgeCommit message (Collapse)Author
2020-06-18Support setsockopt SO_SNDBUF/SO_RCVBUF for raw/udp sockets.Bhasker Hariharan
Updates #173,#6 Fixes #2888 PiperOrigin-RevId: 317087652
2020-06-18Cleanup tcp.timer and tcpip.RouteGhanan Gowripalan
When a tcp.timer or tcpip.Route is no longer used, clean up its resources so that unused memory may be released. PiperOrigin-RevId: 317046582
2020-06-17Increase timeouts for NDP testsGhanan Gowripalan
... to help reduce flakes. When waiting for an event to occur, use a timeout of 10s. When waiting for an event to not occur, use a timeout of 1s. Test: Ran test locally w/ run count of 1000 with and without gotsan. PiperOrigin-RevId: 316998128
2020-06-17TCP stat fixesMithun Iyer
Ensure that CurrentConnected stat is updated on any errors and cleanups during connected state processing. Fixes #2968 PiperOrigin-RevId: 316919426
2020-06-16Replace use of %v in tcp testsMithun Iyer
PiperOrigin-RevId: 316767969
2020-06-15TCP to honor updated window size during handshake.Mithun Iyer
In passive open cases, we transition to Established state after initializing endpoint's sender and receiver. With this we lose out on any updates coming from the ACK that completes the handshake. This change ensures that we uniformly transition to Established in all cases and does minor cleanups. Fixes #2938 PiperOrigin-RevId: 316567014
2020-06-12Allow reading IP_MULTICAST_LOOP and IP_MULTICAST_TTL on TCP sockets.Ian Gudger
I am not really sure what the point of this is, but someone filed a bug about it, so I assume something relies on it. PiperOrigin-RevId: 316225127
2020-06-11Do not use tentative addresses for routesGhanan Gowripalan
Tentative addresses should not be used when finding a route. This change fixes a bug where a tentative address may have been used. Test: stack_test.TestDADResolve PiperOrigin-RevId: 315997624
2020-06-10Add support for SO_REUSEADDR to UDP sockets/endpoints.Ian Gudger
On UDP sockets, SO_REUSEADDR allows multiple sockets to bind to the same address, but only delivers packets to the most recently bound socket. This differs from the behavior of SO_REUSEADDR on TCP sockets. SO_REUSEADDR for TCP sockets will likely need an almost completely independent implementation. SO_REUSEADDR has some odd interactions with the similar SO_REUSEPORT. These interactions are tested fairly extensively and all but one particularly odd one (that honestly seems like a bug) behave the same on gVisor and Linux. PiperOrigin-RevId: 315844832
2020-06-10Remove duplicate and incorrect size checkTamir Duberstein
Minimum header sizes are already checked in each `case` arm below. Worse, the ICMP entries in transportProtocolMinSizes are incorrect, and produce false "raw packet" logs. PiperOrigin-RevId: 315730073
2020-06-10Replace use of %v in snifferTamir Duberstein
PiperOrigin-RevId: 315711208
2020-06-09Fix write hang bug found by syzkaller.gVisor bot
After this change e.mu is only promoted to exclusively locked during route.Resolve. It downgrades back to read-lock afterwards. This prevents the second RLock() call gets stuck later in the stack. https://syzkaller.appspot.com/bug?id=065b893bd8d1d04a4e0a1d53c578537cde1efe99 Syzkaller logs does not contain interesting stack traces. The following stack trace is obtained by running repro locally. goroutine 53 [semacquire, 3 minutes]: runtime.gopark(0xfd4278, 0x1896320, 0xc000301912, 0x4) GOROOT/src/runtime/proc.go:304 +0xe0 fp=0xc0000e25f8 sp=0xc0000e25d8 pc=0x437170 runtime.goparkunlock(...) GOROOT/src/runtime/proc.go:310 runtime.semacquire1(0xc0001220b0, 0xc00000a300, 0x1, 0x0) GOROOT/src/runtime/sema.go:144 +0x1c0 fp=0xc0000e2660 sp=0xc0000e25f8 pc=0x4484e0 sync.runtime_Semacquire(0xc0001220b0) GOROOT/src/runtime/sema.go:56 +0x42 fp=0xc0000e2690 sp=0xc0000e2660 pc=0x448132 gvisor.dev/gvisor/pkg/sync.(*RWMutex).RLock(...) pkg/sync/rwmutex_unsafe.go:76 gvisor.dev/gvisor/pkg/tcpip/transport/udp.(*endpoint).HandleControlPacket(0xc000122000, 0x7ee5, 0xc00053c16c, 0x4, 0x5e21, 0xc00053c224, 0x4, 0x1, 0x0, 0xc00007ed00) pkg/tcpip/transport/udp/endpoint.go:1345 +0x169 fp=0xc0000e26d8 sp=0xc0000e2690 pc=0x9843f9 ...... gvisor.dev/gvisor/pkg/tcpip/transport/udp.(*protocol).HandleUnknownDestinationPacket(0x18bb5a0, 0xc000556540, 0x5e21, 0xc00053c16c, 0x4, 0x7ee5, 0xc00053c1ec, 0x4, 0xc00007e680, 0x4) pkg/tcpip/transport/udp/protocol.go:143 +0xb9a fp=0xc0000e8260 sp=0xc0000e7510 pc=0x9859ba ...... gvisor.dev/gvisor/pkg/tcpip/transport/udp.sendUDP(0xc0001220d0, 0xc00053ece0, 0x1, 0x1, 0x883, 0x1405e217ee5, 0x11100a0, 0xc000592000, 0xf88780) pkg/tcpip/transport/udp/endpoint.go:924 +0x3b0 fp=0xc0000ed390 sp=0xc0000ec750 pc=0x981af0 gvisor.dev/gvisor/pkg/tcpip/transport/udp.(*endpoint).write(0xc000122000, 0x11104e0, 0xc00020a460, 0x0, 0x0, 0x0, 0x0, 0x0) pkg/tcpip/transport/udp/endpoint.go:510 +0x4ad fp=0xc0000ed658 sp=0xc0000ed390 pc=0x97f2dd PiperOrigin-RevId: 315590041
2020-06-09Handle removed NIC in NDP timer for packet txGhanan Gowripalan
NDP packets are sent periodically from NDP timers. These timers do not hold the NIC lock when sending packets as the packet write operation may take some time. While the lock is not held, the NIC may be removed by some other goroutine. This change handles that scenario gracefully. Test: stack_test.TestRemoveNICWhileHandlingRSTimer PiperOrigin-RevId: 315524143
2020-06-07netstack: parse incoming packet headers up-frontKevin Krakauer
Netstack has traditionally parsed headers on-demand as a packet moves up the stack. This is conceptually simple and convenient, but incompatible with iptables, where headers can be inspected and mangled before even a routing decision is made. This changes header parsing to happen early in the incoming packet path, as soon as the NIC gets the packet from a link endpoint. Even if an invalid packet is found (e.g. a TCP header of insufficient length), the packet is passed up the stack for proper stats bookkeeping. PiperOrigin-RevId: 315179302
2020-06-05Merge pull request #2872 from kevinGC:ipt-skip-preroutinggVisor bot
PiperOrigin-RevId: 315041419
2020-06-05iptables: loopback traffic skips prerouting chainKevin Krakauer
Loopback traffic is not affected by rules in the PREROUTING chain. This change is also necessary for istio's envoy to talk to other components in the same pod.
2020-06-05Drop flaky tag.Adin Scannell
PiperOrigin-RevId: 315018295
2020-06-05Centralize the categories of endpoint states.Rahat Mahmood
PiperOrigin-RevId: 314996457
2020-06-05Fix error code returned due to Port exhaustion.Bhasker Hariharan
For TCP sockets gVisor incorrectly returns EAGAIN when no ephemeral ports are available to bind during a connect. Linux returns EADDRNOTAVAIL. This change fixes gVisor to return the correct code and adds a test for the same. This change also fixes a minor bug for ping sockets where connect() would fail with EINVAL unless the socket was bound first. Also added tests for testing UDP Port exhaustion and Ping socket port exhaustion. PiperOrigin-RevId: 314988525
2020-06-05Fix copylocks error about copying IPTables.Ting-Yu Wang
IPTables.connections contains a sync.RWMutex. Copying it will trigger copylocks analysis. Tested by manually enabling nogo tests. sync.RWMutex is added to IPTables for the additional race condition discovered. PiperOrigin-RevId: 314817019
2020-06-05Handle TCP segment split cases as per MSS.Mithun Iyer
- Always split segments larger than MSS. Currently, we base the segment split decision as a function of the send congestion window and MSS, which could be greater than the MSS advertised by remote. - While splitting segments, ensure the PSH flag is reset when there are segments that are queued to be sent. - With TCP_CORK, hold up segments up until MSS. Fix a bug in computing available send space before attempting to coalesce segments. Fixes #2832 PiperOrigin-RevId: 314802928
2020-06-03Pass PacketBuffer as pointer.Ting-Yu Wang
Historically we've been passing PacketBuffer by shallow copying through out the stack. Right now, this is only correct as the caller would not use PacketBuffer after passing into the next layer in netstack. With new buffer management effort in gVisor/netstack, PacketBuffer will own a Buffer (to be added). Internally, both PacketBuffer and Buffer may have pointers and shallow copying shouldn't be used. Updates #2404. PiperOrigin-RevId: 314610879
2020-06-03Avoid TCP segment split when out of sender window.Mithun Iyer
If the entire segment cannot be accommodated in the receiver advertised window and if there are still unacknowledged pending segments, skip splitting the segment. The segment transmit would get retried by the retransmit handler. PiperOrigin-RevId: 314538523
2020-06-01Enable TCP Receive buffer moderation in gonet and benchmark.Bhasker Hariharan
Fixes #1666 PiperOrigin-RevId: 314148384
2020-05-29Update Go version build tagsMichael Pratt
None of the dependencies have changed in 1.15. It may be possible to simplify some of the wrappers in rawfile following 1.13, but that can come in a later change. PiperOrigin-RevId: 313863264
2020-05-29Merge pull request #2807 from kevinGC:iptables-sourcegVisor bot
PiperOrigin-RevId: 313842690
2020-05-29Update WritePacket* API to take ownership of packets to be written.Ting-Yu Wang
Updates #2404. PiperOrigin-RevId: 313834784
2020-05-29Move TCP to CLOSED from SYN-RCVD on RST.Mithun Iyer
RST handling is broken when the TCP state transitions from SYN-SENT to SYN-RCVD in case of simultaneous open. An incoming RST should trigger cleanup of the endpoint. RFC793, section 3.9, page 70. Fixes #2814 PiperOrigin-RevId: 313828777
2020-05-28Enable iptables source filtering (-s/--source)Kevin Krakauer
2020-05-27Remove linkEP from DeliverNetworkPacketSam Balana
The specified LinkEndpoint is not being used in a significant way. No behavior change, existing tests pass. This change is a breaking change. PiperOrigin-RevId: 313496602
2020-05-27Fix tiny typo.Kevin Krakauer
PiperOrigin-RevId: 313414690
2020-05-20Test that we have PAWS mechanismZeling Feng
If there is a Timestamps option in the arriving segment and SEG.TSval < TS.Recent and if TS.Recent is valid, then treat the arriving segment as not acceptable: Send an acknowledgement in reply as specified in RFC-793 page 69 and drop the segment. https://tools.ietf.org/html/rfc1323#page-19 PiperOrigin-RevId: 312590678
2020-05-20Internal change.gVisor bot
PiperOrigin-RevId: 312559963
2020-05-15Minor formatting updates for gvisor.dev.Adin Scannell
* Aggregate architecture Overview in "What is gVisor?" as it makes more sense in one place. * Drop "user-space kernel" and use "application kernel". The term "user-space kernel" is confusing when some platform implementation do not run in user-space (instead running in guest ring zero). * Clear up the relationship between the Platform page in the user guide and the Platform page in the architecture guide, and ensure they are cross-linked. * Restore the call-to-action quick start link in the main page, and drop the GitHub link (which also appears in the top-right). * Improve image formatting by centering all doc and blog images, and move the image captions to the alt text. PiperOrigin-RevId: 311845158
2020-05-13Fix TCP segment retransmit timeout handling.Mithun Iyer
As per RFC 1122 and Linux retransmit timeout handling: - The segment retransmit timeout needs to exponentially increase and cap at a predefined value. - TCP connection needs to timeout after a predefined number of segment retransmissions. - TCP connection should not timeout when the retranmission timeout exceeds MaxRTO, predefined upper bound. Fixes #2673 PiperOrigin-RevId: 311463961
2020-05-13Stub support for TCP_SYNCNT and TCP_WINDOW_CLAMP.Bhasker Hariharan
This change adds support for TCP_SYNCNT and TCP_WINDOW_CLAMP options in GetSockOpt/SetSockOpt. This change does not really change any behaviour in Netstack and only stores/returns the stored value. Actual honoring of these options will be added as required. Fixes #2626, #2625 PiperOrigin-RevId: 311453777
2020-05-11Automated rollback of changelist 310417191Bhasker Hariharan
PiperOrigin-RevId: 310963404
2020-05-11Fix view.ToVectorisedView().Bhasker Hariharan
view.ToVectorisedView() now just returns an empty vectorised view if the view is of zero length. Earlier it would return a VectorisedView of zero length but with 1 empty view. This has been a source of bugs as lower layers don't expect zero length views in VectorisedViews. VectorisedView.AppendView() now is a no-op if the view being appended is of zero length. Fixes #2658 PiperOrigin-RevId: 310942269
2020-05-08iptables - filter packets using outgoing interface.gVisor bot
Enables commands with -o (--out-interface) for iptables rules. $ iptables -A OUTPUT -o eth0 -j ACCEPT PiperOrigin-RevId: 310642286
2020-05-08Send ACK to OTW SEQs/unacc ACKs in CLOSE_WAITZeling Feng
This fixed the corresponding packetimpact test. PiperOrigin-RevId: 310593470
2020-05-07Capture range variable in parallel subtestsSam Balana
Only the last test was running before since the goroutines won't be executed until after this loop. I added t.Log(test.name) and this is was the result: TestListenNoAcceptNonUnicastV4/SourceUnspecified: DestOtherMulticast TestListenNoAcceptNonUnicastV4/DestUnspecified: DestOtherMulticast TestListenNoAcceptNonUnicastV4/DestOtherMulticast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/SourceBroadcast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/DestOurMulticast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/DestBroadcast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/SourceOtherMulticast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/SourceOurMulticast: DestOtherMulticast https://github.com/golang/go/wiki/TableDrivenTests#parallel-testing PiperOrigin-RevId: 310440629
2020-05-07Automated rollback of changelist 309339316Bhasker Hariharan
PiperOrigin-RevId: 310417191
2020-05-07Fix bugs in SACK recovery.Bhasker Hariharan
Every call to sender.NextSeg does not need to iterate from the front of the writeList as in a given recovery episode we can cache the last nextSeg returned. There cannot be a lower sequenced segment that matches the next call to NextSeg as otherwise we would have returned that instead in the previous call. This fixes the issue of excessive CPU usage w/ large send buffers where we spend a lot of time iterating from the front of the list on every NextSeg invocation. Further the following other bugs were also fixed: * Iteration of segments never sent in NextSeg() when looking for segments for retransmission that match step1/3/4 of the NextSeg algorithm * Correctly setting rescueRxt only if the rescue segment was actually sent. * Correctly initializing rescueRxt/highRxt when entering SACK recovery. * Correctly re-arming the timer only on retransmissions when SACK is in use and not for every segment being sent as it was being done before. * Copy over xmitTime and xmitCount on segment clone. * Move writeNext along when skipping over SACKED segments. This is required to prevent spurious retransmissions where we end up retransmitting data that was never lost. PiperOrigin-RevId: 310387671
2020-05-07Merge pull request #2639 from kevinGC:ipv4-frag-reassembly-testgVisor bot
PiperOrigin-RevId: 310380911
2020-05-06Add basic incoming ipv4 fragment testsKevin Krakauer
Based on ipv6's TestReceiveIPv6Fragments.
2020-05-06Do not assume no DHCPv6 configurationsGhanan Gowripalan
Do not assume that networks need any DHCPv6 configurations. Instead, notify the NDP dispatcher in response to the first NDP RA's DHCPv6 flags, even if the flags indicate no DHCPv6 configurations are available. PiperOrigin-RevId: 310245068
2020-05-06sniffer: fix accidental logging of good packets as badKevin Krakauer
We need to check vv.Size() instead of len(tcp), as tcp will always be 20 bytes long. PiperOrigin-RevId: 310218351
2020-05-05Support TCP zero window probes.Mithun Iyer
As per RFC 1122 4.2.2.17, when the remote advertizes zero receive window, the sender needs to probe for the window-size to become non-zero starting from the next retransmission interval. The TCP connection needs to be kept open as long as the remote is acknowledging the zero window probes. We reuse the retransmission timers to support this. Fixes #1644 PiperOrigin-RevId: 310021575
2020-05-01Support for connection tracking of TCP packets.Nayana Bidari
Connection tracking is used to track packets in prerouting and output hooks of iptables. The NAT rules modify the tuples in connections. The connection tracking code modifies the packets by looking at the modified tuples.
2020-05-01Regenerate SLAAC address on conflicts with the NICGhanan Gowripalan
If the NIC already has a generated SLAAC address, regenerate a new SLAAC address until one is generated that does not conflict with the NIC's existing addresses, up to a maximum of 10 attempts. This applies to both stable and temporary SLAAC addresses. Test: stack_test.TestMixedSLAACAddrConflictRegen PiperOrigin-RevId: 309495628
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 12:35:57 +0000