| Age | Commit message (Collapse) | Author |
|---|
|
PiperOrigin-RevId: 385894869
|
|
TCP is fully supported. As with SO_RCVBUF, other transport protocols perform
no-ops per DefaultSocketOptionsHandler.OnSetReceiveBufferSize.
PiperOrigin-RevId: 385023239
|
|
PiperOrigin-RevId: 384776517
|
|
Previously, two calls to set the send or receive buffer size could have raced
and left state wherein:
- The actual size depended on one call
- The value returned by getsockopt() depended on the other
PiperOrigin-RevId: 384508720
|
|
Before this change, transmission of the first router solicitation races
with the adding of an IPv6 link-local address. This change creates the
NIC in the disabled state and is only enabled after the address is added
(if required) to avoid this race.
PiperOrigin-RevId: 384493553
|
|
- Keeps Linux-specific behavior out of //pkg/tcpip
- Makes it clearer that clamping is done only for setsockopt calls from users
- Removes code duplication
PiperOrigin-RevId: 384389809
|
|
Update the following from syserror to the linuxerr equivalent:
EEXIST
EFAULT
ENOTDIR
ENOTTY
EOPNOTSUPP
ERANGE
ESRCH
PiperOrigin-RevId: 384329869
|
|
Remove "partial write" handling as io.Writer.Write is not permitted to
return a nil error on partial writes, and this code was already
panicking on non-nil errors.
PiperOrigin-RevId: 384289970
|
|
Commit 16b751b6c610ec2c5a913cb8a818e9239ee7da71 introduced a bug where writes of
zero size would end up queueing a zero sized segment which will cause the
sandbox to panic when trying to send a zero sized segment(e.g. after an RTO) as
netstack asserts that the all non FIN segments have size > 0.
This change adds the check for a zero sized payload back to avoid queueing
such segments. The associated test panics without the fix and passes with it.
PiperOrigin-RevId: 383677884
|
|
PiperOrigin-RevId: 383481745
|
|
PiperOrigin-RevId: 383426091
|
|
More-specific route discovery allows hosts to pick a more appropriate
router for off-link destinations.
Fixes #6172.
PiperOrigin-RevId: 382779880
|
|
This change makes the checklocks analyzer considerable more powerful, adding:
* The ability to traverse complex structures, e.g. to have multiple nested
fields as part of the annotation.
* The ability to resolve simple anonymous functions and closures, and perform
lock analysis across these invocations. This does not apply to closures that
are passed elsewhere, since it is not possible to know the context in which
they might be invoked.
* The ability to annotate return values in addition to receivers and other
parameters, with the same complex structures noted above.
* Ignoring locking semantics for "fresh" objects, i.e. objects that are
allocated in the local frame (typically a new-style function).
* Sanity checking of locking state across block transitions and returns, to
ensure that no unexpected locks are held.
Note that initially, most of these findings are excluded by a comprehensive
nogo.yaml. The findings that are included are fundamental lock violations.
The changes here should be relatively low risk, minor refactorings to either
include necessary annotations to simplify the code structure (in general
removing closures in favor of methods) so that the analyzer can be easily
track the lock state.
This change additional includes two changes to nogo itself:
* Sanity checking of all types to ensure that the binary and ast-derived
types have a consistent objectpath, to prevent the bug above from occurring
silently (and causing much confusion). This also requires a trick in
order to ensure that serialized facts are consumable downstream. This can
be removed with https://go-review.googlesource.com/c/tools/+/331789 merged.
* A minor refactoring to isolation the objdump settings in its own package.
This was originally used to implement the sanity check above, but this
information is now being passed another way. The minor refactor is preserved
however, since it cleans up the code slightly and is minimal risk.
PiperOrigin-RevId: 382613300
|
|
In gVisor today its possible that when trying to bind a TCP socket
w/ SO_REUSEADDR specified and requesting the kernel pick a port by
setting port to zero can result in a previously bound port being
returned. This behaviour is incorrect as the user is clearly requesting
a free port. The behaviour is fine when the user explicity specifies
a port.
This change now checks if the user specified a port when making a port
reservation for a TCP port and only returns unbound ports even if
SO_REUSEADDR was specified.
Fixes #6209
PiperOrigin-RevId: 382607638
|
|
PiperOrigin-RevId: 382427879
|
|
Update all instances of the above errors to the faster linuxerr implementation.
With the temporary linuxerr.Equals(), no logical changes are made.
PiperOrigin-RevId: 382306655
|
|
This change prepares for a later change which supports the NDP
Route Information option to discover more-specific routes, as
per RFC 4191.
Updates #6172.
PiperOrigin-RevId: 382225812
|
|
PiperOrigin-RevId: 382202462
|
|
Remove three syserror entries duplicated in linuxerr. Because of the
linuxerr.Equals method, this is a mere change of return values from
syserror to linuxerr definitions.
Done with only these three errnos as CLs removing all grow to a significantly
large size.
PiperOrigin-RevId: 382173835
|
|
When TUN is created with IFF_NO_PI flag, there will be no Ethernet header and no packet info, therefore, both read and write will fail.
This commit fix this bug.
|
|
There was a race wherein Accept() could fail, then the handshake would complete,
and then a waiter would be created to listen for the handshake. In such cases,
no notification was ever sent and the test timed out.
PiperOrigin-RevId: 381913041
|
|
sndQueue made sense when the worker goroutine and the syscall context held
different locks. Now both lock the endpoint lock before doing anything which
means adding to sndQueue is pointless as we move it to writeList immediately
after that in endpoint.Write() by calling e.drainSendQueue.
PiperOrigin-RevId: 381523177
|
|
...instead of calculating a fresh checksum to avoid re-calcalculating
a checksum on unchanged bytes.
Fixes #5340.
PiperOrigin-RevId: 381403888
|
|
This change prepares for a later change which supports the NDP
Route Information option to discover more-specific routes, as
per RFC 4191.
The newly introduced off-link route state will be used to hold
both the state for default routers (which is a default (off-link)
route through the router, and more-specific routes (which are
routes through some router to some destination subnet more specific
than the IPv6 empty subnet).
Updates #6172.
PiperOrigin-RevId: 381403761
|
|
PiperOrigin-RevId: 381375705
|
|
PiperOrigin-RevId: 380967023
|
|
There are unnecessarily short timeouts in several places.
Note: a later change will switch tcp_test to fake clocks intead of the built-in
`time` package.
PiperOrigin-RevId: 380935400
|
|
tcpdump is largely supported. We've also chose not to implement writeable
AF_PACKET sockets, and there's a bug specifically for promiscuous mode (#3333).
Fixes #173.
PiperOrigin-RevId: 380733686
|
|
Updates #5940.
PiperOrigin-RevId: 380668609
|
|
It was possible for a SYN to arrive after the endpoint sent an ACK as part of
the transition to TIME-WAIT, but before returning from handleSegmentsLocked().
This caused the SYN to be dequeued and ACK'd despite the change in
EndpointState.
Deflakes TestTCPTimeWaitNewSyn.
Tested with:
blaze test --config=gotsan --runs_per_test 10000 \
//third_party/gvisor/pkg/tcpip/transport/tcp:tcp_x_test -j 2000 \
// --test_filter TestTCPTimeWaitNewSyn
PiperOrigin-RevId: 380639808
|
|
epsByNIC.registerEndpoint can add a multiportEndpoint to its map of
nic->multiportEndpoint even if multiport.Endpoint.singleRegisterEndpoint
failed. Same for transportDemuxer.singleRegisterEndpoint which ends up adding an
entry to nic->epsByNIC even if epsByNIC.registerEndpoint fails.
These breaks an invariant which the code assumes that a
multiportEndpoint/endpointsByNIC always have at least one valid entry.
PiperOrigin-RevId: 380310115
|
|
RFC 4191 supports the notion of a preference value for default routers
and more-specific routes, so update the OffLinkRouteUpdate event to
include this preference value so integrators may prioritize routes
based on a route's advertised preference value.
Note, more-specific route discovery is not supported yet, but will be in
a later change.
Updates #6172.
Test: ndp_test.TestRouterDiscovery
PiperOrigin-RevId: 380243716
|
|
Also makes the behavior of raw sockets WRT fragmentation clearer, and makes the
ICMPv4 header-length check explicit.
Fixes #3160.
PiperOrigin-RevId: 380033450
|
|
Fixes #3159.
PiperOrigin-RevId: 379814096
|
|
This change prepares for a later change which actually handles the
Prf field in RAs to discover default routers with preference values,
as per RFC 4191.
Updates #6172.
Test: header_test.TestNDPRouterAdvert
PiperOrigin-RevId: 379421710
|
|
This change prepares for a later change which supports the NDP
Route Information option to discover more-specific routes, as
per RFC 4191.
Updates #6172.
PiperOrigin-RevId: 379361330
|
|
There are many references to unimplemented iptables features that link to #170,
but that bug is about Istio support specifically. Istio is supported, so the
references should change.
Some TODOs are addressed, some removed because they are not features requested
by users, and some are left as implementation notes.
Fixes #170.
PiperOrigin-RevId: 379328488
|
|
Before this change, the NDPDispatcher was allowed to "cancel" the
discovery of default routers/prefixes and auto-generate addresses.
No use case exists for this today so we drop this for now. If a
use case comes up in the future, we should instead invalidate the
discovered configuration through the stack instead of during
discovery.
PiperOrigin-RevId: 379327009
|
|
PiperOrigin-RevId: 378506076
|
|
Running multiple instances of netstack in the same network namespace can
cause collisions when enabling packet fanout for fdbased endpoints. The
only bulletproof fix is to run in different network namespaces, but by
using `getpid()` instead of 0 as the fanout ID starting point we can
avoid collisions in the common case, particularly when
testing/experimenting.
Addresses #6124
|
|
...as address add/removal updates multicast group memberships and NDP
state.
This partially reverts the change made to the IPv6 endpoint in
https://github.com/google/gvisor/commit/ebebb3059f7c5dbe42af85715f1c51c.
PiperOrigin-RevId: 378061726
|
|
As per https://linux.die.net/man/8/iptables,
```
Parameters
-i, --in-interface [!] name
Name of an interface via which a packet was received (only for
packets entering the INPUT, FORWARD and PREROUTING chains).
```
Before this change, iptables would use the NIC that a packet was
delivered to after forwarding a packet locally (when forwarding is
enabled) instead of the NIC the packet arrived at.
Updates #170, #3549.
Test: iptables_test.TestInputHookWithLocalForwarding
PiperOrigin-RevId: 377714971
|
|
If the ACK completing the handshake has FIN or data, requeue the segment
for further processing by the newly established endpoint. Otherwise,
the segments would have to be retransmitted by the peer to be processed
by the established endpoint. Doing this, keeps the behavior in parity
with Linux.
This also addresses a test flake with TCPNonBlockingConnectClose where
the ACK (completing the handshake) and multiple retransmitted FINACKs
from the peer could be dropped by the listener, when using syncookies
and the accept queue is full. The handshake could eventually get
completed with a retransmitted FINACK, without actual processing of
FIN. This can cause the poll with POLLRDHUP on the accepted socket to
sometimes time out before the next FINACK retransmission.
PiperOrigin-RevId: 377651695
|
|
Address a race with non-blocking connect and socket close, causing the
FIN (because of socket close) to not be sent out, even after completing
the handshake.
The race occurs with this sequence:
(1) endpoint Connect starts handshake, sending out SYN
(2) handshake complete() releases endpoint lock, waiting on sleeper.Fetch()
(3) endpoint Close acquires endpoint lock, does not enqueue FIN (as the
endpoint is not yet connected) and asserts notifyClose
(4) SYNACK from peer gets enqueued asserting newSegmentWaker
(5) handshake complete() re-aqcuires lock, first processes newSegmentWaker
event, transitions to ESTABLISHED and proceeds to protocolMainLoop()
(6) protocolMainLoop() exits while processing notifyClose
When the execution follows the above sequence, no FIN is sent to the peer.
This causes the listener side to have a half-open connection sitting in
the accept queue.
Fix this by ensuring that the protocolMainLoop() performs clean shutdown
when the endpoint state is still ESTABLISHED.
This would not be a bug, if during handshake complete(), sleeper.Fetch()
prioritized notificationWaker over newSegmentWaker. In that case, the
handshake would not have completed in (5) above.
Fixes #6067
PiperOrigin-RevId: 376994395
|
|
The current implementation has a bug where TCP listener does not ignore
RSTs from the peer. While handling RST+ACK from the peer, this bug can
complete handshakes that use syncookies. This results in half-open
connection delivered to the accept queue.
Fixes #6076
PiperOrigin-RevId: 376868749
|
|
- Typos
- Unused arguments
- Useless conversions
PiperOrigin-RevId: 376362730
|
|
Adds support for the SO_BINDTODEVICE socket option in ICMP sockets with an
accompanying packetimpact test to exercise use of this socket option.
Adds a unit test to exercise the NIC selection logic introduced by this change.
The remaining unit tests for ICMP sockets need to be added in a subsequent CL.
See https://gvisor.dev/issues/5623 for the list of remaining unit tests.
Adds a "timeout" field to PacketimpactTestInfo, necessary due to the long
runtime of the newly added packetimpact test.
Fixes #5678
Fixes #4896
Updates #5623
Updates #5681
Updates #5763
Updates #5956
Updates #5966
Updates #5967
PiperOrigin-RevId: 376271581
|
|
Testing only TestBindToDeviceDistribution decreased from 24s to 11s, and with
TSAN from 186s to 21s.
Note: using `t.Parallel()` actually slows the test down.
PiperOrigin-RevId: 376251420
|
|
...except TCP tests and NDP tests that mutate globals. These will be
undertaken later.
Updates #5940.
PiperOrigin-RevId: 376145608
|
|
- Don't shadow package name
- Don't defer in a loop
- Remove unnecessary type conversion
PiperOrigin-RevId: 376137822
|
