Age | Commit message (Collapse) | Author |
|
|
|
PiperOrigin-RevId: 326129258
|
|
|
|
NetworkEndpoints set the number on outgoing packets in Write() and
NetworkProtocols set them on incoming packets in Parse().
Needed for #3549.
PiperOrigin-RevId: 325938745
|
|
|
|
IPPacketInfo.DestinationAddr should hold the destination of the IP
packet, not the source. This change fixes that bug.
PiperOrigin-RevId: 325910766
|
|
|
|
Packets MUST NOT use a non-unicast source address for ICMP
Echo Replies.
Test: integration_test.TestPingMulticastBroadcast
PiperOrigin-RevId: 325634380
|
|
|
|
When a Neighbor Solicitation is received, a neighbor entry is created with the
remote host's link layer address, but without a link layer address resolver. If
the host decides to send a packet addressed to the IP address of that neighbor
entry, Address Resolution starts with a nil pointer to the link layer address
resolver. This causes the netstack to panic and crash.
This change ensures that when a packet is sent in that situation, the link
layer address resolver will be set before Address Resolution begins.
Tests:
pkg/tcpip/stack:stack_test
+ TestEntryUnknownToStaleToProbeToReachable
- TestNeighborCacheEntryNoLinkAddress
Updates #1889
Updates #1894
Updates #1895
Updates #1947
Updates #1948
Updates #1949
Updates #1950
PiperOrigin-RevId: 325516471
|
|
|
|
It was changed in the Linux kernel:
commit f0628c524fd188c3f9418e12478dfdfadacba815
Date: Fri Apr 24 16:06:16 2020 +0800
net: Replace the limit of TCP_LINGER2 with TCP_FIN_TIMEOUT_MAX
PiperOrigin-RevId: 325493859
|
|
|
|
Test:
- stack_test.TestJoinLeaveMulticastOnNICEnableDisable
- integration_test.TestIncomingMulticastAndBroadcast
PiperOrigin-RevId: 325185259
|
|
|
|
/proc/sys/net/ipv4/tcp_recovery is used to enable RACK loss
recovery in TCP.
PiperOrigin-RevId: 325157807
|
|
|
|
Test: integration_test.TestIncomingSubnetBroadcast
PiperOrigin-RevId: 325135617
|
|
|
|
Updates #231
PiperOrigin-RevId: 325097683
|
|
|
|
RACK (Recent Acknowledgement) is a new loss detection
algorithm in TCP. These are the fields which should be
stored on connections to implement RACK algorithm.
PiperOrigin-RevId: 324948703
|
|
|
|
This will help manage memory consumption by IP reassembly when
receiving IP fragments on multiple network endpoints. Previously,
each endpoint would cap memory consumption at 4MB, but with this
change, each IP stack will cap memory consumption at 4MB.
No behaviour changes.
PiperOrigin-RevId: 324913904
|
|
|
|
context is passed to DecRef() and Release() which is
needed for SO_LINGER implementation.
PiperOrigin-RevId: 324672584
|
|
|
|
Prevent fragments with different source-destination pairs from
conflicting with each other.
Test:
- ipv6_test.TestReceiveIPv6Fragments
- ipv4_test.TestReceiveIPv6Fragments
PiperOrigin-RevId: 324283246
|
|
Envoy (#170) uses this to get the original destination of redirected
packets.
|
|
CurrentConnected counter is incorrectly decremented on close of an
endpoint which is still not connected.
Fixes #3443
PiperOrigin-RevId: 324155171
|
|
In
https://github.com/google/gvisor/commit/ca6bded95dbce07f9683904b4b768dfc2d4a09b2
we reduced the default buffer size to 32KB. This mostly works fine except at
high throughput where we hit zero window very quickly and the TCP receive
buffer moderation is not able to grow the window. This can be seen in the
benchmarks where with a 32KB buffer and 100 connections downloading a 10MB
file we get about 30 requests/s vs the 1MB buffer gives us about 53 requests/s.
A proper fix requires a few changes to when we send a zero window as well as
when we decide to send a zero window update. Today we consider available space
below 1MSS as zero and send an update when it crosses 1MSS of available space.
This is way too low and results in the window staying very small once we hit
a zero window condition as we keep sending updates with size barely over 1MSS.
Linux and BSD are smarter about this and use different thresholds. We should
separately update our logic to match linux or BSD so that we don't send
window updates that are really tiny or wait until we drop below 1MSS to
advertise a zero window.
PiperOrigin-RevId: 324087019
|
|
Allow configuring fragmentation.Fragmentation with a fragment
block size which will be enforced when processing fragments. Also
validate arguments when processing fragments.
Test:
- fragmentation.TestErrors
- ipv6_test.TestReceiveIPv6Fragments
- ipv4_test.TestReceiveIPv6Fragments
PiperOrigin-RevId: 324081521
|
|
This change implements the Neighbor Unreachability Detection (NUD) state
machine, as per RFC 4861 [1]. The state machine operates on a single neighbor
in the local network. This requires the state machine to be implemented on each
entry of the neighbor table.
This change also adds, but does not expose, several APIs. The first API is for
performing basic operations on the neighbor table:
- Create a static entry
- List all entries
- Delete all entries
- Remove an entry by address
The second API is used for changing the NUD protocol constants on a per-NIC
basis to allow Neighbor Discovery to operate over links with widely varying
performance characteristics. See [RFC 4861 Section 10][2] for the list of
constants.
Finally, the last API is for allowing users to subscribe to NUD state changes.
See [RFC 4861 Appendix C][3] for the list of edges.
[1]: https://tools.ietf.org/html/rfc4861
[2]: https://tools.ietf.org/html/rfc4861#section-10
[3]: https://tools.ietf.org/html/rfc4861#appendix-C
Tests:
pkg/tcpip/stack:stack_test
- TestNeighborCacheAddStaticEntryThenOverflow
- TestNeighborCacheClear
- TestNeighborCacheClearThenOverflow
- TestNeighborCacheConcurrent
- TestNeighborCacheDuplicateStaticEntryWithDifferentLinkAddress
- TestNeighborCacheDuplicateStaticEntryWithSameLinkAddress
- TestNeighborCacheEntry
- TestNeighborCacheEntryNoLinkAddress
- TestNeighborCacheGetConfig
- TestNeighborCacheKeepFrequentlyUsed
- TestNeighborCacheNotifiesWaker
- TestNeighborCacheOverflow
- TestNeighborCacheOverwriteWithStaticEntryThenOverflow
- TestNeighborCacheRemoveEntry
- TestNeighborCacheRemoveEntryThenOverflow
- TestNeighborCacheRemoveStaticEntry
- TestNeighborCacheRemoveStaticEntryThenOverflow
- TestNeighborCacheRemoveWaker
- TestNeighborCacheReplace
- TestNeighborCacheResolutionFailed
- TestNeighborCacheResolutionTimeout
- TestNeighborCacheSetConfig
- TestNeighborCacheStaticResolution
- TestEntryAddsAndClearsWakers
- TestEntryDelayToProbe
- TestEntryDelayToReachableWhenSolicitedOverrideConfirmation
- TestEntryDelayToReachableWhenUpperLevelConfirmation
- TestEntryDelayToStaleWhenConfirmationWithDifferentAddress
- TestEntryDelayToStaleWhenProbeWithDifferentAddress
- TestEntryFailedGetsDeleted
- TestEntryIncompleteToFailed
- TestEntryIncompleteToIncompleteDoesNotChangeUpdatedAt
- TestEntryIncompleteToReachable
- TestEntryIncompleteToReachableWithRouterFlag
- TestEntryIncompleteToStale
- TestEntryInitiallyUnknown
- TestEntryProbeToFailed
- TestEntryProbeToReachableWhenSolicitedConfirmationWithSameAddress
- TestEntryProbeToReachableWhenSolicitedOverrideConfirmation
- TestEntryProbeToStaleWhenConfirmationWithDifferentAddress
- TestEntryProbeToStaleWhenProbeWithDifferentAddress
- TestEntryReachableToStaleWhenConfirmationWithDifferentAddress
- TestEntryReachableToStaleWhenConfirmationWithDifferentAddressAndOverride
- TestEntryReachableToStaleWhenProbeWithDifferentAddress
- TestEntryReachableToStaleWhenTimeout
- TestEntryStaleToDelay
- TestEntryStaleToReachableWhenSolicitedOverrideConfirmation
- TestEntryStaleToStaleWhenOverrideConfirmation
- TestEntryStaleToStaleWhenProbeUpdateAddress
- TestEntryStaysDelayWhenOverrideConfirmationWithSameAddress
- TestEntryStaysProbeWhenOverrideConfirmationWithSameAddress
- TestEntryStaysReachableWhenConfirmationWithRouterFlag
- TestEntryStaysReachableWhenProbeWithSameAddress
- TestEntryStaysStaleWhenProbeWithSameAddress
- TestEntryUnknownToIncomplete
- TestEntryUnknownToStale
- TestEntryUnknownToUnknownWhenConfirmationWithUnknownAddress
pkg/tcpip/stack:stack_x_test
- TestDefaultNUDConfigurations
- TestNUDConfigurationFailsForNotSupported
- TestNUDConfigurationsBaseReachableTime
- TestNUDConfigurationsDelayFirstProbeTime
- TestNUDConfigurationsMaxMulticastProbes
- TestNUDConfigurationsMaxRandomFactor
- TestNUDConfigurationsMaxUnicastProbes
- TestNUDConfigurationsMinRandomFactor
- TestNUDConfigurationsRetransmitTimer
- TestNUDConfigurationsUnreachableTime
- TestNUDStateReachableTime
- TestNUDStateRecomputeReachableTime
- TestSetNUDConfigurationFailsForBadNICID
- TestSetNUDConfigurationFailsForNotSupported
[1]: https://tools.ietf.org/html/rfc4861
[2]: https://tools.ietf.org/html/rfc4861#section-10
[3]: https://tools.ietf.org/html/rfc4861#appendix-C
Updates #1889
Updates #1894
Updates #1895
Updates #1947
Updates #1948
Updates #1949
Updates #1950
PiperOrigin-RevId: 324070795
|
|
When sending packets to a known network's broadcast address, use the
broadcast MAC address.
Test:
- stack_test.TestOutgoingSubnetBroadcast
- udp_test.TestOutgoingSubnetBroadcast
PiperOrigin-RevId: 324062407
|
|
PiperOrigin-RevId: 323715260
|
|
|
|
The previous implementation of LinkAddressRequest only supported sending
broadcast ARP requests and multicast Neighbor Solicitations. The ability to
send these packets as unicast is required for Neighbor Unreachability
Detection.
Tests:
pkg/tcpip/network/arp:arp_test
- TestLinkAddressRequest
pkg/tcpip/network/ipv6:ipv6_test
- TestLinkAddressRequest
Updates #1889
Updates #1894
Updates #1895
Updates #1947
Updates #1948
Updates #1949
Updates #1950
PiperOrigin-RevId: 323451569
|
|
|
|
TCP now tracks the overhead of the segment structure itself in it's out-of-order
queue (pending). This is required to ensure that a malicious sender sending 1
byte out-of-order segments cannot queue like 1000's of segments which bloat up
memory usage.
We also reduce the default receive window to 32KB. With TCP moderation there is
no need to keep this window at 1MB which means that for new connections the
default out-of-order queue will be small unless the application actually reads
the data that is being sent. This prevents a sender from just maliciously
filling up pending buf with lots of tiny out-of-order segments.
PiperOrigin-RevId: 323450913
|
|
|
|
Changes the API of tcpip.Clock to also provide a method for scheduling and
rescheduling work after a specified duration. This change also implements the
AfterFunc method for existing implementations of tcpip.Clock.
This is the groundwork required to mock time within tests. All references to
CancellableTimer has been replaced with the tcpip.Job interface, allowing for
custom implementations of scheduling work.
This is a BREAKING CHANGE for clients that implement their own tcpip.Clock or
use tcpip.CancellableTimer. Migration plan:
1. Add AfterFunc(d, f) to tcpip.Clock
2. Replace references of tcpip.CancellableTimer with tcpip.Job
3. Replace calls to tcpip.CancellableTimer#StopLocked with tcpip.Job#Cancel
4. Replace calls to tcpip.CancellableTimer#Reset with tcpip.Job#Schedule
5. Replace calls to tcpip.NewCancellableTimer with tcpip.NewJob.
PiperOrigin-RevId: 322906897
|
|
|
|
PiperOrigin-RevId: 322882426
|
|
|
|
PiperOrigin-RevId: 322853192
|
|
|
|
Fixes #3334
PiperOrigin-RevId: 322846384
|
|
|
|
Previously, ICMP destination unreachable datagrams were ignored by TCP
endpoints. This caused connect to hang when an intermediate router
couldn't find a route to the host.
This manifested as a Kokoro error when Docker IPv6 was enabled. The Ruby
image test would try to install the sinatra gem and hang indefinitely
attempting to use an IPv6 address.
Fixes #3079.
|
|
Fixes a NAT bug that manifested as:
- A SYN was sent from gVisor to another host, unaffected by iptables.
- The corresponding SYN/ACK was NATted by a PREROUTING REDIRECT rule
despite being part of the existing connection.
- The socket that sent the SYN never received the SYN/ACK and thus a
connection could not be established.
We handle this (as Linux does) by tracking all connections, inserting a
no-op conntrack rule for new connections with no rules of their own.
Needed for istio support (#170).
|