Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 300362789
|
|
PiperOrigin-RevId: 300308974
|
|
This change also updates where the IP packet buffer is held in an
outbound tcpip.PacketBuffer from Header to Data. This change removes
unncessary copying of the IP packet buffer when forwarding.
Test: stack_test.TestNICForwarding
PiperOrigin-RevId: 300217972
|
|
Fixes #1510
Test:
- stack_test.TestForwardingWithStaticResolver
- stack_test.TestForwardingWithFakeResolver
- stack_test.TestForwardingWithNoResolver
- stack_test.TestForwardingWithFakeResolverPartialTimeout
- stack_test.TestForwardingWithFakeResolverTwoPackets
- stack_test.TestForwardingWithFakeResolverManyPackets
- stack_test.TestForwardingWithFakeResolverManyResolutions
PiperOrigin-RevId: 300182570
|
|
When list elements are removed from a list but not discarded, it becomes
important to invalidate the references they hold to their former
neighbors to prevent memory leaks.
PiperOrigin-RevId: 299412421
|
|
From RFC 793 s3.9 p61 Event Processing:
CLOSE Call during TIME-WAIT: return with "error: connection closing"
Fixes #1603
PiperOrigin-RevId: 299401353
|
|
If the NIC has a valid IPv6 address assigned, use it as the
source address for outgoing NDP Router Solicitation packets.
Test: stack_test.TestRouterSolicitation
PiperOrigin-RevId: 299398763
|
|
|
|
Useful for logs to print the string representation of the value
instead of the integer value.
PiperOrigin-RevId: 299356847
|
|
By putting slices into the pool, the slice header escapes. This can be avoided
by not putting the slice header into the pool.
This removes an allocation from the TCP segment send path.
PiperOrigin-RevId: 299215480
|
|
Properly discard segments from the segment heap.
PiperOrigin-RevId: 298704074
|
|
Ensures that all access to TransportEndpointInfo.ID is either:
* In a function ending in a Locked suffix.
* While holding the appropriate mutex.
This primary affects the checkV4Mapped method on affected endpoints, which has
been renamed to checkV4MappedLocked. Also document the method and change its
argument to be a value instead of a pointer which had caused some awkwardness.
This race was possible in the udp and icmp endpoints between Connect and uses
of TransportEndpointInfo.ID including in both itself and Bind.
The tcp endpoint did not suffer from this bug, but benefited from better
documentation.
Updates #357
PiperOrigin-RevId: 298682913
|
|
PiperOrigin-RevId: 298451319
|
|
A deadlock may occur if a write lock on a RWMutex is blocked between
nested read lock attempts as the inner read lock attempt will be
blocked in this scenario.
Example (T1 and T2 are differnt goroutines):
T1: obtain read-lock
T2: attempt write-lock (blocks)
T1: attempt inner/nested read-lock (blocks)
Here we can see that T1 and T2 are deadlocked.
Tests: Existing tests pass.
PiperOrigin-RevId: 298426678
|
|
- Fix review comments.
|
|
Call stack.Close on stacks when we are done with them in tcp_test. This avoids
leaking resources and reduces the test's flakiness when race/gotsan is enabled.
It also provides test coverage for the race also fixed in this change, which
can be reliably triggered with the stack.Close change (and without the other
changes) when race/gotsan is enabled.
The race was possible when calling Abort (via stack.Close) on an endpoint
processing a SYN segment as part of a passive connect.
Updates #1564
PiperOrigin-RevId: 297685432
|
|
PiperOrigin-RevId: 297638665
|
|
|
|
|
|
Tests:
- header_test.TestIsV6LinkLocalMulticastAddress
- header_test.TestScopeForIPv6Address
- stack_test.TestIPv6SourceAddressSelectionScopeAndSameAddress
PiperOrigin-RevId: 297215576
|
|
- commit the changes for the comments.
|
|
TestCurrentConnectedIncrement fails consistently under gotsan due to the sleep
to check metrics is exactly the same as the TIME-WAIT duration. Under gotsan
things can be slow enough that the increment test is done before the protocol
goroutine is run after the TIME-WAIT timer expires and does its cleanup.
Increasing the sleep from 1s to 1.2s makes the test pass consistently.
PiperOrigin-RevId: 297160181
|
|
Protocol dispatchers were previously leaked. Bypassing TIME_WAIT is required to
test this change.
Also fix a race when a socket in SYN-RCVD is closed. This is also required to
test this change.
PiperOrigin-RevId: 296922548
|
|
PiperOrigin-RevId: 296526279
|
|
Tests: stack_test.TestAttachToLinkEndpointImmediately
PiperOrigin-RevId: 296474068
|
|
Test: stack_test.TestRouterSolicitation
PiperOrigin-RevId: 296454766
|
|
TCP/IP will work with netstack networking. hostinet doesn't work, and sockets
will have the same behavior as it is now.
Before the userspace is able to create device, the default loopback device can
be used to test.
/proc/net and /sys/net will still be connected to the root network stack; this
is the same behavior now.
Issue #1833
PiperOrigin-RevId: 296309389
|
|
- Disabled NICs will have their associated NDP state cleared.
- Disabled NICs will not accept incoming packets.
- Writes through a Route with a disabled NIC will return an invalid
endpoint state error.
- stack.Stack.FindRoute will not return a route with a disabled NIC.
- NIC's Running flag will report the NIC's enabled status.
Tests:
- stack_test.TestDisableUnknownNIC
- stack_test.TestDisabledNICsNICInfoAndCheckNIC
- stack_test.TestRoutesWithDisabledNIC
- stack_test.TestRouteWritePacketWithDisabledNIC
- stack_test.TestStopStartSolicitingRouters
- stack_test.TestCleanupNDPState
- stack_test.TestAddRemoveIPv4BroadcastAddressOnNICEnableDisable
- stack_test.TestJoinLeaveAllNodesMulticastOnNICEnableDisable
PiperOrigin-RevId: 296298588
|
|
|
|
Added the ability to get/set the IP_RECVTCLASS socket option on UDP endpoints.
If enabled, traffic class from the incoming Network Header passed as ancillary
data in the ControlMessages.
Adding Get/SetSockOptBool to decrease the overhead of getting/setting simple
options. (This was absorbed in a CL that will be landing before this one).
Test:
* Added unit test to udp_test.go that tests getting/setting as well as
verifying that we receive expected TOS from incoming packet.
* Added a syscall test for verifying getting/setting
* Removed test skip for existing syscall test to enable end to end test.
PiperOrigin-RevId: 295840218
|
|
Add nat table support for Prerouting hook with Redirect option.
Add tests to check redirect of ports.
|
|
$ iptables -N foochain
$ iptables -A INPUT -j foochain
|
|
PiperOrigin-RevId: 294957297
|
|
PiperOrigin-RevId: 294952610
|
|
- Adds creation of user chains via `-N <chainname>`
- Adds `-j RETURN` support for built-in chains, which triggers the
chain's underflow rule (usually the default policy).
- Adds tests for chain creation, default policies, and `-j RETURN' from
built-in chains.
|
|
PiperOrigin-RevId: 294500858
|
|
PiperOrigin-RevId: 294340468
|
|
Previously, a DAD event would not be sent if DAD was disabled.
This allows integrators to do some work when an IPv6 address is bound to
a NIC without special logic that checks if DAD is enabled.
Without this change, integrators would need to check if a NIC has DAD
enabled when an address is auto-generated. If DAD is enabled, it would
need to delay the work until the DAD completion event; otherwise, it
would need to do the work in the address auto-generated event handler.
Test: stack_test.TestDADDisabled
PiperOrigin-RevId: 293732914
|
|
|
|
Auto-generated link-local addresses should have the same lifecycle hooks
as global SLAAC addresses.
The Stack's NDP dispatcher should be notified when link-local addresses
are auto-generated and invalidated. They should also be removed when a
NIC is disabled (which will be supported in a later change).
Tests:
- stack_test.TestNICAutoGenAddrWithOpaque
- stack_test.TestNICAutoGenAddr
PiperOrigin-RevId: 293706760
|
|
Addresses may be added before a NIC is enabled. Make sure DAD is
performed on the permanent IPv6 addresses when they get enabled.
Test:
- stack_test.TestDoDADWhenNICEnabled
- stack.TestDisabledRxStatsWhenNICDisabled
PiperOrigin-RevId: 293697429
|
|
The types gonet.Conn and gonet.PacketConn were confusingly named as both
implemented net.Conn. Further, gonet.Conn was perhaps unexpectedly
TCP-specific (net.Conn is not). This change renames them to gonet.TCPConn and
gonet.UDPConn.
Renames gonet.NewListener to gonet.ListenTCP and adds a new gonet.NewTCPListner
function to be consistent with both the gonet.DialXxx and gonet.NewXxxConn
functions as well as net.ListenTCP.
Updates #1632
PiperOrigin-RevId: 293671303
|
|
Get the link address for the target of an NDP Neighbor Advertisement
from the NDP Target Link Layer Address option.
Tests:
- ipv6.TestNeighorAdvertisementWithTargetLinkLayerOption
- ipv6.TestNeighorAdvertisementWithInvalidTargetLinkLayerOption
PiperOrigin-RevId: 293632609
|
|
These were out-of-band notes that can help provide additional context
and simplify automated imports.
PiperOrigin-RevId: 293525915
|
|
From RFC 793 s3.9 p58 Event Processing:
If RECEIVE Call arrives in CLOSED state and the user has access to such a
connection, the return should be "error: connection does not exist"
Fixes #1598
PiperOrigin-RevId: 293494287
|
|
|
|
PiperOrigin-RevId: 293271055
|
|
PiperOrigin-RevId: 293243342
|
|
Tests 65k connection attempts on common types of sockets to check for port
leaks.
Also fixes a bug where dual-stack sockets wouldn't properly re-queue
segments received while closing.
PiperOrigin-RevId: 293241166
|
|
PiperOrigin-RevId: 292624867
|