Age | Commit message (Collapse) | Author |
|
As per RFC 1122 and Linux retransmit timeout handling:
- The segment retransmit timeout needs to exponentially increase and
cap at a predefined value.
- TCP connection needs to timeout after a predefined number of
segment retransmissions.
- TCP connection should not timeout when the retranmission timeout
exceeds MaxRTO, predefined upper bound.
Fixes #2673
PiperOrigin-RevId: 311463961
|
|
This change adds support for TCP_SYNCNT and TCP_WINDOW_CLAMP options
in GetSockOpt/SetSockOpt. This change does not really change any
behaviour in Netstack and only stores/returns the stored value.
Actual honoring of these options will be added as required.
Fixes #2626, #2625
PiperOrigin-RevId: 311453777
|
|
PiperOrigin-RevId: 310963404
|
|
view.ToVectorisedView() now just returns an empty vectorised
view if the view is of zero length. Earlier it would return
a VectorisedView of zero length but with 1 empty view. This
has been a source of bugs as lower layers don't expect
zero length views in VectorisedViews.
VectorisedView.AppendView() now is a no-op if the view being
appended is of zero length.
Fixes #2658
PiperOrigin-RevId: 310942269
|
|
Enables commands with -o (--out-interface) for iptables rules.
$ iptables -A OUTPUT -o eth0 -j ACCEPT
PiperOrigin-RevId: 310642286
|
|
This fixed the corresponding packetimpact test.
PiperOrigin-RevId: 310593470
|
|
Only the last test was running before since the goroutines won't be executed
until after this loop. I added t.Log(test.name) and this is was the result:
TestListenNoAcceptNonUnicastV4/SourceUnspecified: DestOtherMulticast
TestListenNoAcceptNonUnicastV4/DestUnspecified: DestOtherMulticast
TestListenNoAcceptNonUnicastV4/DestOtherMulticast: DestOtherMulticast
TestListenNoAcceptNonUnicastV4/SourceBroadcast: DestOtherMulticast
TestListenNoAcceptNonUnicastV4/DestOurMulticast: DestOtherMulticast
TestListenNoAcceptNonUnicastV4/DestBroadcast: DestOtherMulticast
TestListenNoAcceptNonUnicastV4/SourceOtherMulticast: DestOtherMulticast
TestListenNoAcceptNonUnicastV4/SourceOurMulticast: DestOtherMulticast
https://github.com/golang/go/wiki/TableDrivenTests#parallel-testing
PiperOrigin-RevId: 310440629
|
|
PiperOrigin-RevId: 310417191
|
|
Every call to sender.NextSeg does not need to iterate from the
front of the writeList as in a given recovery episode we can cache
the last nextSeg returned. There cannot be a lower sequenced segment
that matches the next call to NextSeg as otherwise we would have
returned that instead in the previous call.
This fixes the issue of excessive CPU usage w/ large send buffers
where we spend a lot of time iterating from the front of the list on
every NextSeg invocation.
Further the following other bugs were also fixed:
* Iteration of segments never sent in NextSeg() when looking for segments for
retransmission that match step1/3/4 of the NextSeg algorithm
* Correctly setting rescueRxt only if the rescue segment was actually sent.
* Correctly initializing rescueRxt/highRxt when entering SACK recovery.
* Correctly re-arming the timer only on retransmissions when SACK is in use
and not for every segment being sent as it was being done before.
* Copy over xmitTime and xmitCount on segment clone.
* Move writeNext along when skipping over SACKED segments. This is required
to prevent spurious retransmissions where we end up retransmitting data
that was never lost.
PiperOrigin-RevId: 310387671
|
|
PiperOrigin-RevId: 310380911
|
|
Based on ipv6's TestReceiveIPv6Fragments.
|
|
Do not assume that networks need any DHCPv6 configurations. Instead,
notify the NDP dispatcher in response to the first NDP RA's DHCPv6
flags, even if the flags indicate no DHCPv6 configurations are
available.
PiperOrigin-RevId: 310245068
|
|
We need to check vv.Size() instead of len(tcp), as tcp will always be 20 bytes
long.
PiperOrigin-RevId: 310218351
|
|
As per RFC 1122 4.2.2.17, when the remote advertizes zero receive window,
the sender needs to probe for the window-size to become non-zero starting
from the next retransmission interval. The TCP connection needs to be kept
open as long as the remote is acknowledging the zero window probes.
We reuse the retransmission timers to support this.
Fixes #1644
PiperOrigin-RevId: 310021575
|
|
Connection tracking is used to track packets in prerouting and
output hooks of iptables. The NAT rules modify the tuples in
connections. The connection tracking code modifies the packets by
looking at the modified tuples.
|
|
If the NIC already has a generated SLAAC address, regenerate a new SLAAC
address until one is generated that does not conflict with the NIC's
existing addresses, up to a maximum of 10 attempts.
This applies to both stable and temporary SLAAC addresses.
Test: stack_test.TestMixedSLAACAddrConflictRegen
PiperOrigin-RevId: 309495628
|
|
PiperOrigin-RevId: 309491861
|
|
Updates #231
PiperOrigin-RevId: 309339316
|
|
Updates #231
PiperOrigin-RevId: 309323808
|
|
Implement rule 7 of Source Address Selection RFC 6724 section 5. This
makes temporary (short-lived) addresses preferred over non-temporary
addresses when earlier rules are equal.
Test: stack_test.TestIPv6SourceAddressSelectionScopeAndSameAddress
PiperOrigin-RevId: 309250975
|
|
PiperOrigin-RevId: 308940886
|
|
Support generating temporary (short-lived) IPv6 SLAAC addresses to
address privacy concerns outlined in RFC 4941.
Tests:
- stack_test.TestAutoGenTempAddr
- stack_test.TestNoAutoGenTempAddrForLinkLocal
- stack_test.TestAutoGenTempAddrRegen
- stack_test.TestAutoGenTempAddrRegenTimerUpdates
- stack_test.TestNoAutoGenTempAddrWithoutStableAddr
- stack_test.TestAutoGenAddrInResponseToDADConflicts
PiperOrigin-RevId: 308915566
|
|
Poll for metric updates as immediately trying to read them can sometimes be
flaky if due to goroutine scheduling the check happens before the sender has got
a chance to update the corresponding sent metric.
PiperOrigin-RevId: 308712817
|
|
PiperOrigin-RevId: 308674219
|
|
Tested:
When run on Linux, a correct ICMPv6 response is received. On netstack, no
ICMPv6 response is received.
PiperOrigin-RevId: 308343113
|
|
A CancellableTimer's AfterFunc timer instance creates a closure over the
CancellableTimer's address. This closure makes a CancellableTimer unsafe
to copy.
No behaviour change, existing tests pass.
PiperOrigin-RevId: 308306664
|
|
These methods let users eaily break the VectorisedView abstraction, and
allowed netstack to slip into pseudo-enforcement of the "all headers are
in the first View" invariant. Removing them and replacing with PullUp(n)
breaks this reliance and will make it easier to add iptables support and
rework network buffer management.
The new View.PullUp(n) method is low cost in the common case, when when
all the headers fit in the first View.
PiperOrigin-RevId: 308163542
|
|
This change adds a layer of abstraction around the internal Docker APIs,
and eliminates all direct dependencies on Dockerfiles in the infrastructure.
A subsequent change will automated the generation of local images (with
efficient caching). Note that this change drops the use of bazel container
rules, as that experiment does not seem to be viable.
PiperOrigin-RevId: 308095430
|
|
Right now, sentry panics in this case:
panic: close of nil channel
goroutine 67 [running]:
pkg/tcpip/transport/tcp/tcp.(*endpoint).listen(0xc0000ce000, 0x9, 0x0)
pkg/tcpip/transport/tcp/endpoint.go:2208 +0x170
pkg/tcpip/transport/tcp/tcp.(*endpoint).Listen(0xc0000ce000, 0x9, 0xc0003a1ad0)
pkg/tcpip/transport/tcp/endpoint.go:2179 +0x50
Fixes #2468
PiperOrigin-RevId: 307896725
|
|
PiperOrigin-RevId: 307598974
|
|
Capture a timer's locker for each instance of a CancellableTimer so that
reassigning a tcpip.CancellableTimer does not cause a data race.
Reassigning a tcpip.CancellableTimer updates its underlying locker. When
a timer fires, it does a read of the timer's locker variable to lock it.
This read of the locker was not synchronized so a race existed where one
goroutine may reassign the timer (updating the locker) and another
handles the timer firing (attempts to lock the timer's locker).
Test: tcpip_test.TestCancellableTimerReassignment
PiperOrigin-RevId: 307499822
|
|
PiperOrigin-RevId: 307477185
|
|
Fixed to match RFC 793 page 69.
Fixes #1607
PiperOrigin-RevId: 307334892
|
|
Inform the netstack integrator when the netstack receives an NDP Router
Advertisement message with the NDP DNS Search List option with at least
one domain name. The stack will not maintain any state related to the
search list - the integrator is expected to maintain any required state
and invalidate domain names after their lifetime expires, or refresh the
lifetime when a new one is received for a known domain name.
Test:
- header_test.TestNDPDNSSearchListOption
- header_test.TestNDPDNSSearchListOptionSerialize
- header_test.TestNDPSearchListOptionDomainNameLabelInvalidSymbols
- header_test.TestNDPOptionsIterCheck
- stack_test.TestNDPDNSSearchListDispatch
PiperOrigin-RevId: 307109375
|
|
These methods let users eaily break the VectorisedView abstraction, and
allowed netstack to slip into pseudo-enforcement of the "all headers are
in the first View" invariant. Removing them and replacing with PullUp(n)
breaks this reliance and will make it easier to add iptables support and
rework network buffer management.
The new View.PullUp(n) method is low cost in the common case, when when
all the headers fit in the first View.
|
|
PiperOrigin-RevId: 307053624
|
|
This previously changed in 305699233, but this behaviour turned out to
be load bearing.
PiperOrigin-RevId: 307033802
|
|
Better validate NDP NAs options before updating the link address cache.
Test: stack_test.TestNeighorAdvertisementWithTargetLinkLayerOption
PiperOrigin-RevId: 306962924
|
|
PiperOrigin-RevId: 306959393
|
|
When the listening socket is read shutdown, we need to reset all pending
and incoming connections. Ensure that the endpoint is not cleaned up
from the demuxer and subsequent bind to same port does not go through.
PiperOrigin-RevId: 306958038
|
|
Test: header_test.TestNDPOptionsIterCheck
PiperOrigin-RevId: 306953867
|
|
This change makes SynRcvdCountThreshold and the global synRcvdCount into a stack
configurable value. This is required because in cases like mod_proxy which
create multiple Stack instances the count will be a global value that impacts
all Stack instances.
Further the tests relied on modifying the global threshold to simulate tests
where we want to verify SYN cookie based behaviour. This lead to data races due
to the global being modified/read without locks or atomics.
PiperOrigin-RevId: 306947723
|
|
PiperOrigin-RevId: 306677789
|
|
Remove useless casts and duplicate return statements.
PiperOrigin-RevId: 306627916
|
|
Attempt to redeliver TCP segments that are enqueued into a closing
TCP endpoint. This was being done for Established endpoints but not
for those that are listening or performing connection handshake.
Fixes #2417
PiperOrigin-RevId: 306598155
|
|
Tests now use a MinRTO of 3s instead of default 200ms. This reduced flakiness in
a lot of the congestion control/recovery tests which were flaky due to
retransmit timer firing too early in case the test executors were overloaded.
This change also bumps some of the timeouts in tests which were too sensitive to
timer variations and reduces the number of slow start iterations which can
make the tests run for too long and also trigger retansmit timeouts etc if
the executor is overloaded.
PiperOrigin-RevId: 306562645
|
|
As per RFC 7217 section 6, attempt to regenerate IPv6 SLAAC address in response
to a DAD conflict if the address was generated with an opaque IID as outlined in
RFC 7217 section 5.
Test:
- stack_test.TestAutoGenAddrWithOpaqueIIDDADRetries
- stack_test.TestAutoGenAddrWithEUI64IIDNoDADRetries
- stack_test.TestAutoGenAddrContinuesLifetimesAfterRetry
PiperOrigin-RevId: 306555645
|
|
PiperOrigin-RevId: 305807868
|
|
Better validate NDP NS messages and their options before doing work in
response to them. Also make sure that NA messages sent in response to
an NS use the correct IPv6 and link-layer addresses so they are
routed properly and received by the right node.
Test: stack_test.TestNeighorSolicitationResponse
PiperOrigin-RevId: 305799054
|
|
PiperOrigin-RevId: 305699233
|