summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip
AgeCommit message (Collapse)Author
2020-11-13Merge release-20201030.0-89-g7fff51e50 (automated)gVisor bot
2020-11-13Refactor loss recovery in TCP.Nayana Bidari
The current implementation of loss recovery algorithms SACK and NewReno are in the same file(snd.go). The functions have multiple checks to see which one is currently used by the endpoint. This CL will refactor and separate the implementation of existing recovery algorithms which will help us to implement new recovery algorithms(such as RACK) with less changes to the existing code. There is no change in the behavior. PiperOrigin-RevId: 342312166
2020-11-13Merge release-20201030.0-83-g5bb64ce1b (automated)gVisor bot
2020-11-12Refactor SOL_SOCKET optionsNayana Bidari
Store all the socket level options in a struct and call {Get/Set}SockOpt on this struct. This will avoid implementing socket level options on all endpoints. This CL contains implementing one socket level option for tcp and udp endpoints. PiperOrigin-RevId: 342203981
2020-11-13Merge release-20201030.0-80-g638d64c63 (automated)gVisor bot
2020-11-12Change AllocationSize to SizeWithPadding as requestedJulian Elischer
RELNOTES: n/a PiperOrigin-RevId: 342176296
2020-11-13Merge release-20201030.0-77-gd700ba22a (automated)gVisor bot
2020-11-12Pad with a loop rather than a copy from an allocation.Julian Elischer
Add a unit test for ipv4.Encode and a round trip test. PiperOrigin-RevId: 342169517
2020-11-13Merge release-20201030.0-74-g1a972411b (automated)gVisor bot
2020-11-12Move packet handling to NetworkEndpointGhanan Gowripalan
The NIC should not hold network-layer state or logic - network packet handling/forwarding should be performed at the network layer instead of the NIC. Fixes #4688 PiperOrigin-RevId: 342166985
2020-11-11Merge release-20201030.0-68-g9c4102896 (automated)gVisor bot
2020-11-11Teach netstack how to add options to IPv4 packetsJulian Elischer
Most packets don't have options but they are an integral part of the standard. Teaching the ipv4 code how to handle them will simplify future testing and use. Because Options are so rare it is worth making sure that the extra work is kept out of the fast path as much as possible. Prior to this change, all usages of the IHL field of the IPv4Fields/Encode system set it to the same constant value except in a couple of tests for bad values. From this change IHL will not be a constant as it will depend on the size of any Options. Since ipv4.Encode() now handles the options it becomes a possible source of errors to let the callers set this value, so remove it entirely and calculate the value from the size of the Options if present (or not) therefore guaranteeing a correct value. Fixes #4709 RELNOTES: n/a PiperOrigin-RevId: 341864765
2020-11-09Merge release-20201030.0-60-g199fcd0fe (automated)gVisor bot
2020-11-09Skip `EventHUp` notify in `FIN_WAIT2` on a socket close.Mithun Iyer
This Notify was added as part of cl/279106406; but notifying `EventHUp` in `FIN_WAIT2` is incorrect, as we want to only notify later on `TIME_WAIT` or a reset. However, we do need to notify any blocked waiters of an activity on the endpoint with `EventIn`|`EventOut`. PiperOrigin-RevId: 341490913
2020-11-09Merge release-20201030.0-59-g2fcca60a7 (automated)gVisor bot
2020-11-09net: connect to the ipv4 localhost returns ENETUNREACH if the address isn't setAndrei Vagin
cl/340002915 modified the code to return EADDRNOTAVAIL if connect is called for a localhost address which isn't set. But actually, Linux returns EADDRNOTAVAIL for ipv6 addresses and ENETUNREACH for ipv4 addresses. Updates #4735 PiperOrigin-RevId: 341479129
2020-11-09Merge release-20201030.0-53-g0fb5353e4 (automated)gVisor bot
2020-11-09Initialize references with a value of 1.Dean Deng
This lets us avoid treating a value of 0 as one reference. All references using the refsvfs2 template must call InitRefs() before the reference is incremented/decremented, or else a panic will occur. Therefore, it should be pretty easy to identify missing InitRef calls during testing. Updates #1486. PiperOrigin-RevId: 341411151
2020-11-07Merge release-20201030.0-46-g5288e1941 (automated)gVisor bot
2020-11-06Trim link headers from buffer clone when sniffingGhanan Gowripalan
PiperOrigin-RevId: 341135083
2020-11-06Merge release-20201030.0-44-g9e82747d6 (automated)gVisor bot
2020-11-06Return early in walkSACK if segment has no SACK blocks.Bhasker Hariharan
This avoids a needless allocation. Updates #231 PiperOrigin-RevId: 341113160
2020-11-06Merge release-20201030.0-40-g955e09dfb (automated)gVisor bot
2020-11-06Do not send to the zero portGhanan Gowripalan
Port 0 is not meant to identify any remote port so attempting to send a packet to it should return an error. PiperOrigin-RevId: 341009528
2020-11-06Merge release-20201030.0-38-g06e33cd73 (automated)gVisor bot
2020-11-05Cache addressEndpoint.addr.Subnet() to avoid allocations.Bhasker Hariharan
This change adds a Subnet() method to AddressableEndpoint so that we can avoid repeated calls to AddressableEndpoint.AddressWithPrefix().Subnet(). Updates #231 PiperOrigin-RevId: 340969877
2020-11-06Merge release-20201030.0-34-g8c0701462 (automated)gVisor bot
2020-11-05Use stack.Route exclusively for writing packetsGhanan Gowripalan
* Remove stack.Route from incoming packet path. There is no need to pass around a stack.Route during the incoming path of a packet. Instead, pass around the packet's link/network layer information in the packet buffer since all layers may need this information. * Support address bound and outgoing packet NIC in routes. When forwarding is enabled, the source address of a packet may be bound to a different interface than the outgoing interface. This change updates stack.Route to hold both NICs so that one can be used to write packets while the other is used to check if the route's bound address is valid. Note, we need to hold the address's interface so we can check if the address is a spoofed address. * Introduce the concept of a local route. Local routes are routes where the packet never needs to leave the stack; the destination is stack-local. We can now route between interfaces within a stack if the packet never needs to leave the stack, even when forwarding is disabled. * Always obtain a route from the stack before sending a packet. If a packet needs to be sent in response to an incoming packet, a route must be obtained from the stack to ensure the stack is configured to send packets to the packet's source from the packet's destination. * Enable spoofing if a stack may send packets from unowned addresses. This change required changes to some netgophers since previously, promiscuous mode was enough to let the netstack respond to all incoming packets regardless of the packet's destination address. Now that a stack.Route is not held for each incoming packet, finding a route may fail with local addresses we don't own but accepted packets for while in promiscuous mode. Since we also want to be able to send from any address (in response the received promiscuous mode packets), we need to enable spoofing. * Skip transport layer checksum checks for locally generated packets. If a packet is locally generated, the stack can safely assume that no errors were introduced while being locally routed since the packet is never sent out the wire. Some bugs fixed: - transport layer checksum was never calculated after NAT. - handleLocal didn't handle routing across interfaces. - stack didn't support forwarding across interfaces. - always consult the routing table before creating an endpoint. Updates #4688 Fixes #3906 PiperOrigin-RevId: 340943442
2020-11-05Merge release-20201030.0-29-g771e9ce8e (automated)gVisor bot
2020-11-04Unlock tcp endpoint mutex before blocking forever.Dean Deng
This was occasionally causing tests to get stuck due to races with the save process, during which the same mutex is acquired. PiperOrigin-RevId: 340789616
2020-11-03Merge release-20201027.0-58-g66d24bb69 (automated)gVisor bot
2020-11-03Release mutex before blocking during TCP handshake route resolution.Dean Deng
Without releasing the mutex, operations on the endpoint following a nonblocking connect will not make progress until connect is complete. PiperOrigin-RevId: 340467654
2020-11-03Merge release-20201027.0-54-gc22067d3d (automated)gVisor bot
2020-11-02Send NUD probes in a separate gorountineSam Balana
Send NUD probes in another gorountine to free the thread of execution for finishing the state transition. This is necessary to avoid deadlock where sending and processing probes are done in the same call stack, such as loopback and integration tests. Fixes #4701 PiperOrigin-RevId: 340362481
2020-11-02Merge release-20201027.0-50-g2eb3ee586 (automated)gVisor bot
2020-11-02Automated rollback of changelist 339945377Dean Deng
PiperOrigin-RevId: 340274194
2020-10-31Merge release-20201019.0-115-gdf88f223b (automated)gVisor bot
2020-10-31net/tcpip: connect to unset loopback address has to return EADDRNOTAVAILAndrei Vagin
In the docker container, the ipv6 loopback address is not set, and connect("::1") has to return ENEADDRNOTAVAIL in this case. Without this fix, it returns EHOSTUNREACH. PiperOrigin-RevId: 340002915
2020-10-30Merge release-20201019.0-112-gba05c6845 (automated)gVisor bot
2020-10-30Automated rollback of changelist 339750876Dean Deng
PiperOrigin-RevId: 339945377
2020-10-29Merge release-20201019.0-104-ga86f988a8 (automated)gVisor bot
2020-10-29Automated rollback of changelist 339675182Dean Deng
PiperOrigin-RevId: 339750876
2020-10-29Merge release-20201019.0-103-g181fea0b5 (automated)gVisor bot
2020-10-29Make RedirectTarget thread safeKevin Krakauer
Fixes #4613. PiperOrigin-RevId: 339746784
2020-10-29Merge release-20201019.0-102-gb9f18fe2f (automated)gVisor bot
2020-10-29Fix TCP wildcard bind failure when netstack is v6 onlyTing-Yu Wang
TCP endpoint unconditionly binds to v4 even when the stack only supports v6. PiperOrigin-RevId: 339739392
2020-10-29Merge release-20201019.0-101-g02fe467b4 (automated)gVisor bot
2020-10-29Keep magic constants out of netstackKevin Krakauer
PiperOrigin-RevId: 339721152
2020-10-29Merge release-20201019.0-99-g1f0f687cb (automated)gVisor bot
2020-10-29Delay goroutine creation during TCP handshake for accept/connect.Dean Deng
Refactor TCP handshake code so that when connect is initiated, the initial SYN is sent before creating a goroutine to handle the rest of the handshake (which blocks). Similarly, the initial SYN-ACK is sent inline when SYN is received during accept. Some additional cleanup is done as well. Eventually we would like to complete connections in the dispatcher without requiring a wakeup to complete the handshake. This refactor makes that easier. Updates #231 PiperOrigin-RevId: 339675182