Age | Commit message (Collapse) | Author |
|
This allows an fdbased endpoint to have multiple underlying fd's from which
packets can be read and dispatched/written to.
This should allow for higher throughput as well as better scalability of the
network stack as number of connections increases.
Updates #231
PiperOrigin-RevId: 251852825
|
|
PiperOrigin-RevId: 251788534
|
|
In case of GSO, a segment can container more than one packet
and we need to use the pCount() helper to get a number of packets.
PiperOrigin-RevId: 251743020
|
|
Multicast packets are special in that their destination address does not
identify a specific interface. When sending out such a packet the multicast
address is the remote address, but for incoming packets it is the local
address. Hence, when looping a multicast packet, the route needs to be
tweaked to reflect this.
PiperOrigin-RevId: 251739298
|
|
When checking the length of the acceptedChan we should hold the
endpoint mutex otherwise a syn received while the listening socket
is being closed can result in a data race where the cleanupLocked
routine sets acceptedChan to nil while a handshake goroutine
in progress could try and check it at the same time.
PiperOrigin-RevId: 251537697
|
|
Updates #236
PiperOrigin-RevId: 251337915
|
|
PiperOrigin-RevId: 250976665
|
|
Netstack sets the unprocessed segment queue size to match the receive
buffer size. This is not required as this queue only needs to hold enough
for a short duration before the endpoint goroutine can process it.
Updates #230
PiperOrigin-RevId: 250976323
|
|
Funcion signatures are not validated during compilation. Since
they are not exported, they can change at any time. The guard
ensures that they are verified at least on every version upgrade.
PiperOrigin-RevId: 250733742
|
|
Netstack listen loop can get stuck if cookies are in-use and the app is slow to
accept incoming connections. Further we continue to complete handshake for a
connection even if the backlog is full. This creates a problem when a lots of
connections come in rapidly and we end up with lots of completed connections
just hanging around to be delivered.
These fixes change netstack behaviour to mirror what linux does as described
here in the following article
http://veithen.io/2014/01/01/how-tcp-backlog-works-in-linux.html
Now when cookies are not in-use Netstack will silently drop the ACK to a SYN-ACK
and not complete the handshake if the backlog is full. This will result in the
connection staying in a half-complete state. Eventually the sender will
retransmit the ACK and if backlog has space we will transition to a connected
state and deliver the endpoint.
Similarly when cookies are in use we do not try and create an endpoint unless
there is space in the accept queue to accept the newly created endpoint. If
there is no space then we again silently drop the ACK as we can just recreate it
when the ACK is retransmitted by the peer.
We also now use the backlog to cap the size of the SYN-RCVD queue for a given
endpoint. So at any time there can be N connections in the backlog and N in a
SYN-RCVD state if the application is not accepting connections. Any new SYNs
will be dropped.
This CL also fixes another small bug where we mark a new endpoint which has not
completed handshake as connected. We should wait till handshake successfully
completes before marking it connected.
Updates #236
PiperOrigin-RevId: 250717817
|
|
These wakers are uselessly allocated and passed around; nothing ever
listens for notifications on them. The code here appears to be
vestigial, so removing it and allowing a nil waker to be passed seems
appropriate.
PiperOrigin-RevId: 249879320
Change-Id: Icd209fb77cc0dd4e5c49d7a9f2adc32bf88b4b71
|
|
PiperOrigin-RevId: 249511348
Change-Id: I34539092cc85032d9473ff4dd308fc29dc9bfd6b
|
|
This is in preparation to support an fdbased endpoint that can read/dispatch
packets from multiple underlying fds.
Updates #231
PiperOrigin-RevId: 249337074
Change-Id: Id7d375186cffcf55ae5e38986e7d605a96916d35
|
|
And stop storing the Filesystem in the MountSource.
This allows us to decouple the MountSource filesystem type from the name of the
filesystem.
PiperOrigin-RevId: 247292982
Change-Id: I49cbcce3c17883b7aa918ba76203dfd6d1b03cc8
|
|
Testing:
Unit tests added
PiperOrigin-RevId: 247096269
Change-Id: I849c010eadcb53caf45896a15ef38162d66a9568
|
|
Allows cancellation and timeouts.
PiperOrigin-RevId: 247090428
Change-Id: I91907f12e218677dcd0e0b6d72819deedbd9f20c
|
|
Some behavior was broken due to the difficulty of running automated raw
socket tests.
Change-Id: I152ca53916bb24a0208f2dc1c4f5bc87f4724ff6
PiperOrigin-RevId: 246747067
|
|
The tcpip.Clock comment stated that times provided by it should not be used for
netstack internal timekeeping. This comment was from before the interface
supported monotonic times. The monotonic times that it provides are now be the
preferred time source for netstack internal timekeeping.
PiperOrigin-RevId: 246618772
Change-Id: I853b720e3d719b03fabd6156d2431da05d354bda
|
|
Testing:
Unit tests and also large ping in Fuchsia OS
PiperOrigin-RevId: 246563592
Change-Id: Ia12ab619f64f4be2c8d346ce81341a91724aef95
|
|
- include packet_list.go
- exclude state.go (by renaming to include an underscore)
Also rename raw.go to endpoint.go for consistency.
PiperOrigin-RevId: 246547912
Change-Id: I19c8331c794ba683a940cc96a8be6497b53ff24d
|
|
PiperOrigin-RevId: 246536003
Change-Id: I118b745f45040be9c70cb6a1028acdb06c78d8c9
|
|
Fixed a small logic error that broke proper accounting of MultiPortEndpoints.
PiperOrigin-RevId: 246502126
Change-Id: I1a7d6ea134f811612e545676212899a3707bc2c2
|
|
This requires two changes:
1) Support for more than one socket to join a given multicast group.
2) Duplicate delivery of incoming multicast packets to all sockets listening
for it.
In addition, I tweaked the code (and added a test) to disallow duplicates
IP_ADD_MEMBERSHIP calls for the same group and NIC. This is how Linux does
it.
PiperOrigin-RevId: 246437315
Change-Id: Icad8300b4a8c3f501d9b4cd283bd3beabef88b72
|
|
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes #209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
|
|
PiperOrigin-RevId: 245818639
Change-Id: I03703ef0fb9b6675955637b9fe2776204c545789
|
|
Add the CloseRead & CloseWrite methods that performs shutdown on the
corresponding Read & Write sides of a connection.
Change-Id: I3996a2abdc7cd68a2becba44dc4bd9f0919d2ce1
PiperOrigin-RevId: 245537950
|
|
PiperOrigin-RevId: 245511019
Change-Id: Ia9562a301b46458988a6a1f0bbd5f07cbfcb0615
|
|
Packet socket receive buffers default to the sysctl value of
net.core.rmem_default and are capped by net.core.rmem_max both
which are usually set to 208KB on most systems.
Since we can't expect every gVisor user to bump these we use
SO_RCVBUFFORCE to exceed the limit. This is possible as runsc runs
with CAP_NET_ADMIN outside the sandbox and can do this before
the FD is passed to the sentry inside the sandbox.
Updates #211
iperf output w/ 4MB buffer.
iperf3 -c 172.17.0.2 -t 100
Connecting to host 172.17.0.2, port 5201
[ 4] local 172.17.0.1 port 40378 connected to 172.17.0.2 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 1.15 GBytes 9.89 Gbits/sec 0 1.02 MBytes
[ 4] 1.00-2.00 sec 1.18 GBytes 10.2 Gbits/sec 0 1.02 MBytes
[ 4] 2.00-3.00 sec 965 MBytes 8.09 Gbits/sec 0 1.02 MBytes
[ 4] 3.00-4.00 sec 942 MBytes 7.90 Gbits/sec 0 1.02 MBytes
[ 4] 4.00-5.00 sec 952 MBytes 7.99 Gbits/sec 0 1.02 MBytes
[ 4] 5.00-6.00 sec 1.14 GBytes 9.81 Gbits/sec 0 1.02 MBytes
[ 4] 6.00-7.00 sec 1.13 GBytes 9.68 Gbits/sec 0 1.02 MBytes
[ 4] 7.00-8.00 sec 930 MBytes 7.80 Gbits/sec 0 1.02 MBytes
[ 4] 8.00-9.00 sec 1.15 GBytes 9.91 Gbits/sec 0 1.02 MBytes
[ 4] 9.00-10.00 sec 938 MBytes 7.87 Gbits/sec 0 1.02 MBytes
[ 4] 10.00-11.00 sec 737 MBytes 6.18 Gbits/sec 0 1.02 MBytes
[ 4] 11.00-12.00 sec 1.16 GBytes 9.93 Gbits/sec 0 1.02 MBytes
[ 4] 12.00-13.00 sec 917 MBytes 7.69 Gbits/sec 0 1.02 MBytes
[ 4] 13.00-14.00 sec 1.19 GBytes 10.2 Gbits/sec 0 1.02 MBytes
[ 4] 14.00-15.00 sec 1.01 GBytes 8.70 Gbits/sec 0 1.02 MBytes
[ 4] 15.00-16.00 sec 1.20 GBytes 10.3 Gbits/sec 0 1.02 MBytes
[ 4] 16.00-17.00 sec 1.14 GBytes 9.80 Gbits/sec 0 1.02 MBytes
^C[ 4] 17.00-17.60 sec 718 MBytes 10.1 Gbits/sec 0 1.02 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-17.60 sec 18.4 GBytes 8.98 Gbits/sec 0 sender
[ 4] 0.00-17.60 sec 0.00 Bytes 0.00 bits/sec receiver
PiperOrigin-RevId: 245470590
Change-Id: I1c08c5ee8345de6ac070513656a4703312dc3c00
|
|
This CL fixes the following bugs:
- Uses atomic to set/read status instead of binary.LittleEndian.PutUint32 etc
which are not atomic.
- Increments ringOffsets for frames that are truncated (i.e status is
tpStatusCopy)
- Does not ignore frames with tpStatusLost bit set as they are valid frames and
only indicate that there some frames were lost before this one and metrics can
be retrieved with a getsockopt call.
- Adds checks to make sure blockSize is a multiple of page size. This is
required as the kernel allocates in pages per block and rejects sizes that are
not page aligned with an EINVAL.
Updates #210
PiperOrigin-RevId: 244959464
Change-Id: I5d61337b7e4c0f8a3063dcfc07791d4c4521ba1f
|
|
Support shutdown on only the read side of an endpoint. Reads performed
after a call to Shutdown with only the ShutdownRead flag will return
ErrClosedForReceive without data.
Break out the shutdown(2) with SHUT_RD syscall test into to two tests.
The first tests that no packets are sent when shutting down the read
side of a socket. The second tests that, after shutting down the read
side of a socket, unread data can still be read, or an EOF if there is
no more data to read.
Change-Id: I9d7c0a06937909cbb466b7591544a4bcaebb11ce
PiperOrigin-RevId: 244459430
|
|
Add a UDP forwarder for intercepting and forwarding UDP sessions.
Change-Id: I2d83c900c1931adfc59a532dd4f6b33a0db406c9
PiperOrigin-RevId: 244293576
|
|
It is possible to create a listening socket which will accept
IPv4 and IPv6 connections. In this case, we set IPv6ProtocolNumber
for all accepted endpoints, even if they handle IPv4 connections.
This means that we can't use endpoint.netProto to set gso.L3HdrLen.
PiperOrigin-RevId: 244227948
Change-Id: I5e1863596cb9f3d216febacdb7dc75651882eef1
|
|
RELNOTES: n/a
PiperOrigin-RevId: 244031742
Change-Id: Id0cdb73194018fb5979e67b58510ead19b5a2b81
|
|
PiperOrigin-RevId: 242704699
Change-Id: I87db368ca343b3b4bf4f969b17d3aa4ce2f8bd4f
|
|
Having raw socket code together will make it easier to add support for other raw
network protocols. Currently, only ICMP uses the raw endpoint. However, adding
support for other protocols such as UDP shouldn't be much more difficult than
adding a few switch cases.
PiperOrigin-RevId: 241564875
Change-Id: I77e03adafe4ce0fd29ba2d5dfdc547d2ae8f25bf
|
|
PiperOrigin-RevId: 241025361
Change-Id: I292e7aea9a4b294b11e4f736e107010d9524586b
|
|
The panic was caused by modifying the tree while iterating which invalidated the
iterator.
Also fixes another bug in SACKScoreboard.Insert() which was causing blocks to be
merged incorrectly.
PiperOrigin-RevId: 240895053
Change-Id: Ia72b8244297962df5c04283346da5226434740af
|
|
PiperOrigin-RevId: 240848882
Change-Id: I23dd4599f073263437aeab357c3f767e1a432b82
|
|
The linux packet socket can handle GSO packets, so we can segment packets to
64K instead of the MTU which is usually 1500.
Here are numbers for the nginx-1m test:
runsc: 579330.01 [Kbytes/sec] received
runsc-gso: 1794121.66 [Kbytes/sec] received
runc: 2122139.06 [Kbytes/sec] received
and for tcp_benchmark:
$ tcp_benchmark --duration 15 --ideal
[ 4] 0.0-15.0 sec 86647 MBytes 48456 Mbits/sec
$ tcp_benchmark --client --duration 15 --ideal
[ 4] 0.0-15.0 sec 2173 MBytes 1214 Mbits/sec
$ tcp_benchmark --client --duration 15 --ideal --gso 65536
[ 4] 0.0-15.0 sec 19357 MBytes 10825 Mbits/sec
PiperOrigin-RevId: 240809103
Change-Id: I2637f104db28b5d4c64e1e766c610162a195775a
|
|
PiperOrigin-RevId: 240642903
Change-Id: I16625015123a827d267d60b328a202057264bbd6
|
|
PiperOrigin-RevId: 240483396
Change-Id: Ie75d3ae38af83f1d92f167ff9ba58fa10f5b372b
|
|
This is a preparation for GSO changes (cl/234508902).
RELNOTES[gofers]: Refactor checksum code to include length, which
it already did, but in a convoluted way. Should be a no-op.
PiperOrigin-RevId: 240460794
Change-Id: I537381bc670b5a9f5d70a87aa3eb7252e8f5ace2
|
|
Mirror the ICMPv6 echo implementation in ICMPv4 echo. This removes
unnecessary asynchrony, reduces copying, and reduces complexity.
PiperOrigin-RevId: 240394525
Change-Id: If8f53254154f86772f5e51159765aa23b3b328b8
|
|
PiperOrigin-RevId: 239417224
Change-Id: I14a9adc31a6330a79a6156c105969cd5f1f63d20
|
|
See: https://tools.ietf.org/html/rfc6691#section-2
PiperOrigin-RevId: 239305632
Change-Id: Ie8eb912a43332e6490045dc95570709c5b81855e
|
|
PiperOrigin-RevId: 239194420
Change-Id: Ie193e8ac2b7a6db21195ac85824a335930483971
|
|
PiperOrigin-RevId: 238467634
Change-Id: If4cd8efff7386fbee1195f051d15549b495910a9
|
|
PiperOrigin-RevId: 238336475
Change-Id: I8131e04699028246ebc233953ebb3feca5673940
|
|
Previous memory allocation was excessive (80 MB). Changed
it to use 2 MB instead. There is no drop in perfomance due
to this change:
ab -n 100 -c 10 http://server/latin10m.txt ==> 10 MB file
80 MB: 178 MB/s
2 MB: 181 MB/s
PiperOrigin-RevId: 238321594
Change-Id: I1c8aed13cad5d75f4506d2b406b305117055fbe5
|
|
gonet.PacketConn now implements net.Conn, allowing it to be returned from
net.Dial.Dialer functions.
PiperOrigin-RevId: 238111980
Change-Id: I174884385ff4d9b8e9918fac7bbb5b93ca366ba7
|