Age | Commit message (Collapse) | Author |
|
Same as with broadcast packets, sending of a multicast packet shouldn't require
accessing the route table. The same applies to IPv6 link-local addresses, which
aren't routable at all (they don't belong to any subnet by definition).
PiperOrigin-RevId: 225775870
Change-Id: Ic53e6560c125a83be2be9c3d112e66b36e8dfe7b
|
|
PiperOrigin-RevId: 225421480
Change-Id: I1e9259b0b7e8490164e830b73338a615129c7f0e
|
|
PiperOrigin-RevId: 224696233
Change-Id: I45c425d9e32adee5dcce29ca7439a06567b26014
|
|
Currently sending a broadcast packet (for DHCP, e.g.) requires a "default
route" of the format "0.0.0.0/0 via 0.0.0.0 <intf>". There is no good reason
for this and on devices with several ports this creates a rather akward route
table with lots of such default routes (which defeats the purpose of a default
route).
PiperOrigin-RevId: 224378769
Change-Id: Icd7ec8a206eb08083cff9a837f6f9ab231c73a19
|
|
* Clarify tcpip.Endpoint.Write contract regarding short writes.
* Enforce tcpip.Endpoint.Write contract regarding short writes.
* Update relevant users of tcpip.Endpoint.Write.
PiperOrigin-RevId: 224377586
Change-Id: I24299ecce902eb11317ee13dae3b8d8a7c5b097d
|
|
PiperOrigin-RevId: 224227677
Change-Id: I08b0e0c0574170556269900653e5bcf9e9e5c9c9
|
|
PiperOrigin-RevId: 224214981
Change-Id: I4c1dd5b1c856f7a4f9866a5dda44a5297e92486a
|
|
This removes code that should have never made it in in the first place, but did so due to incomplete testing. With the new tests the original code fails, the new code passes.
PiperOrigin-RevId: 224086966
Change-Id: I646fef76977f4528f3705f497b95fad6b3ec32bc
|
|
The signature of time.now has remained unchanged:
https://github.com/golang/go/blob/c2412a7681d5beaeb5a4ceef3b2b7886361282ce/src/time/time.go#L1072
PiperOrigin-RevId: 224061160
Change-Id: Ic84bd6ee8fb9952cd9ab580bcb0892444ce7c2da
|
|
PiperOrigin-RevId: 224033418
Change-Id: I780be973e8be68ac93e8c9e7a100002e912f40d2
|
|
PiperOrigin-RevId: 224033238
Change-Id: Ie5b1854b29340843b02c123766d290a8738d7631
|
|
PiperOrigin-RevId: 223425575
Change-Id: Idd777e04c69e6ffcbfb0bdbea828a8b8b42d7672
|
|
PiperOrigin-RevId: 222483471
Change-Id: I6720690b20167dd541fdfa5218eba7c9f7483347
|
|
Moving the wakeup logic into the disable blocks is an optimization.
PiperOrigin-RevId: 221677028
Change-Id: Ib5a5a6d52cc77b4bbc5dedcad9ee1dbb3da98deb
|
|
...to (remote, local), reflecting the (correct) names in the implementation of
DeliverNetworkPacket (see tcpip/stack/nic.go).
Also trim the names in DeliverNetworkPacket and elsewhere to avoid stuttering;
since the type is tcpip.LinkAddress, there's no need to include "LinkAddr" in
the parameter names.
Note that every callsite passes arguments in the order (src, dst).
PiperOrigin-RevId: 221514396
Change-Id: I3637454ad0d6e62a19e4dcbc2a16493798bd0f09
|
|
PiperOrigin-RevId: 221484739
Change-Id: I44c71f79f99d0d00a2e70a7f06d7024a62a5de0a
|
|
Previously, TCP_NODELAY was always enabled and we would lie about it being
configurable. TCP_NODELAY is now disabled by default (to match Linux) in the
socket layer so that non-gVisor users don't automatically start using this
questionable optimization.
PiperOrigin-RevId: 221368472
Change-Id: Ib0240f66d94455081f4e0ca94f09d9338b2c1356
|
|
PiperOrigin-RevId: 221117846
Change-Id: I2a43fd8135b1d1194ff81e98644ce6b6182ece50
|
|
PiperOrigin-RevId: 220866996
Change-Id: I89d48215df57c00d6a6ec512fc18712a2ea9080b
|
|
Increase timeout to prevent the entry from being
found when there is delay on the address resolution
goroutine that doesn't mark the request as failed.
PiperOrigin-RevId: 220504789
Change-Id: I7e44fd95d8624bd69962f862fbf5517a81395f2a
|
|
PiperOrigin-RevId: 220314735
Change-Id: Ic519567e43f6caf042b9f223e517da40640b7d38
|
|
PiperOrigin-RevId: 220185891
Change-Id: Iaea73fd7b2fa8c399b989cdcaabf4885f370df4b
|
|
PiperOrigin-RevId: 219571556
Change-Id: I5a1042c1cb05eb2711eb01627fd298bad6c543a6
|
|
Replacing map lookups with slice indexing is higher performance.
PiperOrigin-RevId: 219569901
Change-Id: I9b7cd22abd4b95383025edbd5a80d1c1a4496936
|
|
This field was added in the intial implementation, before Route existed
to pass the local and remote addresses to the packet-writing path.
Today, the Route's members should be respected. A similar bug was
previously fixed in 214650822.
PiperOrigin-RevId: 219474095
Change-Id: Id2a8ee4421d2841c8d88ccb3c193c455086350ee
|
|
PiperOrigin-RevId: 218537640
Change-Id: I1c5f55a46390174e1f5caeff74b1a364fa3268d9
|
|
PiperOrigin-RevId: 218390517
Change-Id: Ic891c1626e62a6c4ed57f8180740872bcd1be177
|
|
The channels {cancel,resCh} have roughly the same lifetime and are used for
roughly the same purpose as an entry's waiters; we can unify the state
management of the two mechanisms, while also reducing unncessary mutex locking
and unlocking.
Made some cosmetic changes while I'm here.
PiperOrigin-RevId: 218343915
Change-Id: Ic69546a2b7b390162b2231f07f335dd6199472d7
|
|
This change also adds extensive testing to the p9 package via mocks. The sanity
checks and type checks are moved from the gofer into the core package, where
they can be more easily validated.
PiperOrigin-RevId: 218296768
Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|
|
PiperOrigin-RevId: 217557656
Change-Id: I63d27635b1a6c12877279995d2d9847b6a19da9b
|
|
* Integrate recvMsg and sendMsg functions into Recv and Send respectively as
they are no longer shared.
* Clean up partial read/write error handling code.
* Re-order code to make sense given that there is no longer a host.endpoint
type.
PiperOrigin-RevId: 217255072
Change-Id: Ib43fe9286452f813b8309d969be11f5fa40694cd
|
|
host.endpoint contained duplicated logic from the sockerpair implementation and
host.ConnectedEndpoint. Remove host.endpoint in favor of a
host.ConnectedEndpoint wrapped in a socketpair end.
PiperOrigin-RevId: 217240096
Change-Id: I4a3d51e3fe82bdf30e2d0152458b8499ab4c987c
|
|
PiperOrigin-RevId: 216770391
Change-Id: Idcdc28b2fe9e1b0b63b8119d445f05a8bcbce81e
|
|
Currently, in the face of FileMem fragmentation and a large sendmsg or
recvmsg call, host sockets may pass > 1024 iovecs to the host, which
will immediately cause the host to return EMSGSIZE.
When we detect this case, use a single intermediate buffer to pass to
the kernel, copying to/from the src/dst buffer.
To avoid creating unbounded intermediate buffers, enforce message size
checks and truncation w.r.t. the send buffer size. The same
functionality is added to netstack unix sockets for feature parity.
PiperOrigin-RevId: 216590198
Change-Id: I719a32e71c7b1098d5097f35e6daf7dd5190eff7
|
|
PiperOrigin-RevId: 214975659
Change-Id: I7bd31a2c54f03ff52203109da312e4206701c44c
|
|
Previously, if address resolution for UDP or Ping sockets required sending
packets using Write in Transport layer, Resolve would return ErrWouldBlock
and Write would return ErrNoLinkAddress. Meanwhile startAddressResolution
would run in background. Further calls to Write using same address would also
return ErrNoLinkAddress until resolution has been completed successfully.
Since Write is not allowed to block and System Calls need to be
interruptible in System Call layer, the caller to Write is responsible for
blocking upon return of ErrWouldBlock.
Now, when startAddressResolution is called a notification channel for
the completion of the address resolution is returned.
The channel will traverse up to the calling function of Write as well as
ErrNoLinkAddress. Once address resolution is complete (success or not) the
channel is closed. The caller would call Write again to send packets and
check if address resolution was compeleted successfully or not.
Fixes google/gvisor#5
Change-Id: Idafaf31982bee1915ca084da39ae7bd468cebd93
PiperOrigin-RevId: 214962200
|
|
There is a subtle bug that is the result of two changes made when upstreaming
ICMPv6 support from Fuchsia:
1) ipv6.endpoint.WritePacket writes the local address it was initialized with,
rather than the provided route's local address
2) ipv6.endpoint.handleICMP doesn't set its route's local address to the ICMP
target address before writing the response
The result is that the ICMP response erroneously uses the target ipv6 address
(rather than icmp) as its source address in the response. When trying to debug
this by fixing (2), we ran into problems with bad ipv6 checksums because (1)
didn't respect the local address of the route being passed to it.
This fixes both problems.
PiperOrigin-RevId: 214650822
Change-Id: Ib6148bf432e6428d760ef9da35faef8e4b610d69
|
|
This is useful for Fuchsia.
PiperOrigin-RevId: 214619681
Change-Id: If5a60dd82365c2eae51a12bbc819e5aae8c76ee9
|
|
PiperOrigin-RevId: 214073949
Change-Id: I8fab916cd77362c13dac2c9dcf2ecc1710d87a5e
|
|
PiperOrigin-RevId: 214039349
Change-Id: Ia7d09c5f85eddd1e5634f3c21b0bd60b10be6bd2
|
|
...by increasing the allotted timeout and using direct comparison rather than
reflect.DeepEqual (which should be faster).
PiperOrigin-RevId: 214027024
Change-Id: I0a2690e65c7e14b4cc118c7312dbbf5267dc78bc
|
|
PiperOrigin-RevId: 214023383
Change-Id: I5a7572f949840fb68a3ffb7342e6a3524bd00864
|
|
tcp.endpoint.hardError is protected by tcp.endpoint.mu.
PiperOrigin-RevId: 213730698
Change-Id: I4e4f322ac272b145b500b1a652fbee0c7b985be2
|
|
This allows a NetworkDispatcher to implement transparent bridging,
assuming all implementations of LinkEndpoint.WritePacket call eth.Encode
with header.EthernetFields.SrcAddr set to the passed
Route.LocalLinkAddress, if it is provided.
PiperOrigin-RevId: 213686651
Change-Id: I446a4ac070970202f0724ef796ff1056ae4dd72a
|
|
From RFC7323#Section-4
The [RFC6298] RTT estimator has weighting factors, alpha and beta, based on an
implicit assumption that at most one RTTM will be sampled per RTT. When
multiple RTTMs per RTT are available to update the RTT estimator, an
implementation SHOULD try to adhere to the spirit of the history specified in
[RFC6298]. An implementation suggestion is detailed in Appendix G.
From RFC7323#appendix-G
Appendix G. RTO Calculation Modification
Taking multiple RTT samples per window would shorten the history calculated
by the RTO mechanism in [RFC6298], and the below algorithm aims to maintain a
similar history as originally intended by [RFC6298].
It is roughly known how many samples a congestion window worth of data will
yield, not accounting for ACK compression, and ACK losses. Such events will
result in more history of the path being reflected in the final value for
RTO, and are uncritical. This modification will ensure that a similar amount
of time is taken into account for the RTO estimation, regardless of how many
samples are taken per window:
ExpectedSamples = ceiling(FlightSize / (SMSS * 2))
alpha' = alpha / ExpectedSamples
beta' = beta / ExpectedSamples
Note that the factor 2 in ExpectedSamples is due to "Delayed ACKs".
Instead of using alpha and beta in the algorithm of [RFC6298], use alpha' and
beta' instead:
RTTVAR <- (1 - beta') * RTTVAR + beta' * |SRTT - R'|
SRTT <- (1 - alpha') * SRTT + alpha' * R'
(for each sample R')
PiperOrigin-RevId: 213644795
Change-Id: I52278b703540408938a8edb8c38be97b37f4a10e
|
|
PiperOrigin-RevId: 213387851
Change-Id: Icc6850761bc11afd0525f34863acd77584155140
|
|
This was previously broken in 212917409, resulting in "missing function body"
compilation errors.
PiperOrigin-RevId: 213323695
Change-Id: I32a95b76a1c73fd731f223062ec022318b979bd4
|
|
PiperOrigin-RevId: 213323501
Change-Id: I0996ddbdcf097588745efe35481085d42dbaf446
|
|
It is the same as buffer.Prependable.View.
PiperOrigin-RevId: 213064166
Change-Id: Ib33b8a2c4da864209d9a0be0a1c113be10b520d3
|