summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip
AgeCommit message (Collapse)Author
2021-01-13Clear neighbor table on NIC downGhanan Gowripalan
Note, this includes static entries to match linux's behaviour. ``` $ ip neigh show dev eth0 192.168.42.1 lladdr fc:ec:da:70:6e:f9 STALE $ sudo ip neigh add 192.168.42.172 lladdr 22:33:44:55:66:77 dev eth0 $ ip neigh show dev eth0 192.168.42.1 lladdr fc:ec:da:70:6e:f9 STALE 192.168.42.172 lladdr 22:33:44:55:66:77 PERMANENT $ sudo ifconfig eth0 down $ ip neigh show dev eth0 $ sudo ifconfig eth0 up $ ip neigh show dev eth0 ``` Test: stack_test.TestClearNeighborCacheOnNICDisable PiperOrigin-RevId: 351696306
2021-01-13Do not resolve remote link address at transport layerGhanan Gowripalan
Link address resolution is performed at the link layer (if required) so we can defer it from the transport layer. When link resolution is required, packets will be queued and sent once link resolution completes. If link resolution fails, the transport layer will receive a control message indicating that the stack failed to route the packet. tcpip.Endpoint.Write no longer returns a channel now that writes do not wait for link resolution at the transport layer. tcpip.ErrNoLinkAddress is no longer used so it is removed. Removed calls to stack.Route.ResolveWith from the transport layer so that link resolution is performed when a route is created in response to an incoming packet (e.g. to complete TCP handshakes or send a RST). Tests: - integration_test.TestForwarding - integration_test.TestTCPLinkResolutionFailure Fixes #4458 RELNOTES: n/a PiperOrigin-RevId: 351684158
2021-01-13Switch uses of os.Getenv that check for empty string to os.LookupEnv.Dean Deng
Whether the variable was found is already returned by syscall.Getenv. os.Getenv drops this value while os.Lookupenv passes it along. PiperOrigin-RevId: 351674032
2021-01-13Clean up the dummy network interface used by UDP testsArthur Sfez
It is now composed by a NetworkInterface interface which lets us delete the methods we don't need. PiperOrigin-RevId: 351613267
2021-01-13[rack] TLP: Recovery detection.Ayush Ranjan
This change implements TLP details enumerated in https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.6 Fixes #5131 PiperOrigin-RevId: 351558449
2021-01-12Drop TransportEndpointID from HandleControlPacketGhanan Gowripalan
When a control packet is delivered, it is delivered to a transport endpoint with a matching stack.TransportEndpointID so there is no need to pass the ID to the endpoint as it already knows its ID. PiperOrigin-RevId: 351497588
2021-01-12Remove unnecessary closureTamir Duberstein
PiperOrigin-RevId: 351491836
2021-01-12[rack] Set up TLP timer and configure timeout.Ayush Ranjan
This change implements TLP details enumerated in https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.5.1. Fixes #5083 PiperOrigin-RevId: 351467357
2021-01-12Fix simple mistakes identified by goreportcard.Adin Scannell
These are primarily simplification and lint mistakes. However, minor fixes are also included and tests added where appropriate. PiperOrigin-RevId: 351425971
2021-01-07netstack: Refactor tcpip.Endpoint.ReadTing-Yu Wang
Read now takes a destination io.Writer, count, options. Keeping the method name Read, in contrast to the Write method. This enables: * direct transfer of views under VV * zero copy It also eliminates the need for sentry to keep a slice of view because userspace had requested a read that is smaller than the view returned, removing the complexity there. Read/Peek/ReadPacket are now consolidated together and some duplicate code is removed. PiperOrigin-RevId: 350636322
2021-01-06Do not filter frames in ethernet link endpointGhanan Gowripalan
Ethernet frames are usually filtered at the hardware-level so there is no need to filter the frames in software. For test purposes, a new link endpoint was introduced to filter frames based on their destination. PiperOrigin-RevId: 350422941
2021-01-06Support add/remove IPv6 multicast group sock optGhanan Gowripalan
IPv4 was always supported but UDP never supported joining/leaving IPv6 multicast groups via socket options. Add: IPPROTO_IPV6, IPV6_JOIN_GROUP/IPV6_ADD_MEMBERSHIP Remove: IPPROTO_IPV6, IPV6_LEAVE_GROUP/IPV6_DROP_MEMBERSHIP Test: integration_test.TestUDPAddRemoveMembershipSocketOption PiperOrigin-RevId: 350396072
2020-12-22Move SO_BINDTODEVICE to socketops.Nayana Bidari
PiperOrigin-RevId: 348696094
2020-12-22Correctly log sniffed ARP packetsTamir Duberstein
This condition was inverted in 360006d. PiperOrigin-RevId: 348679088
2020-12-22Invoke address resolution upon subsequent traffic to Failed neighborPeter Johnston
Removes the period of time in which subseqeuent traffic to a Failed neighbor immediately fails with ErrNoLinkAddress. A Failed neighbor is one in which address resolution fails; or in other words, the neighbor's IP address cannot be translated to a MAC address. This means removing the Failed state for linkAddrCache and allowing transitiong out of Failed into Incomplete for neighborCache. Previously, both caches would transition entries to Failed after address resolution fails. In this state, any subsequent traffic requested within an unreachable time would immediately fail with ErrNoLinkAddress. This does not follow RFC 4861 section 7.3.3: If address resolution fails, the entry SHOULD be deleted, so that subsequent traffic to that neighbor invokes the next-hop determination procedure again. Invoking next-hop determination at this point ensures that alternate default routers are tried. The API for getting a link address for a given address, whether through the link address cache or the neighbor table, is updated to optionally take a callback which will be called when address resolution completes. This allows `Route` to handle completing link resolution internally, so callers of (*Route).Resolve (e.g. endpoints) don’t have to keep track of when it completes and update the Route accordingly. This change also removes the wakers from LinkAddressCache, NeighborCache, and Route in favor of the callbacks, and callers that previously used a waker can now just pass a callback to (*Route).Resolve that will notify the waker on resolution completion. Fixes #4796 Startblock: has LGTM from sbalana and then add reviewer ghanan PiperOrigin-RevId: 348597478
2020-12-21Prefer matching labels and longest matching prefixGhanan Gowripalan
...when performing source address selection for IPv6. These are defined in RFC 6724 section 5 rule 6 (prefer matching label) and rule 8 (use longest matching prefix). This change also considers ULA of global scope instead of its own scope, as per RFC 6724 section 3.1: Also, note that ULAs are considered as global, not site-local, scope but are handled via the prefix policy table as discussed in Section 10.6. Test: stack_test.TestIPv6SourceAddressSelectionScope Startblock: has LGTM from peterjohnston and then add reviewer brunodalbo PiperOrigin-RevId: 348580996
2020-12-21Don't modify a packet header when it can be used by other endpointsAndrei Vagin
Reported-by: syzbot+48c43f82fe7738fceae9@syzkaller.appspotmail.com PiperOrigin-RevId: 348540796
2020-12-21RLock Endpoint in raw.Endpoint.HandlePacketKevin Krakauer
PiperOrigin-RevId: 348530530
2020-12-17[netstack] Implement IP(V6)_RECVERR socket option.Ayush Ranjan
PiperOrigin-RevId: 348055514
2020-12-17[netstack] Implement MSG_ERRQUEUE flag for recvmsg(2).Ayush Ranjan
Introduces the per-socket error queue and the necessary cmsg mechanisms. PiperOrigin-RevId: 348028508
2020-12-17Remove duplicate `return`Tamir Duberstein
PiperOrigin-RevId: 347974624
2020-12-16Cleanup locking in multicast group protocol testsGhanan Gowripalan
Startblock: has LGTM from asfez and then add reviewer tamird PiperOrigin-RevId: 347928471
2020-12-16Automated rollback of changelist 346565589gVisor bot
PiperOrigin-RevId: 347911316
2020-12-16Add support to count the number of packets SACKed.Nayana Bidari
sacked_out is required in RACK to check the number of duplicate acknowledgements during updating the reorder window. If there is no reordering and the value for sacked_out is greater than the classic threshold value 3, then reorder window is set to zero. It is calculated by counting the number of segments sacked in the ACK and is reduced when a cumulative ACK is received which covers the SACK blocks. This value is set to zero when the connection enters recovery. PiperOrigin-RevId: 347872246
2020-12-16Ensure correctness of saved receive windowMithun Iyer
When the scaled receive window size > 65535 (max uint16), we advertise the scaled value as 65535, but are not adjusting the saved receive window value when doing so. This would keep our current window calculation logic to be incorrect, as the saved receive window value is different from what was advertised. Fixes #4903 PiperOrigin-RevId: 347771340
2020-12-15Validate router alert's data lengthGhanan Gowripalan
RFC 2711 specifies that the router alert's length field is always 2 so we should make sure only 2 bytes are read from a router alert option's data field. Test: header.TestIPv6OptionsExtHdrIterErr PiperOrigin-RevId: 347727876
2020-12-15Don't split enabled flag across multicast group stateGhanan Gowripalan
Startblock: has LGTM from asfez and then add reviewer brunodalbo PiperOrigin-RevId: 347716242
2020-12-15Fix error code for connect in raw sockets.Nayana Bidari
PiperOrigin-RevId: 347650354
2020-12-15Fix a data race in packetEPsTing-Yu Wang
packetEPs may get into a state that `len < cap`, casuing append() modifying the original slice storage. Reported-by: syzbot+978dd0e9c2600ab7a76b@syzkaller.appspotmail.com PiperOrigin-RevId: 347634351
2020-12-14Move SO_LINGER option to socketops.Nayana Bidari
PiperOrigin-RevId: 347437786
2020-12-14Move SO_ERROR and SO_OOBINLINE option to socketops.Nayana Bidari
SO_OOBINLINE option is set/get as boolean value, which is the same as linux. As we currently do not support disabling this option, we always return it as true. PiperOrigin-RevId: 347413905
2020-12-12Reduce the memory overhead in IP fragment managementToshi Kikuchi
- Deep-copy pkt.Data and hold it instead of shallow-copy (vv.Clone). This allows the pkt's backing array, which includes the header portion, to be freed. - Remove fragHeap. The fragments are now held in holes struct instead. - Stop reserving the initial capacity of holes slice. PiperOrigin-RevId: 347198744
2020-12-12Introduce IPv6 extension header serialization facilitiesBruno Dal Bo
Adds IPv6 extension header serializer and Hop by Hop options serializer. Add RouterAlert option serializer and use it in MLD. Fixed #4996 Startblock: has LGTM from marinaciocea and then add reviewer ghanan PiperOrigin-RevId: 347174537
2020-12-11Fix panic when IPv4 address is used in sendmsg for IPv6 socketsNayana Bidari
We do not rely on error for getsockopt options(which have boolean values) anymore. This will cause issue in sendmsg where we used to return error for IPV6_V6Only option. Fix the panic by returning error (for sockets other than TCP and UDP) if the address does not match the type(AF_INET/AF_INET6) of the socket. PiperOrigin-RevId: 347063838
2020-12-11[netstack] Decouple tcpip.ControlMessages from the IP control messges.Ayush Ranjan
tcpip.ControlMessages can not contain Linux specific structures which makes it painful to convert back and forth from Linux to tcpip back to Linux when passing around control messages in hostinet and raw sockets. Now we convert to the Linux version of the control message as soon as we are out of tcpip. PiperOrigin-RevId: 347027065
2020-12-10Disable host reassembly for fragments.Bhasker Hariharan
fdbased endpoint was enabling fragment reassembly on the host AF_PACKET socket to ensure that fragments are delivered inorder to the right dispatcher. But this prevents fragments from being delivered to gvisor at all and makes testing of gvisor's fragment reassembly code impossible. The potential impact from this is minimal since IP Fragmentation is not really that prevelant and in cases where we do get fragments we may deliver the fragment out of order to the TCP layer as multiple network dispatchers may process the fragments and deliver a reassembled fragment after the next packet has been delivered to the TCP endpoint. While not desirable I believe the impact from this is minimal due to low prevalence of fragmentation. Also removed PktType and Hatype fields when binding the socket as these are not used when binding. Its just confusing to have them specified. See: https://man7.org/linux/man-pages/man7/packet.7.html "Fields used for binding are sll_family (should be AF_PACKET), sll_protocol, and sll_ifindex." Fixes #5055 PiperOrigin-RevId: 346919439
2020-12-10Use specified source address for IGMP/MLD packetsGhanan Gowripalan
This change also considers interfaces and network endpoints enabled up up to the point all work to disable them are complete. This was needed so that protocols can perform shutdown work while being disabled (e.g. sending a packet which requires the endpoint to be enabled to obtain a source address). Bug #4682, #4861 Fixes #4888 Startblock: has LGTM from peterjohnston and then add reviewer brunodalbo PiperOrigin-RevId: 346869702
2020-12-09Add support for IP_RECVORIGDSTADDR IP option.Bhasker Hariharan
Fixes #5004 PiperOrigin-RevId: 346643745
2020-12-09[netstack] Make tcpip.Error savable.Ayush Ranjan
Earlier we could not save tcpip.Error objects in structs because upon restore the constant's address changes in netstack's error translation map and translating the error would panic because the map is based on the address of the tcpip.Error instead of the error itself. Now I made that translations map use the error message as key instead of the address. Added relevant synchronization mechanisms to protect the structure and initialize it upon restore. PiperOrigin-RevId: 346590485
2020-12-09Do not perform IGMP/MLD on loopback interfacesGhanan Gowripalan
The loopback interface will never have any neighbouring nodes so advertising its interest in multicast groups is unnecessary. Bug #4682, #4861 Startblock: has LGTM from asfez and then add reviewer tamird PiperOrigin-RevId: 346587604
2020-12-09Cap UDP payload size to length informed in UDP headerBruno Dal Bo
startblock: has LGTM from peterjohnston and then add reviewer ghanan,tamird PiperOrigin-RevId: 346565589
2020-12-09export MountTempDirectoryZeling Feng
PiperOrigin-RevId: 346487763
2020-12-07Export IGMP statsArthur Sfez
PiperOrigin-RevId: 346197760
2020-12-07Remove stale commentSam Balana
Removes comment lines about MaxUnsolicitedReportDelay. This is already documented in the comment for GenericMulticastProtocolOptions. PiperOrigin-RevId: 346185053
2020-12-05Fix zero receive window advertisements.Mithun Iyer
With the recent changes db36d948fa63ce950d94a5e8e9ebc37956543661, we try to balance the receive window advertisements between payload lengths vs segment overhead length. This works fine when segment size are much higher than the overhead, but not otherwise. In cases where the segment length is smaller than the segment overhead, we may end up not advertising zero receive window for long time and end up tail-dropping segments. This is especially pronounced when application socket reads are slow or stopped. In this change we do not grow the right edge of the receive window for smaller segment sizes similar to Linux. Also, we keep track of the socket buffer usage and let the window grow if the application is actively reading data. Fixes #4903 PiperOrigin-RevId: 345832012
2020-12-04Remove stack.ReadOnlyAddressableEndpointStateGhanan Gowripalan
Startblock: has LGTM from asfez and then add reviewer tamird PiperOrigin-RevId: 345815146
2020-12-04Introduce IPv4 options serializer and add RouterAlert to IGMPBruno Dal Bo
PiperOrigin-RevId: 345701623
2020-12-03Make `stack.Route` thread safePeter Johnston
Currently we rely on the user to take the lock on the endpoint that owns the route, in order to modify it safely. We can instead move `Route.RemoteLinkAddress` under `Route`'s mutex, and allow non-locking and thread-safe access to other fields of `Route`. PiperOrigin-RevId: 345461586
2020-12-03Support partitions for other tests.Adin Scannell
PiperOrigin-RevId: 345399936
2020-12-02Extract ICMPv4/v6 specific stats to their own typesArthur Sfez
This change lets us split the v4 stats from the v6 stats, which will be useful when adding stats for each network endpoint. PiperOrigin-RevId: 345322615
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 13:17:21 +0000