summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip
AgeCommit message (Collapse)Author
2020-12-09export MountTempDirectoryZeling Feng
PiperOrigin-RevId: 346487763
2020-12-07Export IGMP statsArthur Sfez
PiperOrigin-RevId: 346197760
2020-12-07Remove stale commentSam Balana
Removes comment lines about MaxUnsolicitedReportDelay. This is already documented in the comment for GenericMulticastProtocolOptions. PiperOrigin-RevId: 346185053
2020-12-05Fix zero receive window advertisements.Mithun Iyer
With the recent changes db36d948fa63ce950d94a5e8e9ebc37956543661, we try to balance the receive window advertisements between payload lengths vs segment overhead length. This works fine when segment size are much higher than the overhead, but not otherwise. In cases where the segment length is smaller than the segment overhead, we may end up not advertising zero receive window for long time and end up tail-dropping segments. This is especially pronounced when application socket reads are slow or stopped. In this change we do not grow the right edge of the receive window for smaller segment sizes similar to Linux. Also, we keep track of the socket buffer usage and let the window grow if the application is actively reading data. Fixes #4903 PiperOrigin-RevId: 345832012
2020-12-04Remove stack.ReadOnlyAddressableEndpointStateGhanan Gowripalan
Startblock: has LGTM from asfez and then add reviewer tamird PiperOrigin-RevId: 345815146
2020-12-04Introduce IPv4 options serializer and add RouterAlert to IGMPBruno Dal Bo
PiperOrigin-RevId: 345701623
2020-12-03Make `stack.Route` thread safePeter Johnston
Currently we rely on the user to take the lock on the endpoint that owns the route, in order to modify it safely. We can instead move `Route.RemoteLinkAddress` under `Route`'s mutex, and allow non-locking and thread-safe access to other fields of `Route`. PiperOrigin-RevId: 345461586
2020-12-03Support partitions for other tests.Adin Scannell
PiperOrigin-RevId: 345399936
2020-12-02Extract ICMPv4/v6 specific stats to their own typesArthur Sfez
This change lets us split the v4 stats from the v6 stats, which will be useful when adding stats for each network endpoint. PiperOrigin-RevId: 345322615
2020-12-02Abandon reassembly of a packet if fragments overlapArthur Sfez
However, receiving duplicated fragments will not cause reassembly to fail. This is what Linux does too: https://github.com/torvalds/linux/blob/38525c6/net/ipv4/inet_fragment.c#L355 PiperOrigin-RevId: 345309546
2020-12-02[netstack] Add back EndpointInfo struct in tcp.Ayush Ranjan
This was removed in an earlier commit. This should remain as it allows to add tcp-only state to be exposed. PiperOrigin-RevId: 345246155
2020-12-01Deflake stack_test.TestRouterSolicitationGhanan Gowripalan
...by using the fake clock. TestRouterSolicitation no longer runs its sub-tests in parallel now that the sub-tests are not long-running - the fake clock simulates time moving forward. PiperOrigin-RevId: 345165794
2020-12-01Correctly lock when listing neighbor entriesGhanan Gowripalan
PiperOrigin-RevId: 345162450
2020-12-01Track join count in multicast group protocol stateGhanan Gowripalan
Before this change, the join count and the state for IGMP/MLD was held across different types which required multiple locks to be held when accessing a multicast group's state. Bug #4682, #4861 Fixes #4916 PiperOrigin-RevId: 345019091
2020-11-30Fix deadlock in UDP handleControlPacket path.Bhasker Hariharan
Fixing the sendto deadlock exposed yet another deadlock where a lock inversion occurs on the handleControlPacket path where e.mu and demuxer.epsByNIC.mu are acquired in reverse order from say when RegisterTransportEndpoint is called in endpoint.Connect(). This fix sidesteps the issue by just making endpoint.state an atomic and gets rid of the need to acquire e.mu in e.HandleControlPacket. PiperOrigin-RevId: 344939895
2020-11-30Add more fragment reassembly testsToshi Kikuchi
These tests check if a maximum-sized (64k) packet is reassembled without receiving a fragment with MF flag set to zero. PiperOrigin-RevId: 344913172
2020-11-30Perform IGMP/MLD when the NIC is enabled/disabledGhanan Gowripalan
Test: ip_test.TestMGPWithNICLifecycle Bug #4682, #4861 PiperOrigin-RevId: 344888091
2020-11-27Don't add a temporary address to send DAD/RS packetsGhanan Gowripalan
Bug #4803 PiperOrigin-RevId: 344553664
2020-11-26[netstack] Add SOL_TCP options to SocketOptions.Ayush Ranjan
Ports the following options: - TCP_NODELAY - TCP_CORK - TCP_QUICKACK Also deletes the {Get/Set}SockOptBool interface methods from all implementations PiperOrigin-RevId: 344378824
2020-11-25[netstack] Add SOL_IP and SOL_IPV6 options to SocketOptions.Ayush Ranjan
We will use SocketOptions for all kinds of options, not just SOL_SOCKET options because (1) it is consistent with Linux which defines all option variables on the top level socket struct, (2) avoid code complexity. Appropriate checks have been added for matching option level to the endpoint type. Ported the following options to this new utility: - IP_MULTICAST_LOOP - IP_RECVTOS - IPV6_RECVTCLASS - IP_PKTINFO - IP_HDRINCL - IPV6_V6ONLY Changes in behavior (these are consistent with what Linux does AFAICT): - Now IP_MULTICAST_LOOP can be set for TCP (earlier it was a noop) but does not affect the endpoint itself. - We can now getsockopt IP_HDRINCL (earlier we would get an error). - Now we return ErrUnknownProtocolOption if SOL_IP or SOL_IPV6 options are used on unix sockets. - Now we return ErrUnknownProtocolOption if SOL_IPV6 options are used on non AF_INET6 endpoints. This change additionally makes the following modifications: - Add State() uint32 to commonEndpoint because both tcpip.Endpoint and transport.Endpoint interfaces have it. It proves to be quite useful. - Gets rid of SocketOptionsHandler.IsListening(). It was an anomaly as it was not a handler. It is now implemented on netstack itself. - Gets rid of tcp.endpoint.EndpointInfo and directly embeds stack.TransportEndpointInfo. There was an unnecessary level of embedding which served no purpose. - Removes some checks dual_stack_test.go that used the errors from GetSockOptBool(tcpip.V6OnlyOption) to confirm some state. This is not consistent with the new design and also seemed to be testing the implementation instead of behavior. PiperOrigin-RevId: 344354051
2020-11-25Support listener-side MLDv1Ghanan Gowripalan
...as defined by RFC 2710. Querier (router)-side MLDv1 is not yet supported. The core state machine is shared with IGMPv2. This is guarded behind a flag (ipv6.Options.MLDEnabled). Tests: ip_test.TestMGP* Bug #4861 PiperOrigin-RevId: 344344095
2020-11-25Make stack.Route safe to access concurrentlyGhanan Gowripalan
Multiple goroutines may use the same stack.Route concurrently so the stack.Route should make sure that any functions called on it are thread-safe. Fixes #4073 PiperOrigin-RevId: 344320491
2020-11-24Correctly lock when removing neighbor entriesSam Balana
Fix a panic when two entries in Failed state are removed at the same time. PiperOrigin-RevId: 344143777
2020-11-24Report correct pointer value for "bad next header" ICMP errorJulian Elischer
Because the code handles a bad header as "payload" right up to the last moment we need to make sure payload handling does not remove the error information. Fixes #4909 PiperOrigin-RevId: 344141690
2020-11-24Track number of packets queued to Failed neighborsSam Balana
Add a NIC-specific neighbor table statistic so we can determine how many packets have been queued to Failed neighbors, indicating an unhealthy local network. This change assists us to debug in-field issues where subsequent traffic to a neighbor fails. Fixes #4819 PiperOrigin-RevId: 344131119
2020-11-24Extract IGMPv2 core state machineGhanan Gowripalan
The IGMPv2 core state machine can be shared with MLDv1 since they are almost identical, ignoring specific addresses, constants and packets. Bug #4682, #4861 PiperOrigin-RevId: 344102615
2020-11-24Deduplicate code in ipv6.protocolGhanan Gowripalan
PiperOrigin-RevId: 344009602
2020-11-23Use time.Duration for IGMP Max Response Time fieldGhanan Gowripalan
Bug #4682 PiperOrigin-RevId: 343993297
2020-11-19Perform IGMPv2 when joining IPv4 multicast groupsRyan Heacock
Added headers, stats, checksum parsing capabilities from RFC 2236 describing IGMPv2. IGMPv2 state machine is implemented for each condition, sending and receiving IGMP Membership Reports and Leave Group messages with backwards compatibility with IGMPv1 routers. Test: * Implemented igmp header parser and checksum calculator in header/igmp_test.go * ipv4/igmp_test.go tests incoming and outgoing IGMP messages and pathways. * Added unit test coverage for IGMPv2 RFC behavior + IGMPv1 backwards compatibility in ipv4/igmp_test.go. Fixes #4682 PiperOrigin-RevId: 343408809
2020-11-19Add types to parse MLD messagesGhanan Gowripalan
Preparing for upcoming CLs that add MLD functionality. Bug #4861 Test: header.TestMLD PiperOrigin-RevId: 343391556
2020-11-19Fix possible panic due to bad data.Julian Elischer
Found by a Fuzzer. Reported-by: syzbot+619fa10be366d553ef7f@syzkaller.appspotmail.com PiperOrigin-RevId: 343379575
2020-11-19Propagate IP address prefix from host to netstackFabricio Voznika
Closes #4022 PiperOrigin-RevId: 343378647
2020-11-19Require sync.Mutex to lock and unlock from the same goroutineMichael Pratt
We would like to track locks ordering to detect ordering violations. Detecting violations is much simpler if mutexes must be unlocked by the same goroutine that locked them. Thus, as a first step to tracking lock ordering, add this lock/unlock requirement to gVisor's sync.Mutex. This is more strict than the Go standard library's sync.Mutex, but initial testing indicates only a single lock that is used across goroutines. The new sync.CrossGoroutineMutex relaxes the requirement (but will not provide lock order checking). Due to the additional overhead, enforcement is only enabled with the "checklocks" build tag. Build with this tag using: bazel build --define=gotags=checklocks ... From my spot-checking, this has no changed inlining properties when disabled. Updates #4804 PiperOrigin-RevId: 343370200
2020-11-19Don't hold AddressEndpoints for multicast addressesGhanan Gowripalan
Group addressable endpoints can simply check if it has joined the multicast group without maintaining address endpoints. This also helps remove the dependency on AddressableEndpoint from GroupAddressableEndpoint. Now that group addresses are not tracked with address endpoints, we can avoid accidentally obtaining a route with a multicast local address. PiperOrigin-RevId: 343336912
2020-11-19Remove unused NoChecksumOptionBruno Dal Bo
Migration to unified socket options left this behind. PiperOrigin-RevId: 343305434
2020-11-19Fix some code not using NewPacketBuffer for creating a PacketBuffer.Ting-Yu Wang
PiperOrigin-RevId: 343299993
2020-11-18[netstack] Move SO_KEEPALIVE and SO_ACCEPTCONN option to SocketOptions.Ayush Ranjan
PiperOrigin-RevId: 343217712
2020-11-18Remove unused methods from stack.RouteGhanan Gowripalan
PiperOrigin-RevId: 343211553
2020-11-18[netstack] Move SO_REUSEPORT and SO_REUSEADDR option to SocketOptions.Ayush Ranjan
This changes also introduces: - `SocketOptionsHandler` interface which can be implemented by endpoints to handle endpoint specific behavior on SetSockOpt. This is analogous to what Linux does. - `DefaultSocketOptionsHandler` which is a default implementation of the above. This is embedded in all endpoints so that we don't have to uselessly implement empty functions. Endpoints with specific behavior can override the embedded method by manually defining its own implementation. PiperOrigin-RevId: 343158301
2020-11-18Automated rollback of changelist 342700744Nayana Bidari
PiperOrigin-RevId: 343152780
2020-11-18[netstack] Move SO_NO_CHECK option to SocketOptions.Ayush Ranjan
PiperOrigin-RevId: 343146856
2020-11-18Fix loopback subnet routing errorGhanan Gowripalan
Packets should be properly routed when sending packets to addresses in the loopback subnet which are not explicitly assigned to the loopback interface. Tests: - integration_test.TestLoopbackAcceptAllInSubnetUDP - integration_test.TestLoopbackAcceptAllInSubnetTCP PiperOrigin-RevId: 343135643
2020-11-18[netstack] Move SO_PASSCRED option to SocketOptions.Ayush Ranjan
This change also makes the following fixes: - Make SocketOptions use atomic operations instead of having to acquire/drop locks upon each get/set option. - Make documentation more consistent. - Remove tcpip.SocketOptions from socketOpsCommon because it already exists in transport.Endpoint. - Refactors get/set socket options tests to be easily extendable. PiperOrigin-RevId: 343103780
2020-11-18Introduce stack.WritePacketToRemote, remove LinkEndpoint.WriteRawPacketBruno Dal Bo
Redefine stack.WritePacket into stack.WritePacketToRemote which lets the NIC decide whether to append link headers. PiperOrigin-RevId: 343071742
2020-11-17Remove sniffer from gonet_test.Bhasker Hariharan
This was added by mistake in cl/342868552. PiperOrigin-RevId: 343021431
2020-11-17Fix endpoint.Read() when endpoint is in StateError.Bhasker Hariharan
If the endpoint is in StateError but e.hardErrorLocked() returns nil then return ErrClosedForRecieve. This can happen if a concurrent write on the same endpoint was in progress when the endpoint transitioned to an error state. PiperOrigin-RevId: 343018257
2020-11-17Add per-sniffer instance log prefixBruno Dal Bo
A prefix associated with a sniffer instance can help debug situations where more than one NIC (i.e. more than one sniffer) exists. PiperOrigin-RevId: 342950027
2020-11-17Fix possible deadlock in UDP.Write().Bhasker Hariharan
In UDP endpoint.Write() sendUDP is called with e.mu Rlocked. But if this happens to send a datagram over loopback which ends up generating an ICMP response of say ErrNoPortReachable, the handling of the response in HandleControlPacket also acquires e.mu using RLock. This is mostly fine unless there is a competing caller trying to acquire e.mu in exclusive mode using Lock(). This will deadlock as a caller waiting in Lock() disallows an new RLocks() to ensure it can actually acquire the Lock. This is documented here https://golang.org/pkg/sync/#RWMutex. This change releases the endpoint mutex before calling sendUDP to resolve the possibility of the deadlock. Reported-by: syzbot+537989797548c66e8ee3@syzkaller.appspotmail.com Reported-by: syzbot+eb0b73b4ab486f7673ba@syzkaller.appspotmail.com PiperOrigin-RevId: 342894148
2020-11-17Fix SO_ERROR behavior for TCP in gVisor.Bhasker Hariharan
Fixes the behaviour of SO_ERROR for tcp sockets where in linux it returns sk->sk_err and if sk->sk_err is 0 then it returns sk->sk_soft_err. In gVisor TCP we endpoint.HardError is the equivalent of sk->sk_err and endpoint.LastError holds soft errors. This change brings this into alignment with Linux such that both hard/soft errors are cleared when retrieved using getsockopt(.. SO_ERROR) is called on a socket. Fixes #3812 PiperOrigin-RevId: 342868552
2020-11-16Remove ARP address workaroundGhanan Gowripalan
- Make AddressableEndpoint optional for NetworkEndpoint. Not all NetworkEndpoints need to support addressing (e.g. ARP), so AddressableEndpoint should only be implemented for protocols that support addressing such as IPv4 and IPv6. With this change, tcpip.ErrNotSupported will be returned by the stack when attempting to modify addresses on a network endpoint that does not support addressing. Now that packets are fully handled at the network layer, and (with this change) addresses are optional for network endpoints, we no longer need the workaround for ARP where a fake ARP address was added to each NIC that performs ARP so that packets would be delivered to the ARP layer. PiperOrigin-RevId: 342722547
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 09:43:28 +0000