summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip
AgeCommit message (Collapse)Author
2021-01-26Initialize the send buffer handler in endpoint creation.Nayana Bidari
- This CL will initialize the function handler used for getting the send buffer size limits during endpoint creation and does not require the caller of SetSendBufferSize(..) to know the endpoint type(tcp/udp/..) PiperOrigin-RevId: 353992634
2021-01-26Do not use stack.Route to send NDP NSGhanan Gowripalan
When sending packets through a stack.Route, we attempt to perform link resolution. Neighbor Solicitation messages do not need link resolution to be performed so send the packets out the interface directly instead. PiperOrigin-RevId: 353967435
2021-01-26Implement error on pointersTamir Duberstein
This improves type-assertion safety. PiperOrigin-RevId: 353931228
2021-01-26Fix couple of potential route leaks.Bhasker Hariharan
connect() can be invoked multiple times on UDP/RAW sockets and in such a case we should release the cached route from the previous connect. Fixes #5359 PiperOrigin-RevId: 353919891
2021-01-26Drop nicID from transport endpoint reg/cleanup fnsGhanan Gowripalan
...as it is unused. PiperOrigin-RevId: 353896981
2021-01-26Move SO_SNDBUF to socketops.Nayana Bidari
This CL moves {S,G}etsockopt of SO_SNDBUF from all endpoints to socketops. For unix sockets, we do not support setting of this option. PiperOrigin-RevId: 353871484
2021-01-25Adjust included data size on icmp errorsJulian Elischer
The RFC for icmpv6 specifies that an errant packet should be included in the returned ICMP packet, and that it should include up to the amount needed to fill the minimum MTU (1280 bytes) if possible. The current code included the Link header in that calculation but the RFC is referring to the IP MTU not the link MTU. Some conformance tests check this and report an error agains the stack for this. The full header length shoudl however continue to be used when allocating header space. Make the same change for IPv4 for consistency. Add a test for icmp payload sizing. Test that the included data in an ICMP error packet conforms to the requirements of RFC 972, RFC 4443 section 2.4 and RFC 1812 Section 4.3.2.3. Fixes #5311 PiperOrigin-RevId: 353790203
2021-01-25Add per endpoint ARP statisticsArthur Sfez
The ARP stat NetworkUnreachable was removed, and was replaced by InterfaceHasNoLocalAddress. No stats are recorded when dealing with an missing endpoint (ErrNotConnected) (because if there is no endpoint, there is no valid per-endpoint stats). PiperOrigin-RevId: 353759462
2021-01-25fdbased: Dedup code related to iovec readingTing-Yu Wang
PiperOrigin-RevId: 353755271
2021-01-25Unlock tcp endpoint on zero-length atomic writesTamir Duberstein
Rewrite tcp.endpoint.Write to avoid manual locking and unlocking. This should prevent similar mistakes in the future. PiperOrigin-RevId: 353675734
2021-01-22Refactor GetMainNICAddressArthur Sfez
It previously returned an error but it could only be UnknownNICID. It now returns a boolean to indicate whether the nic exists or not. PiperOrigin-RevId: 353337489
2021-01-22Do not modify IGMP packets when verifying checksumGhanan Gowripalan
PiperOrigin-RevId: 353336894
2021-01-22Pass RouteInfo to the route resolve callbackGhanan Gowripalan
The route resolution callback will be called with a stack.ResolvedFieldsResult which will hold the route info so callers can avoid attempting resolution again to check if a previous resolution attempt succeeded or not. Test: integration_test.TestRouteResolvedFields PiperOrigin-RevId: 353319019
2021-01-22Define tcpip.Payloader in terms of io.ReaderTamir Duberstein
Fixes #1509. PiperOrigin-RevId: 353295589
2021-01-21Resolve static link addresses in GetLinkAddressGhanan Gowripalan
If a network address has a static mapping to a link address, calculate it in GetLinkAddress. Test: stack_test.TestStaticGetLinkAddress PiperOrigin-RevId: 353179616
2021-01-21iptables: support matching the input interface nameToshi Kikuchi
We have support for the output interface name, but not for the input interface name. This change adds the support for the input interface name, and adds the test cases for it. Fixes #5300 PiperOrigin-RevId: 353179389
2021-01-21Only use callback for GetLinkAddressGhanan Gowripalan
GetLinkAddress's callback will be called immediately with a stack.LinkResolutionResult which will hold the link address so no need to also return the link address from the function. Fixes #5151. PiperOrigin-RevId: 353157857
2021-01-21Do not cache remote link address in RouteGhanan Gowripalan
...unless explicitly requested via ResolveWith. Remove cancelled channels from pending packets as we can use the link resolution channel in a FIFO to limit the number of maximum pending resolutions we should queue packets for. This change also defers starting the goroutine that handles link resolution completion to when link resolution succeeds, fails or gets cancelled due to the max number of pending resolutions being reached. Fixes #751. PiperOrigin-RevId: 353130577
2021-01-21Queue packets in WritePackets when resolving link addressGhanan Gowripalan
Test: integration_test.TestWritePacketsLinkResolution Fixes #4458. PiperOrigin-RevId: 353108826
2021-01-21Populate EgressRoute, GSO, Netproto in NICGhanan Gowripalan
fdbased and qdisc layers expect these fields to already be populated before being reached. PiperOrigin-RevId: 353099492
2021-01-20Change the way the IP options report problemsJulian Elischer
The error messages are not needed or used as these are not processing errors so much as errors to be reported back to the packet sender. Implicitly describe whether each error should generate ICMP packets or not. Most do but there are a couple that do not. Slightly alter some test expectations for Linux compatibility and add a couple more. Improve Linux compatibility on error packet returns. Some cosmetic changes to tests to match the upcoming packet impact version of the same tests. PiperOrigin-RevId: 352889785
2021-01-19Do not have a stack-wide linkAddressCacheGhanan Gowripalan
Link addresses are cached on a per NIC basis so instead of having a single cache that includes the NIC ID for neighbor entry lookups, use a single cache per NIC. PiperOrigin-RevId: 352684111
2021-01-19Per NIC NetworkEndpoint statisticsArthur Sfez
To facilitate the debugging of multi-homed setup, track Network protocols statistics for each endpoint. Note that the original stack-wide stats still exist. A new type of statistic counter is introduced, which track two versions of a stat at the same time. This lets a network endpoint increment both the local stat and the stack-wide stat at the same time. Fixes #4605 PiperOrigin-RevId: 352663276
2021-01-19Drop CheckLocalAddress from LinkAddressCacheGhanan Gowripalan
PiperOrigin-RevId: 352623277
2021-01-17Do not use a stack-wide queue of pending packetsGhanan Gowripalan
Packets may be pending on link resolution to complete before being sent. Link resolution is performed for neighbors which are unique to a NIC so hold link resolution related state under the NIC, not the stack. Note, this change may result in more queued packets but that is okay as RFC 4861 section 7.2.2 recommends that the stack maintain a queue of packets for each neighbor that is waiting for link resolution to complete, not a fixed limit per stack. PiperOrigin-RevId: 352322155
2021-01-15Resolve known link address on route creationGhanan Gowripalan
If a Route is being created through a link that requires link address resolution and a remote address that has a known mapping to a link address, populate the link address when the route is created. This removes the need for neighbor/link address caches to perform this check. Fixes #5149 PiperOrigin-RevId: 352122401
2021-01-15Support GetLinkAddress with neighborCacheGhanan Gowripalan
Test: integration_test.TestGetLinkAddress PiperOrigin-RevId: 352119404
2021-01-15Only pass stack.Route's fields to LinkEndpointsGhanan Gowripalan
stack.Route is used to send network packets and resolve link addresses. A LinkEndpoint does not need to do either of these and only needs the route's fields at the time of the packet write request. Since LinkEndpoints only need the route's fields when writing packets, pass a stack.RouteInfo instead. PiperOrigin-RevId: 352108405
2021-01-15Remove count argument from tcpip.Endpoint.ReadTamir Duberstein
The same intent can be specified via the io.Writer. PiperOrigin-RevId: 352098747
2021-01-15[rack] Retransmit the probe segment after the probe timer expires.Ayush Ranjan
This change implements TLP details enumerated in https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.5.2. Fixes #5084 PiperOrigin-RevId: 352093473
2021-01-15Correctly return EMSGSIZE when packet is too big in raw socket.Ting-Yu Wang
IPv4 previously accepts the packet, while IPv6 panics. Neither is the behavior in Linux. splice() in Linux has different behavior than in gVisor. This change documents it in the SpliceTooLong test. Reported-by: syzbot+b550e78e5c24d1d521f2@syzkaller.appspotmail.com PiperOrigin-RevId: 352091286
2021-01-15Populate EgressRoute, GSO, Netproto for batch writesGhanan Gowripalan
We loop over the list of packets anyways so setting these aren't expensive. Now that they are populated only by the link endpoint that uses them, TCP does not need to. PiperOrigin-RevId: 352090853
2021-01-15Add sanity check on return values from WriteTing-Yu Wang
io.Writer.Write requires err to be non-nil if n < len(v). We could allow this but it will be irreversible if users depend on this behavior. Ported the test that discovered this. PiperOrigin-RevId: 352065946
2021-01-14Add stats for ARPArthur Sfez
Fixes #4963 Startblock: has LGTM from sbalana and then add reviewer ghanan PiperOrigin-RevId: 351886320
2021-01-14Remove impossible errorsTamir Duberstein
Commit 25b5ec7 moved link address resolution out of the transport layer; special handling of link address resolution is no longer necessary in tcp. PiperOrigin-RevId: 351839254
2021-01-13Clear neighbor table on NIC downGhanan Gowripalan
Note, this includes static entries to match linux's behaviour. ``` $ ip neigh show dev eth0 192.168.42.1 lladdr fc:ec:da:70:6e:f9 STALE $ sudo ip neigh add 192.168.42.172 lladdr 22:33:44:55:66:77 dev eth0 $ ip neigh show dev eth0 192.168.42.1 lladdr fc:ec:da:70:6e:f9 STALE 192.168.42.172 lladdr 22:33:44:55:66:77 PERMANENT $ sudo ifconfig eth0 down $ ip neigh show dev eth0 $ sudo ifconfig eth0 up $ ip neigh show dev eth0 ``` Test: stack_test.TestClearNeighborCacheOnNICDisable PiperOrigin-RevId: 351696306
2021-01-13Do not resolve remote link address at transport layerGhanan Gowripalan
Link address resolution is performed at the link layer (if required) so we can defer it from the transport layer. When link resolution is required, packets will be queued and sent once link resolution completes. If link resolution fails, the transport layer will receive a control message indicating that the stack failed to route the packet. tcpip.Endpoint.Write no longer returns a channel now that writes do not wait for link resolution at the transport layer. tcpip.ErrNoLinkAddress is no longer used so it is removed. Removed calls to stack.Route.ResolveWith from the transport layer so that link resolution is performed when a route is created in response to an incoming packet (e.g. to complete TCP handshakes or send a RST). Tests: - integration_test.TestForwarding - integration_test.TestTCPLinkResolutionFailure Fixes #4458 RELNOTES: n/a PiperOrigin-RevId: 351684158
2021-01-13Switch uses of os.Getenv that check for empty string to os.LookupEnv.Dean Deng
Whether the variable was found is already returned by syscall.Getenv. os.Getenv drops this value while os.Lookupenv passes it along. PiperOrigin-RevId: 351674032
2021-01-13Clean up the dummy network interface used by UDP testsArthur Sfez
It is now composed by a NetworkInterface interface which lets us delete the methods we don't need. PiperOrigin-RevId: 351613267
2021-01-13[rack] TLP: Recovery detection.Ayush Ranjan
This change implements TLP details enumerated in https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.6 Fixes #5131 PiperOrigin-RevId: 351558449
2021-01-12Drop TransportEndpointID from HandleControlPacketGhanan Gowripalan
When a control packet is delivered, it is delivered to a transport endpoint with a matching stack.TransportEndpointID so there is no need to pass the ID to the endpoint as it already knows its ID. PiperOrigin-RevId: 351497588
2021-01-12Remove unnecessary closureTamir Duberstein
PiperOrigin-RevId: 351491836
2021-01-12[rack] Set up TLP timer and configure timeout.Ayush Ranjan
This change implements TLP details enumerated in https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.5.1. Fixes #5083 PiperOrigin-RevId: 351467357
2021-01-12Fix simple mistakes identified by goreportcard.Adin Scannell
These are primarily simplification and lint mistakes. However, minor fixes are also included and tests added where appropriate. PiperOrigin-RevId: 351425971
2021-01-07netstack: Refactor tcpip.Endpoint.ReadTing-Yu Wang
Read now takes a destination io.Writer, count, options. Keeping the method name Read, in contrast to the Write method. This enables: * direct transfer of views under VV * zero copy It also eliminates the need for sentry to keep a slice of view because userspace had requested a read that is smaller than the view returned, removing the complexity there. Read/Peek/ReadPacket are now consolidated together and some duplicate code is removed. PiperOrigin-RevId: 350636322
2021-01-06Do not filter frames in ethernet link endpointGhanan Gowripalan
Ethernet frames are usually filtered at the hardware-level so there is no need to filter the frames in software. For test purposes, a new link endpoint was introduced to filter frames based on their destination. PiperOrigin-RevId: 350422941
2021-01-06Support add/remove IPv6 multicast group sock optGhanan Gowripalan
IPv4 was always supported but UDP never supported joining/leaving IPv6 multicast groups via socket options. Add: IPPROTO_IPV6, IPV6_JOIN_GROUP/IPV6_ADD_MEMBERSHIP Remove: IPPROTO_IPV6, IPV6_LEAVE_GROUP/IPV6_DROP_MEMBERSHIP Test: integration_test.TestUDPAddRemoveMembershipSocketOption PiperOrigin-RevId: 350396072
2020-12-22Move SO_BINDTODEVICE to socketops.Nayana Bidari
PiperOrigin-RevId: 348696094
2020-12-22Correctly log sniffed ARP packetsTamir Duberstein
This condition was inverted in 360006d. PiperOrigin-RevId: 348679088
2020-12-22Invoke address resolution upon subsequent traffic to Failed neighborPeter Johnston
Removes the period of time in which subseqeuent traffic to a Failed neighbor immediately fails with ErrNoLinkAddress. A Failed neighbor is one in which address resolution fails; or in other words, the neighbor's IP address cannot be translated to a MAC address. This means removing the Failed state for linkAddrCache and allowing transitiong out of Failed into Incomplete for neighborCache. Previously, both caches would transition entries to Failed after address resolution fails. In this state, any subsequent traffic requested within an unreachable time would immediately fail with ErrNoLinkAddress. This does not follow RFC 4861 section 7.3.3: If address resolution fails, the entry SHOULD be deleted, so that subsequent traffic to that neighbor invokes the next-hop determination procedure again. Invoking next-hop determination at this point ensures that alternate default routers are tried. The API for getting a link address for a given address, whether through the link address cache or the neighbor table, is updated to optionally take a callback which will be called when address resolution completes. This allows `Route` to handle completing link resolution internally, so callers of (*Route).Resolve (e.g. endpoints) don’t have to keep track of when it completes and update the Route accordingly. This change also removes the wakers from LinkAddressCache, NeighborCache, and Route in favor of the callbacks, and callers that previously used a waker can now just pass a callback to (*Route).Resolve that will notify the waker on resolution completion. Fixes #4796 Startblock: has LGTM from sbalana and then add reviewer ghanan PiperOrigin-RevId: 348597478
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 02:45:58 +0000