summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip
AgeCommit message (Collapse)Author
2020-09-09Fix data race in tcp.GetSockOpt.Bhasker Hariharan
e.ID can't be read without holding e.mu. GetSockOpt was reading e.ID when looking up OriginalDst without holding e.mu. PiperOrigin-RevId: 330562293
2020-09-09Improve type safety for transport protocol optionsGhanan Gowripalan
The existing implementation for TransportProtocol.{Set}Option take arguments of an empty interface type which all types (implicitly) implement; any type may be passed to the functions. This change introduces marker interfaces for transport protocol options that may be set or queried which transport protocol option types implement to ensure that invalid types are caught at compile time. Different interfaces are used to allow the compiler to enforce read-only or set-only socket options. RELNOTES: n/a PiperOrigin-RevId: 330559811
2020-09-09Use fine-grained mutex for stack.cleanupEndpoints.Bhasker Hariharan
stack.cleanupEndpoints is protected by the stack.mu but that can cause contention as the stack mutex is already acquired in a lot of hot paths during new endpoint creation /cleanup etc. Moving this to a fine grained mutex should reduce contention on the stack.mu. PiperOrigin-RevId: 330026151
2020-09-09Use atomic.Value for Stack.tcpProbeFunc.Jamie Liu
b/166980357#comment56 shows: - 837 goroutines blocked in: gvisor/pkg/sync/sync.(*RWMutex).Lock gvisor/pkg/tcpip/stack/stack.(*Stack).StartTransportEndpointCleanup gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).cleanupLocked gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).completeWorkerLocked gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).protocolMainLoop.func1 gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).protocolMainLoop - 695 goroutines blocked in: gvisor/pkg/sync/sync.(*RWMutex).Lock gvisor/pkg/tcpip/stack/stack.(*Stack).CompleteTransportEndpointCleanup gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).cleanupLocked gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).completeWorkerLocked gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).protocolMainLoop.func1 gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).protocolMainLoop - 3882 goroutines blocked in: gvisor/pkg/sync/sync.(*RWMutex).Lock gvisor/pkg/tcpip/stack/stack.(*Stack).GetTCPProbe gvisor/pkg/tcpip/transport/tcp/tcp.newEndpoint gvisor/pkg/tcpip/transport/tcp/tcp.(*protocol).NewEndpoint gvisor/pkg/tcpip/stack/stack.(*Stack).NewEndpoint All of these are contending on Stack.mu. Stack.StartTransportEndpointCleanup() and Stack.CompleteTransportEndpointCleanup() insert/delete TransportEndpoints in a map (Stack.cleanupEndpoints), and the former also does endpoint unregistration while holding Stack.mu, so it's not immediately clear how feasible it is to replace the map with a mutex-less implementation or how much doing so would help. However, Stack.GetTCPProbe() just reads a function object (Stack.tcpProbeFunc) that is almost always nil (as far as I can tell, Stack.AddTCPProbe() is only called in tests), and it's called for every new TCP endpoint. So converting it to an atomic.Value should significantly reduce contention on Stack.mu, improving TCP endpoint creation latency and allowing TCP endpoint cleanup to proceed. PiperOrigin-RevId: 330004140
2020-09-09Fix Accept to not return error for sockets in accept queue.Bhasker Hariharan
Accept on gVisor will return an error if a socket in the accept queue was closed before Accept() was called. Linux will return the new fd even if the returned socket is already closed by the peer say due to a RST being sent by the peer. This seems to be intentional in linux more details on the github issue. Fixes #3780 PiperOrigin-RevId: 329828404
2020-09-09Fix handling of unacceptable ACKs during close.Mithun Iyer
On receiving an ACK with unacceptable ACK number, in a closing state, TCP, needs to reply back with an ACK with correct seq and ack numbers and remain in same state. This change is as per RFC793 page 37, but with a difference that it does not apply to ESTABLISHED state, just as in Linux. Also add more tests to check for OTW sequence number and unacceptable ack numbers in these states. Fixes #3785 PiperOrigin-RevId: 329616283
2020-09-09Automated rollback of changelist 328350576Nayana Bidari
PiperOrigin-RevId: 329526153
2020-09-09Don't bind loopback to all IPs in an IPv6 subnetGhanan Gowripalan
An earlier change considered the loopback bound to all addresses in an assigned subnet. This should have only be done for IPv4 to maintain compatability with Linux: ``` $ ip addr show dev lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ... link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever $ ping 2001:db8::1 PING 2001:db8::1(2001:db8::1) 56 data bytes ^C --- 2001:db8::1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3062ms $ ping 2001:db8::2 PING 2001:db8::2(2001:db8::2) 56 data bytes ^C --- 2001:db8::2 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2030ms $ sudo ip addr add 2001:db8::1/64 dev lo $ ping 2001:db8::1 PING 2001:db8::1(2001:db8::1) 56 data bytes 64 bytes from 2001:db8::1: icmp_seq=1 ttl=64 time=0.055 ms 64 bytes from 2001:db8::1: icmp_seq=2 ttl=64 time=0.074 ms 64 bytes from 2001:db8::1: icmp_seq=3 ttl=64 time=0.073 ms 64 bytes from 2001:db8::1: icmp_seq=4 ttl=64 time=0.071 ms ^C --- 2001:db8::1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3075ms rtt min/avg/max/mdev = 0.055/0.068/0.074/0.007 ms $ ping 2001:db8::2 PING 2001:db8::2(2001:db8::2) 56 data bytes From 2001:db8::1 icmp_seq=1 Destination unreachable: No route From 2001:db8::1 icmp_seq=2 Destination unreachable: No route From 2001:db8::1 icmp_seq=3 Destination unreachable: No route From 2001:db8::1 icmp_seq=4 Destination unreachable: No route ^C --- 2001:db8::2 ping statistics --- 4 packets transmitted, 0 received, +4 errors, 100% packet loss, time 3070ms ``` Test: integration_test.TestLoopbackAcceptAllInSubnet PiperOrigin-RevId: 329011566
2020-09-09Improve type safety for network protocol optionsGhanan Gowripalan
The existing implementation for NetworkProtocol.{Set}Option take arguments of an empty interface type which all types (implicitly) implement; any type may be passed to the functions. This change introduces marker interfaces for network protocol options that may be set or queried which network protocol option types implement to ensure that invalid types are caught at compile time. Different interfaces are used to allow the compiler to enforce read-only or set-only socket options. PiperOrigin-RevId: 328980359
2020-09-09fix panic when calling SO_ORIGINAL_DST without initializing iptablesKevin Krakauer
Reported-by: syzbot+074ec22c42305725b79f@syzkaller.appspotmail.com PiperOrigin-RevId: 328963899
2020-09-09Use a single NetworkEndpoint per addressGhanan Gowripalan
This change was already done as of https://github.com/google/gvisor/commit/1736b2208f but https://github.com/google/gvisor/commit/a174aa7597 conflicted with that change and it was missed in reviews. This change fixes the conflict. PiperOrigin-RevId: 328920372
2020-09-09Improve type safety for socket optionsGhanan Gowripalan
The existing implementation for {G,S}etSockOpt take arguments of an empty interface type which all types (implicitly) implement; any type may be passed to the functions. This change introduces marker interfaces for socket options that may be set or queried which socket option types implement to ensure that invalid types are caught at compile time. Different interfaces are used to allow the compiler to enforce read-only or set-only socket options. Fixes #3714. RELNOTES: n/a PiperOrigin-RevId: 328832161
2020-09-09Add function to get error from a tcpip.EndpointGhanan Gowripalan
In an upcoming CL, socket option types are made to implement a marker interface with pointer receivers. Since this results in calling methods of an interface with a pointer, we incur an allocation when attempting to get an Endpoint's last error with the current implementation. When calling the method of an interface, the compiler is unable to determine what the interface implementation does with the pointer (since calling a method on an interface uses virtual dispatch at runtime so the compiler does not know what the interface method will do) so it allocates on the heap to be safe incase an implementation continues to hold the pointer after the functioon returns (the reference escapes the scope of the object). In the example below, the compiler does not know what b.foo does with the reference to a it allocates a on the heap as the reference to a may escape the scope of a. ``` var a int var b someInterface b.foo(&a) ``` This change removes the opportunity for that allocation. RELNOTES: n/a PiperOrigin-RevId: 328796559
2020-09-09ip6tables: (de)serialize ip6tables structsKevin Krakauer
More implementation+testing to follow. #3549. PiperOrigin-RevId: 328770160
2020-09-09Use new reference count utility throughout gvisor.Dean Deng
This uses the refs_vfs2 template in vfs2 as well as objects common to vfs1 and vfs2. Note that vfs1-only refcounts are not replaced, since vfs1 will be deleted soon anyway. The following structs now use the new tool, with leak check enabled: devpts:rootInode fuse:inode kernfs:Dentry kernfs:dir kernfs:readonlyDir kernfs:StaticDirectory proc:fdDirInode proc:fdInfoDirInode proc:subtasksInode proc:taskInode proc:tasksInode vfs:FileDescription vfs:MountNamespace vfs:Filesystem sys:dir kernel:FSContext kernel:ProcessGroup kernel:Session shm:Shm mm:aioMappable mm:SpecialMappable transport:queue And the following use the template, but because they currently are not leak checked, a TODO is left instead of enabling leak check in this patch: kernel:FDTable tun:tunEndpoint Updates #1486. PiperOrigin-RevId: 328460377
2020-09-09Only send an ICMP error message if UDP checksum is valid.Toshi Kikuchi
Test: - TestV4UnknownDestination - TestV6UnknownDestination PiperOrigin-RevId: 328424137
2020-09-09Clarify comment on NetworkProtocolNumber.Bhasker Hariharan
The actual values used for this field in Netstack are actually EtherType values of the protocol in an Ethernet frame. Eg. header.IPv4ProtocolNumber is 0x0800 and not the number of the IPv4 Protocol Number itself which is 4. Similarly header.IPv6ProtocolNumber is set to 0x86DD whereas the IPv6 protocol number is 41. See: - https://www.iana.org/assignments/ieee-802-numbers/ieee-802-numbers.xhtml (For EtherType) - https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml (For ProtocolNumbers) PiperOrigin-RevId: 328407293
2020-09-09Add option to replace linkAddrCache with neighborCacheSam Balana
This change adds an option to replace the current implementation of ARP through linkAddrCache, with an implementation of NUD through neighborCache. Switching to using NUD for both ARP and NDP is beneficial for the reasons described by RFC 4861 Section 3.1: "[Using NUD] significantly improves the robustness of packet delivery in the presence of failing routers, partially failing or partitioned links, or nodes that change their link-layer addresses. For instance, mobile nodes can move off-link without losing any connectivity due to stale ARP caches." "Unlike ARP, Neighbor Unreachability Detection detects half-link failures and avoids sending traffic to neighbors with which two-way connectivity is absent." Along with these changes exposes the API for querying and operating the neighbor cache. Operations include: - Create a static entry - List all entries - Delete all entries - Remove an entry by address This also exposes the API to change the NUD protocol constants on a per-NIC basis to allow Neighbor Discovery to operate over links with widely varying performance characteristics. See [RFC 4861 Section 10][1] for the list of constants. Finally, an API for subscribing to NUD state changes is exposed through NUDDispatcher. See [RFC 4861 Appendix C][3] for the list of edges. Tests: pkg/tcpip/network/arp:arp_test + TestDirectRequest pkg/tcpip/network/ipv6:ipv6_test + TestLinkResolution + TestNDPValidation + TestNeighorAdvertisementWithTargetLinkLayerOption + TestNeighorSolicitationResponse + TestNeighorSolicitationWithSourceLinkLayerOption + TestRouterAdvertValidation pkg/tcpip/stack:stack_test + TestCacheWaker + TestForwardingWithFakeResolver + TestForwardingWithFakeResolverManyPackets + TestForwardingWithFakeResolverManyResolutions + TestForwardingWithFakeResolverPartialTimeout + TestForwardingWithFakeResolverTwoPackets + TestIPv6SourceAddressSelectionScopeAndSameAddress [1]: https://tools.ietf.org/html/rfc4861#section-10 [2]: https://tools.ietf.org/html/rfc4861#appendix-C Fixes #1889 Fixes #1894 Fixes #1895 Fixes #1947 Fixes #1948 Fixes #1949 Fixes #1950 PiperOrigin-RevId: 328365034
2020-09-09Support SO_LINGER socket option.Nayana Bidari
When SO_LINGER option is enabled, the close will not return until all the queued messages are sent and acknowledged for the socket or linger timeout is reached. If the option is not set, close will return immediately. This option is mainly supported for connection oriented protocols such as TCP. PiperOrigin-RevId: 328350576
2020-09-09Fix TCP_LINGER2 behavior to match linux.Bhasker Hariharan
We still deviate a bit from linux in how long we will actually wait in FIN-WAIT-2. Linux seems to cap it with TIME_WAIT_LEN and it's not completely obvious as to why it's done that way. For now I think we can ignore that and fix it if it really is an issue. PiperOrigin-RevId: 328324922
2020-09-09Automated rollback of changelist 327325153Ghanan Gowripalan
PiperOrigin-RevId: 328259353
2020-09-09Bump build constraints to 1.17Michael Pratt
This enables pre-release testing with 1.16. The intention is to replace these with a nogo check before the next release. PiperOrigin-RevId: 328193911
2020-09-09Consider loopback bound to all addresses in subnetGhanan Gowripalan
When a loopback interface is configurd with an address and associated subnet, the loopback should treat all addresses in that subnet as an address it owns. This is mimicking linux behaviour as seen below: ``` $ ip addr show dev lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ... link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever $ ping 192.0.2.1 PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data. ^C --- 192.0.2.1 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1018ms $ ping 192.0.2.2 PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data. ^C --- 192.0.2.2 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2039ms $ sudo ip addr add 192.0.2.1/24 dev lo $ ip addr show dev lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ... link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet 192.0.2.1/24 scope global lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever $ ping 192.0.2.1 PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data. 64 bytes from 192.0.2.1: icmp_seq=1 ttl=64 time=0.131 ms 64 bytes from 192.0.2.1: icmp_seq=2 ttl=64 time=0.046 ms 64 bytes from 192.0.2.1: icmp_seq=3 ttl=64 time=0.048 ms ^C --- 192.0.2.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2042ms rtt min/avg/max/mdev = 0.046/0.075/0.131/0.039 ms $ ping 192.0.2.2 PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data. 64 bytes from 192.0.2.2: icmp_seq=1 ttl=64 time=0.131 ms 64 bytes from 192.0.2.2: icmp_seq=2 ttl=64 time=0.069 ms 64 bytes from 192.0.2.2: icmp_seq=3 ttl=64 time=0.049 ms 64 bytes from 192.0.2.2: icmp_seq=4 ttl=64 time=0.035 ms ^C --- 192.0.2.2 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3049ms rtt min/avg/max/mdev = 0.035/0.071/0.131/0.036 ms ``` Test: integration_test.TestLoopbackAcceptAllInSubnet PiperOrigin-RevId: 328188546
2020-09-09Consistent precondition formattingMichael Pratt
Our "Preconditions:" blocks are very useful to determine the input invariants, but they are bit inconsistent throughout the codebase, which makes them harder to read (particularly cases with 5+ conditions in a single paragraph). I've reformatted all of the cases to fit in simple rules: 1. Cases with a single condition are placed on a single line. 2. Cases with multiple conditions are placed in a bulleted list. This format has been added to the style guide. I've also mentioned "Postconditions:", though those are much less frequently used, and all uses already match this style. PiperOrigin-RevId: 327687465
2020-09-09Skip listening TCP ports when trying to bind a free port.Bhasker Hariharan
PiperOrigin-RevId: 327686558
2020-09-09Only use the NextHeader value of the first IPv6 fragment extension header.Arthur Sfez
As per RFC 8200 Section 4.5: The Next Header field of the last header of the Per-Fragment headers is obtained from the Next Header field of the first fragment's Fragment header. Test: - pkg/tcpip/network/ipv6:ipv6_test - pkg/tcpip/network/ipv4:ipv4_test - pkg/tcpip/network/fragmentation:fragmentation_test Updates #2197 PiperOrigin-RevId: 327671635
2020-08-19RACK: Create a new list for segments.Nayana Bidari
RACK requires the segments to be in the order of their transmission or retransmission times. This cl creates a new list and moves the retransmitted segments to the end of the list. PiperOrigin-RevId: 327325153
2020-08-19Remove address range functionsGhanan Gowripalan
Should have been removed in cl/326791119 https://github.com/google/gvisor/commit/9a7b5830aa063895f67ca0fdf653a46906374613 PiperOrigin-RevId: 327074156
2020-08-19Add a unit test for out of order IP reassemblyArthur Sfez
PiperOrigin-RevId: 327042869
2020-08-19Don't support address rangesGhanan Gowripalan
Previously the netstack supported assignment of a range of addresses. This feature is not used so remove it. PiperOrigin-RevId: 326791119
2020-08-19Use a single NetworkEndpoint per NIC per protocolGhanan Gowripalan
The NetworkEndpoint does not need to be created for each address. Most of the work the NetworkEndpoint does is address agnostic. PiperOrigin-RevId: 326759605
2020-08-14Give the ICMP Code its own typeJulian Elischer
This is a preparatory commit for a larger commit working on ICMP generation in error cases. This is removal of technical debt and cleanup in the gvisor code as part of gvisor issue 2211. Updates #2211. PiperOrigin-RevId: 326615389
2020-08-13Use the user supplied MSS for accepted connectionsGhanan Gowripalan
This change supports using the user supplied MSS (TCP_MAXSEG socket option) for new socket connections created from a listening TCP socket. Note that the user supplied MSS will only be used if it is not greater than the maximum possible MSS for a TCP connection's route. If it is greater than the maximum possible MSS, the MSS will be capped at that maximum value. Test: tcp_test.TestUserSuppliedMSSOnListenAccept PiperOrigin-RevId: 326567442
2020-08-13Migrate to PacketHeader API for PacketBuffer.Ting-Yu Wang
Formerly, when a packet is constructed or parsed, all headers are set by the client code. This almost always involved prepending to pk.Header buffer or trimming pk.Data portion. This is known to prone to bugs, due to the complexity and number of the invariants assumed across netstack to maintain. In the new PacketHeader API, client will call Push()/Consume() method to construct/parse an outgoing/incoming packet. All invariants, such as slicing and trimming, are maintained by the API itself. NewPacketBuffer() is introduced to create new PacketBuffer. Zero value is no longer valid. PacketBuffer now assumes the packet is a concatenation of following portions: * LinkHeader * NetworkHeader * TransportHeader * Data Any of them could be empty, or zero-length. PiperOrigin-RevId: 326507688
2020-08-13Ensure TCP TIME-WAIT is not terminated prematurely.Bhasker Hariharan
Netstack's TIME-WAIT state for a TCP socket could be terminated prematurely if the socket entered TIME-WAIT using shutdown(..., SHUT_RDWR) and then was closed using close(). This fixes that bug and updates the tests to verify that Netstack correctly honors TIME-WAIT under such conditions. Fixes #3106 PiperOrigin-RevId: 326456443
2020-08-11Fix-up issue comment.Adin Scannell
PiperOrigin-RevId: 326129258
2020-08-10Set the NetworkProtocolNumber of all PacketBuffers.Kevin Krakauer
NetworkEndpoints set the number on outgoing packets in Write() and NetworkProtocols set them on incoming packets in Parse(). Needed for #3549. PiperOrigin-RevId: 325938745
2020-08-10Populate IPPacketInfo with destination addressGhanan Gowripalan
IPPacketInfo.DestinationAddr should hold the destination of the IP packet, not the source. This change fixes that bug. PiperOrigin-RevId: 325910766
2020-08-08Use unicast source for ICMP echo repliesGhanan Gowripalan
Packets MUST NOT use a non-unicast source address for ICMP Echo Replies. Test: integration_test.TestPingMulticastBroadcast PiperOrigin-RevId: 325634380
2020-08-07Fix panic during Address Resolution of neighbor entry created by NSSam Balana
When a Neighbor Solicitation is received, a neighbor entry is created with the remote host's link layer address, but without a link layer address resolver. If the host decides to send a packet addressed to the IP address of that neighbor entry, Address Resolution starts with a nil pointer to the link layer address resolver. This causes the netstack to panic and crash. This change ensures that when a packet is sent in that situation, the link layer address resolver will be set before Address Resolution begins. Tests: pkg/tcpip/stack:stack_test + TestEntryUnknownToStaleToProbeToReachable - TestNeighborCacheEntryNoLinkAddress Updates #1889 Updates #1894 Updates #1895 Updates #1947 Updates #1948 Updates #1949 Updates #1950 PiperOrigin-RevId: 325516471
2020-08-07tcp: change the limit of TCP_LINGER2Andrei Vagin
It was changed in the Linux kernel: commit f0628c524fd188c3f9418e12478dfdfadacba815 Date: Fri Apr 24 16:06:16 2020 +0800 net: Replace the limit of TCP_LINGER2 with TCP_FIN_TIMEOUT_MAX PiperOrigin-RevId: 325493859
2020-08-06Join IPv4 all-systems group on NIC enableGhanan Gowripalan
Test: - stack_test.TestJoinLeaveMulticastOnNICEnableDisable - integration_test.TestIncomingMulticastAndBroadcast PiperOrigin-RevId: 325185259
2020-08-05Add loss recovery option for TCP.Nayana Bidari
/proc/sys/net/ipv4/tcp_recovery is used to enable RACK loss recovery in TCP. PiperOrigin-RevId: 325157807
2020-08-05Support receiving broadcast IPv4 packetsGhanan Gowripalan
Test: integration_test.TestIncomingSubnetBroadcast PiperOrigin-RevId: 325135617
2020-08-05Prefer RLock over Lock in functions that don't need Lock().Bhasker Hariharan
Updates #231 PiperOrigin-RevId: 325097683
2020-08-04Update variables for implementation of RACK in TCPNayana Bidari
RACK (Recent Acknowledgement) is a new loss detection algorithm in TCP. These are the fields which should be stored on connections to implement RACK algorithm. PiperOrigin-RevId: 324948703
2020-08-04Use 1 fragmentation component per IP stackGhanan Gowripalan
This will help manage memory consumption by IP reassembly when receiving IP fragments on multiple network endpoints. Previously, each endpoint would cap memory consumption at 4MB, but with this change, each IP stack will cap memory consumption at 4MB. No behaviour changes. PiperOrigin-RevId: 324913904
2020-08-03Plumbing context.Context to DecRef() and Release().Nayana Bidari
context is passed to DecRef() and Release() which is needed for SO_LINGER implementation. PiperOrigin-RevId: 324672584
2020-07-31Support fragments from different sourcesGhanan Gowripalan
Prevent fragments with different source-destination pairs from conflicting with each other. Test: - ipv6_test.TestReceiveIPv6Fragments - ipv4_test.TestReceiveIPv6Fragments PiperOrigin-RevId: 324283246
2020-07-31iptables: support SO_ORIGINAL_DSTKevin Krakauer
Envoy (#170) uses this to get the original destination of redirected packets.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 12:40:26 +0000