summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/transport
AgeCommit message (Collapse)Author
2019-12-12Merge release-20191210.0-23-g6fc9f0a (automated)gVisor bot
2019-12-11Add support for TCP_USER_TIMEOUT option.Bhasker Hariharan
The implementation follows the linux behavior where specifying a TCP_USER_TIMEOUT will cause the resend timer to honor the user specified timeout rather than the default rto based timeout. Further it alters when connections are timedout due to keepalive failures. It does not alter the behavior of when keepalives are sent. This is as per the linux behavior. PiperOrigin-RevId: 285099795
2019-12-11Merge release-20191129.0-48-g0d02726 (automated)gVisor bot
2019-12-09Merge release-20191129.0-29-g18af75d (automated)gVisor bot
2019-12-09Add UDP SO_REUSEADDR support to the port manager.Ian Gudger
Next steps include adding support to the transport demuxer and the UDP endpoint. PiperOrigin-RevId: 284652151
2019-12-07Merge release-20191129.0-19-gb1d44be (automated)gVisor bot
2019-12-06Add TCP stats for connection close and keep-alive timeouts.Mithun Iyer
Fix bugs in updates to TCP CurrentEstablished stat. Fixes #1277 PiperOrigin-RevId: 284292459
2019-12-06Merge release-20191129.0-17-g3e84777 (automated)gVisor bot
2019-12-06Fix flakiness in tcp_test.Bhasker Hariharan
This change marks the socket as ESTABLISHED and creates the receiver and sender the moment we send the final ACK in case of an active TCP handshake or when we receive the final ACK for a passive TCP handshake. Before this change there was a short window in which an ACK can be received and processed but the state on the socket is not yet ESTABLISHED. This can be seen in TestConnectBindToDevice which is flaky because sometimes the socket is in SYN-SENT and not ESTABLISHED even though the other side has already received the final ACK of the handshake. PiperOrigin-RevId: 284277713
2019-12-04Merge release-20191114.0-57-gcf7f27c (automated)gVisor bot
2019-12-03net/udp: return a local route address as the bound-to addressAndrei Vagin
If the socket is bound to ANY and connected to a loopback address, getsockname() has to return the loopback address. Without this fix, getsockname() returns ANY. PiperOrigin-RevId: 283647781
2019-12-03Merge release-20191114.0-55-g27e2c4d (automated)gVisor bot
2019-12-03Fix panic due to early transition to Closed.Bhasker Hariharan
The code in rcv.consumeSegment incorrectly transitions to CLOSED state from LAST-ACK before the final ACK for the FIN. Further if receiving a segment changes a socket to a closed state then we should not invoke the sender as the socket is now closed and sending any segments is incorrect. PiperOrigin-RevId: 283625300
2019-11-28Test handling segments on completed but not yet accepted TCP connectionsGhanan Gowripalan
This change does not introduce any new features, or modify existing ones. This change tests handling TCP segments right away for connections that were completed from a listening endpoint. PiperOrigin-RevId: 282986457
2019-11-25Merge release-20191114.0-28-g1641338 (automated)gVisor bot
2019-11-25Set transport and network headers on outbound packets.Kevin Krakauer
These are necessary for iptables to read and parse headers for packet filtering. PiperOrigin-RevId: 282372811
2019-11-23Cleanup visibility.Adin Scannell
PiperOrigin-RevId: 282194656
2019-11-23Merge release-20191114.0-25-gb0a1bbd (automated)gVisor bot
2019-11-22Internal change.Adin Scannell
PiperOrigin-RevId: 282068093
2019-11-22Merge release-20191114.0-23-g8eb6891 (automated)gVisor bot
2019-11-22Store SO_BINDTODEVICE state at bind.Ian Gudger
This allows us to ensure that the correct port reservation is released. Fixes #1217 PiperOrigin-RevId: 282048155
2019-11-22Merge release-20191114.0-22-g9db08c4 (automated)gVisor bot
2019-11-22Use PacketBuffers with GSO.Kevin Krakauer
PiperOrigin-RevId: 282045221
2019-11-22Merge release-20191114.0-21-gf27f38d (automated)gVisor bot
2019-11-22Add segment dequeue check while emptying segment queue.Mithun Iyer
PiperOrigin-RevId: 282023891
2019-11-15Merge release-20191104.0-47-g3e534f2 (automated)gVisor bot
2019-11-15Handle in-flight TCP segments when moving to CLOSE.Mithun Iyer
As we move to CLOSE state from LAST-ACK or TIME-WAIT, ensure that we re-match all in-flight segments to any listening endpoint. Also fix LISTEN state handling of any ACK segments as per RFC793. Fixes #1153 PiperOrigin-RevId: 280703556
2019-11-14Merge release-20191104.0-40-g3f7d937 (automated)gVisor bot
2019-11-14Use PacketBuffers for outgoing packets.Kevin Krakauer
PiperOrigin-RevId: 280455453
2019-11-13Merge release-20191104.0-38-g6dd4c9e (automated)gVisor bot
2019-11-13Fix flaky behaviour during S/R.Bhasker Hariharan
PiperOrigin-RevId: 280280156
2019-11-12Do not handle TCP packets that include a non-unicast IP addressGhanan Gowripalan
This change drops TCP packets with a non-unicast IP address as the source or destination address as TCP is meant for communication between two endpoints. Test: Make sure that if the source or destination address contains a non-unicast address, no TCP packet is sent in response and the packet is dropped. PiperOrigin-RevId: 280073731
2019-11-12Merge release-20190806.1-396-g57a2a5e (automated)gVisor bot
2019-11-12Add tests for SO_REUSEADDR and SO_REUSEPORT.Ian Gudger
* Basic tests for the SO_REUSEADDR and SO_REUSEPORT options. * SO_REUSEADDR functional tests for TCP and UDP. * SO_REUSEADDR and SO_REUSEPORT interaction tests for UDP. * Stubbed support for UDP getsockopt(SO_REUSEADDR). PiperOrigin-RevId: 280049265
2019-11-11Merge release-20190806.1-389-g7730716 (automated)gVisor bot
2019-11-11Make `connect` on socket returned by `accept` correctly error out with EISCONNgVisor bot
PiperOrigin-RevId: 279814493
2019-11-07Merge release-20190806.1-382-g66ebb65 (automated)gVisor bot
2019-11-07Add support for TIME_WAIT timeout.Bhasker Hariharan
This change adds explicit support for honoring the 2MSL timeout for sockets in TIME_WAIT state. It also adds support for the TCP_LINGER2 option that allows modification of the FIN_WAIT2 state timeout duration for a given socket. It also adds an option to modify the Stack wide TIME_WAIT timeout but this is only for testing. On Linux this is fixed at 60s. Further, we also now correctly process RST's in CLOSE_WAIT and close the socket similar to linux without moving it to error state. We also now handle SYN in ESTABLISHED state as per RFC5961#section-4.1. Earlier we would just drop these SYNs. Which can result in some tests that pass on linux to fail on gVisor. Netstack now honors TIME_WAIT correctly as well as handles the following cases correctly. - TCP RSTs in TIME_WAIT are ignored. - A duplicate TCP FIN during TIME_WAIT extends the TIME_WAIT and a dup ACK is sent in response to the FIN as the dup FIN indicates potential loss of the original final ACK. - An out of order segment during TIME_WAIT generates a dup ACK. - A new SYN w/ a sequence number > the highest sequence number in the previous connection closes the TIME_WAIT early and opens a new connection. Further to make the SYN case work correctly the ISN (Initial Sequence Number) generation for Netstack has been updated to be as per RFC. Its not a pure random number anymore and follows the recommendation in https://tools.ietf.org/html/rfc6528#page-3. The current hash used is not a cryptographically secure hash function. A separate change will update the hash function used to Siphash similar to what is used in Linux. PiperOrigin-RevId: 279106406
2019-11-07Merge release-20190806.1-379-g0c424ea (automated)gVisor bot
2019-11-06Rename nicid to nicID to follow go-readability initialismsGhanan Gowripalan
https://github.com/golang/go/wiki/CodeReviewComments#initialisms This change does not introduce any new functionality. It just renames variables from `nicid` to `nicID`. PiperOrigin-RevId: 278992966
2019-11-07Merge release-20190806.1-378-gadb10f4 (automated)gVisor bot
2019-11-06Internal change.gVisor bot
PiperOrigin-RevId: 278979065
2019-11-06Merge release-20190806.1-375-ge1b21f3 (automated)gVisor bot
2019-11-06Use PacketBuffers, rather than VectorisedViews, in netstack.Kevin Krakauer
PacketBuffers are analogous to Linux's sk_buff. They hold all information about a packet, headers, and payload. This is important for: * iptables to access various headers of packets * Preventing the clutter of passing different net and link headers along with VectorisedViews to packet handling functions. This change only affects the incoming packet path, and a future change will change the outgoing path. Benchmark Regular PacketBufferPtr PacketBufferConcrete -------------------------------------------------------------------------------- BM_Recvmsg 400.715MB/s 373.676MB/s 396.276MB/s BM_Sendmsg 361.832MB/s 333.003MB/s 335.571MB/s BM_Recvfrom 453.336MB/s 393.321MB/s 381.650MB/s BM_Sendto 378.052MB/s 372.134MB/s 341.342MB/s BM_SendmsgTCP/0/1k 353.711MB/s 316.216MB/s 322.747MB/s BM_SendmsgTCP/0/2k 600.681MB/s 588.776MB/s 565.050MB/s BM_SendmsgTCP/0/4k 995.301MB/s 888.808MB/s 941.888MB/s BM_SendmsgTCP/0/8k 1.517GB/s 1.274GB/s 1.345GB/s BM_SendmsgTCP/0/16k 1.872GB/s 1.586GB/s 1.698GB/s BM_SendmsgTCP/0/32k 1.017GB/s 1.020GB/s 1.133GB/s BM_SendmsgTCP/0/64k 475.626MB/s 584.587MB/s 627.027MB/s BM_SendmsgTCP/0/128k 416.371MB/s 503.434MB/s 409.850MB/s BM_SendmsgTCP/0/256k 323.449MB/s 449.599MB/s 388.852MB/s BM_SendmsgTCP/0/512k 243.992MB/s 267.676MB/s 314.474MB/s BM_SendmsgTCP/0/1M 95.138MB/s 95.874MB/s 95.417MB/s BM_SendmsgTCP/0/2M 96.261MB/s 94.977MB/s 96.005MB/s BM_SendmsgTCP/0/4M 96.512MB/s 95.978MB/s 95.370MB/s BM_SendmsgTCP/0/8M 95.603MB/s 95.541MB/s 94.935MB/s BM_SendmsgTCP/0/16M 94.598MB/s 94.696MB/s 94.521MB/s BM_SendmsgTCP/0/32M 94.006MB/s 94.671MB/s 94.768MB/s BM_SendmsgTCP/0/64M 94.133MB/s 94.333MB/s 94.746MB/s BM_SendmsgTCP/0/128M 93.615MB/s 93.497MB/s 93.573MB/s BM_SendmsgTCP/0/256M 93.241MB/s 95.100MB/s 93.272MB/s BM_SendmsgTCP/1/1k 303.644MB/s 316.074MB/s 308.430MB/s BM_SendmsgTCP/1/2k 537.093MB/s 584.962MB/s 529.020MB/s BM_SendmsgTCP/1/4k 882.362MB/s 939.087MB/s 892.285MB/s BM_SendmsgTCP/1/8k 1.272GB/s 1.394GB/s 1.296GB/s BM_SendmsgTCP/1/16k 1.802GB/s 2.019GB/s 1.830GB/s BM_SendmsgTCP/1/32k 2.084GB/s 2.173GB/s 2.156GB/s BM_SendmsgTCP/1/64k 2.515GB/s 2.463GB/s 2.473GB/s BM_SendmsgTCP/1/128k 2.811GB/s 3.004GB/s 2.946GB/s BM_SendmsgTCP/1/256k 3.008GB/s 3.159GB/s 3.171GB/s BM_SendmsgTCP/1/512k 2.980GB/s 3.150GB/s 3.126GB/s BM_SendmsgTCP/1/1M 2.165GB/s 2.233GB/s 2.163GB/s BM_SendmsgTCP/1/2M 2.370GB/s 2.219GB/s 2.453GB/s BM_SendmsgTCP/1/4M 2.005GB/s 2.091GB/s 2.214GB/s BM_SendmsgTCP/1/8M 2.111GB/s 2.013GB/s 2.109GB/s BM_SendmsgTCP/1/16M 1.902GB/s 1.868GB/s 1.897GB/s BM_SendmsgTCP/1/32M 1.655GB/s 1.665GB/s 1.635GB/s BM_SendmsgTCP/1/64M 1.575GB/s 1.547GB/s 1.575GB/s BM_SendmsgTCP/1/128M 1.524GB/s 1.584GB/s 1.580GB/s BM_SendmsgTCP/1/256M 1.579GB/s 1.607GB/s 1.593GB/s PiperOrigin-RevId: 278940079
2019-11-06Merge release-20190806.1-374-gd0d89ce (automated)gVisor bot
2019-11-06Send a TCP RST in response to a TCP SYN-ACK on a listening endpointGhanan Gowripalan
This change better follows what is outlined in RFC 793 section 3.4 figure 12 where a listening socket should not accept a SYN-ACK segment in response to a (potentially) old SYN segment. Tests: Test that checks the TCP RST segment sent in response to a TCP SYN-ACK segment received on a listening TCP endpoint. PiperOrigin-RevId: 278893114
2019-10-31Merge release-20190806.1-350-g3246040 (automated)gVisor bot
2019-10-30Deep copy dispatcher views.Kevin Krakauer
When VectorisedViews were passed up the stack from packet_dispatchers, we were passing a sub-slice of the dispatcher's views fields. The dispatchers then immediately set those views to nil. This wasn't caught before because every implementer copied the data in these views before returning. PiperOrigin-RevId: 277615351
2019-10-30Merge release-20190806.1-346-gdb37483 (automated)gVisor bot
2019-10-30Store endpoints inside multiPortEndpoint in a sorted orderAndrei Vagin
It is required to guarantee the same order of endpoints after save/restore. PiperOrigin-RevId: 277598665
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 12:33:28 +0000