summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/transport
AgeCommit message (Collapse)Author
2020-06-12Allow reading IP_MULTICAST_LOOP and IP_MULTICAST_TTL on TCP sockets.Ian Gudger
I am not really sure what the point of this is, but someone filed a bug about it, so I assume something relies on it. PiperOrigin-RevId: 316225127
2020-06-10Add support for SO_REUSEADDR to UDP sockets/endpoints.Ian Gudger
On UDP sockets, SO_REUSEADDR allows multiple sockets to bind to the same address, but only delivers packets to the most recently bound socket. This differs from the behavior of SO_REUSEADDR on TCP sockets. SO_REUSEADDR for TCP sockets will likely need an almost completely independent implementation. SO_REUSEADDR has some odd interactions with the similar SO_REUSEPORT. These interactions are tested fairly extensively and all but one particularly odd one (that honestly seems like a bug) behave the same on gVisor and Linux. PiperOrigin-RevId: 315844832
2020-06-09Fix write hang bug found by syzkaller.gVisor bot
After this change e.mu is only promoted to exclusively locked during route.Resolve. It downgrades back to read-lock afterwards. This prevents the second RLock() call gets stuck later in the stack. https://syzkaller.appspot.com/bug?id=065b893bd8d1d04a4e0a1d53c578537cde1efe99 Syzkaller logs does not contain interesting stack traces. The following stack trace is obtained by running repro locally. goroutine 53 [semacquire, 3 minutes]: runtime.gopark(0xfd4278, 0x1896320, 0xc000301912, 0x4) GOROOT/src/runtime/proc.go:304 +0xe0 fp=0xc0000e25f8 sp=0xc0000e25d8 pc=0x437170 runtime.goparkunlock(...) GOROOT/src/runtime/proc.go:310 runtime.semacquire1(0xc0001220b0, 0xc00000a300, 0x1, 0x0) GOROOT/src/runtime/sema.go:144 +0x1c0 fp=0xc0000e2660 sp=0xc0000e25f8 pc=0x4484e0 sync.runtime_Semacquire(0xc0001220b0) GOROOT/src/runtime/sema.go:56 +0x42 fp=0xc0000e2690 sp=0xc0000e2660 pc=0x448132 gvisor.dev/gvisor/pkg/sync.(*RWMutex).RLock(...) pkg/sync/rwmutex_unsafe.go:76 gvisor.dev/gvisor/pkg/tcpip/transport/udp.(*endpoint).HandleControlPacket(0xc000122000, 0x7ee5, 0xc00053c16c, 0x4, 0x5e21, 0xc00053c224, 0x4, 0x1, 0x0, 0xc00007ed00) pkg/tcpip/transport/udp/endpoint.go:1345 +0x169 fp=0xc0000e26d8 sp=0xc0000e2690 pc=0x9843f9 ...... gvisor.dev/gvisor/pkg/tcpip/transport/udp.(*protocol).HandleUnknownDestinationPacket(0x18bb5a0, 0xc000556540, 0x5e21, 0xc00053c16c, 0x4, 0x7ee5, 0xc00053c1ec, 0x4, 0xc00007e680, 0x4) pkg/tcpip/transport/udp/protocol.go:143 +0xb9a fp=0xc0000e8260 sp=0xc0000e7510 pc=0x9859ba ...... gvisor.dev/gvisor/pkg/tcpip/transport/udp.sendUDP(0xc0001220d0, 0xc00053ece0, 0x1, 0x1, 0x883, 0x1405e217ee5, 0x11100a0, 0xc000592000, 0xf88780) pkg/tcpip/transport/udp/endpoint.go:924 +0x3b0 fp=0xc0000ed390 sp=0xc0000ec750 pc=0x981af0 gvisor.dev/gvisor/pkg/tcpip/transport/udp.(*endpoint).write(0xc000122000, 0x11104e0, 0xc00020a460, 0x0, 0x0, 0x0, 0x0, 0x0) pkg/tcpip/transport/udp/endpoint.go:510 +0x4ad fp=0xc0000ed658 sp=0xc0000ed390 pc=0x97f2dd PiperOrigin-RevId: 315590041
2020-06-07netstack: parse incoming packet headers up-frontKevin Krakauer
Netstack has traditionally parsed headers on-demand as a packet moves up the stack. This is conceptually simple and convenient, but incompatible with iptables, where headers can be inspected and mangled before even a routing decision is made. This changes header parsing to happen early in the incoming packet path, as soon as the NIC gets the packet from a link endpoint. Even if an invalid packet is found (e.g. a TCP header of insufficient length), the packet is passed up the stack for proper stats bookkeeping. PiperOrigin-RevId: 315179302
2020-06-05Drop flaky tag.Adin Scannell
PiperOrigin-RevId: 315018295
2020-06-05Centralize the categories of endpoint states.Rahat Mahmood
PiperOrigin-RevId: 314996457
2020-06-05Fix error code returned due to Port exhaustion.Bhasker Hariharan
For TCP sockets gVisor incorrectly returns EAGAIN when no ephemeral ports are available to bind during a connect. Linux returns EADDRNOTAVAIL. This change fixes gVisor to return the correct code and adds a test for the same. This change also fixes a minor bug for ping sockets where connect() would fail with EINVAL unless the socket was bound first. Also added tests for testing UDP Port exhaustion and Ping socket port exhaustion. PiperOrigin-RevId: 314988525
2020-06-05Fix copylocks error about copying IPTables.Ting-Yu Wang
IPTables.connections contains a sync.RWMutex. Copying it will trigger copylocks analysis. Tested by manually enabling nogo tests. sync.RWMutex is added to IPTables for the additional race condition discovered. PiperOrigin-RevId: 314817019
2020-06-05Handle TCP segment split cases as per MSS.Mithun Iyer
- Always split segments larger than MSS. Currently, we base the segment split decision as a function of the send congestion window and MSS, which could be greater than the MSS advertised by remote. - While splitting segments, ensure the PSH flag is reset when there are segments that are queued to be sent. - With TCP_CORK, hold up segments up until MSS. Fix a bug in computing available send space before attempting to coalesce segments. Fixes #2832 PiperOrigin-RevId: 314802928
2020-06-03Pass PacketBuffer as pointer.Ting-Yu Wang
Historically we've been passing PacketBuffer by shallow copying through out the stack. Right now, this is only correct as the caller would not use PacketBuffer after passing into the next layer in netstack. With new buffer management effort in gVisor/netstack, PacketBuffer will own a Buffer (to be added). Internally, both PacketBuffer and Buffer may have pointers and shallow copying shouldn't be used. Updates #2404. PiperOrigin-RevId: 314610879
2020-06-03Avoid TCP segment split when out of sender window.Mithun Iyer
If the entire segment cannot be accommodated in the receiver advertised window and if there are still unacknowledged pending segments, skip splitting the segment. The segment transmit would get retried by the retransmit handler. PiperOrigin-RevId: 314538523
2020-05-29Move TCP to CLOSED from SYN-RCVD on RST.Mithun Iyer
RST handling is broken when the TCP state transitions from SYN-SENT to SYN-RCVD in case of simultaneous open. An incoming RST should trigger cleanup of the endpoint. RFC793, section 3.9, page 70. Fixes #2814 PiperOrigin-RevId: 313828777
2020-05-20Internal change.gVisor bot
PiperOrigin-RevId: 312559963
2020-05-15Minor formatting updates for gvisor.dev.Adin Scannell
* Aggregate architecture Overview in "What is gVisor?" as it makes more sense in one place. * Drop "user-space kernel" and use "application kernel". The term "user-space kernel" is confusing when some platform implementation do not run in user-space (instead running in guest ring zero). * Clear up the relationship between the Platform page in the user guide and the Platform page in the architecture guide, and ensure they are cross-linked. * Restore the call-to-action quick start link in the main page, and drop the GitHub link (which also appears in the top-right). * Improve image formatting by centering all doc and blog images, and move the image captions to the alt text. PiperOrigin-RevId: 311845158
2020-05-13Fix TCP segment retransmit timeout handling.Mithun Iyer
As per RFC 1122 and Linux retransmit timeout handling: - The segment retransmit timeout needs to exponentially increase and cap at a predefined value. - TCP connection needs to timeout after a predefined number of segment retransmissions. - TCP connection should not timeout when the retranmission timeout exceeds MaxRTO, predefined upper bound. Fixes #2673 PiperOrigin-RevId: 311463961
2020-05-13Stub support for TCP_SYNCNT and TCP_WINDOW_CLAMP.Bhasker Hariharan
This change adds support for TCP_SYNCNT and TCP_WINDOW_CLAMP options in GetSockOpt/SetSockOpt. This change does not really change any behaviour in Netstack and only stores/returns the stored value. Actual honoring of these options will be added as required. Fixes #2626, #2625 PiperOrigin-RevId: 311453777
2020-05-08Send ACK to OTW SEQs/unacc ACKs in CLOSE_WAITZeling Feng
This fixed the corresponding packetimpact test. PiperOrigin-RevId: 310593470
2020-05-07Capture range variable in parallel subtestsSam Balana
Only the last test was running before since the goroutines won't be executed until after this loop. I added t.Log(test.name) and this is was the result: TestListenNoAcceptNonUnicastV4/SourceUnspecified: DestOtherMulticast TestListenNoAcceptNonUnicastV4/DestUnspecified: DestOtherMulticast TestListenNoAcceptNonUnicastV4/DestOtherMulticast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/SourceBroadcast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/DestOurMulticast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/DestBroadcast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/SourceOtherMulticast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/SourceOurMulticast: DestOtherMulticast https://github.com/golang/go/wiki/TableDrivenTests#parallel-testing PiperOrigin-RevId: 310440629
2020-05-07Fix bugs in SACK recovery.Bhasker Hariharan
Every call to sender.NextSeg does not need to iterate from the front of the writeList as in a given recovery episode we can cache the last nextSeg returned. There cannot be a lower sequenced segment that matches the next call to NextSeg as otherwise we would have returned that instead in the previous call. This fixes the issue of excessive CPU usage w/ large send buffers where we spend a lot of time iterating from the front of the list on every NextSeg invocation. Further the following other bugs were also fixed: * Iteration of segments never sent in NextSeg() when looking for segments for retransmission that match step1/3/4 of the NextSeg algorithm * Correctly setting rescueRxt only if the rescue segment was actually sent. * Correctly initializing rescueRxt/highRxt when entering SACK recovery. * Correctly re-arming the timer only on retransmissions when SACK is in use and not for every segment being sent as it was being done before. * Copy over xmitTime and xmitCount on segment clone. * Move writeNext along when skipping over SACKED segments. This is required to prevent spurious retransmissions where we end up retransmitting data that was never lost. PiperOrigin-RevId: 310387671
2020-05-05Support TCP zero window probes.Mithun Iyer
As per RFC 1122 4.2.2.17, when the remote advertizes zero receive window, the sender needs to probe for the window-size to become non-zero starting from the next retransmission interval. The TCP connection needs to be kept open as long as the remote is acknowledging the zero window probes. We reuse the retransmission timers to support this. Fixes #1644 PiperOrigin-RevId: 310021575
2020-05-01Support for connection tracking of TCP packets.Nayana Bidari
Connection tracking is used to track packets in prerouting and output hooks of iptables. The NAT rules modify the tuples in connections. The connection tracking code modifies the packets by looking at the modified tuples.
2020-05-01Automated rollback of changelist 308674219Kevin Krakauer
PiperOrigin-RevId: 309491861
2020-04-30FIFO QDisc implementationBhasker Hariharan
Updates #231 PiperOrigin-RevId: 309323808
2020-04-27Reduce flakiness in tcp_test.Bhasker Hariharan
Poll for metric updates as immediately trying to read them can sometimes be flaky if due to goroutine scheduling the check happens before the sender has got a chance to update the corresponding sent metric. PiperOrigin-RevId: 308712817
2020-04-27Automated rollback of changelist 308163542gVisor bot
PiperOrigin-RevId: 308674219
2020-04-23Remove View.First() and View.RemoveFirst()Kevin Krakauer
These methods let users eaily break the VectorisedView abstraction, and allowed netstack to slip into pseudo-enforcement of the "all headers are in the first View" invariant. Removing them and replacing with PullUp(n) breaks this reliance and will make it easier to add iptables support and rework network buffer management. The new View.PullUp(n) method is low cost in the common case, when when all the headers fit in the first View. PiperOrigin-RevId: 308163542
2020-04-23Simplify Docker test infrastructure.Adin Scannell
This change adds a layer of abstraction around the internal Docker APIs, and eliminates all direct dependencies on Dockerfiles in the infrastructure. A subsequent change will automated the generation of local images (with efficient caching). Note that this change drops the use of bazel container rules, as that experiment does not seem to be viable. PiperOrigin-RevId: 308095430
2020-04-22tcp: handle listen after shutdown properlyAndrei Vagin
Right now, sentry panics in this case: panic: close of nil channel goroutine 67 [running]: pkg/tcpip/transport/tcp/tcp.(*endpoint).listen(0xc0000ce000, 0x9, 0x0) pkg/tcpip/transport/tcp/endpoint.go:2208 +0x170 pkg/tcpip/transport/tcp/tcp.(*endpoint).Listen(0xc0000ce000, 0x9, 0xc0003a1ad0) pkg/tcpip/transport/tcp/endpoint.go:2179 +0x50 Fixes #2468 PiperOrigin-RevId: 307896725
2020-04-21Automated rollback of changelist 307477185gVisor bot
PiperOrigin-RevId: 307598974
2020-04-20Merge pull request #2313 from kevinGC:firstngVisor bot
PiperOrigin-RevId: 307477185
2020-04-19Don't accept segments outside the receive windowEyal Soha
Fixed to match RFC 793 page 69. Fixes #1607 PiperOrigin-RevId: 307334892
2020-04-17Remove View.First() and View.RemoveFirst()Kevin Krakauer
These methods let users eaily break the VectorisedView abstraction, and allowed netstack to slip into pseudo-enforcement of the "all headers are in the first View" invariant. Removing them and replacing with PullUp(n) breaks this reliance and will make it easier to add iptables support and rework network buffer management. The new View.PullUp(n) method is low cost in the common case, when when all the headers fit in the first View.
2020-04-17Permit setting unknown optionsTamir Duberstein
This previously changed in 305699233, but this behaviour turned out to be load bearing. PiperOrigin-RevId: 307033802
2020-04-16Reset pending connections on listener shutdown.Mithun Iyer
When the listening socket is read shutdown, we need to reset all pending and incoming connections. Ensure that the endpoint is not cleaned up from the demuxer and subsequent bind to same port does not go through. PiperOrigin-RevId: 306958038
2020-04-16Fix data race in tcp_test.Bhasker Hariharan
This change makes SynRcvdCountThreshold and the global synRcvdCount into a stack configurable value. This is required because in cases like mod_proxy which create multiple Stack instances the count will be a global value that impacts all Stack instances. Further the tests relied on modifying the global threshold to simulate tests where we want to verify SYN cookie based behaviour. This lead to data races due to the global being modified/read without locks or atomics. PiperOrigin-RevId: 306947723
2020-04-15Remove unnecessary codeTamir Duberstein
Remove useless casts and duplicate return statements. PiperOrigin-RevId: 306627916
2020-04-15Reset pending connections on listener closeMithun Iyer
Attempt to redeliver TCP segments that are enqueued into a closing TCP endpoint. This was being done for Established endpoints but not for those that are listening or performing connection handshake. Fixes #2417 PiperOrigin-RevId: 306598155
2020-04-14Reduce flakiness in tcp_test.Bhasker Hariharan
Tests now use a MinRTO of 3s instead of default 200ms. This reduced flakiness in a lot of the congestion control/recovery tests which were flaky due to retransmit timer firing too early in case the test executors were overloaded. This change also bumps some of the timeouts in tests which were too sensitive to timer variations and reduces the number of slow start iterations which can make the tests run for too long and also trigger retansmit timeouts etc if the executor is overloaded. PiperOrigin-RevId: 306562645
2020-04-09Merge pull request #2253 from amscanne:nogogVisor bot
PiperOrigin-RevId: 305807868
2020-04-09Convert int and bool socket options to use GetSockOptInt and GetSockOptBoolAndrei Vagin
PiperOrigin-RevId: 305699233
2020-04-08Remove lostcancel warnings.Adin Scannell
Updates #2243
2020-04-08Fix all printf formatting errors.Adin Scannell
Updates #2243
2020-04-03Refactor software GSO code.Bhasker Hariharan
Software GSO implementation currently has a complicated code path with implicit assumptions that all packets to WritePackets carry same Data and it does this to avoid allocations on the path etc. But this makes it hard to reuse the WritePackets API. This change breaks all such assumptions by introducing a new Vectorised View API ReadToVV which can be used to cleanly split a VV into multiple independent VVs. Further this change also makes packet buffers linkable to form an intrusive list. This allows us to get rid of the array of packet buffers that are passed in the WritePackets API call and replace it with a list of packet buffers. While this code does introduce some more allocations in the benchmarks it doesn't cause any degradation. Updates #231 PiperOrigin-RevId: 304731742
2020-03-26Support owner matching for iptables.Nayana Bidari
This feature will match UID and GID of the packet creator, for locally generated packets. This match is only valid in the OUTPUT and POSTROUTING chains. Forwarded packets do not have any socket associated with them. Packets from kernel threads do have a socket, but usually no owner.
2020-03-25Fix data-race in endpoint.ReadinessBhasker Hariharan
PiperOrigin-RevId: 302924789
2020-03-24Add support for setting TCP segment hash.Bhasker Hariharan
This allows the link layer endpoints to consistenly hash a TCP segment to a single underlying queue in case a link layer endpoint does support multiple underlying queues. Updates #231 PiperOrigin-RevId: 302760664
2020-03-24Move tcpip.PacketBuffer and IPTables to stack package.Bhasker Hariharan
This is a precursor to be being able to build an intrusive list of PacketBuffers for use in queuing disciplines being implemented. Updates #2214 PiperOrigin-RevId: 302677662
2020-03-20Remove unused variable `sndNxtList`.Ting-Yu Wang
PiperOrigin-RevId: 302110328
2020-03-19Remove redundant dep in BUILDJay Zhuang
PiperOrigin-RevId: 301859066
2020-03-19Address comments on workMu removal change.Bhasker Hariharan
Updates #231, #357 PiperOrigin-RevId: 301833669
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 05:33:02 +0000