Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 305807868
|
|
PiperOrigin-RevId: 305699233
|
|
Updates #2243
|
|
Updates #2243
|
|
Software GSO implementation currently has a complicated code path with
implicit assumptions that all packets to WritePackets carry same Data
and it does this to avoid allocations on the path etc. But this makes it
hard to reuse the WritePackets API.
This change breaks all such assumptions by introducing a new Vectorised
View API ReadToVV which can be used to cleanly split a VV into multiple
independent VVs. Further this change also makes packet buffers linkable
to form an intrusive list. This allows us to get rid of the array of
packet buffers that are passed in the WritePackets API call and replace
it with a list of packet buffers.
While this code does introduce some more allocations in the benchmarks
it doesn't cause any degradation.
Updates #231
PiperOrigin-RevId: 304731742
|
|
This feature will match UID and GID of the packet creator, for locally
generated packets. This match is only valid in the OUTPUT and POSTROUTING
chains. Forwarded packets do not have any socket associated with them.
Packets from kernel threads do have a socket, but usually no owner.
|
|
PiperOrigin-RevId: 302924789
|
|
This allows the link layer endpoints to consistenly hash a TCP
segment to a single underlying queue in case a link layer endpoint
does support multiple underlying queues.
Updates #231
PiperOrigin-RevId: 302760664
|
|
This is a precursor to be being able to build an intrusive list
of PacketBuffers for use in queuing disciplines being implemented.
Updates #2214
PiperOrigin-RevId: 302677662
|
|
PiperOrigin-RevId: 302110328
|
|
PiperOrigin-RevId: 301859066
|
|
Updates #231, #357
PiperOrigin-RevId: 301833669
|
|
workMu is removed and e.mu is now a mutex that supports TryLock. The packet
processing path tries to lock the mutex and if its locked it will just queue the
packet and move on. The endpoint.UnlockUser() will process any backlog of
packets before unlocking the socket.
This simplifies the locking inside tcp endpoints a lot. Further the
endpoint.LockUser() implements spinning as long as the lock is not held by
another syscall goroutine. This ensures low latency as not spinning leads to the
task thread being put to sleep if the lock is held by the packet dispatch
path. This is suboptimal as the lower layer rarely holds the lock for long so
implementing spinning here helps.
If the lock is held by another task goroutine then we just proceed to call
LockUser() and the task could be put to sleep.
The protocol goroutines themselves just call e.mu.Lock() and block if the
lock is currently not available.
Updates #231, #357
PiperOrigin-RevId: 301808349
|
|
This will aid in segment reordering detection.
Updates #691
PiperOrigin-RevId: 301692638
|
|
PiperOrigin-RevId: 300467253
|
|
Atomically close the endpoint. Before this change, it was possible for
multiple callers to perform duplicate work.
PiperOrigin-RevId: 300462110
|
|
Endpoints which were being terminated in an ERROR state or were moved to CLOSED
by the worker goroutine do not run cleanupLocked() as that should already be run
by the worker termination. But when making that change we made the mistake of
not removing the endpoint from the danglingEndpoints which is normally done in
cleanupLocked().
As a result these endpoints are leaked since a reference is held to them in the
danglingEndpoints array forever till Stack is torn down.
PiperOrigin-RevId: 300438426
|
|
From RFC 793 s3.9 p61 Event Processing:
CLOSE Call during TIME-WAIT: return with "error: connection closing"
Fixes #1603
PiperOrigin-RevId: 299401353
|
|
By putting slices into the pool, the slice header escapes. This can be avoided
by not putting the slice header into the pool.
This removes an allocation from the TCP segment send path.
PiperOrigin-RevId: 299215480
|
|
Properly discard segments from the segment heap.
PiperOrigin-RevId: 298704074
|
|
Ensures that all access to TransportEndpointInfo.ID is either:
* In a function ending in a Locked suffix.
* While holding the appropriate mutex.
This primary affects the checkV4Mapped method on affected endpoints, which has
been renamed to checkV4MappedLocked. Also document the method and change its
argument to be a value instead of a pointer which had caused some awkwardness.
This race was possible in the udp and icmp endpoints between Connect and uses
of TransportEndpointInfo.ID including in both itself and Bind.
The tcp endpoint did not suffer from this bug, but benefited from better
documentation.
Updates #357
PiperOrigin-RevId: 298682913
|
|
PiperOrigin-RevId: 298451319
|
|
Call stack.Close on stacks when we are done with them in tcp_test. This avoids
leaking resources and reduces the test's flakiness when race/gotsan is enabled.
It also provides test coverage for the race also fixed in this change, which
can be reliably triggered with the stack.Close change (and without the other
changes) when race/gotsan is enabled.
The race was possible when calling Abort (via stack.Close) on an endpoint
processing a SYN segment as part of a passive connect.
Updates #1564
PiperOrigin-RevId: 297685432
|
|
PiperOrigin-RevId: 297638665
|
|
TestCurrentConnectedIncrement fails consistently under gotsan due to the sleep
to check metrics is exactly the same as the TIME-WAIT duration. Under gotsan
things can be slow enough that the increment test is done before the protocol
goroutine is run after the TIME-WAIT timer expires and does its cleanup.
Increasing the sleep from 1s to 1.2s makes the test pass consistently.
PiperOrigin-RevId: 297160181
|
|
Protocol dispatchers were previously leaked. Bypassing TIME_WAIT is required to
test this change.
Also fix a race when a socket in SYN-RCVD is closed. This is also required to
test this change.
PiperOrigin-RevId: 296922548
|
|
Added the ability to get/set the IP_RECVTCLASS socket option on UDP endpoints.
If enabled, traffic class from the incoming Network Header passed as ancillary
data in the ControlMessages.
Adding Get/SetSockOptBool to decrease the overhead of getting/setting simple
options. (This was absorbed in a CL that will be landing before this one).
Test:
* Added unit test to udp_test.go that tests getting/setting as well as
verifying that we receive expected TOS from incoming packet.
* Added a syscall test for verifying getting/setting
* Removed test skip for existing syscall test to enable end to end test.
PiperOrigin-RevId: 295840218
|
|
PiperOrigin-RevId: 294952610
|
|
These were out-of-band notes that can help provide additional context
and simplify automated imports.
PiperOrigin-RevId: 293525915
|
|
From RFC 793 s3.9 p58 Event Processing:
If RECEIVE Call arrives in CLOSED state and the user has access to such a
connection, the return should be "error: connection does not exist"
Fixes #1598
PiperOrigin-RevId: 293494287
|
|
Tests 65k connection attempts on common types of sockets to check for port
leaks.
Also fixes a bug where dual-stack sockets wouldn't properly re-queue
segments received while closing.
PiperOrigin-RevId: 293241166
|
|
PiperOrigin-RevId: 292624867
|
|
As per RFC 2464 section 7, an IPv6 packet with a multicast destination
address is transmitted to the mapped Ethernet multicast address.
Test:
- ipv6.TestLinkResolution
- stack_test.TestDADResolve
- stack_test.TestRouterSolicitation
PiperOrigin-RevId: 292610529
|
|
When sending a RST on shutdown we need to double check the
state after acquiring the work mutex as the endpoint could
have transitioned out of a connected state from the time
we checked it and we acquired the workMutex.
I added two tests but sadly neither reproduce the panic. I am
going to leave the tests in as they are good to have anyway.
PiperOrigin-RevId: 292393800
|
|
PiperOrigin-RevId: 292233574
|
|
This is to aid later implementation for /dev/net/tun device.
PiperOrigin-RevId: 291746025
|
|
PiperOrigin-RevId: 291745021
|
|
Such a stat accounts for all connections that are currently
established and not yet transitioned to close state.
Also fix bug in double increment of CurrentEstablished stat.
Fixes #1579
PiperOrigin-RevId: 290827365
|
|
PiperOrigin-RevId: 290793754
|
|
CERT Advisory CA-96.21 III. Solution advises that devices drop packets which
could not have correctly arrived on the wire, such as receiving a packet where
the source IP address is owned by the device that sent it.
Fixes #1507
PiperOrigin-RevId: 290378240
|
|
The change to introduce worker goroutines can cause the endpoint
to transition to StateError and we should terminate the loop rather
than let the endpoint transition to a CLOSED state as we do
in case the endpoint enters TIME-WAIT/CLOSED. Moving to a closed
state would cause the actual error to not be propagated to
any read() calls etc.
PiperOrigin-RevId: 289923568
|
|
All inbound segments for connections in ESTABLISHED state are delivered to the
endpoint's queue but for every segment delivered we also queue the endpoint for
processing to a selected processor. This ensures that when there are a large
number of connections in ESTABLISHED state the inbound packets are all handled
by a small number of goroutines and significantly reduces the amount of work the
goscheduler has to perform.
We let connections in other states follow the current path where the
endpoint's goroutine directly handles the segments.
Updates #231
PiperOrigin-RevId: 289728325
|
|
PiperOrigin-RevId: 289718534
|
|
|
|
Fixes #1490
Fixes #1495
PiperOrigin-RevId: 289523250
|
|
This is a band-aid fix for now to prevent panics.
PiperOrigin-RevId: 289078453
|
|
* Rename syncutil to sync.
* Add aliases to sync types.
* Replace existing usage of standard library sync package.
This will make it easier to swap out synchronization primitives. For example,
this will allow us to use primitives from github.com/sasha-s/go-deadlock to
check for lock ordering violations.
Updates #1472
PiperOrigin-RevId: 289033387
|
|
PiperOrigin-RevId: 289019953
|
|
This makes it possible to call the sockopt from go even when the NIC has no
name.
PiperOrigin-RevId: 288955236
|
|
...and port V6OnlyOption to it.
PiperOrigin-RevId: 288789451
|