summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/transport
AgeCommit message (Collapse)Author
2020-07-23Add AfterFunc to tcpip.ClockSam Balana
Changes the API of tcpip.Clock to also provide a method for scheduling and rescheduling work after a specified duration. This change also implements the AfterFunc method for existing implementations of tcpip.Clock. This is the groundwork required to mock time within tests. All references to CancellableTimer has been replaced with the tcpip.Job interface, allowing for custom implementations of scheduling work. This is a BREAKING CHANGE for clients that implement their own tcpip.Clock or use tcpip.CancellableTimer. Migration plan: 1. Add AfterFunc(d, f) to tcpip.Clock 2. Replace references of tcpip.CancellableTimer with tcpip.Job 3. Replace calls to tcpip.CancellableTimer#StopLocked with tcpip.Job#Cancel 4. Replace calls to tcpip.CancellableTimer#Reset with tcpip.Job#Schedule 5. Replace calls to tcpip.NewCancellableTimer with tcpip.NewJob. PiperOrigin-RevId: 322906897
2020-07-23Merge pull request #3207 from kevinGC:icmp-connectgVisor bot
PiperOrigin-RevId: 322853192
2020-07-23Fix wildcard bind for raw socket.Bhasker Hariharan
Fixes #3334 PiperOrigin-RevId: 322846384
2020-07-22make connect(2) fail when dest is unreachableKevin Krakauer
Previously, ICMP destination unreachable datagrams were ignored by TCP endpoints. This caused connect to hang when an intermediate router couldn't find a route to the host. This manifested as a Kokoro error when Docker IPv6 was enabled. The Ruby image test would try to install the sinatra gem and hang indefinitely attempting to use an IPv6 address. Fixes #3079.
2020-07-22Support for receiving outbound packets in AF_PACKET.Bhasker Hariharan
Updates #173 PiperOrigin-RevId: 322665518
2020-07-16Add support to return protocol in recvmsg for AF_PACKET.Bhasker Hariharan
Updates #173 PiperOrigin-RevId: 321690756
2020-07-15Add support for SO_ERROR to packet sockets.Bhasker Hariharan
Packet sockets also seem to allow double binding and do not return an error on linux. This was tested by running the syscall test in a linux namespace as root and the current test DoubleBind fails@HEAD. Passes after this change. Updates #173 PiperOrigin-RevId: 321445137
2020-07-13garbage collect connectionsKevin Krakauer
As in Linux, we must periodically clean up unused connections. PiperOrigin-RevId: 321003353
2020-07-11Stub out SO_DETACH_FILTER.Bhasker Hariharan
Updates #2746 PiperOrigin-RevId: 320757963
2020-07-09Discard multicast UDP source address.gVisor bot
RFC-1122 (and others) specify that UDP should not receive datagrams that have a source address that is a multicast address. Packets should never be received FROM a multicast address. See also, RFC 768: 'User Datagram Protocol' J. Postel, ISI, 28 August 1980 A UDP datagram received with an invalid IP source address (e.g., a broadcast or multicast address) must be discarded by UDP or by the IP layer (see rfc 1122 Section 3.2.1.3). This CL does not address TCP or broadcast which is more complicated. Also adds a test for both ipv6 and ipv4 UDP. Fixes #3154 PiperOrigin-RevId: 320547674
2020-07-09Add support for IP_HDRINCL IP option for raw sockets.Bhasker Hariharan
Updates #2746 Fixes #3158 PiperOrigin-RevId: 320497190
2020-07-08Avoid accidental zero-checksumTamir Duberstein
PiperOrigin-RevId: 320250773
2020-07-07Set IPv4 ID on all non-atomic datagramsTony Gong
RFC 6864 imposes various restrictions on the uniqueness of the IPv4 Identification field for non-atomic datagrams, defined as an IP datagram that either can be fragmented (DF=0) or is already a fragment (MF=1 or positive fragment offset). In order to be compliant, the ID field is assigned for all non-atomic datagrams. Add a TCP unit test that induces retransmissions and checks that the IPv4 ID field is unique every time. Add basic handling of the IP_MTU_DISCOVER socket option so that the option can be used to disable PMTU discovery, effectively setting DF=0. Attempting to set the sockopt to anything other than disabled will fail because PMTU discovery is currently not implemented, and the default behavior matches that of disabled. PiperOrigin-RevId: 320081842
2020-07-07icmp: When setting TransportHeader, remove from the Data portion.Ting-Yu Wang
The current convention is when a header is set to pkt.XxxHeader field, it gets removed from pkt.Data. ICMP does not currently follow this convention. PiperOrigin-RevId: 320078606
2020-07-06Add support for SO_RCVBUF/SO_SNDBUF for AF_PACKET sockets.Bhasker Hariharan
Updates #2746 PiperOrigin-RevId: 319887810
2020-07-06Shard some slow tests.Ting-Yu Wang
stack_x_test: 2m -> 20s tcp_x_test: 80s -> 25s PiperOrigin-RevId: 319828101
2020-07-06Remove dependency on pkg/binaryTamir Duberstein
PiperOrigin-RevId: 319770124
2020-07-05Add wakers synchronouslyTamir Duberstein
Avoid a race where an arbitrary goroutine scheduling delay can cause the processor to miss events and hang indefinitely. Reduce allocations by storing processors by-value in the dispatcher, and by using a single WaitGroup rather than one per processor. PiperOrigin-RevId: 319665861
2020-07-01TCP receive should block when in SYN-SENT state.Mithun Iyer
The application can choose to initiate a non-blocking connect and later block on a read, when the endpoint is still in SYN-SENT state. PiperOrigin-RevId: 319311016
2020-06-30Fix two bugs in TCP sender.Bhasker Hariharan
a) When GSO is in use we should not cap the segment to maxPayloadSize in sender.maybeSendSegment as the GSO logic will cap the segment to the correct size. Without this the host GSO is not used as we end up breaking up large segments into small MSS sized segments before writing the packets to the host. b) The check to not split a segment due to it not fitting in the receiver window when there are pending segments is incorrect as segments in writeList can be really large as we just take the write call's buffer size and create a single large segment. So a write of say 128KB will just be 1 segment in the writeList. The linux code checks if 1 MSS sized segments fits in the receiver's window and if not then does not split the current segment. gVisor's check was incorrect that it was checking if the whole segment which could be >>> 1 MSS would fit in the receiver's window. This was causing us to prematurely stop sending and falling back to retransmit timer/probe from the other end to send data. This was seen when running HTTPD benchmarks where @ HEAD when sending large files the benchmark was taking forever to run. The tcp_splitseg_mss_test.go is being deleted as the test as written doesn't test what is intended correctly. This is because GSO is enabled by default and the reason the MSS+1 sized segment is sent is because GSO is in use. A proper test will require disabling GSO on linux and netstack which is going to take a bit of work in packetimpact to do it correctly. Separately a new test probably should be written that verifies that a segment > availableWindow is not split if the availableWindow is < 1 MSS. Fixes #3107 PiperOrigin-RevId: 319172089
2020-06-30Avoid multiple atomic loadsTamir Duberstein
...by calling (*tcp.endpoint).EndpointState only once when possible. Avoid wrapping (*sleep.Waker).Assert in a useless func while I'm here. PiperOrigin-RevId: 319074149
2020-06-26IPv6 raw sockets. Needed for ip6tables.Kevin Krakauer
IPv6 raw sockets never include the IPv6 header. PiperOrigin-RevId: 318582989
2020-06-26Implement SO_NO_CHECK socket option.gVisor bot
SO_NO_CHECK is used to skip the UDP checksum generation on a TX socket (UDP checksum is optional on IPv4). Test: - TestNoChecksum - SoNoCheckOffByDefault (UdpSocketTest) - SoNoCheck (UdpSocketTest) Fixes #3055 PiperOrigin-RevId: 318575215
2020-06-24Add support for Stack level options.Bhasker Hariharan
Linux controls socket send/receive buffers using a few sysctl variables - net.core.rmem_default - net.core.rmem_max - net.core.wmem_max - net.core.wmem_default - net.ipv4.tcp_rmem - net.ipv4.tcp_wmem The first 4 control the default socket buffer sizes for all sockets raw/packet/tcp/udp and also the maximum permitted socket buffer that can be specified in setsockopt(SOL_SOCKET, SO_(RCV|SND)BUF,...). The last two control the TCP auto-tuning limits and override the default specified in rmem_default/wmem_default as well as the max limits. Netstack today only implements tcp_rmem/tcp_wmem and incorrectly uses it to limit the maximum size in setsockopt() as well as uses it for raw/udp sockets. This changelist introduces the other 4 and updates the udp/raw sockets to use the newly introduced variables. The values for min/max match the current tcp_rmem/wmem values and the default value buffers for UDP/RAW sockets is updated to match the linux value of 212KiB up from the really low current value of 32 KiB. Updates #3043 Fixes #3043 PiperOrigin-RevId: 318089805
2020-06-23Add support for SO_REUSEADDR to TCP sockets/endpoints.Ian Gudger
For TCP sockets, SO_REUSEADDR relaxes the rules for binding addresses. gVisor/netstack already supported a behavior similar to SO_REUSEADDR, but did not allow disabling it. This change brings the SO_REUSEADDR behavior closer to the behavior implemented by Linux and adds a new SO_REUSEADDR disabled behavior. Like Linux, SO_REUSEADDR is now disabled by default. PiperOrigin-RevId: 317984380
2020-06-19Implement UDP cheksum verification.gVisor bot
Test: - TestIncrementChecksumErrors Fixes #2943 PiperOrigin-RevId: 317348158
2020-06-18Support setsockopt SO_SNDBUF/SO_RCVBUF for raw/udp sockets.Bhasker Hariharan
Updates #173,#6 Fixes #2888 PiperOrigin-RevId: 317087652
2020-06-18Cleanup tcp.timer and tcpip.RouteGhanan Gowripalan
When a tcp.timer or tcpip.Route is no longer used, clean up its resources so that unused memory may be released. PiperOrigin-RevId: 317046582
2020-06-17TCP stat fixesMithun Iyer
Ensure that CurrentConnected stat is updated on any errors and cleanups during connected state processing. Fixes #2968 PiperOrigin-RevId: 316919426
2020-06-16Replace use of %v in tcp testsMithun Iyer
PiperOrigin-RevId: 316767969
2020-06-15TCP to honor updated window size during handshake.Mithun Iyer
In passive open cases, we transition to Established state after initializing endpoint's sender and receiver. With this we lose out on any updates coming from the ACK that completes the handshake. This change ensures that we uniformly transition to Established in all cases and does minor cleanups. Fixes #2938 PiperOrigin-RevId: 316567014
2020-06-12Allow reading IP_MULTICAST_LOOP and IP_MULTICAST_TTL on TCP sockets.Ian Gudger
I am not really sure what the point of this is, but someone filed a bug about it, so I assume something relies on it. PiperOrigin-RevId: 316225127
2020-06-10Add support for SO_REUSEADDR to UDP sockets/endpoints.Ian Gudger
On UDP sockets, SO_REUSEADDR allows multiple sockets to bind to the same address, but only delivers packets to the most recently bound socket. This differs from the behavior of SO_REUSEADDR on TCP sockets. SO_REUSEADDR for TCP sockets will likely need an almost completely independent implementation. SO_REUSEADDR has some odd interactions with the similar SO_REUSEPORT. These interactions are tested fairly extensively and all but one particularly odd one (that honestly seems like a bug) behave the same on gVisor and Linux. PiperOrigin-RevId: 315844832
2020-06-09Fix write hang bug found by syzkaller.gVisor bot
After this change e.mu is only promoted to exclusively locked during route.Resolve. It downgrades back to read-lock afterwards. This prevents the second RLock() call gets stuck later in the stack. https://syzkaller.appspot.com/bug?id=065b893bd8d1d04a4e0a1d53c578537cde1efe99 Syzkaller logs does not contain interesting stack traces. The following stack trace is obtained by running repro locally. goroutine 53 [semacquire, 3 minutes]: runtime.gopark(0xfd4278, 0x1896320, 0xc000301912, 0x4) GOROOT/src/runtime/proc.go:304 +0xe0 fp=0xc0000e25f8 sp=0xc0000e25d8 pc=0x437170 runtime.goparkunlock(...) GOROOT/src/runtime/proc.go:310 runtime.semacquire1(0xc0001220b0, 0xc00000a300, 0x1, 0x0) GOROOT/src/runtime/sema.go:144 +0x1c0 fp=0xc0000e2660 sp=0xc0000e25f8 pc=0x4484e0 sync.runtime_Semacquire(0xc0001220b0) GOROOT/src/runtime/sema.go:56 +0x42 fp=0xc0000e2690 sp=0xc0000e2660 pc=0x448132 gvisor.dev/gvisor/pkg/sync.(*RWMutex).RLock(...) pkg/sync/rwmutex_unsafe.go:76 gvisor.dev/gvisor/pkg/tcpip/transport/udp.(*endpoint).HandleControlPacket(0xc000122000, 0x7ee5, 0xc00053c16c, 0x4, 0x5e21, 0xc00053c224, 0x4, 0x1, 0x0, 0xc00007ed00) pkg/tcpip/transport/udp/endpoint.go:1345 +0x169 fp=0xc0000e26d8 sp=0xc0000e2690 pc=0x9843f9 ...... gvisor.dev/gvisor/pkg/tcpip/transport/udp.(*protocol).HandleUnknownDestinationPacket(0x18bb5a0, 0xc000556540, 0x5e21, 0xc00053c16c, 0x4, 0x7ee5, 0xc00053c1ec, 0x4, 0xc00007e680, 0x4) pkg/tcpip/transport/udp/protocol.go:143 +0xb9a fp=0xc0000e8260 sp=0xc0000e7510 pc=0x9859ba ...... gvisor.dev/gvisor/pkg/tcpip/transport/udp.sendUDP(0xc0001220d0, 0xc00053ece0, 0x1, 0x1, 0x883, 0x1405e217ee5, 0x11100a0, 0xc000592000, 0xf88780) pkg/tcpip/transport/udp/endpoint.go:924 +0x3b0 fp=0xc0000ed390 sp=0xc0000ec750 pc=0x981af0 gvisor.dev/gvisor/pkg/tcpip/transport/udp.(*endpoint).write(0xc000122000, 0x11104e0, 0xc00020a460, 0x0, 0x0, 0x0, 0x0, 0x0) pkg/tcpip/transport/udp/endpoint.go:510 +0x4ad fp=0xc0000ed658 sp=0xc0000ed390 pc=0x97f2dd PiperOrigin-RevId: 315590041
2020-06-07netstack: parse incoming packet headers up-frontKevin Krakauer
Netstack has traditionally parsed headers on-demand as a packet moves up the stack. This is conceptually simple and convenient, but incompatible with iptables, where headers can be inspected and mangled before even a routing decision is made. This changes header parsing to happen early in the incoming packet path, as soon as the NIC gets the packet from a link endpoint. Even if an invalid packet is found (e.g. a TCP header of insufficient length), the packet is passed up the stack for proper stats bookkeeping. PiperOrigin-RevId: 315179302
2020-06-05Drop flaky tag.Adin Scannell
PiperOrigin-RevId: 315018295
2020-06-05Centralize the categories of endpoint states.Rahat Mahmood
PiperOrigin-RevId: 314996457
2020-06-05Fix error code returned due to Port exhaustion.Bhasker Hariharan
For TCP sockets gVisor incorrectly returns EAGAIN when no ephemeral ports are available to bind during a connect. Linux returns EADDRNOTAVAIL. This change fixes gVisor to return the correct code and adds a test for the same. This change also fixes a minor bug for ping sockets where connect() would fail with EINVAL unless the socket was bound first. Also added tests for testing UDP Port exhaustion and Ping socket port exhaustion. PiperOrigin-RevId: 314988525
2020-06-05Fix copylocks error about copying IPTables.Ting-Yu Wang
IPTables.connections contains a sync.RWMutex. Copying it will trigger copylocks analysis. Tested by manually enabling nogo tests. sync.RWMutex is added to IPTables for the additional race condition discovered. PiperOrigin-RevId: 314817019
2020-06-05Handle TCP segment split cases as per MSS.Mithun Iyer
- Always split segments larger than MSS. Currently, we base the segment split decision as a function of the send congestion window and MSS, which could be greater than the MSS advertised by remote. - While splitting segments, ensure the PSH flag is reset when there are segments that are queued to be sent. - With TCP_CORK, hold up segments up until MSS. Fix a bug in computing available send space before attempting to coalesce segments. Fixes #2832 PiperOrigin-RevId: 314802928
2020-06-03Pass PacketBuffer as pointer.Ting-Yu Wang
Historically we've been passing PacketBuffer by shallow copying through out the stack. Right now, this is only correct as the caller would not use PacketBuffer after passing into the next layer in netstack. With new buffer management effort in gVisor/netstack, PacketBuffer will own a Buffer (to be added). Internally, both PacketBuffer and Buffer may have pointers and shallow copying shouldn't be used. Updates #2404. PiperOrigin-RevId: 314610879
2020-06-03Avoid TCP segment split when out of sender window.Mithun Iyer
If the entire segment cannot be accommodated in the receiver advertised window and if there are still unacknowledged pending segments, skip splitting the segment. The segment transmit would get retried by the retransmit handler. PiperOrigin-RevId: 314538523
2020-05-29Move TCP to CLOSED from SYN-RCVD on RST.Mithun Iyer
RST handling is broken when the TCP state transitions from SYN-SENT to SYN-RCVD in case of simultaneous open. An incoming RST should trigger cleanup of the endpoint. RFC793, section 3.9, page 70. Fixes #2814 PiperOrigin-RevId: 313828777
2020-05-20Internal change.gVisor bot
PiperOrigin-RevId: 312559963
2020-05-15Minor formatting updates for gvisor.dev.Adin Scannell
* Aggregate architecture Overview in "What is gVisor?" as it makes more sense in one place. * Drop "user-space kernel" and use "application kernel". The term "user-space kernel" is confusing when some platform implementation do not run in user-space (instead running in guest ring zero). * Clear up the relationship between the Platform page in the user guide and the Platform page in the architecture guide, and ensure they are cross-linked. * Restore the call-to-action quick start link in the main page, and drop the GitHub link (which also appears in the top-right). * Improve image formatting by centering all doc and blog images, and move the image captions to the alt text. PiperOrigin-RevId: 311845158
2020-05-13Fix TCP segment retransmit timeout handling.Mithun Iyer
As per RFC 1122 and Linux retransmit timeout handling: - The segment retransmit timeout needs to exponentially increase and cap at a predefined value. - TCP connection needs to timeout after a predefined number of segment retransmissions. - TCP connection should not timeout when the retranmission timeout exceeds MaxRTO, predefined upper bound. Fixes #2673 PiperOrigin-RevId: 311463961
2020-05-13Stub support for TCP_SYNCNT and TCP_WINDOW_CLAMP.Bhasker Hariharan
This change adds support for TCP_SYNCNT and TCP_WINDOW_CLAMP options in GetSockOpt/SetSockOpt. This change does not really change any behaviour in Netstack and only stores/returns the stored value. Actual honoring of these options will be added as required. Fixes #2626, #2625 PiperOrigin-RevId: 311453777
2020-05-08Send ACK to OTW SEQs/unacc ACKs in CLOSE_WAITZeling Feng
This fixed the corresponding packetimpact test. PiperOrigin-RevId: 310593470
2020-05-07Capture range variable in parallel subtestsSam Balana
Only the last test was running before since the goroutines won't be executed until after this loop. I added t.Log(test.name) and this is was the result: TestListenNoAcceptNonUnicastV4/SourceUnspecified: DestOtherMulticast TestListenNoAcceptNonUnicastV4/DestUnspecified: DestOtherMulticast TestListenNoAcceptNonUnicastV4/DestOtherMulticast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/SourceBroadcast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/DestOurMulticast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/DestBroadcast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/SourceOtherMulticast: DestOtherMulticast TestListenNoAcceptNonUnicastV4/SourceOurMulticast: DestOtherMulticast https://github.com/golang/go/wiki/TableDrivenTests#parallel-testing PiperOrigin-RevId: 310440629
2020-05-07Fix bugs in SACK recovery.Bhasker Hariharan
Every call to sender.NextSeg does not need to iterate from the front of the writeList as in a given recovery episode we can cache the last nextSeg returned. There cannot be a lower sequenced segment that matches the next call to NextSeg as otherwise we would have returned that instead in the previous call. This fixes the issue of excessive CPU usage w/ large send buffers where we spend a lot of time iterating from the front of the list on every NextSeg invocation. Further the following other bugs were also fixed: * Iteration of segments never sent in NextSeg() when looking for segments for retransmission that match step1/3/4 of the NextSeg algorithm * Correctly setting rescueRxt only if the rescue segment was actually sent. * Correctly initializing rescueRxt/highRxt when entering SACK recovery. * Correctly re-arming the timer only on retransmissions when SACK is in use and not for every segment being sent as it was being done before. * Copy over xmitTime and xmitCount on segment clone. * Move writeNext along when skipping over SACKED segments. This is required to prevent spurious retransmissions where we end up retransmitting data that was never lost. PiperOrigin-RevId: 310387671
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 21:49:55 +0000